Scribd
Upload
39 views2 pages

Rubber Profile EPDM Rubber Gaskets

The document provides a product data sheet for EPDM gaskets, detailing material characteristics and test results. Key attributes include good physical strength, very low gas permeability, and excellent ozone and UV resistance. Test results show that the gasket meets or exceeds various ASTM and ISO standards for hardness, tensile strength, and compression set.

Uploaded by

saminabbat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

Rubber Profile EPDM Rubber Gaskets

The document provides a product data sheet for EPDM gaskets, detailing material characteristics and test results. Key attributes include good physical strength, very low gas permeability, and excellent ozone and UV resistance. Test results show that the gasket meets or exceeds various ASTM and ISO standards for hardness, tensile strength, and compression set.

Uploaded by

saminabbat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT DATA SHEET FOR EPDM GASKET

Material Characteristics, Test Standards and Results of a typical EPDM Gasket

Description RESULTS
Hardness Range (Shore A) 250 - 900

Physical Strength Good

Compression Set Good

Tear & Abrasion Resistance Good

Resilience Very Good

Permeability to Gases Very low

Ozone and UV Resistance Excellent

Electrical Strength Excellent

S. No. Characteristics Standard Result as per Actual


Tested Standard Results
Followed

1. Hardness ASTM-D2240 600 (+/-50) 650


(Shore A)

2. Tensile Strength ASTM-D412 > 110 115


(Kgf/cm2)

3. Elongation at Break ASTM-D412 > 250 280


(%age)
4. Tear Strength ASTM-D624 -
(Kgf/cm)

5. Specific Gravity ISO-2781 1.30 1.22


(max.)

6. Compression Set (max. %) ASTM-D395 30 28

At 1000 for 22 Hrs.

7. AGE RESISTANCE ASTM-D573

a. Hardness +10 (max) +7

b. Tensile Strength (%) +/-15% (max) +12


Elongation at Break (%) +/-40% (max) -22
c.
8. Ozone Resistance ASTM-D1149 No visible Cracks No visible
Cracks

You might also like