Digital Technology / Microcomputer Technology

DIGI BOARD 2
Type 3910

Function Groups of the

DIGI BOARD 2

- 2 input keyboards with

4 pairs of keys (L/H) each

- Clock generator with

divider, TTL level, crys-

.
tal-controlled

- DC signal source 0...5 V/

.
Universal training and exercise unit for fundamental digital technology/
10 mA
microcomputer technology
- Hexadecimal/dual coding

..
The DIGI BOARD 2 contains all function groups and the power supply for
switch (double)
fast experiment setup
- LED display, divided into 3
Can be used as a desktop, demonstration or portable training unit

.
groups with the colours
Individual expansion possibilities red, yellow, green

With an adapter for connection to a computer - HIGH/LOW, for tapping

HIGH, LOW states
- 7-segment display
The DIGI BOARD 2 has The DIGI BOARD 2 can be nology” (Type V 0160) is of-
(2-digit), with decoder:
been developed for the in- set up as a desktop unit for fered together with the DIGI
dual/7-segment
struction and detailed study conducting experiments or BOARD 2.
of fundamental digital tech- suspended in a rack for This manual contains detai- - Adapter (2 mm jacks/
nology, non-contact control demonstration purposes. led experiment instructions SUB-D socket), for adapt-
engineering and microcom- with problems and solutions ing 2 mm jacks to SUB-D
puter technology. The DIGI BOARD 2 can be section. connector (25-pin), pins
converted into a portable 1...13 and 18 assigned
All the function groups re- training unit by simply screw-
- 8 AND gates, with pull-up
quired for conducting experi- ing it into a Box: All the ex-
resistors, one of which is
ments in digital technology periments can be conducted
disconnectable
are integrated in the DIGI directly in the Box. Dust-free
BOARD 2 and supplied with storage and protection - 6 OR gates, with pull-down
power by a built-in power against transport damages resistors, one of which is
supply unit. are further advantages of the disconnectable
The individual function Box version.
- 3 AND/OR combi-gates
groups are connected in The experiment manual
2 mm connection technique. „Experiments in Digital Tech- - 1-bit comparator

hps SystemTechnik Phone: + 49 751 / 5 60 75 80

Lehr- + Lernmittel GmbH Fax: + 49 751 / 5 60 75 17
0.7.0

Altdorfer Strasse 16 Web: www.hps-systemtechnik.com

88276 Berg (Germany) E-Mail: [email protected]
 Digital Technology / Microcomputer Technology

Expansion Possibilities

- EEPROM 8x4, storage The components listed below are used for setting up experi-
time without power supply ments above and beyond those described in the experiment
DIGI BOARD 2 approx. 1 hour manual „Experiments in Digital Technology” (Type V 0160).
Type 3910 - AD / DA converter (4-bit) - IC BOARD (Type 3530)

- Two slots for expanding a - IC Socket, dual-in-line (Type 9156)

circuit with additional
- IC Socket, 20-pin (Type 9156.2)
plug-in modules
- 4-bit comparator
- IC Socket, 28-pin (Type 9156.3)
- 4 JK-flipflops, can also be
- Assembly kit comprising:
used as RS flipflops Recommended Empty Housings (Type 9152.7)
- 4 D-flipflops Accessories Universal PCB, with dot grid (Type 9167)
Universal PCB, with line grid (Type 9167.1)
- 2 adders (4-bit), with input
- Experiment manual: Jacks (Type 9168), Stickers (Type 9162.5-6)
and output carry
„Experiments in
- Monoflop, settable times: Digital Technology”
0.1 s; 1 s; 5 s (Type V 0160) with prob- Technical Data
lems and solutions section
- Multiplexer, 4 channels
for the following subjects:
- Demultiplexer, 4 channels
- Basic logical circuits Mains connection
- Shift register (4-bit), paral- - Voltages (via LE connector): 230 V AC/115 V (110 V) AC;
- Schmitt triggers
lel and serial operation 30 VA; 50 ...60 Hz
possible, bidirectional - Bistable flipflops
Integrated power supply for additional plug-in modules
- ALU, for conducting 16 - Monostable flipflops 5 V DC/max. 1 A; the power is supplied via the plugs in the base
arithmetic and 16 logical of the modules.
- Code converters, coders
computing operations with DC voltage source +5 V/0.5 A
4-bit dual numbers - Computing circuits For connecting external equipment
- Binary counter (4-bit), - Counting circuits IC components
up/down counter All IC components are inserted in sockets.
- Register circuits
- 2 inverters with open col- Mechanical design
- Multiplex mode
lector (pull-up resistors The front panel of the DIGI BOARD 2 is made of 5 mm thick
can be connected) - ALU laminate, matt blue in colour with white printing representing the
built-in function groups.
- 2 Schmitt triggers, invert- - Memory circuits The rear of the DIGI BOARD 2 is protected with a grey plastic
ing cover. Its shape allows the Board to be placed at an ergonomi-
- Analog-digital converter,
cally favourable angle for example on a table.
- Units complements for digital-analog converter
negating a 4-bit binary Dimensions and weights
- Set of Accessories
number - Board version, Type 3910: 532 x 297 x 95 mm (w x h x d);
(Type 3910.1), comprising weight: 3.5 kg
- Antivalence and equiva- 2 mm connecting leads - Box version, Type 3910 and Type 3910.20:
lence gates (60 in all) 580 x 450 x 155 mm;
weight: 7.5 kg
- RAM 8x4, static RAM,
8 addresses, 4 bits data
width
Subject to technical modifications.

Training in Technology