Test Report

File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Applicant .................................... : Sunrise energy Co., Ltd.

No.20 Tongzi River West Road, Zhonglou Development Zone,
Changzhou Jiangsu, 213023 P.R. China
Manufacturer ............................ : Sunrise energy Co., Ltd.
No.20 Tongzi River West Road, Zhonglou Development Zone,
Changzhou Jiangsu, 213023 P.R. China
Order No. ................................... : QT-PVP07062/20P_R1
Date of Application .................... : 09/16/2020
Product ...................................... : Crystalline Silicon Photovoltaic Modules
Module type(s) ........................... : PV Modules with 6" Half-cut Mono-crystalline Silicon Solar Cells:
144 cells: SR-M672430HLP
General Information
• Maximum System Voltage .... : DC 1500V
• Electrical Protection Class .... : Class II
• Fire Safety Class .................. : N/A
Type of examination .................. : Commission testing only
Testing Period ........................... : 09/07/2020 - 11/02/2020
Testing Laboratory..................... : TÜV Nord PV Science and Technology Co., Ltd.
2/F., Building 4, No. 880, Ziyue Road, Minhang District, Shanghai,
China

Test results listed in this test report refer exclusively to the mentioned test sample.

Partly copying is not permitted without explicit agreement of the owner.

The submitted test samples as described in the reports hereunder are based on the requirements:
IEC 61215-2:2016 / EN 61215-2:2017 + AC:2017 + AC:2018 “Terrestrial photovoltaic (PV) modules - Design
qualification and type approval - Part 2: Test procedures”

PV-T-086 TRF 61215 61730 Page 2 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

List of contents
List of contents..............................................................................................................................3
Summary of testing .......................................................................................................................4
General remarks ............................................................................................................................5
General product information ........................................................................................................6
Module type: SR-M672430HLP ...................................................................................................6
Module group assignment ............................................................................................................7
Module type: SR-M672430HLP ...................................................................................................7
Test result overview ......................................................................................................................8
Module type: SR-M672430HLP ...................................................................................................8
Test results of IEC / EN 61215-2 ...................................................................................................9
Module type: SR-M672430HLP ...................................................................................................9
4.1 Visual inspection (initial) - MQT01 ....................................................................................9
4.3 Insulation test (initial) - MQT03 .......................................................................................11
4.15 Wet leakage current test (initial) - MQT15 ....................................................................12
4.13 Damp heat 1000 test - MQT13 .....................................................................................13
Annex 1: List of measurement equipment.................................................................................16
Annex 2: Statement of the estimated uncertainty of the test results.......................................17
Annex 3: Photos ..........................................................................................................................18
Module type: SR-M672430HLP .................................................................................................18
Annex 4: Photos of insulation tape ............................................................................................20

PV-T-086 TRF 61215 61730 Page 3 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Summary of testing
According to the enquiry of the applicant, a commission test was performed according to IEC 61215-2:2016.
Test items see page 7 for details.
Module type SR-M672430HLP was delivered to lab and was conducted with all the related tests.
All tests were successfully completed.

PV-T-086 TRF 61215 61730 Page 4 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

General remarks
Test item particulars:
Accessories and detachable parts included in the N/A
evaluation ................................................................. :
Options included ....................................................... : N/A
Abbreviations used in the report:
HF - Humidity Freeze TC - Temperature Cycling
DH - Damp Heat Vmpp - Maximum power voltage
Impp - Maximum power current Voc - Open circuit voltage
Isc - Short circuit current FF - Fill Factor
Pmpp - Maximum power α - Current temperature coefficient
NMOT - Nominal Module Operating Temperature β - Voltage temperature coefficient
STC - Standard Test Conditions γ - Power temperature coefficient
CTI - Comparative Tracking Index PTI - Proof Tracking Index
RTI - Relative Temperature Index RTE - Relative Thermal Endurance index
TI - Temperature Index DTI - Distance through insulation
Cl - Clearances Cr - Creepage distances
PD - Pollution Degree MG - Material Groups
Possible test case verdicts:
Test case does not apply to the test object .............. : Not Applicable (N/A)
Test object does meet the requirement .................... : Pass (P)
Test object does not meet the requirement .............. : Fail (F)
Other remarks:
The test verdicts presented in this report relate only to the object tested.
This report shall not be reproduced except in full, without the written approval of the issuing testing
laboratory.

“(see Annex #)” refers to additional information appended to the report.

“(see Table #)” refers to a table appended to the report.

Power degradation data expressed in negative value indicates a reduction of maximum power output.
Power degradation data expressed in positive value indicates an increment of maximum power output.

Throughout this report, a point is used as the decimal separator.

PV-T-086 TRF 61215 61730 Page 5 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

General product information

Module type: SR-M672430HLP
Product Electrical Ratings at STC:
Nominal maximum power (Pmax) [W] with tolerance .......: 430 (0 ~ +3%)
Nominal open circuit voltage at (Voc) [V] with tolerance ...: 49.22 ±3%
Nominal maximum power voltage (Vmpp) [V] ...................: 40.59
Nominal short circuit current at (Isc) [A] with tolerance .....: 11.21 ±3%
Nominal maximum power current (Impp) [A] .....................: 10.60
Product Safety Ratings:
Maximum system voltage [V].............................................: 1500
Fuse rating [A] ...................................................................: 20
Safety class in accordance with IEC 61140 ......................: Class II
Fire safety class .................................................................: N/A
Recommended maximum series module configurations ..: N/A
Recommended maximum parallel module configurations : N/A

PV-T-086 TRF 61215 61730 Page 6 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Module group assignment

Module type: SR-M672430HLP
Sample # Serial number Dimension (l x w x h) [mm] Remark
1 H72MMA20071610014 2115 x 1052 x 40 DH1000

PV-T-086 TRF 61215 61730 Page 7 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
Clause Requirement + Test Result - Remark Verdict

Test result overview

Module type: SR-M672430HLP
Initial examinations -
MQT01 Visual inspection ................................................ : See table 4.1 P
MQT03 Insulation test ..................................................... : See table 4.3 P
MQT15 Wet leakage current test .................................... : See table 4.15 P
MQT02 Maximum power determination .......................... : See table 4.2 P

Sample 1# -
MQT13 Damp heat test (1000h) ..................................... : See table 4.13 P

PV-T-086 TRF 61215 61730 Page 8 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

Test results of IEC / EN 61215-2

Module type: SR-M672430HLP
4.1 Visual inspection (initial) - MQT01 -
Test date [MM/DD/YYYY]..................... : 09/07/2020 -
Sample # Nature and position of initial findings - comments or attach photos -
1 No visual defects P
Supplementary information: N/A

PV-T-086 TRF 61215 61730 Page 9 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

4.2 Maximum power determination (initial) - MQT02 -

Test date [MM/DD/YYYY]..................... : 09/07/2020 -
Ambient temperature [°C] ..................... : Corrected to 25.0 -
Irradiance [W/m2].................................. : Corrected to 1000 -
Sample # Voc [V] Vmp [V] Isc [A] Imp [A] Pmp [W] FF [%] -
1 49.02 41.47 10.74 10.28 426.3 80.97 -
Supplementary information: N/A

PV-T-086 TRF 61215 61730 Page 10 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

4.3 Insulation test (initial) - MQT03 -

Test date [MM/DD/YYYY]..................... : 09/07/2020 -
Test voltage applied [V] ........................ : 2 minutes of 1500 and 1 minute of 4000 -
Sample # Required [MΩ] Measured [MΩ] Dielectric breakdown? -
1 18.0 >1000 No P
Supplementary information: Minimum requirement according to the standard is 40MΩ·m2. Area of the module is
2.22m2.

PV-T-086 TRF 61215 61730 Page 11 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

4.15 Wet leakage current test (initial) - MQT15 -

Test date [MM/DD/YYYY]..................... : 09/07/2020 -
Test voltage applied [V] ........................ : 2 minutes of 1500 -
Solution resistivity [Ω/cm] / <3500 ....... : 1977 -
Solution temperature [°C] / 22±2 ......... : 21.9 -
Sample # Required [MΩ] Measured [MΩ] -
1 18.0 >1000 P
Supplementary information: Minimum requirement according to the standard is 40MΩ·m2. Area of the module is
2.22m2.

PV-T-086 TRF 61215 61730 Page 12 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

4.13 Damp heat 1000 test - MQT13 -

Sample # ................................................ : 1 -
Test date [MM/DD/YYYY] / start - end .. : 09/11/2020 - 11/02/2020 -
Total hours [hours] ............................... : 1000 -
Supplementary information: N/A
4.1 Visual inspection (after damp heat 1000 test) - MQT01 -
Test date [MM/DD/YYYY]..................... : 11/02/2020 -
Sample # Nature and position of initial findings - comments or attach photos -
1 No visual defects P
Supplementary information: N/A
4.2 Maximum power determination (after damp heat 1000 test) - MQT02 -
Test date [MM/DD/YYYY]..................... : 11/02/2020 -
Ambient temperature [°C] ..................... : Corrected to 25.0 -
Irradiance [W/m2].................................. : Corrected to 1000 -
Sample # Voc [V] Vmp [V] Isc [A] Imp [A] Pmp [W] FF [%] -
1 48.86 41.12 10.60 10.13 416.5 80.39 -
Supplementary information: N/A
4.3 Insulation test (after damp heat 1000 test) - MQT03 -
Test date [MM/DD/YYYY]..................... : 11/02/2020 -
Test voltage applied [V] ........................ : 2 minutes of 1500 and 1 minute of 4000 -
Sample # Required [MΩ] Measured [MΩ] Dielectric breakdown? -
1 18.0 >1000 No P
Supplementary information: Minimum requirement according to the standard is 40MΩ·m2. Area of the module is
2.22m2.

PV-T-086 TRF 61215 61730 Page 13 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

4.15 Wet leakage current test (after damp heat 1000 test) - MQT15 -
Test date [MM/DD/YYYY]..................... : 11/02/2020 -
Test voltage applied [V] ........................ : 2 minutes of 1500 -
Solution resistivity [Ω/cm] / <3500 ....... : 2016 -
Solution temperature [°C] / 22±2 ......... : 22.4 -
Sample # Required [MΩ] Measured [MΩ] -
1 18.0 >1000 P
Supplementary information: Minimum requirement according to the standard is 40MΩ·m2. Area of the module is
2.22m2.

PV-T-086 TRF 61215 61730 Page 14 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02
IEC / EN 61215-2
Clause Requirement + Test Result - Remark Verdict

Power degradation of each module after each test sequences -

Sample # Pmp (initial) Pmp (final) Reproducibility Power Maximum allowed
degradation degradation -
[W] [W] r [%] [%] [%]
1 426.3 416.5 0.00 -2.30 -5.00 P
Supplementary information: Maximum allowed degradation [%] = -(5 + 0.95 x r)

PV-T-086 TRF 61215 61730 Page 15 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Annex 1: List of measurement equipment

Measurement / testing Measuring equipment Equipment ID Calibration due date
Visual inspection Luminometer TNRDTO002 12/18/2020
Maximum power Pulsed Solar Simulator TNRDEQ001 11/06/2020
determination
Insulation test Withstanding voltage/Insulation TNRDTI020 09/28/2021
resistance tester
Damp heat test High and low temperature chamber TNRDEQ006 11/04/2020
Wet leakage current test Withstanding voltage/ TNRDTI020 09/28/2021
Insulation resistance
tester
Conductive meter TNRDTI004 12/16/2020

PV-T-086 TRF 61215 61730 Page 16 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Annex 2: Statement of the estimated uncertainty of the test results

The total measuring uncertainty of Pmpp is ≤ 2.68%
The total measuring uncertainty of Isc is ≤ 2.12%
The total measuring uncertainty of Voc is ≤ 0.82%

PV-T-086 TRF 61215 61730 Page 17 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Annex 3: Photos
Module type: SR-M672430HLP

Front overview Back overview

Label Solar cell

Frame Grounding Mark

PV-T-086 TRF 61215 61730 Page 18 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Junction box (FT20xv) Junction box (opened)

N/A

Bypass diode (Junction box is potted) Cable (H1Z2Z2-K 1x4.0mm2)

Mark (Do not disconnect under load) Connectors (not specified)

PV-T-086 TRF 61215 61730 Page 19 of 20 Version 1.5

 Test Report
File No.: PVP07062/20P-02 Test Report No.: TRPVP07062/20P/02

Annex 4: Photos of insulation tape

Sample #1 Sample #1
----- End of test report -----

PV-T-086 TRF 61215 61730 Page 20 of 20 Version 1.5