0022 : ‫رقم المادة‬ Physics : ‫المادة‬ 0202 ‫ عام‬/ ‫الدور الثانى‬

Answer the following groups

Group 1 :
A- Write the scientific term expressed by the following statements:

The maximum displacement of a vibrating body away from the original

1 position
………………………………………………………………………………
The distance taken by a vibrating body to make one complete wave
2 ………………………………………………………………………………

The angle of incidence in the denser medium (1st medium) that corresponds to an
angle of refraction in the less dense medium (2nd medium) equal to 90°
3
…………………………………………………………………………

B-Put circle around the correct answer

A vibrating body makes 1200 complete vibrations in a minute. Then the value of
4 the frequency is……..
A) 20 Hz B) 1200 Hz C) 72000 Hz D) 0.05 Hz
To calculate the speed of propagation of a wave (v) in a certain medium, the
5 relation is used ………….
A) B) C) D)
From the Applications of total internal reflection is (are)….....
6 A) Reflecting prism B) Optical fiber
C) Simple pendulum D) A and B together
C-Put sign (√) in front of correct statement or sign () in front of incorrect one in
each of the following :
The Statement
The light falls normally (perpendicularly) on a reflecting surface, it will reflect on
7
itself. ( )
8 Light is a mechanical wave. ( )
D-Answer the following:
If the absolute refractive index of the glass is 1.5, calculate the speed of light
in the glass if you know that the speed of light in vacuum or air = 3 x 108 m/s
9
10 ………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………

5 ‫ من‬2 ‫الصفحة‬
 0022 : ‫رقم المادة‬ Physics : ‫المادة‬ 0202 ‫ عام‬/ ‫الدور الثانى‬
Group 2 :
A-Put circle around the correct answer
If the temperature of a person increases by 2 K on Kelvin scale, then the temperature
will increase on Celsius scale by……….
11
A) 2 oC B) 275 oC C) 271 oC D) 269 oC

The Thermal internal energy of a body is ……..

A) The kinetic energy of the body’s particles only.
12 B) The potential energy of the body’s particles only
C) The sum of the kinetic energy and potential energy of its molecules.
D) No correct answer from the above.
B-Fill in the following table by entering the appropriate temperature for each unit of
measurement
Temperature Scale TC TF TK
13
14 The freezing temperature of pure ………… …………….. ..……
15 water (ice point)

C- Put sign (√) in front of correct statement or sign () in front of incorrect one in
each of the following :
When the body loses a quantity of heat energy then the velocity of the molecules
16 decreases. ( )
17 Thermometers are devices used to measure the thermal energy of a body. ( )
The specific heat of a substance does not depend on mass of the substance.
18
( )
D-Answer the following:
If you know that the amount of heat needed to raise the temperature of a
certain mass of a copper from 10 degree Celsius to 60 degree Celsius is equal
to 5850 Joule. Calculate the heat capacity of copper
19
20 .……………………………………………………………………………………
………………………………………………………………………………………
.……………………………………………………………………………………
………………………………………………………………………………………

5 ‫ من‬0 ‫الصفحة‬
 0022 : ‫رقم المادة‬ Physics : ‫المادة‬ 0202 ‫ عام‬/ ‫الدور الثانى‬
Group 3:
A-Put circle around the correct answer

A metallic wire whose length is (ℓ) and whose cross-sectional area is (A). If the length
21 of the wire only is doubled, then the electric resistance of the wire will...
A) increase to double. B) decrease to half
C) increase four times D) remain constant
Two identical resistors were connected together in series, so the equivalent resistance is
22 80 Ω, so the value of one of them is equal to …………….
A) 80 Ω B) 40 Ω C) 20 Ω D)10 Ω
B- Write the scientific term expressed by the following statements:

The maximum displacement of a vibrating body away from the original

23
position ………………………………………………………………………………
The distance taken by a vibrating body to make one complete wave
24 ………………………………………………………………………………

C- Mention only one factor affecting each of the following?

The electric resistivity (specific resistance) of a material

25 ………………………………………………………………………………….

The total intensity of electric current through a closed circuit

26 ………………………………………………………………………………….

D- Put sign (√) in front of correct statement or sign () in front of incorrect one in
each of the following :
The measuring unit of the potential difference between two points is Ampere.
27 ( )
The electrical power (Pw) consumed in a resistor can be obtained using the relation
28 Pw = I2R ( )
E-Answer the following:
An electric resistance of 12 Ω is connected to a battery of zero internal
resistance and its electromotive force is 12 V. Calculate the total current
passing through the circuit.
29 ………………………………………………………………………………………
30 ………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………

5 ‫ من‬3 ‫الصفحة‬
 0022 : ‫رقم المادة‬ Physics : ‫المادة‬ 0202 ‫ عام‬/ ‫الدور الثانى‬
Group 4:
A-Put circle around the correct answer
The magnetic flux density at a point with a perpendicular distance d from the wire
31 through which a current of intensity I passes is determined from the relation...........

Circular coil of number of turns N and its radius r, an electric current of intensity I pass
32 through, so the flux density at the center of the circular coil is B. If a current of intensity
2I passes through the same coil, the magnetic flux density at the center becomes ….
A) B/4 B) B/2 C) B D) 2B
To determine the direction of the magnetic field resulting from the passage of an electric
33 current through a solenoid,….. ….is used.
A) Ampere’s Right-handed rule. B) Ampere’s left-handed rule.
C) Fleming Right-handed rule. D) Fleming left-handed rule.
All of the following from the factors affecting the magnitude of the magnetic force
acting on a straight wire carrying an electric current placed perpendicular to a uniform
34
magnetic field except...
A) The length of the wire L B) The intensity of the electric current I
C) Magnetic flux density B D) Direction of electric current flow
C- Put sign (√) in front of correct statement or sign () in front of incorrect one in
each of the following :

The density of magnetic field produced by a solenoid carrying a current at a point on

35 its interior axis increases when a soft iron bar inserted in it. ( )
When a current I1 passes in a straight wire and a current I2 passes in another straight
36 wire parallel to the first wire and in the same direction as I1, a mutual repulsive force
between the two wires is formed. ( )
The direction of the magnetic field resulting by the flow of current in an electrical
37 conductor is reversed when the direction of current flow in the conductor is reversed.
( )
The magnetic permeability (µ) is the ability of medium to penetrate the magnetic flux
38 lines. ( )

D-Answer the following

30cm long wire carries a current of 4A and placed in a uniform magnetic field of
density 0.5T. Calculate the force acting on the wire if it is placed inclined 30o to
the magnetic field
39 …………………………………………………………………………………………..
40 ………………………………………………………………………………………….
…………………………………………………………………………………………..
………………………………………………………………………………………….

5 ‫ من‬2 ‫الصفحة‬
 0022 : ‫رقم المادة‬ Physics : ‫المادة‬ 0202 ‫ عام‬/ ‫الدور الثانى‬
Group5:
A-Put (√) in front of correct statement or ()front of incorrect one in the following :
The induced electromotive force between two ends of a straight wire moving in a
41
uniform magnetic field is maximum when the wire moves parallel to the direction
of the magnetic field. ( )
An ideal transformer, the number of turns in the primary and secondary coils is
42 200 and 800 respectively. The primary coil is connected to a 220 volt AC source.
Then the secondary coil voltage is 55 volt. ( )
An alternating current generator (dynamo) is a device used to convert the
43
mechanical energy into electrical energy ( )
The self-induction coefficient of a coil depends on the presence of an iron core
44
inside the coil. ( )
B-Write the scientific term expressed by the following statement
The induced current must be in a direction such as to oppose the change producing it.
45
………………………………………………………………………………………
The ratio between the output electric power in the secondary coil to the input electric
46 power in the primary coil in the electric transformer.
…………………………………………………………………………………………
c-Answer the following
A rod of copper of length 30cm moves with velocity 0.5m/second in a
perpendicular direction to a magnetic field of density 0.8T. Calculate the emf
induced in such a rod.
47 ……………………………………………………………………………………………
48 ……………………………………………………………………………………………
……………………………………………………………………………………………
……………………………………………………………………………………………

Two facing coils, when the current intensity in one of them is changed from 4A to
zero in 0.01 sec. An induced emf equal 40 volts is generated in the other coil.
Calculate the mutual induction coefficient
……………………………………………………………………………………………
49
……………………………………………………………………………………………
50
……………………………………………………………………………………………
……………………………………………………………………………………………

‫انتهت األسئلة‬

5 ‫ من‬5 ‫الصفحة‬