Scribd
Upload
23 views1 page

CAMT-069-24VD-Drift 11 2 1-16

The Visual and Dimensional Inspection Report from SakhTechControl, Ltd details an inspection of a drift tool for gate valves conducted for Cameron Services on May 23, 2024. The report includes measurements of the outside diameter of the tool, indicating that all dimensions fall within specified tolerances and the tool is accepted. The inspection utilized a dial micrometer and was performed at the Cameron base in Yuzhno-Sakhalinsk.

Uploaded by

a.solvev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views1 page

CAMT-069-24VD-Drift 11 2 1-16

The Visual and Dimensional Inspection Report from SakhTechControl, Ltd details an inspection of a drift tool for gate valves conducted for Cameron Services on May 23, 2024. The report includes measurements of the outside diameter of the tool, indicating that all dimensions fall within specified tolerances and the tool is accepted. The inspection utilized a dial micrometer and was performed at the Cameron base in Yuzhno-Sakhalinsk.

Uploaded by

a.solvev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VISUAL,DIMENSIONAL INSPECTION REPORT

SakhTechControl, Ltd
Report No CAMT-069VD/24
Mira Ave, Building 1B,
Yuzhno-Sakhalinsk,
693012, Russia
Tel./Fax: (4242) 46-74-18

Customer: Cameron Services Reference Standard : Drift


API Specification
bar inspection,calibration
6A / ISO 10423and testing # QC-EMM-EQRM-7.6-001 Date: 23.05.2024
Location: Yuzhno-Sakhalinsk;Cameron base
Type of inspection: Visual, Dimensional Inspection Apparatus :Dial micrometer 0-6" S/N 340-712-30 valid to 09.2024 Request # 1931-S
Description of Tools: Drift for gate valves

OUTSIDE DIAMETER (all measurements are in inches )


Length
Tool Description Serial No
(in)
Section 1 Section 2 Section 3 Condition Remarks
Dimension D1 Dimension D2 Dimension D2
(Tolerance 2.030" +.027") (Tolerance 1.900" +.027") (Tolerance 1.900" +.027")

Drift 2 1/16" 11 42 1/2" 2.048" 2.048" 1.916" 1.916" 1.917" 1.917" ACC Measurements are executed with an interval of 90 degrees

= ACCEPTED = REJECTED

You might also like