0% found this document useful (0 votes)
33 views34 pages

AlpsCloud User ManualV0.1_20240510

This user manual provides comprehensive instructions for the 'AlpsCloud' app, covering account registration, plant creation, network configuration, and management of devices and events. It is designed for AlpSolarr users and maintenance personnel to facilitate quick familiarization with the app's functionalities. Key sections include installation, account management, plant and inverter management, and troubleshooting network connections.

Uploaded by

Christo Daubern
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views34 pages

AlpsCloud User ManualV0.1_20240510

This user manual provides comprehensive instructions for the 'AlpsCloud' app, covering account registration, plant creation, network configuration, and management of devices and events. It is designed for AlpSolarr users and maintenance personnel to facilitate quick familiarization with the app's functionalities. Key sections include installation, account management, plant and inverter management, and troubleshooting network connections.

Uploaded by

Christo Daubern
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 34

User manual

—1—
Catalogue
1 Brief Introduction .............................................................................................................................3
1.1 Purpose ................................................................................................................................. 3
1.2 Scope .....................................................................................................................................3
2 Install APP .........................................................................................................................................4
2.1 IOS ......................................................................................................................................... 4
2.2 Android ................................................................................................................................. 4
2.3 Scan the code to download .................................................................................................. 4
3 Account registration .........................................................................................................................5
3.1 Account registration ............................................................................................................. 5
3.2 Fill in the Information ........................................................................................................... 5
4 Forget password ...............................................................................................................................7
4.1 Enter forgot password .......................................................................................................... 7
4.2 Forgot password ................................................................................................................... 7
5 Create plant ......................................................................................................................................8
5.1 Add device .............................................................................................................................8
5.2 Enter plant information ........................................................................................................ 9
6 Collector network .......................................................................................................................... 10
6.1 Connect network by QR code .............................................................................................10
6.2 Connect network by Bluetooth .......................................................................................... 12
6.3 Connect network through hotspots ................................................................................... 14
6.4 Connection failed ................................................................................................................16
7 Plant management .........................................................................................................................17
7.1 Enter plant overview ...........................................................................................................17
7.2 Delete plant ........................................................................................................................ 19
7.3 Edit plant .............................................................................................................................20
7.4 Share plant ..........................................................................................................................21
7.5 Transfer of plant ..................................................................................................................22
8 Inverter management .................................................................................................................... 24
8.1 Enter inverter list ................................................................................................................ 24
8.2 Parameter settings ..............................................................................................................24
8.3 Delete inverter .................................................................................................................... 26
8.4 Inverter details ....................................................................................................................26
9 Gateway management ...................................................................................................................28
9.1 Collector Details ..................................................................................................................28
9.2 Unbind collector ................................................................................................................. 29
10 Event information ........................................................................................................................ 30
11 Personalization .............................................................................................................................31
11.1 Language Switch ............................................................................................................... 31
11.2 Preferences ....................................................................................................................... 32
12 Parameter Description .................................................................................................................33

—2—
1 Brief Introduction

1.1 Purpose

This manual gives a brief introduction to the main functions of "AlpsCloud" APP account
registration, plant creation, Wi-Fi configuration etc. Provide reference and help for uses to quickly
familiarize themselves with the APP.

1.2 Scope

This manual is suitable for AlpSolarr users, pattern vendors and device maintenance
personnel who use our device.

—3—
2 Install APP

2.1 IOS

Search "AlpsColud" in the App Store

2.2 Android

Search "AlpsCloud" in the Google Play Store

2.3 Scan the code to download

—4—
3 Account registration

3.1 Account registration

Users who use "AlpsCloud" for the first time need to register an account, click "Register
Account" on [Login Page] to enter the registration page.

Figure 3-1 Account Registration

3.2 Fill in the Information

Enter a valid phone number or email address to receive the verification code. After
completing the registration information, check the box in the user agreement to indicate that you
have read and agree to the agreement.

—5—
Figure 3-2 account registration

1.If you do not receive the verification code, check whether the email address is
correct, whether the network is abnormal, and whether the verification code has
been sent to the spam mailbox.
2. If the verification code is not received, please check whether the mobile phone
number is correct, as shown in Figure 3-2.

—6—
4 Forget password

4.1 Enter forgot password

Click "Forget Password" at the lower right corner of the login window to enter the [Recover
Password] page.

Figure 4-1 Forgot password

4.2 Forgot password

After completing the information on the [Retrieve Password] page, you can reset the new
password.

Figure 4-2 retrieve password

1.If your mobile phone number or email is disabled or you cannot receive the
verification code, please contact.

—7—
5 Create plant
After logging in to AlpsCloud, you can create your own Plant and monitor the Plant
operating status and power generation data in real time.

5.1 Add device

step:
1.Go to the [Plant List] page, click the "Create Plant" button to enter the [Create Plant] page.

Figure 5-1 to create Plant


2.After entering the scanning code scanning interface, you can add the device by "scanning the
QR code" or manually entering the "serial number" and "registration code" of the device, as
shown in Figure 5-2.

Figure 5-2 add equipment

—8—
3. After entering the "Serial Number"(SN) and"Registration Code" (KEY) on the collector label cick
Next, and then jump to create Powerstationpage.
1.Please check the serial number and registration code of the device on the product
label of the collector.
2.Check the serial number and registration code of the device on the product label of
the collector.

5.2 Enter plant information

1. Entering a plant name that complies with the specification.


2. Input the correct installed capacity.
3. Select the correct grid connection date.
4. When selecting an address, make sure that the Plant address is correct (if you need to
modify it, please click on the map to select it manually).
5. Confirm the time zone where the Plant is located (incorrect time zone may cause abnormal
statistics).
6. Input the name of the person in charge of the plant.
7. Input the correct plant contact phone number.
8. After making sure the information is correct, click "Create".

Figure 5-3 create power plant information


You can click the "Complete Create" button or click "Configure Network" to operate the
collector distribution network, or you can directly go to the personal center to configure the
network for the collector.

1.The location service needs to be turned on, and the app needs to be authorized to
use the location permission.

—9—
6 Collector network
Before using the app, you need to do a WIFI network configuration on your device.Here are
the three ways to configure it.

6.1 Connect network by QR code

When connecting the device with the "scan code configuration" method, the steps are as
follows:
1. Click the bottom button "Me" to select WIFI Network Configuration from the menu.

Figure 6-1 Distribution network by scanning the code


2.Select the "Scan code configuration" connection mode for the connection operation.
3. Scan the QR code on the device.

— 10 —
Figure 6-2 Scan the QR code of the equipment
4. Automatic filling of the collector serial number;
5. Click on the connection

Figure 6-3 identifies the collector information

— 11 —
6. After connecting, jump to the WIFI connection interface, select the available WIFI, and enter
the password to connect;

Figure 6-4 Successful distribution network through scanning code


Preconditions: The Wi-Fi and location services must be enabled in advance. Ensure
that the device is powered on and that the red LED lights are always on around the
device.

6.2 Connect network by Bluetooth

When connecting a device using Bluetooth Find, the steps are as follows:
1. Click the bottom button "Me" to select WIFI Network Configuration from the menu.

Figure 6-5 Distribution network through Bluetooth search mode

— 12 —
2. Click Start Find

Figure 6-6 Find the device


3. The APP searches for the Wi-Fi devices that can be configured around you and lists them as a
list. Select a connected network that starts with "EBP-".

Figure 6-7 Connect to the collector


4. After the connection, jump to the WIFI connection interface, select the available WIFI, and
enter the password to connect;

— 13 —
Figure 6-8 Successful distribution network via Bluetooth

6.3 Connect network through hotspots

When connecting a device using Hot Find, the steps are as follows:
1. Click the bottom button "Me" to select WIFI Network Configuration from the menu.

Figure 6-9 Distribution network through hotspot

— 14 —
2. Click Start Find

Figure 6-10 start looking up


3.Click to set and select the network starting with "EAP- ******* as the last 5 digits of the device
serial number, the password is 12345678, and jump to the"Select Device"interface after
connecting.

Figure 6-11 Connect WIFI


4. Select the router to want to connect to the gateway, enter the router password and click OK.

— 15 —
5. Wait for the connection, prompt the connection "successful", click "confirm" to return to the
home page.

Figure 6-12 Successful distribution network


1. If the connection fails, click the "Retry" button to check the Wi-Fi password
2. Whether the gateway is within the signal coverage range of the router.

6.4 Connection failed

During the connection process, click the "Retry" button to check the Wi-Fi password or
check whether the gateway is within the signal coverage of the router.

— 16 —
7 Plant management
If you need to check the current status, equipment, and abnormal information of a Plant,
the specific operations are as follows.

7.1 Enter plant overview

The current state, weather information, energy flow chart, power generation chart and
other information can be viewed in the plant [Overview] page.

Figure 7-1 Plant list


step:
1. Select the Plant you want to view in[Plant list] ,and click the corresponding Plant name to enter
the Plant [Overview] page.
2."Energy Flow Diagram".
3."Use for Power Generation".
4."Generation Chart".
5.weather Information" and "Environmental Benefits".

— 17 —
Figure 7-2 Plant overview
1.2.Enter device page
On the[Overview]page of the power plant, click the "Device" menu to switch to the "Device"
page, where you can view all the devices in the power plant. In the [Device] page, click the
operation "..." button in the upper right corner, you can set an alias for the device, and you can
also configure parameters for the inverter. The steps are as follows.。

Figure 7-3 Plant equipment


1.3. Enter event list
On the [Overview] page of the Plant, click the "Event" menu to switch to the [Event] page.

— 18 —
Click any "event", and you can view the abnormal information of the current Plant on this page.

Figure 7-4 Event Details

7.2 Delete plant

When you need delete a plant. Operation steps are as follows.


1. Click the bottom button "Plant", then click the "." in the upper right corner of the plant to see
the options.
2. Select the "Delete" option in the red box and follow the prompts to complete the deletion.

Figure 7-5 Deleting Plant

3. Confirm to delete.

— 19 —
Figure 7-6 Confirm deletion
1. Only the operator who has the management authority of the deleted plant can
delete the plant.
2. The plant cannot be restored after being deleted. Please confirm before deleting!

7.3 Edit plant

When the information of a plant needs to be modified. Operation steps are as follows.
1.Click the bottom button "Plant " and click the . .." button in the upper right corner of the Plant
to view the operation options..
2.Click the "Edit" button to enter the [Edit Plant] page to complete the modification of Plant
information.
3.Enter the content that the Plant needs to modify, and click the "Save" button after completion.
4.After the input information is correct, the page prompts "edited successfully".

— 20 —
Figure 7-7 Editing plant

1. Editing plant function requires management permission for the edited plant.

7.4 Share plant

You can share a plant by "Share Plant" function when you need to share it with others.
Operations are as follows.
1. Click the bottom button "Plantt", and click the ".."button in the upper right corner of the Plant
to view the operation options.
2. Select "Share" to enter the [share Station] page.
3. Shared power plants can be shared with other accounts using two permissions.
4. Enter the AlpSolarr account of the shared person to complete the sharing.

— 21 —
Figure 7-8 Sharing plant
1.The account of the shared person is the registered account of AlpSolarr (email or
mobile phone number in mainland China).

7.5 Transfer of plant

When you need to transfer a plant to others, you can transfer the plant to others through
the transfer plant function. The operation method is performed as follows.
1.Click on the "..." operation to view the options.
2.Select the "Transfer" option in the red box and complete the deletion as prompted.

Figure 7-9 Transfer of plant

— 22 —
3. Enter the transferred account and click done.

Figure 7-10 Confirmation of transfer

— 23 —
8 Inverter management

8.1 Enter inverter list

Click "equipment" at the bottom to enter the inverter list page, click an inverter to view the
detailed information and working data of the inverter.

Figure 8-1 Inverter List

8.2 Parameter settings

Click "..." in the upper right corner of the device to set the alias, parameter parameters,
delete (once deleted, cannot be restored) and other operation functions.
step:
1. Click the "..." button to view the operation options of the inverter.
2. Select "Parameter Settings".
3 .Go to the "Grid Settings" page.
4 .Enter the parameter information and click the "Save" button in the upper right corner.
4. After the device command is issued successfully, the content shown in the figure above will be
prompted.

— 24 —
Figure 8-2 Parameter setting
1.The remote operation of the inverter requires the corresponding operation
authority to operate.
2. Functions related to parameter configuration of the inverter can only be operated
with the support of the inverter, and the current state of the inverter to be operated
is "online" state.

— 25 —
8.3 Delete inverter

Select the inverter to be deleted in the inverter list, click the "..." button in the upper right
corner of the inverter, and follow the prompts to complete the deletion.

Figure 8-3 Delete inverter

8.4 Inverter details

Inverters are divided into "energy storage", "grid connection" and "micro-inverse". First,
view the "energy storage" type of equipment in the inverter list page.
1. Click the inverter "type" button to view the "energy storage" device.
2. Click the inverter in the red box to enter the details page.
3. After entering the inverter more page, you can see the inverter "output", "Input", "current",
"voltage", "frequency", "temperature" related information.

— 26 —
Figure 8-4 Inverter Type

Figure 8-5 Inverter Details

— 27 —
9 Gateway management
On the collector management related pages, users can view all collectors under their
account, and manage and unbind them.

9.1 Collector Details

step:
1 .Click on a collector to go to the details page.
2. view collector details.

Figure 9-1 Collector Details

— 28 —
9.2 Unbind collector

Select the collector to be unbound in the collector list, click the "..." button in the upper
right corner of the collector, and follow the prompts to complete the unbinding.

Figure 9-2 Unbinding the collector


1.If the collector needs to be removed from a Plant, it is necessary to remove the
binding relationship between the collector and the local Plant. The specific operation
is as follows: Select the collector to be unbound in the [collector List] page, and click
the operation button "..." Select "Unbind" in the pop-up menu, and complete the
unbind operation according to the prompts.

— 29 —
10 Event information
Click "Event" at the bottom to enter the event list page, you can view the device event
information, and you can select the event type to view the details according to your
customization.
Step:
1. Click on an event at random to enter the event details page.
2. view event details.

Figure 10-1 Event Information

— 30 —
11 Personalization

11.1 Language Switch

Click the "Me" button at the bottom, enter the personal center, and choose to switch
languages.

Figure 11-1 Language switch

— 31 —
11.2 Preferences

1. Click the "Me" button at the bottom to enter the Personal Center and select Preferences.
2. select a temperature unit.

Figure 11-2 Preferences

— 32 —
12 Parameter Description
Item Field name describe
BMS charging voltage V-Charge-BMS
BMS Charging limit current I-Charge-Limit-BMS
BMS discharge voltage V-Discharge-BMS
BMS Discharge limits current I-Discharge-Limit-BMS
BMS temperature T-BMS
BMS Voltage V-BMS
BMS current I-BMS
volume Capacity
Battery Total charging amount Total Charging
Total discharge Total Discharging
Daily charging volume Today Charging
Daily discharge Today Discharging
Battery SOC SOC
power of batter P-bat
Battery temperature T-bat
battery voltage V-bat
battery current I-bat
Total electricity consumption Cumulative Consumption
Daily electricity consumption Daily Consumption
Load Total load power P-load
load power L1 P-load-L1
load power L2 P-load-L2
alternating-current 1 I-grid-L1
alternating-current 2 I-grid-L2
alternating-current3 I-grid-L3
Built-in power1 P-Internal-CT-L1
Built-in power2 P-Internal-CT-L2
Total purchase of electricity Total Import
Total electricity sold Total Export
Grid
Buy electricity every day Import
Electricity sold every day Export
Total power of the grid P-grid
Grid voltage L1 V-grid-L1
Grid voltage L2 V-grid-L2
Grid voltage L3 V-grid-L3
Power grid frequency F-grid
AC_TEMP AC_TEMP
Inv
DC_TEMP DC_TEMP

— 33 —
I-ac-1 I-ac-1
I-ac-2 I-ac-2
PV power P-pv
V-ac-1 V-ac-1
V-ac-2 V-ac-2
Generator power P-Gen
Micro inverse power P-Micro-Inv
Total output power P-Inv
Inverter temperature T-Inv
frequency F-ac
gross generation Total Production
Daily electricity generation Daily Production
Group string voltage 1 V-pv-1
Series
Group string voltage 2 V-pv-2
Group series current 1 I-pv-1
Group series current 2 I-pv-2
External power 1 P-External-CT-L1
Meter
External power 2 P-External-CT-L2

— 34 —

You might also like