3∅12-C1

A
124∅16-S2
3∅12-S4
8∅12-S4
2∅12-S4
58∅16-C@300
4∅12-S4

800
1150
BAR SCHEDULE FOR 16m. SPAN GIRDER BRIDGE

TOP SLAB REINFORCEMENT

TOTAL

2200
LENGTH LENGTH SHAPE
BAR SIZE NUMBER
(m.) (m.)

B
C 16 116 2.30 266.80

B
1100
C1 12 14 16.80 235.20

CL
8905
8900

D1 16 9 6.88 61.92
1100

BOTTOM SLAB REINFORCEMENT

D2 12 6 6.88 41.28

D3 12 54 2.04 110.16
2200

G1 32 24 12 288
2∅16-S1
G2 24 7.04 168.96
1150

32
800

G3 32 8 6.25 50.00
A
4∅16-S3
58∅12-C @300
8∅16-S3

58∅16-S1
2∅16-S3
PLAN SHOWING SLAB REINFORCEMENT 58∅16-S1
G4 32 8 12 96.00
3∅12-C1
G5 32 8 9.57 76.56

G6 32 8 11.23 89.84

G7 32 8 4.75 38.00
8900

7300 (Clear Roadway)

G8 16 16 16.80 268.80
800 3650 3650 800 4 ∅ 16-G8

G9 12 432 2.86 1235.52

8∅12-S3@220(top) 2∅12-S4 84

180
4∅12-S3@220(top)

3∅12-S4 4∅16-S3@200
∅ 12-G9
S1 16 120 7.40 888.00

180
8∅16-S3@200 58∅16-C@ 300 2 ∅ 32-G7
2 ∅ 32-G6

95
2 ∅ 32-G5

(Bottom) (Bottom) Permissible Const.

95
CL RDWY. 2 ∅ 32-G3+G4

6 ∅ 32-G1+G2

95
S1 S2 keys .30 long @0.60
300

80
50 CL.

S2 16 124 8.80 1091.20

220

2.5%
250

2.5%
80 80 80 80 80

400

GIRDER REINFORCEMENT DETAIL NEAR CENTER OF SPAN

Scale 1: 10
250

100
4 ∅ 16-G7
S3 16 28 17.20 481.60
7∅12-C1
1650

180
D1 100x100 fillets (Typ.) ∅ 12-G8
1320

2∅16-S3

180
D
1100

6 ∅ 32-G1+G2

S4 12 34 17.20 584.80

80
80
160 160
80 80 80 80 80

400
6∅12-D2 @0.30
Level
300

GIRDER REINFORCEMENT DETAIL NEAR END OF SPAN

Scale 1:10

Level
950 400 1800 400 2000 2200 1150

NEAR CENTER OF SPAN NEAR END OF SPAN

TYPICAL CROSS SECTION
Scale 1: 25
NOTE: 120 120
1190-G8 CONCRETE
128
-STRUCTURE IS SYMMETRICAL ABOUT CENTER LINE OF ROADWAY.
Class C-35/20 concrete ----------------------------------------= 76.11 m3
800-D3
128 0
R=16
0 R=16
-CURBS ARE TO END AT FACE OF BACKWALL WITH 0.02 PREMOLDED JOINT FILLER
-CROSS SLOPE SHOWN APPLIES ONLY WHERE DECK HAS NO SUPERELEVATION. BAR-G8,& D3
in all concrete structural components - overhang deck,
580 17780 580
18940 slab, girders, cross girders
650
BAR-G1+G2
REINFORCEMENT STEEL (including laps)

96
96
260
380

7700

660
Mild Steel Bars -------------------------------------------------= 6.79 ton
350
BAR - S2
BAR-C Note-
Bar may be spliced Beyond quarter points with min lap of 20 diam.
High Yield Stress Steel Bars---------------------------------= 5.09 ton
splices in adjacent bars to be staggered 1.50 min.

CL of Bearing (fix.) GENERAL NOTES:-

CLof Bearing (exp.) CL of Span
1. Dimensions are in meters unless otherwise specified.
17300 (END TO END OF DECK SLAB)
350 8300 8300 350 2. Dimensions of bar bendings are out to out of bars given in meters.
20 124∅16-S2@140 (Top) 3. Bar sizes denote diameter of bars and given in millimeters.
20mm. premolded exp.
160 58∅16-S1@140 (Bott.) 160 160 58∅ 16-S1@140 (Bott.) 160 4. Spacings of bars are center to center of bars given in millimeters.
joint filler S4 S3
5. Concrete quality as per ERA's Standard Technical Specifications 2002.
220

Class C-35/20 concrete for construction of concrete structural components.

1 Layer of
Bitum. paper 4∅12- D2 2∅16-S1
(Minimum characteristic cube compressive strength at 28days is 35Mpa.)
G8 D3
3∅16-D1 D1
1320

0.05 3∅16- D1
6. Reinforcement steel: Deformed bars, as per ERA's Tech. Specn. 2002.
G1 +G2 G7
G3+G4 G5 G6
90 90
-Mild Steel Bars:- Grade 300 steel, for bars less than diameter 20mm.
110 120 150 200 250 Minimum yield strength 300MPa and minimu tensile strength 500MPa.
250
10sp. ∅12-G8@100 14sp. ∅12-G8@120 11sp. ∅ 12-G8@150 6sp. ∅12-G8@200 13sp. ∅12-G8@250 54 sp ∅12-G5 (same as opp. end ) -High Yield Steel Bas:- Grade 420 steel for diameter 20mm and bigger.
16000M.(FACE TO FACE OF ABUTMENT) Minimum yield strength is 420MPa and minimum tensile strength 620MPa.
300 200 300
7. Splicing of bars shall be done for bars greater than 12.00m long with the
300 200 300
following lap lengths:
LONGITUDINAL SECTION NOTE:- For Ø12 bars ----------------------- 0.30m
STRUCTURE IS SYMMETRICAL ABOUT CENTER LINE OF ROADWAY.
Scale 1: 25 For Ø16 bars ----------------------- 0.40m
For Ø32 bars ----------------------- 1.80m
8. Provide 40mm chamfer at all corners.
9. Provide 30mm diameter drip notch .
10. Provide 40mm upward camber at the center of all girders.