NT-2000

Taiwan TAKISAWA Technology Co., Ltd.

Pingchen /
NT-2500
NT-2000 / NT-2000M
Series
No. 505, Sec 3, Yenping Rd., Pingchen Dist.,
Taoyuan City, 32453, Taiwan NT-2500 / NT-2500M Classic High-Performance Turning Center
TEL: +886-3-4643166 FAX: +886-3-4642614

Yangmei /
No. 89, Sec. 1, Meishi Rd., Yangmei Dist.,
Taoyuan City, 32659, Taiwan
TEL.: +886-3-4813119 FAX: +886-3-4813185
E-mail: [email protected]

TAKISAWA Mechatronics (Zhejiang) Ltd.

Zhejiang /
188 Baoqun East Road, Jiashan County,
Jiaxing City, Zhejiang Province, China
TEL: +86-573-89103672 FAX: +86-573-89103671

TAKISAWA Tech Corp

U.S.A /
15271 FaiŠƥeld Ranch Rd., Unit 130,
Chino Hills, CA 91709, U.S.A
TEL: +1-866-606-6143 / +1-909-308-0903
E-mail: [email protected]

TAKISAWA Tech Asia Co.,Ltd.

Thailand /
18/31 M.7, Bangchalong, Bangphi,
Samutprakan, 10540. Thailand
TEL: +66-20465900 FAX: +66-20465901
E-mail: [email protected]

www.takisawa.com.tw

žĕúÒŝŝúÒŠÒĹîúŧȢŧŝúîĚƥîÒŰĚŃĹŧȢĚĮĮŸŧŰŠÒŰĚŃĹŧȢŧŃčŰƑÒŠúȢÒĹôôúŧîŠĚŝŰĚŃĹŧĚĹŰĕĚŧ
íŠŃîĕŸŠúƐÒŠƗĚĹôĚččúŠúĹŰķÒŠīúŰŧÒĹôÒŠúŧŸíĨúîŰŰŃîĕÒĹĎúƑĚŰĕŃŸŰĹŃŰĚîúȡ
ŠĮúÒŧúķÒīúÒĹĚĹşŸĚŠƗŰŃŃŸŠŧÒĮúŧŠúŝŠúŧúĹŰÒŰĚƐúŧčŃŠôúŰÒĚĮŧȡ

DZǯDZdzȡǰǯ
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

NT-2000
NT-2000/NT-2500 series is the new generation high-performance turning
center of TAKISAWA TAIWAN, succeeded the consistent great rigidity,
excellent stability. The sleek appearance is a TAKISAWA family characteristic.

NT-2500
For providing user more functions, and meeting various processing demands,
the upgraded modular design came up.
Working Range

series Max. Turning Dia.

NT-2000

320
NT-2000M

280
NT-2500

360[T10]/320[T12]
NT-2500M

280 mm

Max. Turning Length 482 447.8 447 412.8 mm

Bar Capacity 52(65) 75 mm

( ) Optional

With the extended linear guideways

and spans for X, Z-axis, the machine
rigidity and machining stability has
improved, comparing with its class.

Specification Options
NT-2000 NT-2000M NT-2500 NT-2500M
Pulley Driven Spindle Ø63
Travel and Feedrate
Pulley Driven Spindle Ø76
Pulley Driven Spindle Ø86
NT-2000 NT-2000M NT-2500 NT-2500M
Built-in Motor Spindle Ø63
X-axis Travel 180 200[T10]/180[T12] 180 mm
C-axis function
Z-axis Travel 530 mm
T10 Turning Turret
X-axis Rapid Traverse Rate 24(15) m/min
T12 Turning Turret
Z-axis Rapid Traverse Rate 24(18) m/min
T12 Milling Turret
( ) Optional
Standard Tailstock
PIN Carry Tailstock
̞6WDQGDUG̝2SWLRQDO1RQH
01 02
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Spindle Specifications Spindle Output Diagram

Spindle Spindle Speed

NT-2000 NT-2000M

3500(4000)
NT-2500

3500
NT-2500M

rpm
( kW ) 36
NT-2500
Motor: ǂil 15/8000-B
Spindle through hole: Ø86 mm
NT-2500M Spindle max. speed: 3500 rpm
319.1 N·m
30 kW [S3/S6 15% ]
330 (N·m)

The high rigidity headstock is designed and 265.9 N·m

Chuck Size 8 10 inch 247.5
manufactured in-house by TAKISAWA. Pursues
27 25 kW [S3/S6 25% ]

an ultimate rotational accuracy, which greatly Spindle Nose A2-6 A2-8

196.8 N·m 21.5 kW

Power
18.5 kW [S2 30min, S3/S6 60% ]

Torque
improving the surface accuracy of workpiece. 18 159.5 N·m
15 kW [cont]
165

Through Hole Dia. 63(76) 86 mm

½ÒŠĚŃŸŧ ķÒîĕĚĹĚĹĎ ŰÒŧīŧ îÒĹ íú ŧÒŰĚŧƥúô ƑĚŰĕ 9 82.5
Bearing Dia. 100(110) 120 mm
appropriate spindle through hole and main
motor type since diverse headstock options. Motor Output 7.5/11(11/15)(15/18.5) 15/18.5 kW 0 0
0 898 1796 2798 3500
Spindle Speed ( rpm )
( ) Optional

Motor: ǃil 8/12000-B Motor: ǃil 12/10000-B

NT-2000 Spindle through hole: Ø63/Ø76 mm NT-2000 Spindle through hole: Ø63 mm
NT-2000M Spindle max. speed: 4000 rpm NT-2000M Spindle max. speed: 3500 rpm
( kW ) 16 160 (N·m) ( kW ) 20 180 (N·m)

Torque (N·m)
140 .1N·m
[15min] 159.2 N·m [15min]

12 11 kW 120 15 kW [15min, S3 25% ]

15 116.7 N·m 135
[S2 15min, S3 25% ]
95.5 N·m [60min]
[60min]

Torque

Torque
11 kW [cont]

Power

Power
7.5 kW 87.6 N·m 11.4 kW
71.6 N·m
8 [cont] [cont] 80 10 [cont] 90
6.8 kW 8.09 kW

4 4.7 kW 40 45
5 [60min, S3 40%]
[S2 60min,
S3 40%]

0 0 0 0
0 750 1000 2250 4000 0 900 1200 2100 3500
Spindle Speed ( rpm ) ( rpm )
Spindle Speed

Motor: ǃil 12/10000-B Motor: ǂil 12/8000-B

NT-2000 Spindle through hole: Ø63/Ø76 mm NT-2000 Spindle through hole: Ø63/Ø76 mm
NT-2000M Spindle max. speed: 4000 rpm NT-2000M Spindle max. speed: 4000 rpm
( kW ) 20 200 (N·m) ( kW ) 20 229.2 N·m [25%] 240 (N·m)
191 N·m
[15min] 191 N·m
[30min] [S3 25%]
140.1N·m 15 kW [15min, S3 25% ] 15kW [30min, S3 60% ]
15 [60min] 150 15 180
140.1 N·m
11 kW [cont]
105.1 N·m [cont] 11kW [cont]

Torque

Torque
Power

Power
[cont]
11 kW
10 100 10 90

8 kW
7.5 kW
5 5.9 kW 50 5 45
[60min, S3 40%]

0 0 0 0
0 750 1000 1750 4000 0 625 750 3000 4000
Spindle Speed ( rpm ) Spindle Speed ( rpm )

Motor: ǂil I12/8000-B Motor: Bil 160M/13000

NT-2000 Spindle through hole: Ø63 mm NT-2000 Spindle through hole: Ø63 mm
NT-2000M Spindle max. speed: 3500 rpm NT-2000M Spindle max. speed: 4000 rpm
( kW ) 20 191 N·m [25%] 200 (N·m) ( kW ) 25 350 (N·m)
326 N·m [S3 15%]
159.2 N·m 175 N·m [cont]
[30min] [S3 25%]
15kW [30min, S3 60% ] [S3 25%] 280
150 18.5 kW [S3 40% ]
15 18.5
208 N·m [S3 40%]
116.7 N·m 181 N·m [S3 25%]
[cont] 210

Torque
11kW [cont]

Torque
Power

Power
10 100
11 kW [cont]
11
140

7.5
5 50
5.5 70
124 N·m [cont]

0 0 0 300 850 3000 0

03 0 750 900 3500 0 220 975 3250 4000 04
Spindle Speed ( rpm ) Spindle Speed ( rpm )
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Turret 01
The high-accuracy turret is manufactured in-house by
TAKISAWA, which equipped with a large outer diameter
Turret Structure
curvic coupling, enhancing machining rigidity greatly.
01 High rigidity and great accuracy are characteristics of
the curvic coupling with diameter 210mm.
For multi-tasking demands such as shaped milling,
ôŠĚĮĮĚĹĎȢÒĹôŰĕŠúÒôĚĹĎȢŰĕúķÒîĕĚĹĚĹĎúčƥîĚúĹîƗîÒĹíú 02 Support the high-pressure cutting demand for 70bar.

improved with a milling turret.

02

Turret Specifications Milling Spindle Output Diagram

8 80

Power (kW)

Torque (N·m)
T10 T12 T12 65.4 N·m
[15min]
Turning Turret Turning Turret Milling Turret 5.5 kW
6 [15min, S3 25% ] 60
OD Tool Shank Dia. 25 25 25 mm
44 N·m
ID Tool Shank Dia. 40 40 40 mm [60min]
4.1 kW
4 33 N·m 3.7 kW [cont] 40
Milling Shank Dia. - - 20 mm [cont]
2.9 kW
Milling Spindle Speed - - 4000 rpm
Milling Motor Output - - 3.7/5.5 kW 2 20

[60min, S3 40%]
803
0 0
0 1071 2410 4000

Spindle Speed (rpm)

01 02 03
01 T10 Turning Turret

02 T12 Turning Turret

03 T12 Milling Turret

05 06
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Tailstock Specifications

Tailstock
Tailstock Travel 435 mm
Tapered Bore Type MT.4
Movement Type Manual Pin Carry
žĕúôúŧĚĎĹŧȢŧŝúîĚƥîÒŰĚŃĹŧȢôĚķúĹŧĚŃĹŧȢÒĹôŧŰŠŸîŰŸŠúŧĚĹŰĕĚŧ
With stable tailstock, it provides the best brochure are subject to change without notice.
support for shaft shapes workpiece.

There is optional automatic PIN carry type

tailstock, for user-friendly operation.

Select a suitable type of tailstock movement based

on machining demands.

01
01 ĕĚŝŃĹƐúƗŃŠŃĹƥĎŸŠÒŰĚŃĹ
For the chip conveyor, rightward disposal or
rearward disposal are available.

02 Chip Conveyor Type

There are hinge type or scraper type chip conveyor available,
based on material and chips size.

02

Hinge Type Scraper Type

Chip Conveyor Chip Conveyor

435mm
Curly Metalic Chip Power Metalic Chip
Chip Type Steel / Aluminum Foundry / Aluminum / Brass
Non-metalic Chip

Hinge Type
07 Scraper Type 08
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Travel Range Interference

NT-2000 T10 TURNING TURRET NT-2500 T10 TURNING TURRET NT-2000 T10 TURNING TURRET NT-2500 T10 TURNING TURRET

380 195 20
380 215 20

35
385

35
120 X axis st. 180 405
120 X axis st. 200
35 35

36 .
Ø dia
32 .

Ø2 ia.
Ø dia
Ø2 ia.

0
30
0
30

g
d
Ø5

ni n
Ø5

ing
ni n
ing
40

ur
40

turn
ur
turn

.t
.t

ax
ax

M
.

Std
Std

M
37.7 Z axis ref. point 630 100

Ø2

Ø2
57.7 Z axis ref. point 610 100

50

50
100 Z axis st. 530 80 Z axis st. 530
141 Max. turning length 482 7 156 Max. turning length 447 7

25

25
T10 T10

25
25
35
35

X axis st. 200

X axis st. 180

7 7
ref. point

20

ref. point

20
55
X axis

55 Spindle

X axis
Spindle
195

215
Center Center

35
35
20

35
20

35
MT NO.4 MT NO.4
20

20
STRONG
N-208A6 STRONG

Ø40

Ø40
30

Ø40
Ø40
N-210A8 30 Ø2
A2-6 42 Tailstock spindle st.100
7 Tailstock spindle st.100 Ø2

0
0

Ø23
283 Tailstock st. 435 112.5 112.5

Ø23
A2-8 263 Tailstock st. 435

NT-2000 T12 TURNING TURRET NT-2500 T12 TURNING TURRET NT-2000 T12 / NT-2500 T12 TURNING TURRET

420 195 20
405
X axis st. 180
35

35
35
120 120

32 .
Ø dia
Ø2 ia.
Ø5

0
10
gd
80

g
nin
rnin

ur
.t
. tu

ax
M
Std
37.7 Z axis ref. point 630 100 57.7 Z axis ref. point 610 100

25
100 Z axis st. 530 80 Z axis st. 530

25
141 Max. turning length 482 7 156 Max. turning length 447 7
T12 T12 7
55 Spindle
35

35
180
X axis st. 180

Center
ref. point

ref. point

X axis st.
X axis

X axis
195

195

20
40

40

35
Ø2

35
10

Ø40
MT NO.4 MT NO.4

Ø40
20

STRONG
N-208A6 STRONG

Ø2
N-210A8

10
A2-6 42 Tailstock spindle st. 100 7 Tailstock spindle st.100
283 Tailstock st. 435 112.5 A2-8 263 Tailstock st. 435 112.5

NT-2000M T12 / NT-2500M T12 MILLING TURRET

NT-2000M T12 MILLING TURRET NT-2500M T12 MILLING TURRET

350 240 40
415
X axis st. 180
90

.
90

g dia
5
Ø

Ø23
110 63
10 0

28 .
110 10

Ø dia
turnin

0
0

ng
Ø2

ni
ur
Std.

.t
ax
M
13
6
37.7 Z axis ref. point 620.8 100 57.7 Z axis ref. point 600.8 100
90.8 Z axis st. 530 70.8 Z axis st. 530

25
141 Max. turning length 447.8 156 Max. turning length 412.8
50 T12 50 T12
X axis st. 180

100

X axis st. 180

ref. point

Ø4 90
100
ref. point
X axis

0 100
X axis
240

240

Spindle
Center
7
30

10
30
40

90

30
40

90

STRONG Ø23
N-208A6 MT NO.4 STRONG Ø4 0
MT NO.4 40 0
54 Tailstock spindle st. 100 N-210A8 Ø2
A2-6
09 295 Tailstock st. 435 112.5 19 Tailstock spindle st.100 10
A2-8 275 Tailstock st. 435 112.5
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Tooling System Standard and Optional Accessories

Accessories NT-2000 NT-2000M NT-2500 NT-2500M
25
Pulley Driven Spindle ̞ ̞ ̞ ̞
NT-2000
Turning Tool Sloping Gasket NT-2500 Built-in Motor Spindle ̝ ̝ — —
T10 Hydraulic Servo Turning Turret ̞ — ̞ —
Facing Holder T12 Hydraulic Servo Turning Turret ̝ — ̝ —
Tool Gasket
T12 Hydraulic Servo MillingTurret — ̞ — ̞
Boring Bar Tool Holder (4 Sets) ̞ ̞ ̞ ̞
U-drill Tool holder (1 Set) ̞ ̞ ̞ ̞
Ø40 Boring Bar Bush
Facing Tool Holder (1 Set) ̞ ̞ ̞ ̞
Ø6/Ø8/Ø10/Ø12/
Ø16/Ø20/Ø25/Ø32 (mm) T10 Turning Turret Turning Tool Holder (1 Set) — ̞ — ̞
Boring Bar
Boring Bar Bush (Ø6) ̝ ̝ ̝ ̝

Boring Bar Tool Holder Boring Bar Bush (Ø8, Ø10, Ø12, Ø16, Ø20, Ø25) ̞ ̞ ̞ ̞

Drill Socket Boring Bar Bush (Ø32) ̝ ̝ ̝ ̝

MT.4/ 3/ 2/ 1 U-drill Socket (Ø16, Ø20, Ø25) ̞ ̞ ̞ ̞
Drill U-drill Socket (Ø32) ̝ ̝ ̝ ̝
Drill Socket (MT.1, MT.2, MT.3) ̞ ̞ ̞ ̞
Drill Socket (MT.4) ̝ ̝ ̝ ̝
Ø40 U-Drill Socket
X-axis Milling Holder (1 Set) — ̞ — ̞
Ø16/Ø20/Ø25/Ø32 (mm)
U-drill Tool Holder T12 Turning Turret
Z-axis Milling Holder (1 Set) — ̞ — ̞
U-drill Basic Iron Block ̞ ̞ ̞ ̞
Tool Gasket ̞ ̞ ̞ ̞
Working Light ̞ ̞ ̞ ̞
Tool Box ̞ ̞ ̞ ̞
25 Operation Manual ̞ ̞ ̞ ̞
Hydraulic Chuck ̞ ̞ ̞ ̞
Facing Holder
Turning Tool Sloping Gasket Foot Switch ̞ ̞ ̞ ̞
NT-2000M Hydraulic Tailstock with Live Center ̝ ̝ ̝ ̝
NT-2500M Manual PIN Tailstock Base ̝ ̝ ̝ ̝
Tool Gasket
Automatic PIN Tailstock Base ̝ ̝ ̝ ̝
Turning Holder
Sling (2PCS) ̝ ̝ ̝ ̝
Drill Socket
Right Disposal Chip Conveyor ̝ ̝ ̝ ̝
MT.4/ 3/ 2/ 1
Rear Disposal Chip Conveyor ̝ ̝ ̝ ̝
Drill
Chip Cart ̝ ̝ ̝ ̝
Ø40 Boring Bar Bush Boring Bar Tool Holder Coolant Pump (400W) ̞ ̞ ̞ ̞
Ø6/Ø8/Ø10/Ø12/
Ø16/Ø20/Ø25/Ø32 (mm) T12 Milling Turret Coolant Pump (715W, 750W, 900W, 1400W) ̝ ̝ ̝ ̝
Boring Bar Tool Setter ̝ ̝ ̝ ̝
Parts Catcher ̝ ̝ ̝ ̝
Ø40 U-drill Socket
Parts Conveyor ̝ ̝ ̝ ̝
Ø16/Ø20/Ø25/Ø32 (mm) U-drill Holder
U-drill Automatic Barfeeder & Interface ̝ ̝ ̝ ̝
X-axis Pneumatic Automatic Door ̝ ̝ ̝ ̝
Milling Holder
Safety Door Switch ̝ ̝ ̝ ̝
ER32 Air Blow ̝ ̝ ̝ ̝
Automatic Power-off ̝ ̝ ̝ ̝
Z-axis
Collet Milling Holder Parts Counter ̝ ̝ ̝ ̝
Collect Chuck ̝ ̝ ̝ ̝
Oil Mist Collector ̝ ̝ ̝ ̝
11 12
̞6WDQGDUG̝2SWLRQDOŃ1RQH žĕúôúŧĚĎĹŧȢŧŝúîĚƥîÒŰĚŃĹŧȢôĚķúĹŧĚŃĹŧȢÒĹôŧŰŠŸîŰŸŠúŧĚĹŰĕĚŧíŠŃîĕŸŠúÒŠúŧŸíĨúîŰŰŃîĕÒĹĎúƑĚŰĕŃŸŰĹŃŰĚîúȡ
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Machine Dimensions Machine Specifications

NT-2000/NT-2500 Series Item NT-2000 NT-2000M NT-2500 NT-2500M

Swing Over Saddle mm 320 320

2195 A Swing Over Bed mm 400 400

2053 230[T10]/210[T12] 235

Std. Turning Diameter mm 230[T10]/210[T12] 235
Capacity
Max. Turning Diameter mm 320 280 360[T10]/320[T12] 280

Max. Turning Length mm 482 447.8 447 412.8

Bar Capacity mm 52(65) 75

X-axis Travel mm 180 200[T10]/180[T12] 180

Travel
Z-axis Travel mm 530 530

Spindle Speed rpm 3500(4000) 3500

Chuck Size inch 8" 10"

Spindle Spindle Nose A2-6 A2-8

Through Hole Diameter mm 63(76) 86

B
Bearing Diameter mm 100(110) 120

Type T10(T12) T12 T10(T12) T12

Turning Tool Shank mm 25 25

Turret Boring Bar Shank Diameter mm 40 40

1505 C Milling Speed rpm - 4000 - 4000

335
Milling Shank Diameter mm - Ø1 - Ø20 - Ø1 - Ø20
136.8
Tailstock Spindle Travel mm 435 435

Tailstock Spindle Diameter mm 75 75

Tailstock
Taper Hole of Tailstock Spindle MT.4 MT.4

Tailstock Spindle Travel mm 100 100

X-axis Rapid Traverse m/min 24(15) 24(15)

Feedrate
Z-axis Rapid Traverse m/min 24(18) 24(18)

Spindle Drive Motor kW 7.5/11(11/15)(15/18.5) 15/18.5

1780

Milling Motor kW - 3.7 / 5.5 - 3.7 / 5.5

Motor Turret Index Motor kW 1.2 1.2

1031

X-axis Drive Motor kW 1.2 1.2

D

Z-axis Drive Motor kW 2.5 2.5

Height mm 1780 1780

Width mm 2195 2195

Machine
Size Depth mm 1505 1505

Dimensions of conveyor Weight Kg 4300 4400

A B C D
( ) Optional žĕúôúŧĚĎĹŧȢŧŝúîĚƥîÒŰĚŃĹŧȢôĚķúĹŧĚŃĹŧȢÒĹôŧŰŠŸîŰŸŠúŧĚĹŰĕĚŧíŠŃîĕŸŠúÒŠúŧŸíĨúîŰŰŃîĕÒĹĎúƑĚŰĕŃŸŰĹŃŰĚîúȡ
Standard 831 901 1100 901
CE 832 911 1090 901
Italy 1062 1001 - -
Switzerland 1062 1151 - -

13 14
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification Example NC Unit Specifications

Customized Specification Examples High Speed Gantry Loader System

Lathe
Layout Variations Gantry Loader
Workpiece Feeder

01 A B C

Peripheral Equipment Gantry Loader Specifications

Feedrate
X-axis 180 m / min
Z-axis 150 m / min

Working Range
O.D. 160 mm
02 03
Length 100 mm

01 Customized Chuck
Measurement Station Cleaning Station Weight 3 (x2) kg

02 Dual Pneumatic Chuck

Workpiece Feeder Specifications
03 Automatic Tool Setter
Pallet Qty 16 pcs
04 Collect Chuck Loading Weight 40 kg
+ Parts Catcher
Max. Height 450 mm
04 05 05 Slide-in Gantry Loader Visual Positioning Station Turning Station Workpiece Feeder Width 610 mm

Optional High-accuracy Accessories Turn-Key Solution

If there are any special requirements for 01 02
machining accuracy with high-accuracy
optional equipment to be installed.
Please contact us for more details.

01 Linear Scale 03 04 05
02 Automatic & Manual Tool Setter
03 Coolant Chiller
04 High Pressure Coolant System
05 Hydraulic Oil Chiller

15 16
 Introduction Spindle Turret Tailstock Interference & Travel Tooling System Machine Specifications Special Specification ExampleNC NC Unit Specifications

NC Unit Specifications ̞6WDQGDUG̝2SWLRQDOɛ6SHFLDO̖3DUDPHWHU6HWWLQJLVUHTXLUHGŃ1RQH

6SHFLƉFDWLRQVz&RQWHQWV

Data I/O
NT-2000 NT-2500 NT-2000M NT-2500M 6SHFLƉFDWLRQVz&RQWHQWV

&ORFN)XQFWLRQ
NT-2000

̞
NT-2500

̞
NT-2000M NT-2500M

̞ ̞
56&,QWHUIDFHIRUFK ̞ ̞ ̞ ̞ &XUUHQW3RVLWLRQ'LVSOD\ ̞ ̞ ̞ ̞
6SHFLƉFDWLRQVz&RQWHQWV NT-2000 NT-2500 NT-2000M NT-2500M 6SHFLƉFDWLRQVz&RQWHQWV NT-2000 NT-2500 NT-2000M NT-2500M )DVW'DWD6HUYHU ɛ ɛ ɛ ɛ 3URJUDP&RPPHQW'LVSOD\
̞ ̞ ̞ ̞
([WHUQDO0HVVDJH ̞ ̞ ̞ ̞ &KDUDFWHUV
Controller 5HIHUHQFH3RLQW5HWXUQ&KHFN * ̞ ̞ ̞ ̞
QG5HIHUHQFH3RLQW5HWXUQ * ([WHUQDO:RUNSLHFH1XPEHU6HDUFK ̝ ̝ ̝ ̝ 3DUDPHWHU6HWWLQJDQG'LVSOD\ ̞ ̞ ̞ ̞
L7)3OXV ̞7<3( ̞7<3( ̞7<3( ̞7<3( ̞ ̞ ̞ ̞

NC Unit UGWK5HIHUHQFH3RLQW5HWXUQ 0HPRU\&DUG,2 ̞ ̞ ̞ ̞ $ODUP'LVSOD\

̞ ̞ ̞ ̞ ̞ ̞ ̞ ̞
&RORU/&' ̞ ̞ ̞ ̞ Feed Function 7RRO)XQFWLRQV7RRO2ƈVHW)XQFWLRQV $ODUP/RJ'LVSOD\ ̞ ̞ ̞ ̞
7)XQFWLRQ 7'LJLWV ̞ ̞ ̞ ̞
Safety Device 5DSLG7UDYHUVH2YHUULGH 2SHUDWRU0HVVDJH/RJ'LVSOD\ ̞ ̞ ̞ ̞
̞ ̞ ̞ ̞ ̞ ̞
) 7RRO2ƈVHWV3LHFHV ̞ ̞
)URQW'RRU,QWHUORFN ̝ ̝ ̝ ̝ 2SHUDWLRQ0HVVDJH/RJ'LVSOD\ ̞ ̞ ̞ ̞
)URQW'RRU/RFNLQJ0HFKDQLVP ̝ ̝ ̝ ̝ )HHG3HU0LQXWH ̞ ̞ ̞ ̞ 5XQ+RXUVDQG3DUWV&RXQW'LVSOD\ ̞ ̞ ̞ ̞
)HHG3HU5HYROXWLRQ ̞ ̞ ̞ ̞ 7RRO*HRPHWU\6L]H'DWD
6DIHW\5HOD\ ̝ ̝ ̝ ̝ ̞ ̞ ̞ ̞ $FWXDO6SHHG'LVSOD\ ̞ ̞ ̞ ̞
&RQVWDQW7DQJHQWLDO6SHHG&RQWURO ̞ ̞ ̞ ̞ 3LHFHV
&RQWURO3DQHO%UHDNHUZLWK7ULSSHU ̝ ̝ ̝ ̝ $FWXDO6SLQGOH6SHHGDQG7&RGH'LVSOD\ ̞ ̞ ̞ ̞
&XWWLQJ)HHGUDWH&ODPS ̞ ̞ ̞ ̞ 7RRO3RVLWLRQ2ƈVHW ̞ ̞ ̞ ̞
Controlled Axes )ORSS\&DVVHWWH'LUHFWRU\'LVSOD\ ̞ ̞ ̞ ̞
$XWRPDWLF$FFHOHUDWLRQ'HFHOHUDWLRQ ̞ ̞ ̞ ̞ 7RRO'LDPHWHU1RVH5&RPSHQVDWLRQ ̞ ̞ ̞ ̞
/HDVW,QSXW,QFUHPHQW ̞ ̞ ̞ ̞ 2SWLRQDOSDWKQDPHGLVSOD\ ̞ ̞ ̞ ̞
5DSLG7UDYHUVH%HOO6KDSHG 7RRO*HRPHWU\:HDU&RPSHQVDWLRQ ̞ ̞ ̞ ̞
0D[LPXPSURJUDPPDEOH'LPHQVLRQ ̞ ̞ 6HUYR$GMXVWPHQW6FUHHQ ̞ ̞ ̞ ̞
̞ ̞ ̞ ̞ ̞ ̞
$FFHO'HFHO 7RRO2ƈVHW&RXQWHU,QSXW ̞ ̞ ̞ ̞
t 0DLQWHQDQFH,QIRUPDWLRQ6FUHHQ ̞ ̞ ̞ ̞
/LQHDU$FFHO'HFHO$IWHU 7RRO2ƈVHW0HDVXUHG9DOXH
/HDVW,QSXW,QFUHPHQW& ̖ ̖ ̖ ̖ ̞ ̞ ̞ ̞ ̞ ̞
̞ ̞ 'DWD3URWHFWLRQ.H\.LQG ̞ ̞ ̞ ̞
)HHGUDWH,QWHUSRODWLRQ 'LUHFW,QSXW
,QFK0HWULF6HOHFWLRQ ̞ ̞ ̞ ̞
+HOS)XQFWLRQ ̞ ̞ ̞ ̞
)HHGUDWH2YHUULGH 6WHSV ̞ ̞ ̞ ̞ 7RRO2ƈVHW0HDVXUHG9DOXH
,QWHUORFN ̞ ̞ ̞ ̞ ̝- ̝- ̝- ̝-
'LUHFW,QSXW% 6HOI'LDJQRVWLF)XQFWLRQ ̞ ̞ ̞ ̞
-RJ2YHUULGH 6WHSV ̞ ̞ ̞ ̞
0DFKLQH/RFN ̝ ̝ ̝ ̝
7RRO/LIH0DQDJHPHQW ̞ ̞ ̞ ̞ 6FKHGXOHG0DLQWHQDQFH6FUHHQ ̞ ̞ ̞ ̞
2YHUULGH&DQFHO ̞ ̞ ̞ ̞
(PHUJHQF\6WRS ̞ ̞ ̞ ̞
̖ ̖ $FFXUDF\2ƈVHW)XQFWLRQV +DUGZDUH 6RIWZDUH6\VWHP
0DQXDO)HHG3HU5HYROXWLRQ ̖ ̖
6WRUHG6WURNH&KHFN ̞ ̞ ̞ ̞ ̞ ̞ ̞ ̞
%DFNODVK&RPSHQVDWLRQ ̞ ̞ ̞ ̞ &RQƉJXUDWLRQ'LVSOD\
6WRUHG6WURNH&KHFN ̞ ̞ ̞ ̞
Program Input
7DSH&RGH (,$,62$XWR5HFRJQLWLRQ ̞ ̞ ̞ ̞ %DFNODVK&RPSHQVDWLRQE\ *UDSKLF'LVSOD\ ̞ ̞ ̞ ̞
6WURNH/LPLW&KHFN%HIRUH0RYHPHQW ̝- ̝- ̝- ̝- ̞ ̞ ̞ ̞
/DEHO6NLS ̞ ̞ ̞ ̞ 5DSLG7UDYHUVH)HHGUDWH '\QDPLF*UDSKLF'LVSOD\ ̝- ̝- ̝- ̝-
&KXFN7DLOVWRFN%DUULH ̝- ̝- ̝- ̝-
3DULW\&KHFN ̞ ̞ ̞ ̞ Editing 'LVSOD\/DQJXDJHV
0LUURU,PDJH (DFK$[LV ̖ ̖ ̖ ̖
&RQWURO,Q2XW ̞ ̞ ̞ ̞ 3DUW3URJUDP0HPRU\&DSDFLW\0E\WH ̞ ̞ ̞ ̞ (QJOLVK ̞ ̞ ̞ ̞
&KDPIHULQJ212)) ̞ ̞ ̞ ̞
2SWLRQDO%ORFN6NLS3LHFH ̞ ̞ ̞ ̞ 5HJLVWUDEOH3URJUDPV3URJUDPV ̞ ̞ ̞ ̞ -DSDQHVH .DQML ̝- ̝- ̝- ̝-
2YHUORDG'HWHFWLRQ ̞ ̞ ̞ ̞
2SWLRQDO%ORFN6NLS WR3LHFHV ɛ- ɛ- ɛ- ɛ- 3URJUDP(GLWLQJ ̞ ̞ ̞ ̞ 2WKHU/DQJXDJH ̖ ̖ ̖ ̖
3RVLWLRQ6ZLWFK ̞ ̞ ̞ ̞
3URJUDP1XPEHU2'LJLWV ̞ ̞ ̞ ̞ 3URJUDP3URWHFWLRQ ̞ ̞ ̞ ̞ 'LVSOD\/DQJXDJH'\QDPLF6ZLWFKLQJ ̞ ̞ ̞ ̞
Operation
3URJUDP)LOH1DPH&KDUDFWHUV ̞ ̞ ̞ ̞ ([WHQGHG3URJUDP(GLWLQJ ̞ ̞ ̞ ̞ MANUAL GUIDE 0i
$XWR5XQ 0HPRU\ ̞ ̞ ̞ ̞
6HTXHQFH1XPEHU1'LJLWV ̞ ̞ ̞ ̞ %DFNJURXQG(GLWLQJ ̞ ̞ ̞ ̞ 0$18$/*8,'(L ̝6 ̝6 ̝6 ̝6
0',5XQ ̞ ̞ ̞ ̞
$EVROXWH,QFUHPHQWDO&RPPDQG ̞ ̞ ̞ ̞ 6HWWLQJ'LVSOD\ 7<3(
'1&5XQ ̞ ̞ ̞ ̞ '\QDPLFODQJXDJHVZLWFKLQJ9LHWQDPHVH,QGRQHVLDQ7XUNLVK5XVVLDQ&KLQHVH
'HFLPDO3RLQW,QSXW3RFNHW 6WDWXV'LVSOD\ ̞ ̞ ̞ ̞ (QJOLVK3RUWXJXHVH6SDQLVK+LQGLDQG7DPLODUHVWDQGDUGRSWLRQV
'1&5XQZLWK0HPRU\&DUG ̞ ̞ ̞ ̞ ̞ ̞ ̞ ̞
&DOFXODWRU7\SH'HFLPDO3RLQW,QSXW ZKLOHRWKHUVDUHRSWLRQDO
3URJUDP1XPEHU6HDUFK ̞ ̞ ̞ ̞
'LDPHWHU5DGLXV3URJUDPPLQJ ;$[LV ̞ ̞ ̞ ̞

Smart Work Management (Option)

6HTXHQFH1XPEHU6HDUFK ̞ ̞ ̞ ̞
&RRUGLQDWH6\VWHP6HWWLQJ * ̖ ̖ ̖ ̖
6HTXHQFH1XPEHU&ROODWLRQDQG6WRS ̞ ̞ ̞ ̞
$XWRFRRUGLQDWH6\VWHP6HWWLQJ ̞ ̞ ̞ ̞
:URQJ2SHUDWLRQ3UHYHQWLYH ̖ ̖ ̖ ̖
'UDZLQJ'LPHQVLRQ'LUHFW,QSXW ̞ ̞ ̞ ̞
%XƈHU5HJLVWHU ̞ ̞ ̞ ̞
*&RGH6\VWHP$ ̞ ̞
01
̞ ̞
Simple and convenient operations are available.
'U\5XQ ̞ ̞ ̞ ̞
*&RGH6\VWHP%& ̖ ̖ ̖ ̖
6LQJOH%ORFN ̞ ̞ ̞ ̞
&KDPIHULQJ&RUQHU53URJUDPPLQJ ̞ ̞ ̞ ̞
-RJ)HHG
0DQXDO5HIHUHQFH3RLQW5HWXUQ
̞
̞
̞
̞
̞
̞
̞
̞
3URJUDPPDEOH'DWD,QSXW ̞ ̞ ̞ ̞ 01 Tool Life Management
6XE3URJUDP&DOO /HYHOV ̞ ̞ ̞ ̞ It can set tool life and tool wear compensation up by this function
'RJOHVV5HIHUHQFH3RLQW6HWWLQJ ̞ ̞ ̞ ̞
&XVWRP0DFUR ̞ ̞ ̞ ̞ to keep manufacturing quality.
0DQXDOKDQGOHIHHGXQLWV ̝ ̝ ̝ ̝

Interpolating Functions
$GGLWLRQDO&XVWRP0DFUR
&RPPRQ9DULDEOHV
̞ ̞ ̞ ̞
02 Load Monitor
3RLWLRQLQJ * ̞ ̞ ̞ ̞
6LQJOH&DQQHG&\FOH ̞ ̞ ̞ ̞ Detecting the max. loading to check each tool status.
([DFW6WRS0RGH * ̞ ̞ ̞ ̞
&RPELQHG&DQQHG&\FOH ̞ ̞ ̞ ̞
7DSSLQJ0RGH * ̞ ̞ ̞ ̞
&RPELQHG&DQQHG&\FOH,, ̞ ̞ ̞ ̞ 03 Parts and Machine Management
&XWWLQJ0RGH * ̞ ̞ ̞ ̞
'ULOOLQJ&DQQHG&\FOH ̞ ̞ ̞ ̞ For operating functions such as parts counter, program history, and machine utilization.
([DFW6WRS * ̞ ̞ ̞ ̞ ̞ ̞ ̞ ̞
&LUFXODULQWHUSRODWLRQE\5SURJUDPPLQJ
/LQHDU,QWHUSRODWLRQ * ̞ ̞ ̞ ̞ 0DFUR([HFXWRU ̞ ̞ ̞ ̞ 02 03
&LUFXODU,QWHUSRODWLRQ * ̞ ̞ ̞ ̞ &RRUGLQDWH6\VWHP6KLIW ̞ ̞ ̞ ̞
'ZHOO * ̞ ̞ ̞ ̞ &RRUGLQDWH6\VWHP6KLIW'LUHFW,QSXW ̞ ̞ ̞ ̞
3RODU&RRUGLQDWH,QWHUSRODWLRQ – – ̞ ̞ Miscellaneous Function/Spindle Functions
&\OLQGULFDO,QWHUSRODWLRQ – – ̞ ̞ 0)XQFWLRQ 0'LJLWV ̞ ̞ ̞ ̞
7KUHDG&XWWLQJ ̞ ̞ ̞ ̞ 6HFRQG0LVFHOODQHRXV)XQFWLRQ
̝- ̝- ̝- ̝-
0XOWLSOH7KUHDG&XWWLQJ ̞ ̞ ̞ ̞ %)XQFWLRQ
7KUHDG&XWWLQJ&\FOHDQG5HWUDFWLRQ ̞ ̞ ̞ ̞ 6SLQGOH)XQFWLRQV 6'LJLWV ̞ ̞ ̞ ̞
&RQWLQXRXV7KUHDG&XWWLQJ ̞ ̞ ̞ ̞ &RQVWDQW6XUIDFH6SHHG&RQWURO ̞ ̞ ̞ ̞
9DULDEOH/HDG7KUHDG&XWWLQJ ̞ ̞ ̞ ̞ 6SLQGOH2ULHQWDWLRQ ̞ ̞ ̞ ̞
3RO\JRQPDFKLQLQJZLWKWZRVSLQGOHV – – ̝- ̝- 5LJLG7DS 6SLQGOH&HQWHU ̞ ̞ ̞ ̞
5HIHUHQFH3RLQW5HWXUQ * ̞ ̞ ̞ ̞ 5LJLG7DS 5RWDU\7RRO – – ̞ ̞
17 18