Sht_____of_____

By:Fauzan Fazrie S
Project : BOX CULVERT DESIGN Ck:________
Task : Client: Bu Sandrila 4/25/2025 12:30:14 AM
Job No. : 1 File: BOX CULVERT.etcx p. 1 of 3

Spec.: Standard 17th ed. 2002

Design Method: Service Load
Type of Culvert: Precast

Physical Dimensions
Clear Span: 1.00 m
Clear Height: 1.00 m
Top Slab: 250 mm
Bottom Slab: 250 mm

5.50 m
Ext. Wall: 250 mm
Fill Depth: 0.60 m
Length: 5.50 m
Skew Angle: 0.00 deg
Bottom Slab Support: Full Slab
Top Haunch, Width: 120 mm
Top Haunch, Height: 120 mm
Bottom Haunch, Width: 120 mm
Bottom Haunch, Height: 120 mm

Material Properties
Concrete 1.50 m
Strength, f'c: 25.00 MPa Plan View
Density: 2400 kg/m3
Elasticity, Ec: 23500 MPa

250 mm
Type: Normal wt
Steel
Yield, fy: 420 MPa
Allow Stress: 25582 MPa
Elasticity, Es: 200000 MPa
Soil
Density: 2 kg/m3
Reinforcement Covers

1.00 m
Ext. Cover Top Slab: 80 mm
Ext. Cover Bottom Slab 80 mm
Ext. Cover Walls 80 mm
Int. Cover Walls 80 mm
Int. Cover Top Slab 80 mm
Int. Cover Bottom Slab 80 mm

250 mm

Loads
Live Load 250 mm 1.00 m 250 mm
Vehicle Names: Zero
Traffic Direction: Parallel Typical Section
Eq. Height of Soil: 1.10 m (Entered)
Dead Load Lateral Soil Loads
Future Wearing Surface: 0.00 kN/m Active, Ka: 0.64
Additional Dead Load: 147.15 kN/m
Concentrated Loads: none

Interior Water Pressure: yes, head pressure = 4.92 ft

Exterior Water Pressure: yes, head pressure = 4.92 ft

Eriksson Culvert - Analysis and design of culverts, version 6.03 Copyright © 2010-2024 Eriksson Software, Inc.(eriktech.com)
 Sht_____of_____
By:Fauzan Fazrie S
Project : BOX CULVERT DESIGN Ck:________
Task : Client: Bu Sandrila 4/25/2025 12:30:14 AM
Job No. : 1 File: BOX CULVERT.etcx p. 2 of 3

Concrete Summary
Volume of Concrete: 1.279 m3/m Total Volume of Concrete: 7.033 m3

Reinforcing Steel Bar Schedule (kg)

Location Mark QtySize Spacing Type Length Center Ver.Leg Tot.Weight
Top Slab(Int) A100 (AS2) 28 13 200 mm S 1.35 m -- -- 37.6
Bot Slab(Int) A200 (AS3) 28 13 200 mm S 1.35 m -- -- 37.6
Corner(Top) A1 (AS1) 44 10 125 mm U 3.05 m 1.32 m 0.86 m 74.8
Corner(Bot) A2 (AS1) 44 10 125 mm U 3.05 m 1.32 m 0.86 m 74.8
Wall(Int) B1 (AS4) 44 13 250 mm S 1.17 m -- -- 51.3
Longit. Top (Int) C100 (AS5) 6 10 200 mm S 5.49 m -- -- 18.6
Longit. Bot (Int) C200 6 10 200 mm S 5.49 m -- -- 18.6
Longit. Top (Ext) C1 (AS6) 6 13 250 mm S 5.49 m -- -- 32.7
Longit. Bot (Ext) C1 (AS6) 6 13 250 mm S 5.49 m -- -- 32.7
Longit. Wall (Ext) C1 (AS6) 10 13 250 mm S 5.49 m -- -- 54.6
Longit. Wall (Int) C1 (AS6) 10 13 250 mm S 5.49 m -- -- 54.6
488

125 mm 6 C1 Bars @ 250 mm 125 mm 250 mm 6 C100 Bars @ 200 mm 250 mm

250 mm

250 mm
250 mm

250 mm
5 C1 Bars @ 250 mm

5 C1 Bars @ 250 mm

5 C1 Bars @ 250 mm
5 C1 Bars @ 250 mm

250 mm

250 mm
250 mm

250 mm

125 mm 6 C1 Bars @ 250 mm 125 mm 250 mm 6 C200 Bars @ 200 mm 250 mm

Section Ext. Longit. Reinf. Section Int. Longit. Reinf.

Eriksson Culvert - Analysis and design of culverts, version 6.03 Copyright © 2010-2024 Eriksson Software, Inc.(eriktech.com)
 Sht_____of_____
By:Fauzan Fazrie S
Project : BOX CULVERT DESIGN Ck:________
Task : Client: Bu Sandrila 4/25/2025 12:30:15 AM
Job No. : 1 File: BOX CULVERT.etcx p. 3 of 3

125 mm

125 mm
22 B1 Bars @ 250 mm
22 B1 Bars @ 250 mm
125 mm

125 mm
Ext. Wall Reinf. Int. Wall Reinf.
50 mm

50 mm
28 A100 Bars @ 200 mm

28 A200 Bars @ 200 mm

50 mm

50 mm

Top Slab Int. Reinf. Bottom Slab Int. Reinf.

63 mm

63 mm
44 A1 Bars @ 125 mm

44 A2 Bars @ 125 mm
62 mm

62 mm

Top Slab Corner Reinf. Bottom Slab Corner Reinf.

Eriksson Culvert - Analysis and design of culverts, version 6.03 Copyright © 2010-2024 Eriksson Software, Inc.(eriktech.com)
 Sht:____of____
Eriksson Culvert v6.3.4 By:Fauzan Fazrie S Chk
Copyright © 2010-2024 Eriksson Software, Inc.(www.ErikssonSoftware.com) 4/25/2025 12:30:15 AM
Filename: BOX CULVERT.etcx Culvert p. 1 of 1
REINFORCEMENT SUMMARY
======================
M dimension = 0.04m (method of equivalent capacity)
= 0.05m (method of contraflexure - ASTM)
Reinforcing Steel Schedule
--------------------------
Bar Spacing As,prv As,str Length Mass H Leg V Leg Truck
Location Mark Qty Size Type (mm) (mm2/m) (mm2/m) (m) (kg) (m) (m)
Top Slab (int) A100 (AS2) 28 13 STR 200 645 583 1.35 38 AA
Bot Slab (int) A200 (AS3) 28 13 STR 200 645 610 1.35 38 AA
Corner Top-U A1 (AS1) 44 10 U-BAR 125 568 500 3.05 75 0.86 0.86 AA
Corner Bottom-U A2 (AS1) 44 10 U-BAR 125 568 500 3.05 75 0.86 0.86 AA
Ext Wall (int) B1 (AS4) 44 13 STR 250 516 500 1.17 51 AA
Top Slab (int- 1) C100 (AS5) 6 10 STR 200 355 288 5.49 19 AA
Bot Slab (int- 1) C200 6 10 STR 200 355 301 5.49 19 AA
Temperature ( 1) C1 (AS6) 6 13 STR 250 516 500 5.49 33 AA
Temperature ( 1) C1 (AS6) 6 13 STR 250 516 500 5.49 33 AA
Temperature ( 1) C1 (AS6) 10 13 STR 250 516 500 5.49 55 AA
Temperature ( 1) C1 (AS6) 10 13 STR 250 516 500 5.49 55 AA
Total 488
Note: A denotes flexural steel, B denotes vertical steel, C denotes longitudinal steel
AS Bar Marks
----------------
Location Governing Mode As Gvrn mm2/m
Transverse Side Wall - Outside Face (AS1) a 568
Transverse Top Slab - Inside Face (AS2) a 645
Transverse Bottom Slab - Inside Face (AS3) a 645
Transverse Side Wall - Inside Face (AS4) a 516
Distribution Top Slab - Inside Face (AS5) 355
Distribution Top Slab - OutSide Face (AS6) 516
Transverse Top Slab - Outside Face (AS7) c 0
Transverse Bottom Slab - Outside Face (AS8) c 0
Notes: 1.) Final areas of steel provided must be checked in analysis mode
2.) As Controlled By: a - Flexure, b - Crack Control, c - Minimum Steel, d - Fatigue
3.) AS7 and AS8 not required - corner steel has been extended