Scribd
Upload
12 views2 pages

Su en

The document provides specifications for Certipur® Buffer solution pH 7.00 yellow, a certified reference material for pH measurement produced by Merck KGaA. It includes details on accreditation, intended use, handling instructions, and associated uncertainties related to the pH value. The buffer solution is traceable to primary certified reference materials and has a shelf life of three years when stored properly.

Uploaded by

Antonio Campoblanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views2 pages

Su en

The document provides specifications for Certipur® Buffer solution pH 7.00 yellow, a certified reference material for pH measurement produced by Merck KGaA. It includes details on accreditation, intended use, handling instructions, and associated uncertainties related to the pH value. The buffer solution is traceable to primary certified reference materials and has a shelf life of three years when stored properly.

Uploaded by

Antonio Campoblanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.sigmaaldrich.

com

Specification – Certified Reference Material

Certipur® Buffer solution pH 7.00 yellow (20°C)


Certified Reference Material for pH measurement

Accreditation:

Merck KGaA, Darmstadt, Germany is accredited by the


German accreditation authority as registered reference
material producer (D-RM-15185-01-00) in accordance with
ISO 17034.
ͲZDͲϭϱϭϴϱͲϬϭͲϬϬ

Producer: Merck KGaA, Frankfurter Str. 250, 64293 Darmstadt, Germany


Product no.: 1.99057.0500
Description of CRM: Certipur® Buffer solution pH 7.00 yellow (25°C)
Certified Reference Material for pH measurement
Expiry date: 3 years
Storage: +15°C to +25°C tightly closed in the original container
Composition: di-sodium hydrogen phosphate / potassium dihydrogen phosphate

Associated uncertainty, U=k·u


Specification
(k=2)
pH value 6.99 – 7.01 ±0.02 (25°C)

Metrological traceability: The pH value of this certified buffer solution is directly traceable to primary
certified reference materials characterised by PTB and verified by SRMs from NIST.
NIST 189x, 188x, 185x, 186 Ix, 186 IIx, 187x
PTB OX-xxx/xx, TA-xxx/xx, PHT-xxx/xx, PHO-xxx/xx, BO-xxx/xx
PTB: Physikalisch Technische Bundesanstalt, Braunschweig, Germany
NIST: National Institute of Standards and Technology, Gaithersburg, USA
Measurement method: pH value is measured with a combined glass electrode after 5-point calibration
according to DIN 19268 with reference buffer solutions according to DIN 19266,
IUPAC, NIST, Ph.Eur. and USP.

Merck KGaA, Corporation with General Partners, Frankfurter Straße 250, 64293 Darmstadt, Germany
EMD Millipore Corporation, 400 Summit Drive, Burlington MA 01803, USA, Phone: +1-978-715-4321
MilliporeSigma Canada Ltd., 2149 Winston Park Dr, Oakville, Ontario, L6H 6J8, Canada,
Phone: +1 800-565-1400

Specification Page 1 of 2 Specification version 01


Intended use: This reference material is intended for use as a calibration standard for pH instru-
ments or pH electrodes or as a control sample for measuring the pH value.
Instructions for handling The pH value is strongly dependent on the temperature. It is therefore necessary
and correct use: to keep the temperature constant within the measurement.
Health and safety Please refer to the Safety Data Sheet for detailed information about the nature of
information: any hazard and appropriate precautions to be taken.
Preparation: This reference material is prepared gravimetrically from di-sodium hydrogen
phosphate, potassium dihydrogen phosphate and high purity water.

Associated uncertainty:
The expanded uncertainty UCRM is calculated as UCRM=k·uCRM, where k=2 is the coverage factor for a 95% coverage
probability and uCRM is the combined standard uncertainty in accordance to ISO 17034.

The combined uncertainty uCRM is derived from combination of the squared uncertainty contributions:
uCRM = √ u2Characterisation + u2Homogeneity + u2Stability

ucharacterisation: is the uncertainty in accordance with DIN EN ISO/IEC 17025 which includes e. g.
contributions of the primary reference material and the measuring system.
uhomogeneity: is the between-bottle variation in accordance with ISO 17034. The assessment
of homogeneity is performed by analysis of a representative number of
systematically chosen sample units.
ustability: is the uncertainty obtained from short-term and long-term stability in accordance
with ISO 17034. The stability studies are the basis for the quantification of the
expiry date of this reference material for the unopened bottle.

Informative values:
Temperature dependence1: Temperature [°C] ∆ pH
5 + 0.09
10 + 0.06
15 + 0.04
20 + 0.02
25 ± 0.00
30 - 0.02
35 - 0.03
40 - 0.05
45 - 0.06
50 - 0.07
1Temperature
deviation data provided for reference only. Values are not batch-specific and should not be
considered certified values.

Detailed information is provided by the certificates and the certification report on our website.

The vibrant M, Supelco, Certipur and Sigma-Aldrich are trademarks of Merck KGaA, Darmstadt, Germany or its
affiliates.
Detailed information on trademarks is available via publicly accessible resources.
© 2024 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.

The life science business of Merck KGaA, Darmstadt, Germany operates


as MilliporeSigma in the U.S. and Canada.

Specification Page 2 of 2 Specification version 01

You might also like