Scribd
Upload
4 views

Rfid Reader

ThingMagic Nano is a compact UHF RAIN RFID module designed for low power consumption and small form-factor applications, making it suitable for portable readers and various industries including healthcare and mobile devices. It supports EPCglobal Gen2V2 protocol and is configurable for multiple global regions, with a maximum read rate of 200 tags per second and a read distance of over 4.5 meters. The module is part of JADAK's RFID product line, which focuses on embedded detection and analysis solutions.

Uploaded by

skshrihari7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Rfid Reader

ThingMagic Nano is a compact UHF RAIN RFID module designed for low power consumption and small form-factor applications, making it suitable for portable readers and various industries including healthcare and mobile devices. It supports EPCglobal Gen2V2 protocol and is configurable for multiple global regions, with a maximum read rate of 200 tags per second and a read distance of over 4.5 meters. The module is part of JADAK's RFID product line, which focuses on embedded detection and analysis solutions.

Uploaded by

skshrihari7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ThingMagic Nano

Tiny Embedded UHF RAIN® RFID Module


ThingMagic Nano is the smallest form factor for a Mercury
Series embedded UHF RAIN RFID module. With very low
power consumption, it is ideal for battery-operated, low cost,
small form-factor portable readers. ThingMagic Nano’s wide RF
22 mm L x 26 mm W x 3.0 mm H
output range (0 dBm to +27 dBm) is important for the read/write
requirements for RFID-enabled printers and tag commissioning
Features & Benefits:
stations.
• Small Service Mount
Technology (SMT) Form ThingMagic Nano features a surface mount package designed
Factor for Highly for the efficiency of SMT manufacturing, driving down the total
Integrated, Compact cost for embedding RFID in volume applications. It is ideal for
Designs handheld devices, consumables authentication, device
configuration and access control.
• Low Power Consumption
for Efficient Battery-Use
ThingMagic Nano is supported by ThingMagic API.
• Support for EPCglobal
Gen2V2 (ISO 18000-63) Applications:
Protocol Meets Industry
Tag Standards
• Medical Equipment for Healthcare and
• Configured for Multiple Pharmaceutical Industries
Regions, such as FCC • Kiosks and Vending Machines
(North & South America), • Mobile Devices, including Printers, Handhelds, and
ETSI (European Union),
and Other Regions
Sensor Networks
Including India, China, • Tag Commissioning Stations
Korea, Australia and Japan • Battery-operated
With Single SKU for Global • Smartphone Accessories
Use
ThingMagic Nano

Ordering Information
Module M6E-NANO
Development Kit M6E-NANO-DEVKIT
Physical
Dimensions 22 mm L x 26 mm W x 3.0 mm H (0.87 in L x 1.02 in W x 0.12 in H)
Tag / Transponder Protocols
RFID Protocol Support EPCglobal Gen 2V2 (ISO 18000-63)
RF Interface
RF Transceiver Impinj R500
Antenna Connector Single 50 Ω connection (board-edge)
RF Power Output Separate read and write levels, command-adjustable from 0 dBm to +27 dBm in 0.01 dB steps
Pre-configured for the following regions:
FCC (NA, SA) 917.4-927.2 MHz; ETSI (EU) 865.6-867.6 MHz; TRAI (India) 865-867 MHz; KCC (Korea)
Regulatory
917-923.5 MHz; ACMA (Australia) 920-926 MHz; SRRC-MII (P.R. China) 920.1-924.9 MHz; MIC (Japan)
916.8-922.2 MHz; ‘Open’ (Customizable channel plan; 859-873, 915-930 MHz)
Data/Control Interface
41 board-edge connections providing access to RF, DC power, communication, control and GPIO
Physical
signals
Control/Data Interfaces UART; 3.3V logic levels 9.6 to 921.6 kbps
GPIO Sensors and Indicators Four 3.3V bidirectional ports configurable as input (sensor) ports or output (indicator) ports
API support C#/.NET, Java, C
Power
DC Voltage: 3.3 to 5.5 V for +25 dBm out; 3.7 to 5.5 V for +27 dBm out
DC Power Required DC power consumption @ RF level:
3.2 W @ 5 VDC for +27 dBm out*, 2.9 W @ 5 VDC for +25 dBm out, 1.5 W @ 5 VDC for 0 dBm out
Power Consumption when not transmitting 0.84 W
Ready: 0.84 W
Idle Power Saving Options Sleep: 0.015 W
Shutdown: 0.00025 W
Environment
USA (FCC 47 CFR Ch. 1 Part 15); Canada (Industry Canada RSS-21 0); EU (ETSI EN 302 208 v3.1.1,
Certification
RED 2014/53/EU)
Operating Temperature -40°C to +60°C (case temperature)
Storage Temperature -40°C to +85°C
Shock and Vibration Survives 1 meter drop during handling
Performance
Max Read Rate Up to 200 tags/second
Max Tag Read Distance Over 4.5 meters (15 feet) with 6 dBi antenna (33 dBm EIRP)
Specifications subject to change without notice. *Best case with good antenna matching

About JADAK:
JADAK, a business unit of Novanta, is a market leader in machine vision, RFID, barcode, printing, and color and light measurement products and
services for original equipment manufacturers. The business designs and manufactures custom embedded detection and analysis solutions that help
customers solve unique inspection, tracking, scanning and documenting challenges. JADAK is based in Syracuse, New York, with sales and technical
locations across the globe. For more information, visit www.jadaktech.com.
ThingMagic is JADAK’s RFID line of products.

Novanta is a trusted technology partner to OEMs in the medical and advanced industrial technology markets, with deep proprietary expertise in
photonics, vision and precision motion technologies. For more information, visit www.novanta.com.

© 2021 Novanta Inc. and its affiliated companies. All rights reserved. Rev 04032021

You might also like