Scribd
Upload
7 views

VSL100 Vehicle Speed Limiter Specifications

The Intelligent Vehicle Speed Limiter VSL100 is a microcomputer-controlled device designed to enforce speed limits and enhance road safety by monitoring vehicle speed and providing alerts for violations. It features GPS and GSM connectivity, data recording capabilities, and tamper-proof mechanisms to ensure compliance. The device is suitable for various applications including vehicle management, logistics, and transportation of hazardous materials.

Uploaded by

Hichri Mounir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

VSL100 Vehicle Speed Limiter Specifications

The Intelligent Vehicle Speed Limiter VSL100 is a microcomputer-controlled device designed to enforce speed limits and enhance road safety by monitoring vehicle speed and providing alerts for violations. It features GPS and GSM connectivity, data recording capabilities, and tamper-proof mechanisms to ensure compliance. The device is suitable for various applications including vehicle management, logistics, and transportation of hazardous materials.

Uploaded by

Hichri Mounir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Intelligent Vehicle Speed Limiter

VSL100
Specification
1. Diagram

 Print: connect to mini printer

 CDC: configuration cable

 GPS: GPS antenna

 GSM: GSM antenna

 Light: GPS green light/GSM red light

 MIC: microphone

 Serial port: undefined

 Input /Output: connect to power cables.

GPS LED Green


If GPS LED light every 1 second flash 1 time, GPS Not have signal.
If GPS LED light within 1 second flash 2 times, GPS signal located.
GSM LED Red (Reading SIM card)
If GSM LED light every 1 second flash 1 time, GSM failed.
If GSM LED light within 1 second flash 2 times, GSM signal OK.
Input / Output

(black)GND Negative (------)Out1 External relay

(red)Power_in Positive (------)High Door+

(white)ACC Ignition wire (------)Low Door -

(yellow)Pulse Speed sensor wire (------)AD1 Printer wire

(orange)87A Relay input (------)AD2 Fuel sensor

(blue)30 Relay output (red)SOS SOS postitive


Preface
How does the road speed limiter works
The road speed limiter is controlled by microcomputer to realize the effective
control of the high speed, to avoid the potential safety risk caused by over
speed driving, and at the same time to ensure the free action of accelerator
pedal within the scope of speed limit.

Application Field:
 Vehicle Commanding and Dispatching System;
 Heavy Construction Vehicles Tracking Device;
 Dangerous goods transportation;
 Passenger Car Management;
 Logistics vehicle management.
 Oil Tanker Monitoring and Management

Product Features
 Speed limiter
Enforce to limit the speed of your vehicle if preset maximum speed reach
Pre-warn at a speed of 5% less than preset speed.
 Tamper proof
Maximum speed is 40km/h if maximum speed is tampered or sensor is cut.
 USB flash download data
Data can be stored for 72 hour at intervals of 5 seconds
Data can be retrieved using a USB flash
 Printer
Violations can be printout for the last one hour driving.
Portable printer prevents drivers from printing
Speed violations can be printable
 Violations alarm
All violations (over speed, tamper maximum speed, fatigue driving, enter and
out of fence, emergency brake) will be transmitted to platform.
 Any lose of signal between the device and the storage system for more
than 5 minutes will automatically email alarm to administrators.
 Real time fleet tracking
Specifications
Content Specs.
Dim. 118（L）x75(W)x29(H) mm
Weight 50g
Network GSM/GPRS
Frequency 850/900/1800/1900 MHz
MCU STM32
GPS/GSM module
Quectel MC20
GPS channel 66
Tracking sensitivity -165dBm
Location accuracy <10 meters CEP
Cold status <35s
Time To First Fix(open sky)
Hot status <1s
Working voltage 9-36VDC
GPRS Protocol Class12, TCP/IP
Operating temp. -20°C to +70°C
Back up battery 500mAh /3.7V Li-Polymer battery
Standby & Working
5mA~50mA
consumption
GSM / GPS antenna external
G-Sensor Support
Memory Capacity 4MB memory
Configuration Mode PC tool/GPRS/SMS
Buzzer Built-in
Speed limit Scope 40-120KM/H
Speed Limit Deviation ±5KM/H
Product Features
1) GPS / GSM / GPRS record data, record and send data every 5 seconds,
2) When connecting the odometer speed signal line, limit the speed to the
preset speed value. If the signal line is disconnected, the speed is limited
to 40 kph.
3) Get speed from vehicle odometer and GPS location information.
4) USB Type-A interface-external printer
5) ACC detection, ACC ignition ON/OFF alarm, Cut engine / recovery
6) Set ACC ignition ON/OFF interval
7) Voice listening
8) Built-in buzzer for sound when alarm
9) Fuel detection with optional fuel sensor
10) Detecting door status, door open alarm
11) Built-in acceleration sensor
12) SOS alarm / low power alarm / overs peed alarm / out fence alarm
/vibration alarm / ignition ON/OFF alarm / power failure alarm
13) Fatigue driving behavior detection and reporting to the platform

Tamper proof
1) GPS and GSM antenna(tamper with GPS signals restrict speed at 40kph)
2) Speed Sensor wire (tamper with sensor cable restrict speed at 40kph)
3) Power cable (tamper with power cable and the engine automatically goes
off)
4) Ignition cable (tamper with ignition cable and the engine automatically
goes off)
5) Ground / -ve (tamper with ground cable and engine automatically goes off )
6) Disconnect input cable (+ve cable) and the engine automatically stops.
7) Disconnect the output cable and the engine automatically stop.

Data recording
1) The governor should be able to store data for at least 72hrs.
2) The recordings should be 5 seconds interval.
3) After installation the first one hour data should be available at any time.
a) This data shows the first one hour data and location of the vehicle.
b) The first one hour Data should be available both online and offline.
4) PC tool configuration software have the data under the following time
i. intervals:
(i) First one hour after installation data. (Permanent / not erasable)
(ii) Last one hour data. (Speed , violations)
(iii) Last 72 hours data
(iv) Last 6 hours data Over speed data

You might also like