Scribd
Upload
10 views1 page

Victor – project12 Cycleworks

The Victor is a custom, handbuilt steel bike designed for short travel full suspension with 80mm rear travel and bespoke geometry. It features a Reynolds 853/631 or Columbus Zona tubeset, various shock options, and starts at €2,950 for a custom frame. Additional customization options are available, including different finishes and components.

Uploaded by

Carlos Pedro Sant'Ana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

Victor – project12 Cycleworks

The Victor is a custom, handbuilt steel bike designed for short travel full suspension with 80mm rear travel and bespoke geometry. It features a Reynolds 853/631 or Columbus Zona tubeset, various shock options, and starts at €2,950 for a custom frame. Additional customization options are available, including different finishes and components.

Uploaded by

Carlos Pedro Sant'Ana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

project12 models process/how to order archive media contact

Victor is a steel, handbuilt,


Victor can be ordered like any
filletbrazed short travel full
other project12 bike; send me
suspension with a
a message with your dreams
bespoke geometry and
and ideas and we’ll discuss
size.
until we get the best bike for
With a whopping 80mm of
you.
rear travel and a swift playful
geometry this is my go to Technical specs Mk3:
bike for the Dutch XC loops. – Tubeset: Reynolds 853/631
The rear shock gives better and/or Columbus Zona.
traction, control and comfort – Headtube 44mm for
than a true softtail, but it still ZS44/EC44 headset
has that hardtail feel. Victor – Either 142×12 or 148×12
just takes the edge off. – Max tyre size: 29×2.4
My prefered XC layout is – Max chainring size: 34t boost,
with a sturdy 120mm fork 32t non boost, 36t boost might
(SID35, Fox34) and a be possible, depending on tyre
modern geometry. A 66° and framesize.
headtube angle and a longer – Shock length: Standard 165,
reach with a short stem 170 or 190mm
won’t make it any slower on – Shock stroke: Max 40mm
the classic XC tracks, but it – Max length seattube: 450mm
will be much quicker and a (Victor will fit riders up to 190cm
lot more fun on the techy length, for taller riders I advise
stuff. Vertigo)
– Bearings: Enduro Max,
4×6901 and 2×6902
– Shock hardware: 50×8 and
22×8

A custom Victor frame starts


at € 2.950,- This includes a
RAL color powdercoat finish,
thru axle, seatclamp and
Enduro Max bearings.
Options:
– Rockshox Monarch RL: €
200,- (with hardware)
– Rockshox SIDluxe: €320,-
(with hardware)
– Filed and sanded fillets at
headtube and seattube: € 200,-
– Internal cables in front
triangle: € 50,- per cable (free
for dedicated AXS)
– Fancy powdercoat
(metallic,candy etc): €150,-
– 2 tone RAL powdercoat:
€100,-

Complete bikes are also


possible.

Raw, unfiled fillet

Finished fillet, after filing and sanding

project12 Cycleworks – [email protected] – www.project12.cc

kvk:68702949 – btw:NL001645401B66 – bank:NL33INGB0654924511

You might also like