0% found this document useful (0 votes)
20 views

5-2. Battery Charger Manual - GPC

The document is a user manual for the Automatic Battery Charger Model EBC-15, detailing its features, specifications, and operational instructions. It highlights the charger's safety measures, charging modes, and display functions, as well as troubleshooting alarms. The manual provides essential information for optimal use and maintenance of the charger, including input/output specifications and safety protections.

Uploaded by

Sorin Baican
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
20 views

5-2. Battery Charger Manual - GPC

The document is a user manual for the Automatic Battery Charger Model EBC-15, detailing its features, specifications, and operational instructions. It highlights the charger's safety measures, charging modes, and display functions, as well as troubleshooting alarms. The manual provides essential information for optimal use and maintenance of the charger, including input/output specifications and safety protections.

Uploaded by

Sorin Baican
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea

www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

User’s Manual

Automatic Battery Charger

Model : EBC-15

1 /6
#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea
www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

Contents

1. General

2. Features and strong points

3. Charging capacity and configuration

4. Main functions

5. Display designation and description

6. Charging mode setting

7. Alarms and trouble shouting

2 /6
#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea
www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

1. General
This product is a fixed-type charger with high-speed switching mode using FET and
can be applied to the system for the automatic charging of generator battery or lead storage battery.
Since it is basically embedded with safety and protective devices for lead storage battery,
many disasters and emergency condition can be prevented. Also, GPC recommend equal charging
once a month to improve battery life and performance.

2. Features and strong points


- Semi-permanent. (using high-performance FET)
- Charging can be done in optimal condition with the application of constant voltage
and constant current control method.
- The response speed depending on the load characteristic is fast, and accidents caused
by over current are prevented.
- Safety measures have been fully applied for over voltage & current, inverse voltage & current
and temperature protection.
- The embedded stable micro control unit always detects the battery state.
- Output voltage & current and charge state are digital monitored from the out panel.
- Various set points can be set with simple button operation.
- The volume is small and is hardly influenced by the change rate of input voltage.

3. Charging capacity and configuration


- Input voltage : AC220V 60Hz / AC110V(Option)
- Output voltage : DC26.5V
- Charging current : Max. 15A
- Configuration : SMPS, Relay Block, Control Board and Display

4. Main functions
1) Display main function
- Selection charging mode (Float/Equal)
- Indication battery low voltage (21.5V)
- Indication over voltage (31V)
- Automatic detection charging circuit fail and battery broken
- Lamp test button
- Over&low voltage simulation test
- Charging voltage and charging current, real time display
- Over current protection at the starting condition

2) SMPS main function


- Over voltage protection
- Over current protection
- Miss connection protection (circuit error)
- Over temperature protection

3 /6
#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea
www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

5. Display designation and description

1) DC VOLT. (V)
- Indicate charging voltage
2) DC AMP. (A)
- Indicate charging ampere
3) STATUS LED
- Indicate power on/off and charging mode (Float / Equal)
4) ALARM LED
- Indicate what is wrong (Over & Low voltage / Charging Error)
5) OVER & LOW VOLTAGE P/B
- Function of simulation test
6) RESET P/B
- After clearing trouble, turn off alarm lamp
7) MODE P/B
- System setting mode
8) LAMP TEST P/B
- All lamp on condition

4 /6
#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea
www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

6. Charging mode setting

1 2

1) Charging mode setting.

- Enter setting mode by pushing “MODE”④ button for 2 seconds

- Indicated “F00” on “DC VOLT. (V)”①

- Indicated value on “DC AMP. (A)”② as below

1) 00F : Float mode 2) 00E : Equal mode

- Next setting value : push “OVER VOLT. TEST”③ button

*Default value: 00F : Float mode

- Save by pushing “MODE”④ button for 2 seconds

5 /6
#164, Techno valley 1-ro, Jillye-myeon, Gimhae-si, Gyeongnam-do, Korea
www.gpckorea.com Tel : 82-55-343-9870 Fax : 82-55-343-9875 E-mail : [email protected]

7. Alarms and trouble shouting

Alarm Alarm remarks. Trouble shouting


Battery low voltage
(21.5V) It is on when battery low volt
and battery over volt of battery. Check the battery
Or it is on when A.C. power and A.C. power
Battery over voltage ( 110V or 220V ) cut off.
Battery (31V)
charger
fail.
Check the battery
Battery charging It is on when battery charging charger fuse &
circuit Error circuit error of battery charger. battery charging
line.

6 /6

You might also like