Scribd
Upload
0 views

STATICS EXAM

This document outlines the examination details for the Engineering Mechanics course at the University of Aden for the academic year 2022/2023. It includes instructions for answering questions, diagrams for various problems, and specific questions related to force systems, beam reactions, and load calculations. Students are required to answer four out of six questions, with emphasis on drawing Free Body Diagrams.

Uploaded by

Emad AL-Waly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 views

STATICS EXAM

This document outlines the examination details for the Engineering Mechanics course at the University of Aden for the academic year 2022/2023. It includes instructions for answering questions, diagrams for various problems, and specific questions related to force systems, beam reactions, and load calculations. Students are required to answer four out of six questions, with emphasis on drawing Free Body Diagrams.

Uploaded by

Emad AL-Waly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIVERSTY OF ADEN

FACULTY OF ENGINEERING
ODD SEMESTER EXAMINATION FOR ACADEMIC YEAR
(2022/2023)

Subject : Engineering Mechanics Date :


Class : B2CE Time : 2 hrs

Notes :
(1) Answer any FOUR questions from the six questions .
(2) Free Body Diagrams wherever must be drawn neatly and clearly .
100 N

0.1 m 0.2 m 0.1 m

QUESTION (1) C B

In figure (1) , Replace the force _couple system 45o


0.15 m
0.15 m 0.15 m
acting on the frame by single equivalent resultant 300 N
force and moment at the point (B) . Specify where 200 N
the line of action of the resultant force intersects 60o D
the members (AB) and (BC) measured from (B). 0.15 m
150 N
60 N.m
A

QUESTION (2)
In figure (2) , The beam (AB) is supported by the
D
cable (CD) and by two rollers at (A) and (B) . 1.5 m
Draw the (F.B.D) , then determine : C 30o B

(1) The tension in the cable (CD) . 1m 1.5 m 30o


1.5 m
(2) The reaction of the roller support (A) .
(3) The reaction of the roller support (B) . A 40 kN 20 kN

E
QUESTION (3) 5
4
D 3
In figure (3) , The mass of block (A) is 40 kg and F
the mass of block (B) is 30 kg . If whole system is
in equilibrium . Determine : C
𝛉 30o

(1) The angle (𝛉) required for equilibrium .


(2) The tension in the wire (CD) ,(DE) & (DF) . B
A
QUESTION (4)
40 kN/m
In figure (4) , The beam (AE) is subjected to 30 kN/m
50 kN
different types of loads . Determine : 20 kN/m
15 kN/m
(1) The total load acting on the beam (WT).
(2) The support reaction at (A) and (E) . A B C D E
(3) The shear force and the bending moment
3m 3m 1.5 m 3.75 m
at the point k (5 m from the end A) .

QUESTION (5)
15 kN 25 kN
In figure (5) , The beam shown in the figure is
subjected to different types of loads . 20 kN/m 20 kN/m

(1) Draw the shear force and the bending D


A B C
moment diagrams of the beam .
(2) Find the location and the magnitude of the 5m 2.5 m 2.5 m
maximum bending moment .

QUESTION (6)
In figure (6) , The beam shown in the figure is
40 kN/m
subjected to different types of loads . 25 kN/m
50 kN/m

(1) Draw the shear force and the bending


A B C D
moment diagrams of the beam .
(2) Find the location and the magnitude of the
2m 4m 2m
maximum bending moment .

WITH THE BEST LUCK


Mr. Emad Al-waly

You might also like