PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU

SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS

S.NO DESCRIPTION
SUPPLY
1 CIVIL AND INTERIOR WORKS 31,380,950
2 FIRE HYDRANT SYSTEM 231,592
3 SPRINKLER SYSTEM 956,980
4 FIRE DETECTION AND ALARM SYSTEM AND PA 1,808,680
5 FIRE EXTINGUISHERS 108,300
6 SIGNAGES 12,600
7 COMPRESSED AIR SYSTEM 283,018
8 COMPRESSOR AND ACESSORIES WITH PIPING 1,500,000
9 GRIPPLE SUPPORTS FOR PIPING WORKS 500,000
10 PLUMBING WORKS 200,000
11 OPEX WORKS FOR FIRE AND MECH SYSTEM
12 TOTAL FOR11KV HT INFRASTRUCTURE WORKS 7,330,000
13 TOTAL FOR POWER WORKS 7,174,588
TOTAL FOR INTERNAL & EXTERNAL LIGHTING
14 962,638
WORKS
15 TOTAL FOR OPEX ELECTRICAL WORKS
16 IT WORKS ( PASSIVE COMPONENTS ONLY ) 1,122,843
17 CCTV WORKS 787,000
18 PRODUCTION BLOCK - HVAC SYSTEM AND ASSOCIA 5,521,436
19 OFFICE BLOCK - HVAC SYSTEM AND ASSOCIATED 1,323,275
20 DESIGN ENGINEERING SERVICES FEES

SUB TOTAL 61,203,900

ADD IGST @ 18% 11,016,702
GRAND TOTAL 72,220,602
Remarks 8
 DATE 4/1/2025
REVISON R0

Remarks
INSTALLATION

61,342
278,850
151,019
2,900
260
51,220
150,000
50,000
50,000
500,000
2,762,450
1,129,315

84,578

140,125
197,451
184,900
724,970
178,500
1,950,000

8,647,880
1,556,618 GST AS APPLICABLE ON ITEM BASIS

10,204,498
82,425,100
AEDBM CONSULTANTS PRIVATE LIMITED
ESTIMATION SHEET
CLIENT : VALUE SPACES LOGISTICS PRIVATE LIMITED
PROJECT: PROPOSED VALUE SPACES LOGISTICS & INDUSTRIAL PARK POLIVAKKAM PVT LTD
CO-ORDINATOR :
ESTIMATOR :
TITLE / BUILDING NAME : WAREHOUSE 4

Sl no DESCRIPTION Unit Qty Rate Amount (Rs)

1 EARTHWORK IN EXCAVATION 0
Earth Work in excavation by Manual / Mechanical means (Hydraulic Excavator like JCB
/Poclain/with bucket) in foundation, wall, columns, plinth beams, basement, raft, ducts,
equipment foundations, pile caps, storm & SW drains & its chambers, trenches, UG sump,
rain water harvesting pit, septic tanks, soak well etc. including dressing of sides and
ramming of bottoms. Rate shall be inclusive of shoring, strutting, removal of slurry,
dewatering, removing and stacking simultaneously the excavated soil anywhere at
any lead within site premises and/or spreading soils in layers for site development,
all other incidental charges etc, including backfilling in foundations, behind RCC walls and 0
including watering to have the optimum moisture content sufficient for the compaction and
consolidating each deposited layer with 8 - 10 Tonne vibro rollers or plate compactors
(where rollers are not accessible) to a proctor density of 98% complete as per the MORTH
section 900 specifications. Work shall be carried out as per the instructions of Engineer-
in-charge.

i From NGL to 1.5m in All kinds of soil including murrum, soft rock, weathered rock / highly
weathered rock, etc.. Cum 68 450 30,600.00
0
2 PLAIN CEMENT CONCRETE & PLUM CONCRETE 0
Providing and laying Plain Cement Concrete 1:3:6 (1 cement : 3 coarse sand :6 graded
stone aggregate 20mm nominal size) including necessary shuttering in leveling courses
under foundations, pipelines, pits, under floors etc., complete at all levels and locations as
Cum 5 5,800 29,000.00
directed by Engineer Incharge .
0
3 BRICK WORKS 0
Providing brick work using M-.35 grade bricks( with minimum compressive strength of 35kg/sq.
cm) in cement mortar 1:6 (1 cement : 6 coarse sand) in superstructure at all heights and locations Cum 21 8,500 178,500.00
including scaffolding, staging, curing etc., complete.
0
Providing brick work of half brick thickness using M - 35 grade bricks in Cement Mortar 1:4 (1
cement : 4 coarse sand) , proportions in walls at all heights as per specifications including
scaffolding, curing and providing RCC band of size 100 x 80mm with 2 Nos. of 6mm dia MS Bars Sqm 27 1,200 32,400.00
at every 1mtr interval etc., including the cost of MS reinforced steel. Complete at levels and
locations and as directed by engineer in charge

0
4 REINFORCED CEMENT CONCRETE 0

Providing and laying in position M-25 Grade Reinforced Cement Concrete machine
batched, machine mixed, and machine vibrated design mix cement concrete of specified
grade with Minimum Cement Content of 325 Kg Per Cum of concrete and water cement
ratio not more than 0.5 for reinforced cement concrete structural elements including the
cost of centering, shuttering finishing and excluding reinforcement, including adding
admixtures in recommended proportion ( as per IS 9103 ) to accelerate, retard setting of
concrete improve workability without impairing strength and durability, and necessary
curing etc.,complete all as directed at all levels and heights .

The designing of concrete mix for different grades of controlled concrete should be done
in accordance with latest IS 456 and SP-23 and other codes mentioned in the specs.
( Hand book on concrete mix design ) in an approved lab and the same should be got
approved by Consultant. ( Note 1 : The use of Fly Ash / GGBS are allowed in RMC. Notes
2 : Minimum cement content to be provided as per technical specifications OR as per IS :
456-2000. Note 3 : No separate measurement will be considered for Wastage and the
contractor has to include the same in his rates. )

M-25 grade Reinforced Cement Concrete. All works below and above plinth level.
i RCC for Footing, Raft Cum 15 8,500 127,500.00
ii RCC for Pedestal Cum 6 11,500 69,000.00
iii RCC for Wall Cum 13 12,500 162,500.00
0
5 REINFORCEMENT STEEL 0

Providing , fabricating & fixing in position reinforcement for RCC work with Thermo
mechanically Treated (TMT) bar of various diameters and grade of steel as specified
below conforming to IS specification including cutting, bending, hoisting, fabricating and
placing in position according to drawings and binding the reinforcement with MS binding
wire in two strands of 18 gauge and providing M25 Grade Cement cover blocks for
placing the reinforcements in position and for maintaining the cover specified and/or
according to relevant IS. Note : Unless noted otherwise the measurements in
accordance with IS 1200. However reinforcement shall be measured only in lengths of
bars as actually placed in position on standard weight basis, no allowance being made in
the weight for rolling margin. Authorised laps and splices, chairs of any shape & profile,

Spacer bar of any shape & profile only will be measured and paid seperately. Cover block,
wastage and binding wire shall be included in the quoted rate and to include lead, lift,
placing at all levels and as per the approved bar bending schedule,etc., complete all as
directed.
a a) TMT bars of grade Fe-500 conforming to IS - 1786/85 Mtn 5 90,000 450,000.00
0
6 SHUTTERING WORKS 0

Providing and erecting in position form work shuttering & boxing using steel / plywood /
props / bracing / scaffolding / ledges and other shuttering materials of approved quality for
concrete elements vertical, horizontal or inclined etc. in all shapes (except circular and
curvilinear) as per drawing including necessary scaffolding, bolts/nuts, fastener nails,
wires for keeping in position till concrete is laid and members have acquired required
strength, removal thereafter, applying shuttering oil, hacking etc. in line, level and plumb,
all complete as per specification or as directed. At all levels, heights & depths for all
concrete elements of linear shape, size & direction etc.

i Footing, Raft Sqm 48 500 24,000.00

ii Pedestal Sqm 48 550 26,400.00
iii RCC for Wall Sqm 120 600 72,000.00

5.B
Supplying and Grouting of Pockets in-between the foundation top and Base Plate ,inside
the concrete structures using Conbextra GP2 of M/s Fosroc Chemicals or approved
equivalent including making arrangements to fix the MS framework , MS bolts , inserts,
etc to required line ,level and position & cleaning the pockets & surface using water to Cum 0.25 68,000 17,000.00
make it free from dirt and dust ,pouring the ready mixed grout in the locations as per
manufacturers detail specifications including curing at all levels and locations etc.,
complete all as directed.

5.C Removing of Existing P.C.C /RCC including disposing out debris as directed by Engineer
incharge
Cum 5 4,000 20,000.00
7 FALSE CEILING WORK 0
False Ceiling - Providing and Fixing Armstrong or approved equivalent ceiling in
600x600x15 mm silhouette suspension system (white) with acoustic mineral fibre board
perforated in true horizontal level suspended on inter locking metal grid of hot dipped
galvanized steel sections (galvanizing @ 120 grams per M2 including both side)
consisting of main 'T' runner suitably spaced at joints to get required length and of size 24
X 38mm made from 0.33 mm thick (minimum) sheet, spaced 1200mm centre to centre,
and cross "T" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long
spaced between main 'T' at 600mm centre to centre to foMeter a grid of 1200 X 600mm
and secondary cross 'T' of length 600mm and size 24 X 28mm made of 0.33mm thick
(Minimum) sheet to be inter locked at middle of the 1200 X 600mm panel to from grid of
size 600 X 600mm, resting on periphery walls/ partitions on a Perimeter wall angle
deprecated steel of size of 24X 24X 3000 mm made of 0.40 mm thick (minimum) sheet Sqm 1980 2,150 4,257,000.00
with the help of raw plugs at 450mm centre to centre with 25mm long dry wall screws @
230mm interval and laying 18mm thick sheets of mineral fiber Dune max in the grid
including, cutting/ making opening for services like diffuser, grills, light fittings, fixtures,
smoke detectors etc., wherever required, Main 'T' runners to be suspended from ceiling
using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5 mm dia and 50mm
long dash fasteners. Incuding drop as per requirement.

0
 8 FLOORING WORKS 0
8.01 Providing and laying 1st quality Vitrified / Ceramic tile flooring of 10mm thickness,
conforming to IS:15622 of approved make, color and uniform shade of size , with water
absorption less than 0.08%, to required slope, set on 40mm thick cement mortar 1:4,
including fixing of tiles with cement slurry at 4.4kg/sqm and pointing the tile joints with
approved quality and colour pigmented cement to match the shade of tiles, oxalic acid
washing, , giving necessary slopes, etc., The rate shall include for cost of providing and
laying patterns, borders, inlays, cost of materials, wastages, labour, tools & plants, loading Sqm 255 1,950 497,250.00
and unloading charges, transportation, curing, protection of finished surface curing,
cleaning the area with water or water with mild acid, all other incidental charges, etc.,
complete with all leads and lifts as per specifications and drawings at all levels and as
per the instructions of Engineer in Charge.

0
8.02 Providing and laying 1st quality Anti-skid Vitrified / Ceramic tile flooring of 10mm
thickness, conforming to IS:15622 of approved make, color and uniform shade of size
600mm x 600mm , with water absorption less than 0.08%, to required slope, set on
40mm thick cement mortar 1:4, including fixing of tiles with cement slurry at 4.4kg/sqm
and pointing the tile joints with approved quality and colour pigmented cement to match
the shade of tiles, oxalic acid washing, , giving necessary slopes, etc., The rate shall
include for cost of providing and laying patterns, borders, inlays, cost of materials,
Sqm 45 1,850 83,250.00
wastages, labour, tools & plants, loading and unloading charges, transportation, curing,
protection of finished surface curing, cleaning the area with water or water with mild acid,
all other incidental charges, etc., complete with all leads and lifts as per specifications
and drawings at all levels and as per the instructions of Engineer in Charge.

0
8.03 Providing and fixing with 5 mm to 6 mm thick Glazed Ceramic Tiles of Size 300 x 450
mm of approved shade with border tile and make over and including 12 mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.30 Kg / Sqm 150 1,250 187,500.00
Sqm including pointing in white cement mixed with matching pigment in Dado etc., all
complete

0
8.04 PU FLOORING WORKS 0
Floor Treatment on Concrete surface - 6mm Thick -
Preparing & Cleaning the existing RCC Floor Surface by Diamond Grinding so as to
obtain a sound Surface. Preparation inludes groove cutting , scarification with scarifier and
cleaning the surface with Industrial vaccum to avoid dust accumulation in the room.
Applying High Build Solvent less Primer, on curing laying 2mm thick Stonclad GS / Pidilite
scratch coat, followed by Grinding and further topping with 3mm coat of High Build 100% sqm 1680 3,500 5,880,000.00
SolidS Stonkote HT4 / Pidilite final coat to provide non porous surface for better Abrasion
Resistance of approved shade . And the remaining 500 microns ( 0.5 mm) roller coat to be
done after positioning the machines to give proper finish. Colour code will be given by
client.

0
9 WATER-PROOFING WORK 0
9.01 Providing and laying Waterproofing for the Lift Pit,Surface preparation : Preparing the
surface to remove all loose matter, minor repair, honeycombed area and treat construction
joints with non-shrink fibre reinforced mortar with MasterBrace S 348. even out all
unevenness such as blowholes, pin holes and other surface defects with MasterBrace
ADH 2200.
Waterproof coating: Providing mixing and applying MasterSeal
551-IN of make MBS or equivavlent, a two component acrylic reinforced cementitious
waterproof coating, is supplied in premeasured units and should be mixed on site utilising
clean containers. Slowly add the powder to the liquid and mix, using a slow speed
(300rpm) drill fitted with a suitable paddle and applied on the prepared surface in two
coats at an interval of 4 to 8 hours between coats, depending on the climatic conditions,
applied at a total consumption of 3.6 kg / m² at 2 mm thickness(1.8kg/sq.m/mm) and
allowed to cure. The second coat shall be sprinkled / Broadcast with sand while in tacky
state to provide bond, all complete as per the instruction of manufacturer and as directed
by the engineer incharge.

Waterproofing shall have following performance property

Elongation upto 40% (28 days curing)
Water penetration resistance @ 5 Bar as per DIN 1048 - NIL, all complete as per the
instruction of manufacturer and as directed by the engineer incharge.

Over the Waterproofing layer i.e Masterseal 551-IN 0

Protective Plaster: Providing and laying protective plaster witht cement mortar of ratio 1:4
mixed with integral waterproofing additive MasterPel 777 of make MBS at a dosage of
100ml per bag of cement and shall be applied for a thickness of 15mm, on the waterproof
coating on the floor and the wall etc., to provide protection to the coating system and
cured as per standard practice Sqm 25 1,800 45,000.00
Note: Rate quoted is for items a to d but required cement and sand have to be supplied
free of cost at site.

0
10 STRUCTURAL STEEL WORKS 0
10.01 Supplying, fabricating, hoisting and erecting in position Mild steel structural steel works
(Make : Jindal / TATA) (for items mentioned below) at all elevations, levels and heights
including aligning, leveling, providing and fixing (Approved- TVS /Enbrako) HT bolts, nuts,
washers, comprising MS angles, channels, joists, rails, tees, plates, rounds, squares, etc.,
of 250 /310 Mpa Yield strength of various sizes and other structural steel sections
conforming to latest IS CODE Grade - A & B including straightening, cutting, welding
(6013-ESAB, ADORE ) bending to shape, bolting, cleaning the rust and scales to the
Mtn 58 125,000 7,250,000.00
satisfaction of Architect and inclusive of following finishes. Applying two coats of Synthetic
Enamel paint over two coats of Zinc Chromate primer of approved make and colour
before erection only touchup paint wherever needed to be done after erection . The rate to
include the cost of all materials, labours, tools, tackles, cranes, devices and plants as per
specifications and drawing complete.

11 PIR PARTITION WORK 0

11.01 Supply, errection and testing of wall panels 100 mm thick made up of two pre coated
galvanised steel of min 0.8mm thick, fastened to profiles placed in a particle tight frame
with caulking silicone sealing / or by a corona treatment filled with fire retardant
polyisocyanurate (PIR) / IPN material having density up to 40+2 Kg/m3 and height 10' 0"
(3050mm) as per the specifications complete (approved by FM Global/LPCB) with epoxy
polyester coated having minimum paint thickness of 60 microns, bottom floor track and top
runner, anchor fastener, screws, white PVC gaskets etc including all coving required
between floor and wall panelling,wall to wall panelling,wall to ceiling and also corner joints
as 100X100 mm minimum deemed fit for the application all inclusive without any extra Sqm 1130 4,500 5,085,000.00
items to complete the system. Make: Kingspan/ Lloyds / Thyssenkrup or Equivalent
Note: In case of cutouts, the flashing to be done to ensure fire resistance continuity. The
contractor to submit proof from FM/ LPCB for complying with minimum 120 mins fire
rating.

12 PUFF PANEL WORK 0

Supplying and fixing of Sandwich panel 100mm thick With end Cap covering for
0
both ends
TOP SHEET
Profile -TR Trapezoidal profiled sheet.
Thickness -0.5 mm TCT
Base metal -300 MPA GI/GL Steel with 150 GSM Zn/AL-Zn coating
Coating -DFT 20 microns colour coated SMP coating over 5 micron primer.
BOTTOM SHEET
Profile -Plain sheet with slight ribs
Thickness - 0.5 mm TCT
Basemetal -300 MPA GI/GL Steel with 150 GSM Zn/AL-Zn coating
Coating - DFT 20 microns colour coated SMP coating over 5 micron primer.
INSULATION
CFC & HCFC FREE RIGID POLYURETHANE (PUF) FOAM.
Panel Thickness = 100 mm
Foam Thermal Condutivity (K-Value) At
10°C mean Temp. = 0.023 W/m°k
Compressive Strength = 4.35 Kg/sq.cm.
Closed Cell Contents = 90 % - Min.
Horizontal Burning Characteristics = 125mm – Max., Fire Retardent, Self extinguishing
Quality Foam.
Fire Properties - As per DIN 4102 = B3
Water absorption = 0.2 % volume at 100% RH. – Max.
Vapour permeability = 0.24 ng/pasm at 88% RH & 38 deg.C – Max.
Dimensional Stability at
+70°C Temp. = ± 2%
Dimensional Stability at
-25°C Temp. = ± 2%
The Quoted rate should inclusive of single/double scaffolding with safety net
below the working area to suit the safety working condition at site Sqm 385 5,500 2,117,500.00
 13 FURNITURE WORK 0
13.01 L Shape Workstation
Supply and installation of L Shape frame Workstation of size 1560 L*1560
W*660 D*750mm HT with 60mm thick frames and frame height is 1200mm.
Frame made by aluminium with metallic powder coating, aluminium top trim with
PVC End caps with pinup and marker board and grommet hole and raceway for Each 24 28,000 672,000.00
wire manager. table top & gable end is made by 25mm thk Prelaminated particle
board with 2mm PVC Edge banding on all exposed areas

13.02 Pedestal
Suppplying of 3 Drawer mobile pedestal: Material 18mm thick Prelaminated
particle board with 2mm PVC Edge banding on all exposed ares, with handles,
centralised lock, bottom mounting slides for drawer and 4 nos of heavy duty Each 24 8,000 192,000.00
castors. Size : 400 x 450 x 650 ht.

13.03 Executive chair without HEAD REST

Medium back Executive chair without HEAD REST, tilting mechanism with
Multiple locking systems, ABS for seat, Mesh back with extra lumber Support with
adjustable armrest & gas lift for height adjustment, 5 prong base with nylon Each 32 12,500 400,000.00
castors. without headrest

13.04 Conference Table

Supplying and installation of Conference Table Top of size 5250*1500*750 mm &
25mm thk Prelaminated particle board with 2mm PVC Edge banding on all
exposed ares with 50*50 MS powdercoated leg with cross members and 4 nos of Each 1 55,000 55,000.00
aluminium flip up box for wire manager, metal cable raiser

13.05 Executive chair with HEAD REST

Medium back Executive chair with HEAD REST, tilting mechanism with Multiple
locking systems, ABS for seat, Mesh back with extra lumber Support with
adjustable armrest & gas lift for height adjustment, 5 prong base with nylon Each 15 15,000 225,000.00
castors. with headrest

13.06 Meeting room table

Supplying and installation of 4 pax circular meeting table of size 1200mm dia
and 750mm height, table top is made of 25mm thk Prelaminated particle board
with 2mm PVC Edge banding on all exposed ares with 50*50 MS powdercoated Each 2 30,000 60,000.00
leg with 50*25 cross members and 1 nos of aluminium flip up box and for wire
manager, metal cable raiser

14 MISCELLANEOUS WORK

14.1 HMPS DOORS 0.00 0.00

Providing & fixing Hollow Metal Pressed Steel Door (HMPS) of approved 0.00 0.00
equivalent
i.Single confirming
shutter withoutto IS- 277
vision paneland
withassize
per1200mm
standards highlighted below along
x 2400mm Sqm 50.00 15,920.00 796,000.00
with its accessories :-
0.00
ii.Double shutter without vision panel with size 2000mm x 2400mm Sqm 30.00 17,985.00 539,550.00

14.2 Providing and fixing of dock leveler HLS2 of 15T UDL (Uniformly distributed Each 1.00 600,000.00 600,000.00
load), as
Dock per EN:Dynamic load shall be 6T. Platform surface (S-235) of the dock
leveller 0.00 0.00
leveler shall
Operator & be minimum
Motor: 6mm
Electro-hydraulic operator with a Motor power 0.75 kW and 0.00 0.00
Connectingaccessories:
Standard voltage 3-phaseDock 400 V, pair
buffer 50 should
Hz. Protection category
be included IP 54.
to protect the Provide
leveller 0.00 0.00
Connecting
from theSteel
Finish: cable
hit of truck7.5 m
while
surfaces long.
backin2The
blasted control
coat, unit shall
PU-coated beofplaced
(layer 60 - 80next to the
micron) in dock
RAL 0.00 0.00
leveler-Ultramarine
5002 with membraneblue. push button integrated in housing. Press-andhold

14.3 Supply and installation of Hydro lift for G+1 stops - 250kgs /4 pax capacity Each 1.00 1,200,000.00 1,200,000.00

Total Amount in Rs. 31,380,950.00

GST 18% 5,648,571.00

GRAND TOTAL (Rs) 37,029,521.00

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

I INTERNAL AND EXTERNAL FIRE HYDRANT SYSTEM

ABOVE GROUND PIPING WORKS

Supply, erecting, jointing, testing and commissioning of MS heavy CLASS PIPE up to

150mm dia as per IS-1239 and IS- 3589 for pipes above 150mm. Rate quoted shall
include for necessary specials such as bends, Reducers, enlarges, tees, including
cutting the pipe to required length Welded joints etc. The pipe being fixed on to the
pedestal with required structural supports,U Clamps, nuts,bolts,washers,etc... The
quoted rate shall be include of fire sealing, core cutting and fixing to original statutes
complete with all other associated accessories including painting of the pipeline with
two coats of approved Zinc-rich epoxy coating over a coat of primer etc., complete.
1 The color coding of the pipes as specified in IS 2379:1990

250 NB Mtr 4,620.00 1,000.00 - -

200 NB Mtr 3,688.00 800.00 - -
150 NB Mtr 2,460.00 600.00 - -
100 NB Mtr 1,776.00 600.00 - -
80 NB Mtr 95 1,148.00 400.00 109,060.00 38,000.00
50 NB-for drain the ring main Mtr 770.00 200.00 - -

AEDBM Consultants Pvt. Ltd 7 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155

(PN 16) slim seal standard Gear valve type with required flanges, nuts, bolts etc. - -
complete. The quoted rate should be included with locking arrangement assembly.

200mm nominal dia(gear operated Type) Nos 67,000.00 2,000.00 - -

2
150mm nominal dia(gear operated Type) Nos 45,650.00 1,500.00 - -

100mm nominal dia(gear operated Type) Nos 18,500.00 1,000.00 - -

80mm nominal dia(gear operated Type) Nos 2 18,500.00 1,000.00 37,000.00 2,000.00

50mm nominal dia(gear operated Type) Nos 15,500.00 1,000.00 - -

Supplying, installing and commissioning of fire brigade inlet connection of 4 way

with 4 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling
3 type arranged on 150 mm dia. Pipe manifold and connected to External hydrant ring Nos 17,500.00 2,000.00 - -
main. Quoted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and
M.S. cabinet of suitable size with mounting supports etc. complete.

Supplying, installing and commissioning of Flushing pipe connection CI butterfly

valves with pipe up to 1.0m length connection,Valve as per BS 5155 (PN 16) slim seal
standard Gear valve type with required flanges, nuts, bolts etc. complete. The quoted - -
4 rate should be included with locking arrangement assembly.(For Flushing connection) &
connected associated works & accessories etc. Complete.
a) 50 mm dia valve with flushing pipe. Nos. 6500.00 2000.00 - -

Supplying, installing and commissioning of fire brigade inlet connection of 2 way

with 2 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling
type arranged on 100 mm dia(1-No for 2 Way FBIC, . Pipe manifold No for Draw
5 Nos 15,500.00 2,000.00 - -
out connection) and connected to wet riser main as well as to Fire water tank. Quoted
rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of
suitable size with mounting supports etc. complete.

AEDBM Consultants Pvt. Ltd 8 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Supplying and fixing approved make 25mm dia. automatic Pressure release valve ,
6 Nos 2,500.00 1,000.00 - -
unions & other associated works & accessories etc. complete.

Supplying, installing, testing and commissioning of yard hydrant comprising of the

- -
following,
Single headed hydrant valve as per IS 5290, made of SS metal with 63 mm dia
instantaneous out & 80 mm dia flanged inlet, Blank cap , chain and hand wheel etc. Nos. 7,200.00 800.00 - -
complete.
2 lengths of 15 M long, 63mm dia RRL hose with instantaneous couplings and Hoses
Set 16,640.00 800.00 - -
7 shall be stored in side the hose cabinet.
1 no. SS metal short branch pipe with nozzle. As specified in IS 903:1993 Nos. 4,000.00 500.00 - -
M.S. Hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg. with glass
fronted ( 4mm thick glass with rubber beading) door and size of the cabinet shall be
600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, Nos. 7,200.00 1,000.00 - -
all fasteners etc., and cabinet shall be powder coated of approved color both inside and
out side.
Supplying, erecting and commissioning of Internal /Landing Hydrants comprising of
- -
the following, As per IS 8844 : 1989
Single headed hydrant valve as per IS 5290, made of SS metal with 63 mm dia
instantaneous outletof 80 mm dia flanged inlet ,Blank caps , chain and hand wheels etc Nos. 1 7,200.00 500.00 7,200.00 500.00
complete.
2 lengths of 15 M long, 63mm dia RRL hose (Type-A)with instantaneous couplings and
Set 1 16,640.00 500.00 16,640.00 500.00
Hoses shall be stored in side the hose cabinet.As Specified in IS 884:1985
8 1 no. SS metal short branch pipe with nozzle. As specified in IS 903:1993 Nos. 1 4,000.00 500.00 4,000.00 500.00
Hose reel drum of swinging type with 19mm dia Rubber braided hose of 36.5M. length
Nos. 1 15,500.00 500.00 15,500.00 500.00
with Gate valve ( upstream) and Shut off nozzle With 25mmdia Ball valve, complete set.
M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swg. with glass
fronted ( 4mm thick glass with rubber beading) door and size of the cabinet shall be
600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, Nos. 1 7,200.00 500.00 7,200.00 500.00
all fasteners etc, and cabinet shall be powder coated of approved colour both inside and
out side.
Supply, fabrication and fixing of Pipe Supports in MS Box type, as per
drawings/instructions at site. Rate quoted shall include for supply and providing
9 necessary welding, cutting "U" clamps, bolts, horse shoe supports, nuts, washers as per KG 269 130.00 70.00 34,991.67 18,841.67
specified for completing the job and also giving a two coat of primer and two coats of
approved epoxy paint.
Supply testing and commissioning of CI NON Return Valve as specified in IS: 5312 for
- -
water application.
10 65 mm dia Nos 36,000.00 950.00 - -
80 mm dia Nos 48,000.00 1,250.00 - -
150mm dia-Wet riser Nos 58,000.00 1,500.00 - -

Supply, erection, testing & commissioning of electrical motor driven Booster gland
packing pump of Mono block type capable to deliver 450 LPM at 35mtrs
Head(1W+1S).The pump shall be coupled to TEFC motor of suitable HPand RPM and
complete set shall mounted on common base frame. The quoted rate shall includes
providing MS pipe heavy grade -interconnecting piping- suction from 5kl Fire tank to
11 outlet manifold with High & low Levelsensor 1 set, PN 16 Rating for matching flanges, Set 195,000.00 5,000.00 - -
Y'Strainer, NRV, suction & delivery side butterfly valves, pressure switch,pressure
guage ,outdoor type Controle panel locally remot controled,incoming , outgoing and
power Cabling,fromand to Panel to Booster pumps ,MCB,feeder,ON/OF control
switches,etc with associated works & accessories & ,The Size of pipes & Fittings as per
Pump GA Drawing .

Supplying fixinf testing and commissioning of Pressure switches assembly on header for
12 pressuring sencing, the cost shall be included with Approx 100mtrs length of cable for Nos 15,000.00 1,000.00 - -
making connection to Fire Panel.

1100 V GRADE POWER / CONTROL CABLES from panel to booster pumps - -

Supplying, laying, testing & commissioning of XLPE , steel armored, aluminum/ copper
conductor, 1100v grade power cables with terminations (including double compression
brass glands & copper lugs at both ends) etc. The cables shall be laid in tray / on walls/ - -
13 floor etc. as required. The rate shall excludes tray. The minimum size of the cables shall
as mentioned below, asper IS 7098 code
4C x 10 Sqmm.A2XYFY Cable Mtr 600.00 50.00 - -
12 C x 2.5 Sqm YWY Cable Mtr 500.00 50.00 - -
2 C x 2.5 Sqmm. No 140.00 50.00 - -
CABLE TRAY - -
Supplying and fixing of perforated G.I.sheet cable tray as per IS with necessary angle
iron suspension supports, anchor fasteners etc. complete. Maximum height of
- -
14 suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the
above mentioned cables.
300x50 mm wide with 2runs of 25x6 mm GI strip and tray cover . Mtr 3,000.00 150.00 - -
50x50 mm wide with 2runs of 25x3 mm GI strip and tray cover . Mtr 700.00 100.00 - -
Supplying and fixing approved make 25mm dia. automatic air release valve , unions &
15 Nos 0 3,500.00 100.00 - -
other associated works & accessories etc. complete.
G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from
the equipment to the nearest Earth pit with necessary accessories as required. ( Earth 300.00 100.00 - -
pit shall be executed by other agencies).
16
300mm long , 40x6 mm GI Flat on SMC/DMC insulator with M12 hole @ 50mm intervals
Mtr 300.00 100.00 - -
along with front acrylic cover protection .
1 Core x 16 Sqm YY Cable- green color . Mtr 400.00 100.00 - -

TOTAL (Without TAX) 231591.67 61341.67

II SPRINKLER SYSTEM
Supply, fixing and commissioning of installation control valve / Sprinkler Alarm Valve
consisting of :-
a) 1 No. alarm valve.
b) 2 No. main stop valve.
1
c) 1 No. water meter with alarm gong.
d) Pressure gauge drain valve and drain piping etc., as per specification.
1)200 mm dia set 90000 4000 - -
2)150 mm dia set 75000 3000 - -
ABOVE GROUND PIPING WORKS

Supply, erecting, jointing, testing and commissioning of MS heavy CLASS PIPE up to

150mm dia as per IS-1239 and IS- 3589 for pipes above 150mm. Rate quoted shall
include for necessary specials such as bends, Reducers, enlarges, tees, including
cutting the pipe to required length Welded joints etc. Rate quoted shall include for
supply and providing necessary supports with welding, cutting "U" clamps, bolts, horse
- -
shoe supports, nuts, Hangers,washers as per specified for completing the job. The
quoted rate shall be include of fire sealing, core cutting and fixing to original statutes
complete with all other associated accessories including painting of the pipeline with
two coats of approved Zinc-rich epoxy coating over a coat of primer etc., complete.
2 The color coding of the pipes as specified in IS 2379:1990

250 mm nominal dia (Header from Pump room To building ) Mtr 4620 1000 - -
250 mm nominal dia (Inside the Building) Mtr 4620 1000 - -
200 mm nominal dia (Inside the Building) Mtr 3688 800 - -
150 mm nominal dia (Inside the Building) Mtr 2460 600 - -
125 mm nominal dia (Inside the Building) Mtr 2068 500 - -
100 mm nominal dia (Inside the Building) Mtr 1776 400 - -
100 mm nominal dia (Outside the Building) Mtr 1776 400 - -
80 mm nominal dia (Inside the Building) Mtr 1148 300 - -

AEDBM Consultants Pvt. Ltd 9 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Excavating trenches of required width for pipes etc. in ordinary soil, hard/soft rock,
disintegrated rock which can be removed by wedging chiselling, controlled blasting for
pipes including excavation for sockets and dressing of sides, ramming of bottom depth
up to 1.0Mtr including getting out the excavated soil and then returning the soil as - -
required in layers not exceeding 20 cms in depth including consolidating each deposited
3 layer by ramming, watering, etc., and disposing of surplus excavated soil as directed
within a lead of 750 mtr (pipe dia. not exceeding 300mm).

a) Ordinary soil Cum 400 - -

b) Soft Rock Cum 900 - -
c) Hard Rock Cum 12000 - -
- -
SPRINKLER SYSTEM (Inisde the Building) - -

Supply, erecting, jointing, testing and commissioning of MS heavy CLASS PIPE up to

150mm dia as per IS-1239 and IS- 3589 for pipes above 150mm. Rate quoted shall
include for necessary specials such as bends, Reducers, enlarges, tees, including
cutting the pipe to required length Welded joints etc. Rate quoted shall include for
supply and providing necessary supports with welding, cutting "U" clamps, bolts,
- -
horse shoe supports, nuts, Hangers,washers as per specified for completing the
job. The quoted rate shall be include of fire sealing, core cutting and fixing to original
statutes complete with all other associated accessories including painting of the
pipeline with two coats of approved Zinc-rich epoxy coating over a coat of primer etc.,
4
complet.The color coding of the pipes as specified in IS 2379:1990

a) 20 mm dia. (for sprinkler connection with branch pipe) Mtr 220 100 - -
b) 25 mm dia. (+ Test pipe) Mtr 230 344 100 79,120.00 23,000.00
c) 32 mm dia. Mtr 75 444 150 33,300.00 11,250.00
d) 40 mm dia. Mtr 124 510 100 63,240.00 12,400.00
g) 50 mm dia.(+ drain pipe) Mtr 126 770 100 97,020.00 12,600.00
h) 65mm dia Mtr 45 920 100 41,400.00 4,500.00
i) 80mm dia Mtr 15 1148 100 17,220.00 1,500.00
i) 100mm dia Mtr 30 1776 400 53,280.00 12,000.00
i) 150mm dia Mtr 24 2460 600 59,040.00 14,400.00
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 (PN
16) slim seal standard Gear valve type with required flanges, nuts, bolts etc. complete. - -
The quoted rate should be included with locking arrangement assembly.
5 250 mm nominal dia (lever operated Type) Nos 67000 2000 - -
200 mm nominal dia (lever operated Type) Nos 36650 1500 - -
150 mm nominal dia ( Lever operated Type) Nos 16610 1000 - -
80 mm nominal dia(lever operated Type) Nos - -
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 (PN
16) slim seal standard Gear valve type with required flanges, nuts, bolts etc. complete. - -
The quoted rate should be included with locking arrangement assembly.
250mm nominal dia(gear operated Type) Nos. 92265 2500 - -
6 200mm Nominal Dia(gear operate Type) Nos. 77000 2000 - -
150 mm nominal dia (lever operated Type) Nos. 1 45650 1500 45,650.00 1,500.00
100 mm nominal dia (lever operated Type) Nos. 18500 1000 - -
80 mm nominal dia (lever operated Type) Nos. 1 16610 1000 16,610.00 1,000.00
65 mm nominal dia (lever operated Type) Nos. 1 14500 1000 14,500.00 1,000.00
Supply and fix ball valve(PN16) of approved make with screwed end(inspector test
- -
7 connection) & connected associated works & accessories etc. Complete.
a) 25 mm dia. Nos. 1 9500 1000 9,500.00 1,000.00
Supply and fix ball valve(PN16) of approved make with screwed end(For Flushing
- -
8 connection) & connected associated works & accessories etc. Complete.
a) 50 mm dia. Nos. 1 15000 1000 15,000.00 1,000.00
Supply, Installation, Testing & commissioning of Sprinklers with connected associated
- -
works & accessories etc., complete.
K-80, Temp-68 Deg.C, Standard Response Pendent Type Sprinkler Nos. 124 650 50 80,600.00 6,200.00
9
K-115, Temp-68 Deg.C, Standard Response Upright Type Sprinkler Nos. 950 50 - -
K-115, Temp-68 Deg.C, Standard Response Pendent Type Sprinkler Nos. 950 50 - -
K-320, Temp-68 Deg.C, ESFR Upright Type Sprinkler Nos. 3950 50 - -
Supply, Installation, Testing & commissioning of Sprinklers with connected associated
- -
works & accessories etc., complete. For Spare
K-80, Temp-68 Deg.C, Standard Response Pendent Type Sprinkler Nos. 10 650 50 6,500.00 500.00
10
K-115, Temp-68 Deg.C, Standard Response Upright Type Sprinkler Nos. 950 50 - -
K-115, Temp-68 Deg.C, Standard Response Pendent Type Sprinkler Nos. 950 50 - -
K-320, Temp-68 Deg.C, ESFR Upright Type Sprinkler Nos. 3950 50 - -
Supply, install, testing & commissioning of FM approved -SS Flexible sprinkler braided
. hose assembly of 1” NPT x 3/4” x 1,000 mm length, straight outlet, braided , seal, ms Nos. 2500 50 - -
supports bracket & connected associated works & accessories etc. Complete.
Supplying and fixing approved make 25mm dia. automatic Pressure release valve ,
13 Nos. 4500 1000 - -
unions & other associated works & accessories etc. complete.
Supply, fabrication and fixing of Pipe Supports in GI Box type., as per
drawings/instructions at site. Rate quoted shall include for supply and providing
14 necessary welding, cutting "U" clamps, bolts, horse shoe supports, nuts, washers as per Kgs. 2500 130 70 325,000.00 175,000.00
specified for completing the job and also giving a two coat of primer and two coats of
approved epoxy paint.
Supply , Install, testing and commissioning of flow switch on the sprinklers line of
15 approved type and make capable of sending impulses to annunciation panel. Cost shall Nos. 8000 1000 - -
be included with approx. 300mtrs length of cable to connecting the panel.
Supplying, installing, testing and commissioning of flexible braided pipe supports which
17 Nos. - -
are UL approved
Excavation width-1m & depth-1m,Providing, Laying. Testing & Commissioning NP2
class RCC hume pipes conforming to IS: 458 with suitable collars filling the recess at
joints of pipes with hemp dipped in hot bitumen or other suitable compound for caulking - -
18 of joint by jack, setting up of loose space over the collar joints chaulked with CM 1:2,
finished both ends to a slope of 1:1 including curing, testing of pipes, etc., complete.
450 mm dia-Deleted Rmt. 2200 750 - -
300 mm dia-Deleted Rmt. 1200 500 - -

TOTAL (Without TAX) 956,980.00 278,850.00

AEDBM Consultants Pvt. Ltd 10 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

III FIRE DETECTION AND ALARM SYSTEM

Supplying, installing, testing and commissioning approved make Microprocessor based

Multi-loop, True Peer-to-Peer Networkable CONVENTIONAL TYPE Fire Alarm Control
Panel with minimum 600 characters LCD display, 4000 trouble events including1000
alarm log history events,Panel shall be flame proof, QWERTY keypad for programming.
The panel should be equipped with sufficient numbers of loops considering 20% spare
capacity in each loop and shall be extendable upto 20 Loops. Each loop shall have a
capacity of minimum 150 detectors & 150 other devices exculding 20% spare. The
panel shall work in degrade mode in case of CPU failure, Products not having this
feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power
1 supply, automatic battery charger, 24 volts sealedm maintanance free batteries
sufficient for 24 hours normal working and 30 mins in alarm condition with the charging
capacity of suitable AH,Battery calclulation should be submitted by vendor. The panel
shall be capable of self programing without any dependancy on dongle or programming
software. Quoted rate shall include supply of necessary software & hardware for
progamming the panel with all necessary licence. Panel shall have Modbus over IP
protocol for future integration with BMS. However, for present arrangement FA system
will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the
cloud platform/solution. Designed to meet UL864, 10th Edition & FM approved
( NOTIFIRE MAKE)

2 loop (Expandable up to 5 Loop) Nos. 1 650000 5000 650,000.00 5,000.00

Supplying, installing, testing and commissioning of Manual Pull down type MCP with
module , made out of M.S.CRCA sheet, Powder coated finish of approved color, as per
2 manufacture specifications. The device shall have an LED which shall blink in normal Nos. 2 3,419.00 313.00 6,838.00 626.00
state & get steady on activation to monitor the heath status of the device. UL and FM
approved ( NOTIFIRE MAKE)

Supplying, installing, testing and commissioning Electronic Hooter cum strobe with
3 converter 230 AC to to 24V DC and dual tone type with control module and wiring Nos. 2 3294 313 6,588.00 626.00
circuit, with powder coated finish of approved color.( HONEY WELL MAKE)
Supplying, installing, testing and commissioning approved make Addressable
Multisensor (Smoke + Heat ) Detector. The detector shall have four sensing elements
4 viz. Photo electric smoke, Heat combined in a single detector. The detector shall have Nos. 174 2850 100 495,900.00 17,400.00
twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary
decimal switches with UL listed & & FM approved. ( NOTIFIRE MAKE) .
Supply, installing, testing & commissioning ofCONVENTIONAL TYPE Heat detector
rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing.
5 Addressing shall be with user friendly rotary decimal switches. UL and FM approved Nos. 2 2950 200 5,900.00 400.00
with Junction box and other associated works & accessories etc. Complete. ( NOTIFIRE
MAKE)
Supply, installing, testing & commissioning of CONVENTIONAL TYPE PROBE TYPE
OF Heat detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED
5a for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. UL Nos. 3,478.00 420.00 - -
and FM approved with Junction box and other associated works & accessories etc.
Complete. ( NOTIFIRE MAKE)

Supply, installing, testing & commissioning of CONVENTIONAL TYPE Smoke detector he

detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user
6 Nos. 7 2850 100 19,950.00 700.00
friendly rotary decimal switches. UL and FM approved with Junction box and other
associated works & accessories etc. Complete. ( NOTIFIRE MAKE)
Supply, installing, testing and commissioning of Response Indicator (as per IS 2189 :
7 2008) UL and FM approved with Junction box and other associated works & Nos. 4515 200 - -
accessories etc. Complete. ( NOTIFIRE MAKE)

Supply, installation, testing and commissioning of Fault Isolator Module .Isolator Base
can also be proposed, however in that case needs to be considered with each detector &
module. The device shall have an LED which shall blink in normal state & get steady on
8 Nos. 4945 200 - -
activation to monitor the heath status of the device. Module shall be supplied with
mounting plate from OEM for ease of installation & maintenance. Modukle should be
with UL and FM approved ( NOTIFIRE MAKE)
Supplying, installing, testing and commissioning approved make CONVENTIONAL TYPE
Loop Powered Autoaligned Beam Detector with reciver. The beam detector shall be
used for High Ceiling application with a detection range from 5 upto 100 mtrs and highly
resistant to building movement; tolerates +/- 1° movement, Resistant to solid object
9 Nos. 0 9373 1800 - -
intrusion, , Built-in imager heater, Resistant to strong light sources; does not alarm when
saturated by sunlight, Automatic sensitivity threshold level settings and drift
compensation. The detector shall be IP-55 compliant. UL Listed & FM approved. (HONEY
WELL MAKE)

Supply, Installation, Testing and Commissioning Hydrogen Detector shall includes a

highly sensitive and selective hydrogen sensor with a rapid response to low levels of
hydrogen in the ambient air. When hydrogen concentration levels are detected within
the Lower Flammability Limit (LFL), the system will produce audible and visual alarms to
10 prevent further exposure to hydrogen and all hydrogen related accidents. The 1 to 4.5 V Nos. - -
output signal, quantifying the hydrogen concentration in air, sensor is intended to be
providing input to safety system, HVAC, enabling audible alarms, HVAC system
shutdown, ventilation, or other measures to ensure safe handling and use of hydrogen
gas.(HONEYWELL MAKE)

Supply, Installation, Testing and Commissioning of 24V DC,3 AMPS SMPS for power
11 Nos. 7500 200 - -
supply to Devices.

Supply, Installation, Testing and Commissioning Control module with converter 230
AC to to 24V DC for activating the notification devices. Shall the supervisory facility
auxiliary power supply as well as the notification appliances circuit. The quoted rate
shall have the LED indication for normal working and active modes.The control module
12 shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED Nos. 4945 200 - -
which shall blink in normal state & get steady on activation to monitor the heath status
of the device. Addressing shall be with user friendly rotary decimal switches. Module
shall be supplied with mounting plate from OEM for ease of installation & maintenance.
UL and FM approved (NOTIFIRE MAKE)

Supply, Installation, Testing and Commissioning of Relay Module with converter 230 AC
to to 24V DC for AHU, Access Control, Lifts, Fire Suppression & other Third Party
Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall
13 have an LED which shall blink in normal state & get steady on activation to monitor the Nos. 4945 200 - -
heath status of the device. Addressing shall be with user friendly rotary decimal
switches. Module shall be supplied with mounting plate from OEM for ease of installation
& maintenance.UL and FM approved (NOTIFIRE MAKE)

Supply, Installation, Testing and Commissioning of addressable monitor module with

converter 230 AC to to 24V DC the field ON/NC devices shall have the binary dip
switch addressing settings with LED indication for normal and active modes.The monitor
module shall monitor potential free contacts. The device shall have an LED which shall
14 Nos. 4945 200 - -
blink in normal state & get steady on activation to monitor the heath status of the
device. Addressing shall be with user friendly rotary decimal switches. Module shall be
supplied with mounting plate from OEM for ease of installation & maintenance. UL and
FM approved (NOTIFIRE MAKE)

AEDBM Consultants Pvt. Ltd 11 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Supplying, laying, testing and commissioning of communication loop cable 2CX 1.5
15 Rmt 1800 80 20 144,000.00 36,000.00
sq.mm copper armored cable with PVC insulated Cable shall be as per IS : 1554.
Supplying, laying, testing and commissioning of loop cable 3CX 1.5 sq.mm copper
16 armoured cable. Cable shall be as per IS : 1554. for Power supply for Hoter, Beam Rmt 600 80 20 48,000.00 12,000.00
detectors, manul call points, Siren etc
Supply, Installation, Testing and Commissioning of 2.5 Km range Siren with Weather
proof motor with 220V 50HZ AC Supply operation with required power contractor, MPCB
17 Nos. 6500 500 - -
for control all in a weather proof enclosure near motor including all installation materials
as required.
Supplying, laying, testing and commissioning of power cable for .2 runs of 1.5 sq.mm
18 cross section PVC insulated copper armoured cable, cable shall be as per IS : 1554. FOR Rmt 600 80 20 48,000.00 12,000.00
HOOTER laying, testing and commissioning of power cable for Hooter 3 runs of 2.5
Supplying,
19 sq.mm cross section PVC insulated copper armoured cable, cable shall be as per IS : Rmt 170 60 - -
1554. for Siren
Supplying, laying, testing and commissioning of communication cable 2CX 1.5 sq.mm
19A copper armored cable with PVC insulated Cable shall be as per IS : 1554. From FACP To Rmt 0 90 60 - -
RP
Supply and fixing of 16SWG SS conduit Inside the process area concealed/Surface in
20 wall/ceiling/above false ceiling including painting with 2 coats of Red color paint for - -
exposed part and all fixing accessories materials
a).32 mm dia, 16G SS conduit Rmt 320 60 - -
b).25 mm dia, 16G SS conduit Rmt 210 60 - -
c).20mm dia, 16G SS conduit Rmt - -
Supply and fixing of 16SWG GI conduit concealed/Surface in wall/ceiling/above false
21 ceiling including painting with 2 coats of Red color paint for exposed part and all fixing - -
accessories materials
a).32 mm dia, 16G GI conduit Rmt 80 320 60 25,600.00 4,800.00
b).25 mm dia, 16G GI conduit Rmt 210 60 - -
c).20mm dia, 16G GI conduit Rmt - -
Supply testing and commissioning of Linear Heat Sensing Cable with sensors which
consist of Effective monitoring at precise point of risk, Economical, reliable and durable
22 detection of temp Environmental -65oC to +88°C for cable tray As an integral part of a Nos. - -
fire protection system, Alarm line Digital cable may be used as a conventional detector
and operate by connecting to the fire alarm panel.
Repeater Control Panel ( RC ) - -

Supplying, installing, testing and commissioning approved make Network Repeater

Panel with minimum 10" Color Touch Screen display/ QWERTY Keypad, mapping
minimum 2,00,000 points on network. The NRP shall act as an independent node
23 Nos. 306560 2000 - -
communicating on the peer to peer network and shall not be dependant on the Fire
Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP
operation.UL Listed & FM approved. ( Location at the Corridor) ( NOTIFIRE MAKE)

PUBLIC ADDRESS SYSTEM

SITC of EN54-16 compliant IP Based Digital Public Address & Voice Alarm system. The
selected system devices like controllers and Paging Microphones, should use the
- -
TCP/IP technologies and build on the standard network platform to ensure
expandability. System shell be modular to avoid single point of failuar.
SITC of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-
19 20KHz with a dispersion angle of 160 deg. The speaker should have tappings at Nos 30 740.00 250.00 22,200.00 7,500.00
6W/3W(Make: Honeywell)
SITC of 6W Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-
20 20KHz. The speaker shoud have tappings at 6W/3W(Make: Honeywell) Nos 8 1,129.00 313.00 9,032.00 2,504.00

Supply, Installation, Testing and Commissioning of Fire panel supervised 78db-90db

21 cieling Speakers as specified & same make as of panel. Speakers shall be 10 Watt with Nos 4,140.00 500.00 - -
multi taps of 10W with necessary fittings and accessories.(Make: Honeywell)
SITC of 15W Horn Speaker (IP66) with max SPL1M/1W 110dB . Frequency response of
22 500Hz-5KHz with a dispersion angle of 140 deg. The speaker shoud have tappings at Nos 4,956.00 688.00 - -
15W/7.5W(Make: Honeywell)
SITC of unidirectional 20W Sound Projector (IP55) with max SPL1M/1W 106dB .
23 Frequency response of 150Hz-15KHz. The speaker shoud have tappings at 20/10/5W . Nos 13,801.00 1,500.00 - -
(Make: Honeywell)

DIGITAL VOICE ALARM CONTROLLER:

Supply, installing, testing and commissioning of 8 zone, 8 channel IP based, Digital
Voice Alarm Controller with Rack Mounted expandable upto 128 zones. The voice
alarm controller should be able to connect directly over Ethernet. It should have
functions like the audio playing, zone control, fault monitoring, log recording, volume
control and amplifier switchover. The Voice alarm controller should also have the
following functions.The cost should include cost for back up battery supply for the whole
system for at evacuation mode minimum 12hrs.
24 Nos 296,000.00 6,000.00 - -
. 8X500W Amplifier Channels + 2 additional back up Amplifier channels for N:1
redundancy
. Time schedule broadcasts
. Capable of amplifier redundancy
. 4 trigger inputs/outputs.

(Note: master slave/Master router controller concept not accepted to avoid single point
failure). No of controller to be quoted as per BOQ.

PAGING STATION
SITC of IP based 7 inch Networkable touch screen paging station for selection of zones,
supervision of system status, setting of scheduled broadcasts with the following
functions
25 Nos 1 135,865.00 10,000.00 135,865.00 10,000.00
Built-in monitoring loudspeaker
Detachable goose-neck microphone
LCD touchscreen display
Upto 2000 zones

SITC of integrated Audio source with the following features :

• Two single USB\SD and DAB\FM line outputs can play music applications in two areas.
• The volumes of the two line outputs can be adjusted separately.
26 Nos 23,210.00 1,875.00 - -
• USB\SD has three play modes: single play, all play and repeated play.
• DAB\FM can preset 10 channels of programs.
• RS485 remote control interface

DIGITAL AMPLIFIERS
SITC of 1X500W Class-D Amplifier with 2 speaker circuits with 1 channel and can provide
27 automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage Nos 1 75,000.00 3,125.00 75,000.00 3,125.00
and DC protection and High Efficiency Class D Power Amplifier, 2x500W, 100V/70
Output, with 100 - 240 VAC input and 24 VDC backup power Supply

Supply, laying, Testing and Commissioning 2C x 1.5 mm2, Stranded Copper conductor,
Type A ST1 PVC insulated,Armoured FRLS Cable 650 V as per IS 1554, with GI saddle
28 Rmt. 700 80.00 42.00 56,000.00 29,400.00
spacers every 0.3 mtr with Single compression Cable Glands, ABS Junction Boxes
(wherever required), terminals, Ferruling complete. (Make: Honeywell)
Supply, Installation, Testing and Commissioning of Volume controller for one speaker
29 Nos 1 2,760.00 188.00 2,760.00 188.00
(inside the BMS room & other specified areas)(Make: Honeywell)
Supply, installing, testing and commissioning of Rack Mounted DVD Player as per
30 Nos 1 12,546.00 625.00 12,546.00 625.00
specifications(Make: Honeywell)

AEDBM Consultants Pvt. Ltd 12 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Supply, Installation, Testing and Commissioning 2 mm thick CRCA Sheet Powder Coated
suitable size Rack to mount the above quantity DVD Player, Amplifiers, Controllers,
31 routers etc., Lot 60,221.00 3,000.00 - -
Rack shall be deep closed type with front glazed door with 6/13A horizontal power strip
(Make: Honeywell)

Supplying, installation, testing & commissioning talk back slave

station in surface/recess suitable for operation on simplex
32 mode complete with P.T.T. knob & speaker/microphone Nos 4 5,009.00 1,250.00 20,036.00 5,000.00
enclosed in a M.S.(16 SWG)/ ABS box with break glass in front
etc. complete as required.

Supplying, installation, testing & commissioning of TWO WAY TALK BACK PANEL wih
33 320 character/ Touch screen LCD display with inbuilt Nos 1 24,465.00 3,125.00 24,465.00 3,125.00
reset, acknowledge and silence switches complete as required.

TOTAL (Without TAX) 1808680.00 151019.00

IV FIRE EXTINGUISHERS

Supplying, installing and commissioning Portable Fire extinguishers of following type &
capacity.
i).ABC powder stored pressure type fire extinguisher of 4.0 Kgs. Capacity, with initial
filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high
pressure CO2 gas cartridge, discharge hose. quoted rate included pressure gauge, Shadow Nos. 6 2800 100 16,800.00 600.00
board, Sinage of the extinguisher,wall/coloum mounting bracket, floor stand etc complete,
confirming to As per IS 2190-2010.

ii).ABC powder stored pressure type fire extinguisher of 6.0 Kgs. Capacity, with
initial filling in brand new cylinder with powder coated finish, fitted with Gun metal
union, high pressure CO2 gas cartridge, discharge hose. quoted rate included pressure Nos. 16 4000 100 64,000.00 1,600.00
gauge, Shadow board, Sinage of the extinguisher,wall/coloum mounting bracket, floor
stand etc complete, confirming to As per IS 2190-2010.

iii). Dry powder extinguisher stored pressure type fire extinguisher of 6.0 Kgs.
Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with
Gun metal union, high pressure CO2 gas cartridge, discharge hose. quoted rate Nos. 2 4000 100 8,000.00 200.00
included pressure gauge, Shadow board, Sinage of the extinguisher,wall/coloum
mounting bracket, floor stand etc complete, confirming to As per IS 2190-2010.
Supply and install in position approved make 5KG CO2 TYPE Fire Extinguisher , fitted
with discharge control valve( Sq. Grip type ) CE marked and pressure gauge, with
discharge hose and open nozzle and supplied complete with initial charge as peas per IS
1 Nos. 0 9500 100 - -
2190-2010. quoted rate included pressure gauge, Shadow board, Sinage of the
extinguisher,wall/coloum mounting bracket, floor stand etc complete, confirming to As
per IS 2190-2010.
v)Supply and install in position approved make Water Stored pressure type Fire
Extinguisher of 9lit capacity, fitted with discharge control valve( Sq. Grip type ) CE
marked and pressure gauge, with discharge hose and open nozzle.quoted rate included Nos. 9500 100 - -
pressure gauge, Shadow board, Sinage of the extinguisher,wall/coloum mounting
bracket, floor stand etc complete, confirming to As per IS 2190-2010.

vi).Supply and install in position approved make Foam stored pressure type Fire
Extinguisher of 6lit capacity, fitted with discharge control valve (squeeze grip type),
inside co2 gas cartridge of 60gms as per IS: 4947 with ISI mark and AFFF liquid of 540
ml as per IS: 4989 with ISI mark, with discharge hose and air induction nozzle and Nos. 2 4500 100 9,000.00 200.00
supplied complete with initial charge As per IS 2190-20103.quoted rate included
pressure gauge, Shadow board, Sinage of the extinguisher,wall/coloum mounting
bracket, floor stand etc complete, confirming to As per IS 2190-2010.

vii).Fire buckets 9ltrs capacity each round bottom type enamel painted, white inside
& Red out side and Letter "FIRE"in black out side and handle with mounting bracket, Nos. 0 200 100 - -
with shadow board and shelter
ix).Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets. set 3 3500 100 10,500.00 300.00

TOTAL (Without TAX) 108,300.00 2,900.00

AEDBM Consultants Pvt. Ltd 13 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

IV SIGNAGES

Providing and installing in position the following type of sign boards made out of 3mm thick
"Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle
painted foam board, complete with mirror fasteners.
a).Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED
OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board
1 Nos 2 600 20 1,200.00 40.00
shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near
Manual call points.
b).Floor identification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure
on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with Nos 2 600 20 1,200.00 40.00
contrasting colour from back ground. Size shall be 15cm x 60cm.
Providing and fixing in position the signages "FIRE ORDER" it should contain the following
matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective - -
self adhesive vinyle painted foam board of 3' x 4'.
a) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL
- -
POINT LOCATED AT STRATEGIC LOCATIONS.
2 b) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND EMERGENCY EXITS
- -
ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POITS.
c) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE Lot
2 1500 20 3,000.00 40.00
EXTINGUISHER OR WATER FROM NEAREST WET RISER.
d) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN. - -
e) IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, FLAT AND TRY TO ATTRACT
- -
ATTENTION OF RESCUE TEAM.
ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH
- -
FIRE ALARM OR FIRE DETECTORS SYSTEM.
a) ALERT THE OCCUPANTS BY USING FIRE ALARM SYSTEM. - -
b) INFORM FIRE CONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS: 101
- -
/ ----- /----- / ------.
3 c) REFER EVACUATION PLAN FROM EVACUATING STANDARD PEOPLE. Lot 2 1500 20 3,000.00 40.00
d) GUIDE THE FIRE FORCE, ON THEIR ARRIVAL TO THE SEAT OF FIRE. - -
e) IN CASE OF THE CASUALTIES, CALL AMBULANCE BY DIALLING NUMBER…….. - -
f) FIRE FIGHTING AGNECY ------------------------------- - -
g) PHONE : ----------------------- - -
h) FAX : ---------------------------- - -
Providing and fixing in position the Rectungular type sign Board - "ASSEMBLY POINT" of
4 3mm thick PVC/FRP board of computerised cut, PVC non-reflective self adhesive vinyle Nos 1 600 20 600.00 20.00
painted foam board of Standard Size.
Providing and fixing in position the Rectungular type sign Board INDICATION OF DIRECTION
5 BOARD of 3mm thick PVC/FRP board of computerised cut, PVC non-reflective self adhesive vinyle Nos 2 1200 20 2,400.00 40.00
painted foam board of Standard Size.
Providing and fixing in position the Rectungular type sign Board INDICATION OF FIRE
6 DOOR of 3mm thick PVC/FRP board of computerised cut, PVC non-reflective self adhesive Nos 2 600 20 1,200.00 40.00
vinyle painted foam board of Standard Size.
TOTAL (Without TAX) 12,600.00 260.00

V COMPRESSED AIR SYSTEM

Pipe System-Supply, loading-unloading, Installation, Testing, Commissioning of G.I

Pipes as per IS-1239 Part-1 Heavy Class plain end, Dimensional to ASME B36.10 with all
necessary heavy class socket weld fittings as per ASTM A105 such as tees, unions,
reducers, nuts, bolts, gaskets, nipples, expanders complete with adequate no. of
supports and U-clamps accessories. The pipes shall be fully welded and unions shall be
used only for valves, fittings and wherever it is essentially required. The scope also
includes colour coding as per Coca-Cola standard and direction of fluid flow & services
shall be indicated on the pipeline. For all welding joint should be painted inside &
outside.
Fitting Specification (Part of Above Piping System)
Elbow 900- G.I Elbows Socket Weld Type as per ANSI B16.11 standard for dimension
and ASTM A105 standard for Material.
Equal Tee - G.I Equal Tees Socket Weld Type as per ANSI B16.11 standard for
dimension and ASTM A105 for Material.
Reducing Tee -G.I ReducingTees Socket Weld Type as per ANSI B16.11 standard for
1
dimension and ASTM A105 for Material.
Concentric / Eccentric Reducer - G.I Reducer Socket Weld Type as per ANSI B16.11
standard for dimension and ASTM A105 for Material.
Nipple- GI pipe Nipple as per Material standard: IS 1239 Class C ERW & Dimension
Standard:ASME B36.19
Coupling - G.I Half Coupling onse side Socket Weld & incase of half coupling One end
threaded BSPT Type and other end shall be socket weld as per ANSI B16.11 standard
for dimension and ASTM A105 for Material.
NOTE : The quoted rate shall be include of fire sealing, core cutting and fixing to original
statutes, for the lines running above celling in packing filling and process area..etc.
Change of MOC will be flange joints. (GI to SS)
(Note: All linear lengths to be considered with butt welding only, without any fitting,
however wherever there is requirement of above mentioned fittings based on site
conditions, vender has to consider the quantity which is inclusive in piping system cost.
(Billing shall be on erection quantity only. Scrap should be taken back by contractor)

15 NB Rmt
20 NB Rmt
25 NB branch pipe at above false ceiling Rmt 160 344 100 55,040.00 16,000.00
26 NB branch pipe at below false ceiling Rmt 48 44 150 2,112.00 7,200.00
32 NB branch pipe at above false ceiling and compressor plant room piping Rmt 54 554 180 29,916.00 9,720.00
40 NB branch pipe at above false ceiling Rmt
50 NB Rmt
65 NB Rmt
100 NB Main Header from the Compressor Room Rmt
150 NB Rmt

Ball Valves -Ball Valves -Supply, Installation, Testing and Commissioning of Carbon
2 Steel full bore ball valves with Body ASTM A105 ,Trim ASTM A182 Gr.F304L, PTFE, Hand
Operated, Socket Weld Ends
15 NB Nos
25 NB Nos 6 5500 550 33,000.00 3,300.00
32 NB Nos 5 7500 550 37,500.00 2,750.00
40 NB Nos
Auto Drain Trap -Supply, Installation, Testing and Commissioning of Aluminum Body
3 Screwed Ends BSPT, internals hot dip galvanized with pair of nipples all complete for
installation and its function.
25 NB Rmt 5 5500 750 27,500.00 3,750.00
Filter Regulator -Supply, Installation, Testing and Commissioning of Aluminum Body
5 Screwed Ends BSPT, internals hot dip galvanized with pair of nipples all complete for
installation and its function.
25 NB Flow Rate : 25cum/hr @ 7.5bar Nos 6 5500 350 33,000.00 2,100.00
40 NB Flow Rate : 25cum/hr @ 10 bar Nos .
100 NB Flow Rate : 3500cum/hr @ 7 bar Nos

AEDBM Consultants Pvt. Ltd 14 OF 44 881970601.xlsx

 Document Title : SUMMARY - MECHANICAL PIPING WORKS Rev CA01 Remarks

Document No. : RFP-MECHANICAL PIPING-VSLC- M/s In Com Date 27.03.2025

BOQ FOR FIRE FIGHTING AND DETECTIONS WORKS

QUANTITY
BREAKUP
T0

UNIT RATE IN FIGURES

(Rs.)
SL. NO. DESCRIPTION Unit TOTAL (Rs.)
WH-04

SUPPLY ERECTION SUPPLY ERECTION

Air gun with spiral PU tube -Supply, Installation, Testing and Commissioning of air
6 gun with spiral PU tube (each expandable length 2 mtr) with Barrel Nipple which can be
suitably welded to pipe on one end and screwed to quick fix coupling on the other.
Ф8mm end connection with metal air gun Nos 3 1850 350 5,550.00 1,050.00
Pressure Gauges -Supply, Installation, Testing and Commissioning of Diaphragm Type
7 Pressure gauges (SS304). Pressure gauge shall be flanged type and having matching
flange, gasket & nut & bolt.
6 inch dial, 0-10 kg/cm2 Nos 11 4200 350 46,200.00 3,850.00
6 inch dial, 0-50 kg/cm2 (on header inlet side of the line for bottle busting) Nos
PU pipes -Supply, Installation, Testing and Commissioning of PU pipes with necessary
Quick Fix Coupling with an in-built check valve on the socket end and plug end feasible
8 to be connected to hose.
Barrel Nipple which can be suitably welded to pipe on one end and screwed to quick fix
coupling on the other.
Ф6mm x 30mtrs length including end connections to be fitted according to site
conditions.
Nos 6 2200 250 13,200.00 1,500.00
Ф8mm x 30mtrs length including end connections to be fitted according to site
Nos
conditions.
TOTAL (Without TAX) 283,018.00 51,220.00

AEDBM Consultants Pvt. Ltd 15 OF 44 881970601.xlsx

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

1.00 SECTION:1- INFRASTRUCTURE WORKS

1.0 Metering Cubical - UPGRADATION

UPGARADTION OF pole mounted CT's & PT's ratings as per TNEB
power sanction letter (at TNEB authorised fabricator) to the
requirement of TNEB. Calibrate atTNEB RT Division, erection, testing
& commissioning at site in the presence of TNEB RT Division
personnel. The quoted rate shall be inclusive of CTs, PTs, Bus Bars, 1 Each 100,000 100,000 10,000 10,000 AS PER TANGEDCO
etc., and shall also include all other accessories complete as required.
AS PER TNEB STATUTORY NORMS AND
REQUIREMENTS.Present Demand - 500KVA , Enhancment
Required - 700KVA .

2.0 NEW 11KV VCB PANEL-3MODULE Outdoor IP 54( EXTENSIBLE TYPE)

Supply ,unloading at site ,Store , shift to location , erecting, testing and commissioning
of 11 kV, 3Phase, 50 Hz, 500 MVA, 630A, SINGLE VCB Panel with multi
function meter, Outdoor type, totally enclosed free standing MS sheet clad cubicle type,
Isolation type, HT Panel of siemens grey or of approved color with 1no.630A,26.3KA
for 3Sec motorised VCB as incomer &2no.s 630A ,26.3KA for 3sec motorised VCB as
3MODULE VCB PANEL
outgoing ,630A TP PVC sleeved copper bus bars suitable to receive 11KV, 1RX 3C x
300 Sqmm XLPE(E) HT incoming cable and outgoing cable. The VCB Panel shall
1 Each 1,500,000 1,500,000 3,000 3,000 FOR I/C+O/G-1:
INGEN+O/G-2 INCOM
comply to the requirements of TANGEDCO . The tripping mechanism shall be suitable
for 110V DC source in built power pack with 30 min backup & 230V AC source for
spring charge & heater circuit from external supply . AS PER TANGEDCO
STATUTORY NORMS AND REQUIREMENTS.
( Tender Dwg : VSLC -WH4-SLD-401,T0).

RCC Foundaiton for above 3Module HT panel with Supersture hieght of 1mtr from
FGL /NGL .
1 Each 100,000 100,000 15,000 15,000

3.0 NEW 11KV VCB PANEL- 1 MODULE OUTDOOR IP 54( EXTENSIBLE TYPE)

Supply ,unloading at site ,Store , shift to location , erecting, testing and commissioning
of 11kV, 3Phase, 50 Hz, 500 MVA,1no. 630A,26.3KA for 3Sec Motorised VCB Panel
with demand controller/manager and power monitor as incomer and 1no. 630A,
26.3KA for 3Sec Motorised VCB Panel with multi function meter as Outgoing, indoor
type, totally enclosed free standing MS sheet clad cubicle type, Isolation type, HT Panel
of siemens grey or of approved color with 630A TP PVC sleeved copper bus bars and 1MODULE VCB PANEL
suitable to receive 11KV 1R X 3C x 300 Sqmm XLPE(E) HT as incomer and outgoing 1 Each 500,000 500,000 10,000 10,000 FOR TRAFO- INCOM
cable. The VCB Panel shall comply to the requirements of TANGEDCO . The tripping
mechanism shall be suitable for 110V DC source in built power pack with 30 min
backup & 230V AC source for spring charge & heater circuit from external supply .
AS PER TANGEDCO STATUTORY NORMS AND REQUIREMENTS.
( Tender Dwg : VSLC -WH4-SLD-401,T0).
A

RCC Foundaiton for above 1Module HT panel with Supersture hieght of 1mtr from
FGL /NGL .
1 Each 50,000 50,000 5,000 5,000

4.0 11KV H.T.CABLE / TERMINATION

Supply, receiving, unloading at site , store & laying of following sizes of
3-core, 11KV HT underground XLPE(Earthed) cable laid in existing
4.1.1 trench / excavated ground.

HT CABLE FROM
3-Core x 240 Sqmm 11KV(E) A2XFY XLPE FLAT ARMOURED METER YARD NEAR
2,000 Mtrs 1,500 3,000,000 200 400,000 MAIN GATE TO INCOM
Cable
A TRAFO YARD .

4.1.2 H.T.Cable Outdoor/Indoor end termination

Supply & termination of Raychem type end termination kit suitable for
the above XLPE cables.

3-Core x 240 Sqmm 11KV(E) A2XFY XLPE Cable HT CABLE END

A 6 Each 8,000 48,000 2,500 15,000 TERMINATION
termination(INDOOR)

3-Core x 240 Sqmm 11KV(E) A2XFY XLPE Cable STRAIGHT JOINT JOINT KIT FOR HT
B 4 Each 8,000 32,000 2,500 10,000 CABLE
KIT (OUTDOOR)

5.0 DISTRIBUTION TRANSFORMER

Supply ,unloading at site ,Store , shift to location , Erection, testing &

commissioning of 250 kVA, 11KV/433V, 500MVA, Dyn 11, Oil cooled
ONAN type outdoor mounting Copper wound Distribution Transformer
suitable for 40 deg oil and 45 deg winding temperature with On load tap
changer (OLTC) and Remote Tap Changer Control (RTCC) Panel,
Marshalling Box, Oil Temperature Indicator, Winding Temperature
Indicator, Buccholz Relay, Bidirectional rollers, Marshalling Box, cable
box with HT Disconnecting Chamber for 1RX 3C x 240 Sq.mm 11KV, 1 Each 675,000 675,000 30,000 30,000 DISTRIBUTION TRAFO
XLPE(E) Al. AR. Cable and LT Cable Chamber suitable for terminating
4Rx 3.5Cx 240sqmm A2XFY cable with all other accessories
completely as required. The tap off on the HT side shall be + 10% / -
15% in steps of 1.56%.
ADDITIONAL SCOPE - oil filteration works shall be carried out after
BDV testing and assessment . Any top up oil required shall be arranged
by Contractor on chargeble basis .
A

881970601.xlsx PAGE 16/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

RCC Foundaiton for above transformer with Supersture hieght of 1mtr from FGL
/NGL .
1 Each 100,000 100,000 20,000 20,000 .

6.0 EXTERNAL TRENCH AND HUME / GI PIPE

6.1 PIPES :
Supply and laying of pipes in existing excavated ground. Any collars and
bends and nipples etc as required shall be laid at a depth of 600 mm
below ground level or under paved areas/under floor as required.

A 100 mm dia Class 'B' GI pipe. 25 Mtr 1,000 25,000 100 2,500 HT CABLE PROTECT

B 300 mm outer dia Hume pipe NP2 class 50 Mtr 750 37,500 150 7,500 ROAD CROSS

C 150 mm outer dia Hume pipe. NP2 class 50 Mtr 350 17,500 100 5,000 ROAD CROSS

HT metalic cable Cast Iron Cable route marker with height atleast
300mm above ground level, angle/ GI pipe support and Concrete 50 Each 500 25,000 100 5,000 ROUTE MARKER
D foundation

6.2 Civil works for external cable laying

Preparation of outdoor cable trenches including excavation,back filling,
sand filling, cable tiles/bricks , compaction as per specification of the for
the following sizes.
HT CABLE EARTH
A Trench of width 1000mm & depth 1000mm. 1,500 Mtr 300 450,000 1,000 1,500,000 EXCAVATION

LT CABLE EARTH
B Trench of width 600 mm & depth 750mm. 50 Mtr 300 15,000 850 42,500 EXCAVATION

C Trench of width 300mm & depth 450mm. 50 Mtr 300 15,000 750 37,500 EARTH STRIP WORKS

Constructing Cable Inspection chamber with bricks of class designation

M35 in cement mortar 1:5 (1 cement: 5 coarse sand) 150mm thick base
leveling course with PCC 1:4:8 (1 cement:4 coarse sand:8 40mm graded
aggregate), RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4
graded stone aggregate 20mm nominal size) including reinforcement
steel, inside plastering 12mm thick with cement mortar 1:4 (1 cement: 4
coarse sand) finished with a coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate
20mm nominal size) finished with a floating coat of neat cement
complete including excavation in all types of soil including rock
complete all as per standard specification and as directed.
6.3
1000x1000x750mm max depth with heavy duty CI Cover plate with ROAD CROSS
10 EACH 25,000 250,000 2,500 25,000 CHAMBER
A handle for opening cover .

7 MISCELLANEOUS ITEMS :
SAFETY ITEM AS PER
A 4 Fire buckets of 9 Ltrs capacity with floor, stand, sand, painting, etc. 2 Each 5,000 10,000 500 1,000 CIEG

Rubber mats of 11KV grade 1.8 Mtrs x 0.9 Mtrs and of sufficient
thickness min 3mm & COLOUR as required by the Electrical SAFETY ITEM AS PER
5 Each 2,500 12,500 50 250 CIEG
Inspectorate and confirming to IS 15652. Electro mat with zone marking
B for safe operating distance .

Shock treatment chart with teak wood frame and glass cover as approved SAFETY ITEM AS PER
1 Each 1,000 1,000 100 100 CIEG
C by Electrical Inspectorate.

Electrical single line diagram A1 SHEET (As Built drawing/ SAFETY ITEM AS PER
1 Each 2,500 2,500 100 100 CIEG
D TANGEDCO APPROVED ) with teak wood frame and glass cover.

SAFETY ITEM AS PER

E First Aid Box with standard items 2 Set 500 1,000 100 200 CIEG

Danger boards mention voltage level in min three languages marked in SAFETY ITEM AS PER
6 Each 500 3,000 100 600 CIEG
red as per TNEB requirements. (In English, Hindi & Local Language)
F

SAFETY ITEM AS PER

G 11KV grade pair of rubber gloves and gumboots (With ISI mark) 2 Each 2,000 4,000 100 200 CIEG

7.1 Yard Fencing & Jelly Spreading

Providing 2500 mm high chain link fencing consisting of 50 x 50 x 6

mm MS angle, vertical support port 2500 mm high (spacing not
exceeding 3.0m), 50 x 50 x 6 mm MS angle 2800 mm long bracing
struts (in both directions) for every fifth post (and at change of
directions of the fence) and 10 gauge GI chain link mesh 50 x 50 mm
fully streached and secured to MS angle verticals and horizontals with
6mm dia MS bolts, nuts and washers spaced at 150 mm (min) using
A 25 x 5 mm MS flat cover strips, 170 mm long, bottom 75mm end of 150.00 Sqmt 1,700.00 255,000.00 400.00 60,000.00
MS verticals and bracing struts to be split and 400 mm embedded in
400 x 400 x 500 deep cement concrete 1:3:6 including necessary
welding and/or bolted connections of MS horizontals and
bracings/struts to vertical posts, excavation, cement concrete and
painting one coat of primer and two coats of synthetic enamel paint
to all exposed faces of steel work and chain link fencing. Measured
nett area of fencing between external faces of horizontal members.

providing one gate 2400 mm wide (min) in two (side hung) leaves to
B match the chain link fence including necessary hinges, locking 1.00 Each 9,000.00 9,000.00 1,500.00 1,500.00
arrangements, etc., complete.

providing one gate 1200 mm wide (min) in two (side hung) leaves to
C match the chain link fence including necessary hinges, locking 2.00 Each 6,000.00 12,000.00 1,000.00 2,000.00
arrangements, etc., complete.

881970601.xlsx PAGE 17/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

Supplying and spreading 40mm nominal size stone aggregate as

D 50.00 cum 1,200.00 60,000.00 150.00 7,500.00
directed (voids not considered for measurement)
CEIG SAFETY CERTIFICATE, CHARGING APPROVAL & EB
8 POWER SANCTION
Filing the completion report for the EB portion of work to the Electrical
Inspectorate authorities, getting the inspection done at site, filing the
compliance report, getting the approval from Electrical Inspectorate
CEIG SAFETY
authorities and getting the approval from EB for charging the line for the
1 LS 500,000 500,000 APPROVAL & POWER
EB portion of the work & Safety approval for main building works etc., SANCTION
including filling up of applications complete. POWER SANCTION IS
INCLUDED IN THE SCOPE . Contract demand Enhancment of 200
KVA shall be obtained.
.
9.00 AS BUILT DRAWINGS AND MANUALS
Submission of 3 sets of AS BUILT drawings duly prepared as per site
execution , approval from engineer in charge/ client / consultant , plotted
1 LS 10,000 10,000
on Colour A1 sheet & soft copies 2 sets in ACAD 2004 Version on PEN
DRIVE .

10.0 FIRE SEALANT

FFSC/20kg FIRE STOP COMPOUND

(Fire mortar)
Installation Steps including all material supply :
1. Drilling and fixing 8mm TMT rod
2. Applying anticorrosive coating to
the rods
2 SQM 10,000 20,000 18,000 36,000 WALL SEAL
3. Placing and fixing binding wire over
TMT rod
4. Placing micro mesh over the
binding wire
5. Applying FFSC mortar for 100mm
thickness in trowel grade

1.00 TOTAL FOR INFRASTRUCTURE WORKS 7,330,000 2,762,450

2.00 SECTION :2- POWER WORKS

1.0 MEDIUM VOLTAGE SWITCH BOARDS

Receiving ,unloading at site ,Store , shift to location , erection, testing
and commissioning of 415Volts, 3 phase 50 Hz
switchboards/panels/PDBs with ACB,MCCB, MCB units as per
specification titled "415 Volts switch Boards", as per schematic
1.1 drawing complete as required.

The supply & fixing of steel supporting channels, grip bolts and all other
accessories as required shall be measured under separatly under heading
steel items.
TECHNICAL NOTES :
A) The MV Switchboards shall be confirming to the relevant latest
Indian standards, the technical specs forming part of this tender
documents and the Key Schematic Diagram attached with this tender
document and the BOQ. Main LT Panel shall be of Form 4A and other
Sub Panels shall be of Form 3B type of construction.
B) Total discrimination study shall be done by swicthgear OEM and
report to be sumitted with breaker and relay settings.
C) All Digital meters shall be with comm port for connecting to EMS
system.
Contractor / Vendor should quote all Panels as per following
minimum features / reqirements & for other detail requirements
refer relevent specification:
1) The all ACB feeders should have pad lock arrangement at its
TEST and ISOLATED Position.
2) All ACB's should have hinged and lockable cover to prevent the
accidental operation mechanical ON push button on ACB.
3) After any door opening panel should maintain minimum IP-20
protection against any electrical live parts with "Danger 415 V"
symbol in english, hindi and local language. All the terminals should
have proper cover to make them finger touch proof.

4) All fornt cubicles and back side should have large "Danger 415 V
" signage board in Hindi, Engilish and local language. This Danger
signage should be in red backgorund and the font should be in white
text. This signage board should be permanently fixed (not sticker
type) and should be indelible. The signage board should be of

5) All the front doors should have lock and it should be opneable
with dedicated key. It should also not be possible to open the front
door when the ACB is Racked IN.
6) All MP releases of ACBs should have with display and rotary
switches for protection setting.
7) Earth fault protection should be 3 ph, 4 wire in all TPN ACB'S &
MCCB'S. The earth fault protection should include neutral also for
all TPN ACB'S & MCCB'S feeder with required suitable materials
and it should be suitable of minimum setting at 10% of rated current
of breaker.
8) Busbar spreaders are required for feeder 125A and above.
9) All feeders should have Rotary operating handle (ROH)
10) All MCCB feeders should have extended rotary handle to putting
pad locks for LOTO
11) All panel feeders should have with LOTO provision.

A MAIN LT PANEL OUTDOOR TYPE IP54 1 Each 650,000 650,000 40,000 40,000 CPRI TESTED
( Tender Dwg :VSLC -WH4-SLD-401,T0)

RCC Foundaiton for above MV PANEL with Supersture hieght of 1mtr from FGL
A,1
/NGL .
1 Each 100,000 100,000 25,000 25,000

B PRODCUTION BLOCK MRLP INDOOR TYPE IP43 1 Each 1,000,000 1,000,000 15,000 15,000 CPRI TESTED

881970601.xlsx PAGE 18/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT
( Tender Dwg :VSLC -WH4-SLD-401,T0)

63A,4P,MCCB ,TM BASED O/C,S/C 25KA IN POWDER CAOTED

MS ENCLOSURE WITH CONTROL MCB & RYB LAMPS. IP 43 1 Each 25,000 25,000 2,500 2,500 CPRI TESTED
C WALL MOUNT
( Tender Dwg :VSLC -WH4-SLD-401,T0)

2.0 FACTORY-BUILT MCB DISTRIBUTION BOARDS

Supply, store, erection, testing and commissioning of MCB Distribution
Boards, wall-mounted (either surface or recessed type)

The erection rates shall include fixing of DB on wall including supply of

all fixing accessories, civil works etc. Space provision shall be made for
mounting RCBO in the SUB incomer.

2.1 Vertical Type TPN MCCB DB's with Metal Door(Double Door)
12 Way VTPN MCCB DB with 1NO. 63A,4P MCCB Incomer and 12
no.s of 32A TP MCB's as outgoings. Scope includesMCCB & MCB
1 Each 35,000 35,000 5,000 5,000 M/C VTPN DB
supplies complete .
A ( Legrand or Approved Equivalent )

8 Way VTPN MCCB DB with 1NO. 63A,4P MCCB Incomer and 8 no.s
of 32A TP MCB's as outgoings.Scope includesMCCB & MCB supplies
1 Each 30,000 30,000 5,000 5,000 PDB-1
complete .
B ( Legrand or Approved Equivalent )

4 Way VTPN MCCB DB with 1NO. 63A,4P MCCB Incomer and 4 no.s
of 32A TP MCB's as outgoings. Scope includesMCCB & MCB supplies
1 Each 25,000 25,000 5,000 5,000 PDB-3 3PH
complete .
C ( Legrand or Approved Equivalent )

7 SEGEMENT PHASE SEGREGATED MCB DB's with Metal

2.2 Door(Double Door)

12 Way TPN MCB DB with 1NO. for 63A,4P MCB Incomer and 3NO.S
32A DP RCBO 30 mA RCBO as sub incomer and 36 no.s 10/16/20 SP
R.ONLY Each 25,000 0.00 5,000 0.00
MCB's as outgoings.Scope includes MCB supplies complete .
( Legrand or Approved Equivalent )
A

8 Way TPN MCB DB with 1NO. for 63A,4P MCB Incomer and 3NO.S
32A DP RCBO 30 mA RCBO as sub incomer and 24 no.s 10/16/20 SP
1 Each 20,000 20,000 4,000 4,000 UDB
MCB's as outgoings.Scope includes MCB supplies complete .
( Legrand or Approved Equivalent )
B

4 Way TPN MCB DB with 1NO. for 63A,4P MCB Incomer and 3NO.S
32A DP RCBO 30 mA RCBO as sub incomer and 12 no.s 10/16/20 SP
3 Each 15,000 45,000 3,000 9,000 PDB-2 ,ACDB,PDB-04
MCB's as outgoings.Scope includes MCB supplies complete .
( Legrand or Approved Equivalent )
C

Factory built Adaptor box suitable for 4/8/12-way VTPN MCCB

DB .The adoptor box shall be fabricated with 16 G sheet steel and
3 Each 2,019 6,057 450 1,350
painted with the same colour as that of the DB.
( Legrand or Approved Equivalent )
Q

Factory built Adaptor box suitable for 12-way 7SEGMENT MCB

DB .The adoptor box shall be fabricated with 16 G sheet steel and
1 Each 2,576 2,576 450 450
painted with the same colour as that of the DB.
( Legrand or Approved Equivalent )
R

Factory built Adaptor box suitable for 8-way 7SEGMENT MCB

DB .The adoptor box shall be fabricated with 16 G sheet steel and
1 Each 2,280 2,280 450 450
painted with the same colour as that of the DB.
( Legrand or Approved Equivalent )
S

Factory built Adaptor box suitable for 4-way 7SEGMENT MCB

DB .The adoptor box shall be fabricated with 16 G sheet steel and
3 Each 1,862 5,586 450 1,350
painted with the same colour as that of the DB.
( Legrand or Approved Equivalent )
T

2.5 MCB Enclosures

Supply, store, erection, testing and commissioning of MCB's in a powder
coated enclosure complete as required.
6-32 Amps DP MCB's in a suitable MS powder coated enclosure.
2 Each 500 1,000 150 300
A ( Legrand or Approved Equivalent )

40-63 Amps FP MCB in a suitable MS powder coated enclosure.

2 Each 850 1,700 300 600
B ( Legrand or Approved Equivalent )

2.6 Push Buttons

Supply, installation, testing & commissioning of the following types of

Mushroom type Push Button Stations in an MS powder coated enclosure
suitable for IP 55 degree of protection complete with internal wiring and
all other accessories as required complete with non degradable rubber
gasketting, etc., as per the specifications & drawings. The erection cost
shall include the supports, anchor fasteners for erecting the PB Station to
wall/clading/trusses/coloumns/etc., as required.
3.5.1
"EMERGENCY OFF" Mushroom head type Push Button Stations (Red
1 Each 2,500 2,500 500 500
A Colour) in Thermo plastic enclosure IP65 .

881970601.xlsx PAGE 19/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT
3.0 POWER AND CONTROL CABLES :

Supply, Laying and testing of 1.1KV Grade XLPE insulated, FRLS,PVC

sheathed Aluminium conductor steel armoured power cables as per the
specs. The rates quoted shall be for laying in trays, cable trenches (indoor
and outdoor), pipes, etc. For buried cables,the excavation work will be
included under the heading "Civil works for outdoor cable laying."As
per IS 7098 Part 2 Standard.Fire retardant paint shall be done for
cable upto 1mtrs on all panels above and wall crossing either sides .
3.10

A 3.5 Core x 300 Sqmm A2XFY Cable 250 Mtr 941 235,250 99 24,750

B 3.5 Core x 240 Sqmm A2XFY Cable R.ONLY Mtr 795 0.00 90 0.00

C 3.5 Core x 185 Sqmm A2XFY Cable R.ONLY Mtr 692 0.00 76 0.00

D 3.5 Core x 150 Sqmm A2XFY Cable R.ONLY Mtr 553 0.00 72 0.00

E 3.5 Core x 120 Sqmm A2XFY Cable R.ONLY Mtr 621 0.00 68 0.00

F 3.5 Core x 95 Sqmm A2XFY Cable R.ONLY Mtr 379 0.00 63 0.00

G 3.5 Core x 70 Sqmm A2XFY Cable 200 Mtr 297 59,400 54 10,800

H 3.5 Core x 50 Sqmm A2XFY Cable R.ONLY Mtr 226 0.00 45 0.00

I 3.5 Core x 35 Sqmm A2XFY Cable 250 Mtr 165 41,250 36 9,000

J 4 Core x 25 Sqmm A2XFY Cable 1,300 Mtr 159 206,700 32 41,600

K 4 Core x16 Sqmm A2XFY Cable 200 Mtr 112 22,400 29 5,800

L 4 Core x 10Sqmm A2XFY Cable 1,250 Mtr 77 96,250 27 33,750

Supply, Laying and testing of 1.1KV Grade , FRLS, PVC insulated,

PVC sheathed Copper conductor steel armoured/unarmoured power
cables as per the specs. The rates quoted shall be for laying in trays, cable
trenches (indoor and outdoor), pipes, etc. For buried cables, the
excavation work will be included under the heading "Civil works for
outdoor cable laying."As Per IS 1554 Standard YWY / AS PER IS 694
YY ..Fire retardant paint shall be done for cable upto 1mtrs on all
panels above and wall crossing either sides .
3.20

CONTROL CABLES
A 4Core x 10 Sqmm YFY Cable 100 Mtr 94 9,400 18 1,800

B 4Core x 4Sqmm YFY Cable 500 Mtr 140 70,000 22 11,000

C 3 Core x 4 Sqmm YWY Cable. 300 Mtr 157 47,100 23 6,900

D 3 Core x 2.5 Sqmm YFY Cable 1,000 Mtr 101 101,000 22 22,000

E 3 Core x 1.5 Sqmm YFY Cable 1,300 Mtr 77 100,100 18 23,400

F 3 Core x 1.5 Sqmm YY Cable 200 Mtr 713 142,600 54 10,800

G 19 Core x 2.5 Sqmm YFY Cable 25 Mtr 569 14,225 45 1,125

I 7Core x 2.5 Sqmm YFY Cable 25 Mtr 217 5,425 27 675

4.00 CABLE END TERMINATIONS :

Supply and providing the end terminations with Aluminium cable lugs,
Double compression brass cable glands, taping, crimping, gland and
armour earthing, etc. complete as required. Lugs shoulsd by bimattalic
type
4.10

A 3.5 Core x 300 Sqmm A2XFY Cable 12 Each 2,640 31,680 450 5,400

B 3.5 Core x 240 Sqmm A2XFY Cable R.ONLY Each 2,380 0.00 405 0.00

C 3.5 Core x 185 Sqmm A2XFY Cable R.ONLY Each 1,773 0.00 360 0.00

D 3.5 Core x 150 Sqmm A2XFY Cable R.ONLY Each 1,732 0.00 288 0.00

E 3.5 Core x 120 Sqmm A2XFY Cable R.ONLY Each 1,344 0.00 234 0.00

F 3.5 Core x 95 Sqmm A2XFY Cable R.ONLY Each 1,122 0.00 216 0.00

G 3.5 Core x 70 Sqmm A2XFY Cable 4 Each 946 3,784 162 648

H 3.5 Core x 50 Sqmm A2XFY Cable R.ONLY Each 796 0.00 144 0.00

I 3.5 Core x 35 Sqmm A2XFY Cable 6 Each 548 3,288 126 756

J 4 Core x 25 Sqmm A2XFY Cable 28 Each 479 13,412 108 3,024

K 4 Core x 16 Sqmm A2XFY Cable 6 Each 477 2,862 90 540

L 4 Core x 10 Sqmm A2XFY Cable 48 Each 330 15,840 90 4,320

Supply and providing the end terminations with Copper cable lugs,
4.20
BRASS cable glands, taping, crimping,etc. complete as required.

CONTROL CABLES
A 4Core x 10 Sqmm YFY Cable 10 Each 237 2,370 90 900

B 4Core x 4Sqmm YFY Cable 26 Each 143 3,718 90 2,340

C 3 Core x 4 Sqmm YWY Cable. 20 Each 138 2,760 63 1,260

881970601.xlsx PAGE 20/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT
D 3 Core x 2.5 Sqmm YFY Cable 40 Each 323 12,920 63 2,520

E 3 Core x 1.5 Sqmm YFY Cable 40 Each 326 13,040 63 2,520

F 3 Core x 1.5 Sqmm YY Cable 20 Each 269 5,380 63 1,260

G 19 Core x 2.5 Sqmm YFY Cable 4 Each 179 716 54 216

H 7Core x 2.5 Sqmm YFY Cable 4 Each 179 716 54 216

5.00 DISTRIBUTION SYSTEM, CONDUITS, WIRING AND ACCESSORIES

Supply and running of 1100 V grade FRLS PVC insulated copper

conductor wires in FRLS PVC conduits as per specification titled
"DISTRIBUTION SYSTEM, CONDUITS, WIRING AND
ACCESSORIES" and following details.The rate shall include supply and
installation of all materials like conduits, wires, fixing accessories, etc. as
detailed in Clause of above mentioned specification.

OPEN CONDUITS WORKS

A 50 mm dia, 2mm Thick FRLS PVC conduit with all accessories. 50 Mtr 332 16,600 72 3,600

B 32 mm dia, 2mm Thick FRLS PVC conduit with all accessories. 1,500 Mtr 222 333,000 45 67,500

C 25 mm dia, 2mm Thick FRLS PVC conduit with all accessories. 1,500 Mtr 182 273,000 45 67,500

D 20 mm dia, 12mm Thick FRLS PVC conduit with all accessories. 500 Mtr 160 80,000 35 17,500

Supply and running of 10 Sqmm FRLS PVC insulated multistrand

R.ONLY Mtr 150 0.00 29 0.00
E copper conductor wire in existing conduits/raceways.

Supply & Running of 6 Sqmm FRLS multistrand copper conductor wire

R.ONLY Mtr 121 0.00 23 0.00
F in existing conduits.For db earthing & socket wiring

Supply and running of 3 RUNS X 6+ 1 RUN X 4Sqmm FRLS PVC

insulated multistrand copper conductor wire in existing conduits-50mm 50 Mtr 68 3,400 11 550
G DIA

Supply and running of 2 RUNS X 4+ 1 RUN X 2.5 Sqmm FRLS PVC

insulated multistrand copper conductor wire in existing conduits-32mm 1,500 Mtr 121 181,500 17 25,500
DIA

Supply and running of 2RUNS X 2.5+ 1 RUN X 1.5 Sqmm FRLS PVC
insulated multistrand copper conductor wire in existing conduits-25mm 1,500 Mtr 78 117,000 14 21,000
H DIA

Supply and running of 2RUNS X 1.5+ 1 RUN X 1.0 Sqmm FRLS PVC
insulated multistrand copper conductor wire in existing conduits-20mm 500 Mtr 78 39,000 14 7,000
I DIA

6.0 SOCKET OUTLETS

6.10 METAL CLAD INDUSTRIAL TYPE SOCKET OUTLETS

Supply, Receiving, unloading at site, storing, erection, testing and

commissioning of IP 54 factory made metal clad totally enclosed housing
with industrial socket/interlocked combined rotary switch and socket
with scrapping earth connection and plug top. In case of interlocked
socket, the interlocking should ensure that the plug cannot be inserted or
withdrawn while the switch is in 'ON' position. (all switches & sockets
shall be housed in painted MS boxes). The erection rate shall include
supply of angle iron frame work and fixing accessories such as grip
bolts/grouting/ welding to steel structures etc.

63 Amps, 5-pin ,440V, three phase metal clad industrial socket with plug
top, controlled by 63 Amps, FP RCBO 30mA .
A R.ONLY Each 15,000 0.00 270 0.00
( Model : LEGRAND or Approved Equivalent )

32 Amps, 5-pin ,440V, three phase metal clad industrial socket with plug
top, controlled by 32 Amps, FP RCBO 30mA .
B 5 Each 7,500 37,500 216 1,080 PRODUCTION AREA
( Model : LEGRAND or Approved Equivalent )

16 Amps, 3-pin,230v, single phase metal clad industrial socket with plug
top, controlled by 20 Amps DP RCBO 30mA .
C 10 Each 5,000 50,000 180 1,800 SERVER RACK
( Model : LEGRAND or Approved Equivalent )

5.1.2 THERMO PLASTIC

Supply, Receive, unloading at site, storing, erection, testing and

commissioning of IP65 factory made THERMO PLASTIC totally
enclosed Housing with industrial socket/interlocked combined rotary
switch and socket with scrapping earth connection and plug top. In case
of interlocked socket, the interlocking should ensure that the plug cannot
be inserted or withdrawn while the switch is in 'ON' position. (all
switches & sockets shall be housed in painted MS boxes). The erection
rate shall include supply of angle iron frame work and fixing accessories
such as grip bolts/grouting/ welding to steel structures etc.

Combination of 32 Amps, 5-pin ,440V, Three phase thermo plastic

industrial socket controlled by 32 Amps, 4P RCBO 30mA with plug top.
+ 20 Amps, 3-pin ,230V, Three phase thermo plastic industrial socket
A 4 Each 35,000.00 140,000.00 5,000.00 20,000.00
controlled by 20 Amps, 2P RCBO 30mA with plug top in Thermoplastic
enclosure .
( Model : LEGRAND or Approved Equivalent )

125 Amps, 5-pin ,440V, Three phase thermo plastic industrial socket
B controlled by 125 Amps, 4P MCB with plug top,. 1 Each 20,000.00 20,000.00 3,500.00 3,500.00 PROD ODU
( Model : LEGRAND or Approved Equivalent )

32 Amps, 5-pin ,440V, Three phase thermo plastic industrial socket

C controlled by 32 Amps, 4P RCBO 30mA with plug top,. 3 Each 15,000.00 45,000.00 2,500.00 7,500.00 COMPRESSOR +ODU
( Model : LEGRAND or Approved Equivalent )

881970601.xlsx PAGE 21/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

6.1.1 MODULAR TYPE DOMESTIC SOCKET OUTLETS

Supply, Receive, unloading at site, storing, erection, testing &

commissioning of power points by providing following switches/sockets
mounted on suitable size GI boxes fixed flush/surface on to the wall with
all fixing and wiring accessories.

BANK OF 2 Nos.of 6 Amps socket, 3-pin ,230 Volts, single phase

ROUND PIN socket with 16 Amps single pole switch with indicating
A 30 Each 890 26,700 144 4,320 OFFICE
Lamp+ USB SOCKET with GI metal box with press fit type PVC front
plate complete with all accessories.

6/16 Amps, 5-pin ,230 Volts, single phase round pin socket with 16
B Amps single pole switch with indicating LAMP with GI metal box with 20 Each 575 11,500 63 1,260 OFFICE
press fit type PVC front plate complete with all accessories.

6 Amps, 3 pin ,230V, single phase round pin socket with 6 Amps SP
C switch along with indicating lamp with GI metal box with press fit type 15 Each 444 6,660 63 945 OFFICE
PVC front plate complete with all accessories.

7.0 EARTHING :
Providing the earth stations with necessary materials labour,civil works
7.10 such as construction of 600 x 600 chamber with CI cover, etc.,complete
as required and as per IS-3043.complete.

CI PIPE Earthing
Supply of CI pipe 100mm dia at a depth of 3000 mm. in an earth pit of
600 x 600 x 3000 mm. filled with 25Kg each salt and charcoal mixed
with sand in alternate layers 150 mm. each upto a height of 2000mm.
from bottom. Pipe shall have provision for watering through a funnel. It
shall also have provision for connecting 50 x 6 mm. GI Flat on two sides.
A. CI 100mm dia Pipe - 1no
A B. Funnel and clamping accessories of SS nuts&bolts - 1sets 10 set 11,872 118,720 7,200 72,000 TRAFO YARD
C. Salt -25 kg each -1 bag
D. Charcoal -25 kg each -1 bag
E. GI Flat – 50 x 6mm, 1 mtr
The Precast RCC chamber size shall be 600 x 600 mm with heavy duty
C.I. Cover plate. The identification number shall be provided both inside
and outside. As per IS 3043
.( Make - Indelec or Approved Equivalent)

Copper Plate Earthing

Supply of Copper plate of size 600mm.x 600mm. x 3mm. at a depth of
3000 mm. in an earth pit of 600 x 600 x 3000 mm. filled with 25Kg each
salt and charcoal mixed with sand in alternate layers 150 mm. each upto a
height of 2000mm. from bottom. A GI-Earthing pipe, 40mmdia, 2.5metre
long, shall have provision for watering through a funnel. It shall also
have provision for connecting 25 x 3 mm. Copper Flat on two sides.
A. Copper plate of size 600mm.x 600mm. x 3mm - 1no / 10kgs
B B. GI-Earthing pipe, 40mmdia, 3 metre long with funnel and clamping 2 set 25,585 51,170 8,100 16,200 TRAFO YARD
accessories - 1 no
C. Salt -25 kg each -1 bag
D. Charcoal -25 kg each -1 bag
E. Copper Flat – 30 x 6mm, 5.5m.
The precast RCC chamber size shall be 600 x 600 mm with heavy duty
C.I. Cover plate. The identification number shall be provided both inside
and outside. As per IS 3043.
.( Make - Indelec or Approved Equivalent)

Maintenance Free Single rod, Copper Bonded Earthing System - Dia

20mm; 3metres
Providing maintenance free Earthing system comprises of molecularly
bonded copper of 99.9% purity on low carbon steel of 3m length , having
a diameter of 20mm with copper coating thickness of 250 microns with
fault current withstand capability of 18 KA rms value for 1 second and I
peak of 50 KA. Universal Clamp (17 25 RTC) made of SS 304 for
clamping. Earth enhancing compound is used for improving the soil
M/C AND UTILITY
C conductivity. The material shall be mineral inert to sub soil and shall not 12 set 10,118 121,416 7,200 86,400 EARTH
pollute the environment and non corrosive to earth rod. The material
should have a resistivity less than 0.2 Ωm. It should be free from
hazardous substances The mineral compound is required to have 25
kg/pit of the total composite. Polypropylene & Polyethylene (UFE)Earth
electrode inspection chamber with heavy duty cover should be used to
cover the Earth Rod. The dimension shall be 250mmx 250mmx 250mm
with a weight bearing capacity of 50KN.
.( Make - OBO or Approved Equivalent)

7.20 EARTHING TAPES/WIRES

Supply of earth tapes/wires as per specification, complete. Erection rate

shall be both indoor & outdoor inclusive of earth excavation work.

7.2.1 GI FLAT /TAPE

881970601.xlsx PAGE 22/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

Supply, Installation, testing and commissioning of following GI strips as

per IS 3043 considering the site soil resistivity and Fault current rating of
the system .Flat conductor shall be of Hot Dipped , Coating of
galvanization shall be as per DIN ISO 1461:2009.

GI strip should be rolled strip or slit strip with smooth edges with a single
length of 6Mtrs.Folded strip with uneven length should not be used.

Strip should be manufactured and complied as per IS 3052:1986.

Earth Flat should be tested and test report shall be submitted from third
party NABL accredited laboratory for below tests.
1. Electrical resistance test before and after salt mist
2. Tensile strength
3. Bend test
4. Adhestion test
5. Average mass of zinc coating as per DIN ISO 1461.
6. Salt spray test
Meets the requirement of VDE0185/305(IS-IEC 62305)
Should be tested and used exclusively for Earthing system, lightning
protection earthing system and ring equipotential bonding .
Tested as per IEC 62561(1-8).( Make - INDELEC or Approved
Equivalent )

A 50 x 10 mm Hot Dip Galvanised Iron Tape 100 Mtrs 426 42,600 126 12,600

B 50x 6 mm Hot Dip Galvanised Iron Tape 50 Mtrs 254 12,700 90 4,500

C 40 x 6 mm Hot Dip Galvanised Iron Tape 50 Mtrs 204 10,200 72 3,600

D 25 x 6 mm Hot Dip Galvanised Iron Tape 100 Mtrs 135 13,500 54 5,400

7.2.2 COPPER FLAT /TAPE

Supply, Installation, testing and commissioning of following CU strips as

per IS 3043 considering the site soil resistivity and Fault current rating of
the system .Copper conductor should be ETP grade 99.9% purity.

Copper strip shall be rolled type and minimum length of copper strip
should be 20mtrs.

Strip should be manufactured and complied as per IS 3052:1986.

Earth Flat should be tested and test report shall be submitted from third
party NABL accredited laboratory for below tests.

1. Electrical resistivity test( Electrical resistivity should be as low as

0.018 µ.ohm.m)
2. Tensile strength
3. Copper purity test

Meets the requirement of VDE0185/305(IS-IEC 62305)

Should be tested and used exclusively for Earthing system, lightning
protection earthing system and ring equipotential bonding .
Tested as per IEC 62561(1-8).( Make - INDELEC or Approved
Equivalent )

A 40 x 6 mm Copper Tape with 2mm thick Black PVC sleeves 20 Mtrs 2,261 45,220 72 1,440

B 25 x 6 mm Copper tape 2mm thick Black PVC sleeves 10 Mtr 1,459 14,590 54 540

7.2.3 COPPER EARTHING FLEXIBLE CABLE - GREEN

A 1CX25 Sqmm PVC insulated flexible copper WIRE 200 Mtr 54 10,800 11 2,200

B 1CX16 Sqmm PVC insulated flexible copper WIRE 250 Mtr 54 13,500 11 2,750

C 1CX10 Sqmm PVC insulated flexible copper WIRE 200 Mtr 54 10,800 11 2,200

D 1CX4 Sqmm PVC insulated flexible copper WIRE 100 Mtr 54 5,400 11 1,100

7.2.4 Supply and installation of single compression PG gland with ring type /
pin type copper lugs suitable for earthing cables

A 1CX25 Sqmm PVC insulated flexible copper WIRE 10 Set 20 200 5 50

B 1CX16 Sqmm PVC insulated flexible copper WIRE 10 Set 20 200 5 50

C 1CX10 Sqmm PVC insulated flexible copper WIRE 10 Set 20 200 5 50

D 1CX4 Sqmm PVC insulated flexible copper WIRE 20 Set 20 400 5 100

I Supply of Earth Busbar & Earthing Box with all accessories .

300mm long , 50x6mm GI Flat on SMC/DMC insulator with M12 hole

A 2 set 6,420 12,840 360 720
@ 25mm intervals along with front acrylic cover protection .

300mm long ,40x6mm GI Flat on SMC/DMC insulator with M12 hole @

B 2 set 5,136 10,272 360 720
25mm intervals along with front acrylic cover protection .

300mm long , 25x6mm GI Flat on SMC/DMC insulator with M6 hole @

C 2 set 3,844 7,688 360 720
25mm intervals along with front acrylic cover protection .

8.0 MISCELLANEOUS ITEMS :

8.20 STEEL ITEMS

Supply, fabrication, erection with 2 coats of premier painting& final coat
as per site of MS steel items as required as per specification complete.
Generally steel items include cable trays and supporting arrangements SECONDARY
A 3 M.T. 93,284 279,852 32,400 97,200 SUPPORTS
and any other steel items not covered in other items of schedule of
quantities. MS Steel should be BOX Type support min size of
25x25x3mm .

881970601.xlsx PAGE 23/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

8.30 GI LADDER TYPE CABLE TRAYS :AS PER IEC 61537:2006

Supply & erection of the following sizes ladder type cable tray made of
8.3.1 PROFILED DESIGN hot dipped galvanised with necessar grip
bolts,nuts, etc.,complete as required.

75X75X600 mm wide Profilzed design width 2 no.s of 50x10mm GI

A 50 Mtr 1,830 91,500 288 14,400
strip along tray

75X75X450 mm wide Profilzed design width 2 no.s of 25x6mm GI strip

B 25 Mtr 1,287 32,175 234 5,850
along tray

50X50X300 mm wide Profilzed design with 2 runs of 25x6mm GI strip

C 250 Mtr 886 221,500 180 45,000
along tray .

50X50X150 mm wide Profilzed design with 2 runs of 25x3mm GI strip

D 50 Mtr 769 38,450 162 8,100
along tray .

PRE GALVANISED PERFORATED CABLE TRAYS :AS PER IEC

8.40
61537:2006
Supply & erection of the following sizes perforated type cable tray made
of 14/16 SWG with necessary bolts, nuts,double washers, etc., complete,
necessary supports, brackets, angle iron,suspension are measured
separately under the heading "Steel Items".(THE RATE SHALL
INCLUDE TOP COVER)
300 mm wide x 75mm depth. Profilzed design with 2 runs of 25x6mm GI
A 50 Mtr 1,718 85,900 216 10,800
strip along tray & with top cover

150 mm wide x 50mm depth ,Profilzed design with 2 runs of 25x3mm GI

B 100 Mtr 945 94,500 198 19,800
strip along tray & with top cover

50 mm wide x 50mm depth,Profilzed design with 2 runs of 8 SWG GI

C 550 Mtr 513 282,150 99 54,450
WIRE along tray & with top cover

Design , supply , erection of Suspended support arrangement for light

fixture & CABLE TRAYS consist of 2no.s of 6 mtrs length "GRIPPLE"
high tensile strength wire , 1no. MS Slotted base C channel , 2no.s Eye
8.50 1 LOT 500,000 500,000 50,000 50,000
bolts other hardware required to support LED lights AND 300mm x DETAILING SHALL
50mm wide perforated cable tray . Weight of cable tray , cables and BE DONE ATFER
lights fixture shall be considered to arrive size of tensile wire . LAYOUT
APPROVAL

8.60 UPS SYSTEM

Supply, erection, testing & commissioning of 10KVA ONLINE UPS
with 3 phase input and three phase output along with Hormonic filters
and sealed maintanence free batteries, Output isolation transformer in
8.6.1 built complete with all accessories. For 15 minutes backup. The rate 1 Ea 450,000 450,000 15,000 15,000
shall include copper cable Connecting UPS and Battery. Communication
Port RS 485 and parallel operation capabilities .
( FUJI Electric or Approved Equivalent)
UPS POWER-WORKSTATION

2.00 TOTAL FOR POWER WORKS 7,174,588 1,129,315

3.00 SECTION:3- - INTERNAL & EXTERNAL LIGHTING WORKS

1.0 FACTORY-BUILT MCB DISTRIBUTION BOARDS:

Supply, store, erection, testing and commissioning of MCB Distribution
Boards, wall-mounted (either surface or recessed type). The erection
rates shall include fixingof DB on wall including supply of all fixing
accessories, civil works etc.Space provision shall be made for mounting
RCBO in the incomer MCB. The rate shall be same for any combination
of outgoings TP/SP.
1.1 ADD-ON BOX FOR TIMER BASED DB LOGIC

MS powder coated Adaptor Box houisng Auto / manual switch knob type
, 24 hours programmable digital mini timer and 32 A 4 Pole Mini
A R.ONLY Each 31,114 0.00 1,440 0.00
contactor logic with LED ON, OFF indication lamps.( Colour & width
shall be same of 7 seg LDB )

2.00 POINT WIRING:

NOTE : Light point controlled directly by MCB in LDB shall be
measured under the heading SUBMAINS / CIRCUIT MAINS only

2.10 POINT WIRING WITH 16G GI CONDUIT:

881970601.xlsx PAGE 24/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

Wiring with 2x2.5Sqmm FRLS PVC insulated 1100 V grade FRLS

copper conductor wires and 1 x 1.5Sqmm FRLS PVC insulated earth
wire in 16G GI conduits of not less than 20 mm size as per specification
titled "DISTRIBUTION SYSTEM, CONDUITS, WIRING
ANDACCESSORIES". Height of ceiling varies from 6.5 - 7 metres. A
separate neutral shall be run for each circuit. Any civil works involved
like wall chipping ,plaster and finishing shall be considered and
executed to satifaction of enginer in charge .

Note: The rates for the following items shall include supply and
installation of Modular type of switches, sockets, fan regulators, etc.,
along with all necessary fixing accessories like mounting screws,
concealed/surface mounted switch boxes suitable for modular type
switches, internal wiring, top plate, etc., all complete as required.
The modular type switches, sockets, regulators shall be of approved
make & shade.

Single light point controlled by 6 Amps SP switch with average length

A 20 Each 1,200 24,000 239 4,780
of 12 mtrs.

Two light point controlled by 6 Amps SP switch with average length of

B 15 Each 1,500 22,500 279 4,185
15 mtrs.

Three light point controlled by 6 Amps SP switch with average length of

C 10 Each 1,800 18,000 306 3,060
17 mtrs.

Four light point controlled by 6 Amps SP switch with average length of

D 5 Each 2,000 10,000 333 1,665
19 mtrs.

Five light point controlled by 6 Amps SP switch with average length of

E R.ONLY Each 3,000 0.00 360 0.00
21 mtrs.

F One light point controlled by two Nos. 6 Amps 2 way SP switch 2 Each 1,500 3,000 378 756

Ceiling fan point with fan hook box including 6 Amps single pole control
G 1 Each 1,500 1,500 374 374
switch including 100 Watts,5 Step, two module type electronic regulator.

Wall mounted fan point including 6 Amps single pole control switch as
per specification. (Note that wall mounted fans shall be mounted at
H suitable height in the range of 5-6 metres from FFL while regulator and 4 Each 1,500 6,000 266 1,064
switch to be mounted below the fan at the same height as that of other
switches).

Exhaust fan point with wall-mounted 6Amps, 3-pin socket near fan
location and 6 Amps single pole controlling switch located
I 6 Each 1,500 9,000 284 1,704
independently. The rate shall also include supply of 5 Amps, 3-pin plug
top .

3.00 INDOOR LIGHTING & FAN FIXTURES

Supplying, installation, testing & Commissioning of the following types
3.10 of light & fan ,starters/LED DRIVERS ,controlgear, connecting wire
with Lamps etc. complete as required.

NOTE:- The cost shall also include suitable threaded rods /MS down
rods / chains / ball & socket arrangements, etc., with all other
accessories complete as required for surface/ suspension/ Recessed of
lights, fans to the required level above FFL.
AVERFAGE LIFE L70B50 MIN 50,000 Burning Hours
40W LED High efficiency aluminium profile linear batten with
polycarbonate
diffuser for enhanced productivity. Ingress protection IP40.
A 20 Each 1,800 36,000 250 5,000 PROD.
( Philips :BN308C LED40S-6500 L120 PSU WH or approved
equivalent).
Lumen Output - 4000 lumens , CRI>80 , CCT = 5700 deg K

200W LED High efficiency High bay lights in Aluminium Die cast
housing and High quality Polycarbonate cover with integrated
B lens . Ingress protection IP40. 5 Each 7,500 37,500 250 1,250 PROD.
(Havells :Saucer genx DD P, 200W_ADV_ or approved equivalent).
Lumen Output - 29000 lumens , CRI>80 , CCT = 5700 deg K

150W LED Outdoor focus Type light fixture with Thermo plastic box
suitable for 8 terminal block ( loop in and loop out) , 10A SP MCB along
with 3C x 1.5Sqmm Copper cable above 6. 5 mtrs from FFL and all other
C 2 Each 7,000 14,000 250 500 PROD.
accessories complete.
(Wipro :LF20-192-060-57-BS or Approved equivalent)
Lumen output - 100 lm/watt, CCT -5700/6500K, CRI>80.

881970601.xlsx PAGE 25/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT
Junction Boxes with terminals for above Luminaires.
D 30 Nos 800 24,000 150 4,500 PROD.
(Hensel : DK 0202G or approved equivalent)

60W LED Recessed mount High Efficiency lights fixture

E ( Havells : Plano Rec 2x2 or Approved equivalent) 120 Each 4,500 540,000 250 30,000 PROD.
Lumen output - 120 lm/watt, CCT -5700/6500K, CRI>80.

36W LED Recessed mount LED lights fixture

F ( Havells :Venus EXL or Approved equivalent) 40 Each 3,000 120,000 250 10,000 OFFICE'
Lumen output - 120 lm/watt, CCT -5700/6500K, CRI>80.

15W LED Recessed mount LED Down lights fixture

G ( Havells : VIBE FL Down-lighter or Approved equivalent) 50 Each 1,500 75,000 250 12,500 OFFICE'
Lumen output - 100 lm/watt, CCT -5700/6500K, CRI>80.

3.20 CEILING FANS:

Supplying, erection & commissioning of white/ off white colour ceiling
fan with double ball bearings, accessories, connecting wire & other
standard accessories
A 1200mm Sweep, 3 blade, 5 star rated ceiling fan. SUPER FAN 1 Each 3,924 3,924 270 270

3.30 WALL MOUNTING FANS:

Supplying, erection & commissioning of decorative wall-mounted
oscillating type fan as specified. adjustment & meshgaurd and other
standard accessories with inbuilt speed controller.
A 450 mm sweep with inbuilt 5 speed regulator ALMONARD 2 Each 5,000 10,000 270 540

3.40 EXHAUST FANS:

Supplying, erection & commissioning of exhaust fans with sheet metal
blades, necessary brackets, anti-corrosive epoxy painting, rubber
cushions, etc.

300 mm impeller dia, 1400 rpm exhaust fan with louvres(single phase) R.ONLY Each 4,501 0.00 405 0.00
A

150 mm impeller dia, 1400 rpm exhaust fan with louvres(single phase) 6 Each 1,369 8,214 405 2,430
B

3.00 TOTAL FOR INTERNAL & EXTERNAL LIGHTING WORKS 962,638 84,578

4.00 SECTION 4- OPEX ELECTRICAL WORKS

Distribution board / Isolator / starter board

1.00

Removing of Distribution board under supervision, Inclusive of all

consumables & Hardware like Nut Bolts, washers, spring washers Suitable
size & Quantity Anchor fasteners, Steel etc.
1.10
Scope Involves : -
1) All types of Distribution boards
2) Removal and shifing of supporting structure.
2) Removal of all incoming & outgoing cable from Distribution board and
cramp on nearest existing cable tray
3) Unloading & Shifting of this distribution board to shed which is on aprrox.
100 Mtrs from the building.
A 4) Dismantling earthing terminals.
LT PANEL / Wall mounted / stand alone Distribution board / Isolator / starter
board / Junction Board up to 1 .5 mtrs Length .
5.00 set - 5,000 25,000

1.20 Removing of Existing Cable

Removing, Dismantling, unloading, shifting of following Al/Cu cables.

Scope include removal of cables, properly reel the cables and shifting to shed.
1.2.1
A LT Cable upto 6 sq mm 100.00 Mtr - 35 3,500

B LT Cable from 10 sq mm to 25 sq mm 100.00 Mtr - 50 5,000

C LT Cable from 35 sq mm to 95 sq mm 100.00 Mtr - 80 8,000

D LT Cable from 120 sq mm to 185 sq mm 100.00 Mtr - 130 13,000

E LT Cable upto 240 sq mm to 400 sq mm 100.00 Mtr - 150 15,000

1.30 Removing of Existing Cable TRAY

Removing, Dismantling, unloading, shifting of following TRAYS.

Scope include removal of cables, properly reel the cables and shifting to shed.
1.3.1
A LT Cable upto 150mm WIDE 25.00 Mtr - 175 4,375

B LT Cable from 200 TO 450mm wide 25.00 Mtr - 200 5,000

C LT Cable from 600 to 750mm wide 25.00 Mtr - 400 10,000

D LT Cable from 1000mm to 1200mm 25.00 Mtr - 350 8,750

E LT Cable upto 1500 mm wide 25.00 Mtr - 600 15,000

Disconnection of Existing Cable Termination

1.40

Removing, Dismantling, unloading, shifting of following Al/Cu cables end

termination. And same retermination, Installation, testing and commissioning
with new supply of Double compression Brass Nickel Pleated cable gland with
all necessary hard wears like lugs & PVC hood, etc. of following AL/CU XLPE
insulated copper/alum. conductor armoured cables including supply of all
materials, drilling of gland plates and dressing of cables inside panel.
1.4.1
LT Cable upto 6 sq mm 10.00 Each - 150 1,500
A

B LT Cable from 10 sq mm to 25 sq mm 10.00 Each - 300 3,000

881970601.xlsx PAGE 26/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.
C-23-24/137 ZFPG-EL-TBOQ-401
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU DATE 3/29/2025
SUBJECT:HT INFRA AND INTERNAL ELECTRICAL WORKS REVISON R0
ERECTION ERECTION
SL.NO DESCRIPTION OF WORK QUANTITY UNIT SUPPLY RATE SUPPLY AMOUNT REMARKS
RATE AMOUNT

C LT Cable from 35 sq mm to 95 sq mm 10.00 Each - 400 4,000

D
LT Cable from 120 sq mm to 185 sq mm 10.00 Each - 600 6,000

E LT Cable upto 240 sq mm to 400 sq mm 10.00 Each - 900 9,000

Disconnect , Dismentling and handover of following lighting fixtures

1.50
lighting fixtures including mounting of fixtures along with all its accessories,
checking of internal wiring, structural steel & hard wears etc. and with all kind
of required hardwears to complet installtion. (Inclusive of installation of
termination at light fitting & JB side & installation and termination of JB's if
1.5.1 required)

Existing 2 x 36W Surface/pendant mounted Industrial Light fixture

10.00 Each - 100 1,000
B

Existing Lowbay/Midbay Surface/pendant mounted Industrial Light fixture

10.00 Each - 300 3,000
C

4.00 TOTAL FOR OPEX ELECTRICAL WORKS - 140,125

ABSTRACT
Sl. No. DESCRIPTION SUPPLY AMOUNT ERECTION AMOUNT BUA
26,663
1 TOTAL FOR INFRASTRUCTURE WORKS 7,330,000 2,762,450

2 TOTAL FOR POWER WORKS 7,174,588 1,129,315 311.44

3 TOTAL FOR INTERNAL & EXTERNAL LIGHTING WORKS 962,638 84,578

4 TOTAL FOR OPEX ELECTRICAL WORKS - 140,125

I BASIC TOTAL - ELECTRICAL WORKS 15,467,226 4,116,468 19,583,694

II ADD: GST ON SUPPLY@ 18% 2,784,101 740,964

III GRAND TOTAL - ELECTRICAL WORKS 18,251,327 4,857,432

IV Grand Total for Supply & Erection with Tax 23,108,759

Special Notes to bidders

1) All supply items will be in contractor's scope of work wherever mentioned.
2) Quantities indicated in this BOQ are tentative / indicative & contractor will be solely
responsible for calculating quantities as per site conditions, accordingly supply & erection of
materials at site.
3) The price quoted against this tender shall remain firm during entire period of contract till
completion. No cost escalation will be acceptable in this regards.

4) Cable quantities indicated in this BOQ are tentative / indicative & contractor will be solely
responsible for calculating quantities as per site conditions, accordingly supply & erection of
materials at site. Payment will be made as per exact actual cable laid at site measurement.
Payment will not be made for procured cable by contractor but same was not used.

5) Before procurement of supply material contractor should take prior approval from client /
Consultant/ PMC and actual measurement at site. Contractor shall be fully responsible for supply
of material & its accessories based on actual site condition.

6) Before procurement of lighting fixtures contractor has to take approval from client regarding
type and color temperature of lighting fixture.
found, unit rates for the same should be submitted at the time of quoting. Later stage if any
material required as per relevant codes / standards / scope which is not covered in Tender BOQ
8)
but All testingforshall
required be in accordance
successful with
completion relevant
of job latest
will be IS care
taken standards and as per
by contractor international
(free of cost) at site
standards.
9) Submission of As built drawing , CEIG approved drawings in hard copies - 3sets (colour)and
soft copy- 2 sets with relevant O&M manual ,Inspection reports , test reports , comissioning
reports , warranty & guarantee certificates from OEM / Priniciple vendor complete .

10) Submission of Standard operating procedures for all Equippemnts , appartus for reliable
functioning.

11) Conduct Traning for authorized/ designated personnel for handling of equiipment and
operational funtionality etc .

12) Material supplied in excess at site but not used for project . Contractor has to take back
material at his own cost and perform all formalities with proper gate pass and credit note if any .

13) NO MATERIAL SHOULD BE SUPPLIED TO SITE WITHOUT PO

881970601.xlsx PAGE 27/44 AEDBM CONSULTANTS PVT LTD,BENGALURU.

PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU
SUBJECT:IT WORKS

BILL OF MATERIALS - NETWORKING

Summary Of Points Breakup Details

Sl Description Work
station Total
1 Total Data 1 30 0 30.00
2 Total Data for wifi, CCTV & ACS 5 0 5.00
3 Total Voice 1 30 0 30.00
4 Total 65.00
5 Dual Faceplate 30 0 30.00
6 Single Faceplate 10 0 10.00
7 Average length 80 5,200.00

Rate ( Excluding Taxes

ITEM PARTICULARS Total UOM
& Duties ) INR
IT Networking Passive Components Supply

A Copper Components - Horizontal Data

4 Pair 23 AWG Cat6 UTP Cable for Data

1 9 Box 8,000.00
(305 mtrs/Box)- GREY colour
Cat6 Information outlet for Data -GREEN
2 35 Each 300.00
colour
3 Dual Port Faceplate Ivory with GI box 30 Each 300.00
4 Single Port Faceplate Ivory with GI box 5 Each 200.00
5 Blank Inserts-Grey colour - Pack of 25 Nos. 2 Each 60.00
6 1 U Cat6 24 Port Loaded Angular panel Data 2 Each 3,000.00
Cat6 RJ45 to RJ45 Single stranded 7ft Rack
7 30 Each 250.00
Data Resource - GREY colour
Cat6 RJ45 to RJ45 patch chord 3ft User -
8 30 Each 150.00
GREY colour

B Copper Components - Horizontal Voice

Cat6 Information outlet for Voice -BLUE

1 30 Ea 300.00
colour
1 U Cat6 24 Port Loaded Angular panel
2 2 Ea 3,000.00
Voice 1 Field
1 U Cat6 24 Port Loaded Angular panel
3 R.O Ea 3,000.00
Voice 1 Resource
Cat6 RJ45 to RJ45 patch chord 7ft Rack
4 30 Ea 250.00
Voice BLUE colour
Cat6 RJ45 to RJ45 patch chord 3ft User-
5 30 Ea 150.00
BLUE colour
 C Local Components & Cable Trays

50 Pair Wall mount MDF Wiring block with

vertical cable manager , connecting block ,
1 1 Ea 5,000.00
jumber trough , label holders and all
Mounting Accessories
2 50 Pair Cat 3 Indoor Multipair Riser cable 50 Mtrs. 400.00
Outdoor Armoured Unitube fibre cable
3 2,000 Mtrs. 300.00
Multi-mode OM3 6-core, HFFR
50 pair Jelly Filled outdoor Armoured
4 50 Mtrs 500.00
Telephone riser cable
200 x 40 mm Powder coated Race ways
5 100 750.00
with cover Mtrs
100 x 40 mm Powder coated Race ways
6 50 650.00
with cover Mtrs
7 Juction Box 210 x 50 10 Nos 550.00
8 Juction Box 110 x 50 10 Nos 450.00
32 mm Dia 2mm thick FRLS PVC conduit
9 200 Mtrs 250.00
with all accessories
25 mm Dia 2mm thick FRLS PVC conduit
10 250 180.00
with all accessories Mtrs

D Racks, Accessories & Riser

24 U Floor Mount Network Closed rack with

front glass door, double section, Vertical
Cable Channels, with power strips of 12
1 1 Ea 25,000.00
sockets (2 No.) DUAL POWER , Mounting
Flange, bolts nuts and all accessories.- data
server

2 48 Port Network switch 2 Ea 35,000.00

1U Fixed Fibre panel rack-mount 48-port
3 1 Ea 15,000.00
with 1 splice tray, unloaded
Adaptor plate with 3 SC duplex MM
4 3 Ea 536.00
adaptors
5 Blank adaptor plates 3 Ea 390.00
SC simplex multi-mode OM3 LSZH pigtail,
6 3 Ea 390.00
1m
SC-LC duplex Multi-mode OM4 LSZH patch
7 3 Ea 2,925.00
cord, 3m

E Certifications and Site Management

Testing, Documentation and OEM
1 65 Nos. -
Certification Charges

I BASIC FOR IT NETWORKING, (DATA/ VOICE)

II ADD: GST @ 18%

III TOTAL FOR IT NETWORKING, (DATA/ VOICE) WITH TAXES

EXCLUSIONS
1) ALL ACTIVE COMPONENTS LIKE ROUTERS , FIRE WALL , SERVERS, SOFTWARE .
2) ALL END USER HARDWARE LIKE COMPUTERS , WIFI ROUTER,EPABX AND IP TELEPHONE INSTRUMEN
 DATE 3/29/2025
REVISON R0

1.35

17.05 305MTR BOX

e ( Excluding Taxes Amount ( Excluding Taxes &

& Duties ) INR Duties ) INR
Installatio Supply Installation
n

1,000.00 72,000.00 9,000.00

59.00 10,500.00 2,065.00

73.00 9,000.00 2,190.00

73.00 1,000.00 365.00
59.00 120.00 118.00
683.00 6,000.00 1,366.00

29.00 7,500.00 870.00

29.00 4,500.00 870.00

59.00 9,000.00 1,770.00

683.00 6,000.00 1,366.00

683.00 0.00 0.00

29.00 7,500.00 870.00

29.00 4,500.00 870.00

 2,438.00 5,000.00 2,438.00

73.00 20,000.00 3,650.00

49.00 600,000.00 98,000.00

122.00 25,000.00 6,100.00

98.00 75,000.00 9,800.00

75.00 32,500.00 3,750.00

73.00 5,500.00 730.00

73.00 4,500.00 730.00

49.00 50,000.00 9,800.00

39.00 45,000.00 9,750.00

10,000.00 25,000.00 10,000.00

1,000.00 70,000.00 2,000.00

975.00 15,000.00 975.00

146.00 1,608.00 438.00

98.00 1,170.00 294.00
98.00 1,170.00 294.00

244.00 8,775.00 732.00

250.00 - 16,250.00

1,122,843.00 197,451.00
 202,111.74 35,541.18

1,324,954.74 232,992.18
1,557,946.92

FTWARE .
AND IP TELEPHONE INSTRUMENTS.
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU
SUBJECT:CCTV WORKS

SL.NO

6
 7

10

11

12

13

II

III
PROJECT: VSLC PH1 , INCOM TENANT ,POLLIVAKKAM , TAMIL NADU
SUBJECT:CCTV WORKS

CCTV WORKS
DESCRIPTION OF WORK

Supply, Installation, Testing & Commissioning of Indoor type 4MP IP Fixed

Bullet Camera 1/3" Progressive Scan CMOS, Lens 2.6mm/4mm,
Smart Supplement Light-30Mtr. Power supply to be taken from Ethernet cable via POE switch.

Supply, Installation, Testing & Commissioning of Outdoor type 4MP IP Fixed

Bullet Camera 1/3" Progressive Scan CMOS, Lens 2.6mm/4mm,
Smart Supplement Light-30Mtr. Power supply to be taken from Ethernet cable via POE switch.

Supply, Installtion & Commissioing of IP Fixed Dome Camera [2mp], 1/3" CMOS, 1080P
resolution, 1920 x 1080P pixel @ 25/30fps, motorised Vari-focal focal length 2-9mm Auto
Iris, , 0.1lux, Day night, PoE, SD card Tampering Detection , , UL Listed Celing Mounted
Type Power supply to be taken from Ethernet cable via POE switch. The camera shall be on
H.264 compression.

Supply, Installation, Testing & Commissioning of 16Ch NVR with

4MP support for connecting the 4MP cameras and 4 SATA HDD

Supply, Installation, Testing & Commissioning of 2TB hard disk for

30 days recording

Supply, Installation, Testing & Commissioning of Video monitoring

Work station: i7, 32GB RAM, 1TB HDD, Min 4GB Graphics
Card,Windows and 19 inches LCD Monitor .
Supply, Installation, Testing & Commissioning of VMS- video
monitoring software from OEM for 15 camera license and scabale upto 50 license in future

Supply, Installation, Testing & Commissioning of 5 Mtr HDMI

connectivity with full HD support

Supply, Installation, Testing & Commissioning of 8 Port POE Switch

10/100/1000 Base-T auto-sensing PoE+ 2 dedicated 100/1000 Base-
X Fiber SFP ports,

Supply, Installation, Testing & Commissioning of RJ 45 connector

Supply, Installation, Testing & Commissioning of Patch chord- Cat

6 Patch Cord U/UTP1 mtr

Supply, Installation, Testing & Commissioning of CAT-6 UTP

UnArmoured flexiable cable.

Supply, Installation, Testing & Commissioning of 25mm PVC

Conduit with 2mm thick

BASIC TOTAL FOR CCTV WORKS

ADD: GST @ 18%

TOTAL FOR CCTV WORKS WITH TAXES

 SUPPLY
QUANTITY UNIT SUPPLY AMOUNT
RATE

8 Nos 20,000.00 160,000.00

1 Nos 25,000.00 25,000.00

3 Nos 15,000.00 45,000.00

1 Nos 50,000.00 50,000.00

6 Nos 10,000.00 60,000.00

1 Nos 125,000.00 125,000.00

 1 Nos 100,000.00 100,000.00

1 Nos 1,500.00 1,500.00

3 Nos 35,000.00 105,000.00

15 Nos 450.00 6,750.00

15 Nos 250.00 3,750.00

1500 Mtrs 40.00 60,000.00

1500 Mtrs 30.00 45,000.00

787,000.00

141,660.00

928,660.00
DATE 3/29/2025
REVISON R0

ERECTION ERECTION
RATE AMOUNT

500.00 4,000.00

500.00 500.00

250.00 750.00

500.00 500.00

500.00 3,000.00

1,500.00 1,500.00
5,000.00 5,000.00

150.00 150.00

500.00 1,500.00

100.00 1,500.00

100.00 1,500.00

100.00 150,000.00

10.00 15,000.00

184,900.00

33,282.00

218,182.00
1,146,842.00
 HVAC BOQ-R0
PROJECT- VSLC (PRODUCTION)
Date : 29.03.2025
Supply Installation
SL No Description Unit Qty
Rate Amount Rate Amount

1 AIR HANDLING UNIT WITH SUPPLY OF VFD CONTROL PANEL

Supply, Installation, Testing & Commissioning & Handing over of the following:
AIR DISTRIBUTION EQUIPMENT
Supply, installation, testing & commissioning of Double skin construction draw thru type FLOOR
MOUNTED AIR HANDLING UNITS. Refer Equipment schedule for details
Casing: - Double Skin wall panels, 50 mm thick sandwich PUF injected panels. Outer skin shall be 0.6
mm pre plasticized or powder coated GSS sheet. Inner sheet shall be 0.6 mm plain GSS. Extruded
Aluminum corners.,Complete with Glass view panel, motor guard, marine light, limit switch,UV lamp,
cable entry, GSS base frame. Screw less construction with zero leakage in the panel joints. Inspection
door for all the sections.

Fan: PLUG TYPE , Motor shall be suitable for Variable Frequency Drive along with spring Isolators and
415±10% volts, 3 phase AC supply, Frequency range shall be 10% to 100%. The harmonic levels in the
VFD shall not exceed the limits specified in IEEE 519 Standards(fan make:Ziehl-Abegg,Kruger)

Coil : DX cooling coil, 6 Row deep coils, Aluminum fins with Hydraufillic coating, coil size shall be
selected for a maximum face velocity of 500 feet/minute. Coils shall have automatic air vents, the vent
outlets beings piped to the drain pan with a copper pipe. drain cock with valve. Coil shall be Cu.header
and Ms adopter with end flange. 20% Cushion should be considered in coil selection.

Filter: Each unit shall be provided with a factory assembled filter section containing washable synthetic
type air filters media, class EU3 (MERV 8) mounted on Aluminum Frame. Filter bank framework shall be
fully sealed and constructed from GSS. The efficiency of the filters shall be 90%down to particle size of
20+10+5 microns as per IS 7613, and ASHRAE 52.1.AHU shall be supplied with one set of pre
commissioning filters

Fine filter section containing Synthetic or Glass fiber or FPCP media, class F8, equivalent to EU7
(MERV 13) of ASHRAE 52.2 1999 .The efficiency of the filters shall be 95% down to particle size of 5
microns as per IS 7613, and ASHRAE 52.1.
5 KW Finned Tubular / Strip Electrical Heater with thyristor controller, Sheathed in S.S. 304, with G.I fins
Filled with MGO as an insulating material & Kanthal-D as a resistance wire With Mounting Bracket
suitable for ahu installation inside AHU. Electrical should be IP-44 Indoor type Non-Compartmental Power
Supply Feeder Panel for Heaters for above KW rating.Humidistat for RH sensing,Electric Power, Control
Cable Copper 1x6sqmm cable for earthing strip nearest earthpit/strip.

Floor Mounted Air Handling unit complete with all sections as specified in technical specifications, 65
mmwg static, 6 row cooling coil, Fan motor with IE - 3 efficiency, filters with pre filter section & fine
filters, 1 set of spare pre-filters apart from 1 set of commissioning filters fixed in the units. ALL FANS
SHOULD BE AMCA CERTIFIED.
Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional.
Contractor to calculate static pressure based on final approved construction drawing and pressure drop of
finalized Equipment / Items and submit for review / approval to the consultants. The procurement shall be
processed only after duly verification / approval of calculation and selection from the consultants.

The Units should come with Motorized ON/OFF damper

Noise Level: Contractor to ensure noise level < 60 dBA from 1mts distance .
Ground Floor
AHU - 1, 45 TR - 8000 CFM - 65mm ESP FLOOR MOUNTED AIR HANDLING UNITS.
a SHOP FLOOR. 2mtrs Length of suitable copper cable is included in scope . QTY 1 915000 915000 25000 25000

b AHU EXPANTION KIT QTY 1 45000 45000 6000 6000

Supply of VRF Outdoor Units Cooling only Model side discharge, with scroll inverter based compressors.
Refrigerant R-410A to be used. cooling mode, low noise inverter based condenser fans, microprocessor
panel as per requirement of sequential starting of VRF unit, coils, expansion valves, single phase
2 preventor, all vibration isolators, safeties etc. In the event of one compressor failure other compressor
shall provide its minimum rated capacity,.2mtrs Length of suitable copper cable is included in scope .
- Voltas,bluestar,daikin Make

(Note: Refrigeration Capacities indicated below are actual capacity. Selection to be done
considering derating at @ 41°+2C.), the refrigenrent topup for commissioning of
vrf units is included in the quote
a 18HP Top discharge QTY 3 655000 1965000 30000 90000

Part -A(Equipments(high side)) 2925000 121000

Refrigerant "Y" / "T" joints with insulation, as recommended by Manufacturer,

1 Nos 2 4000 8,000 500 1,000
suitable for the combination of indoor and outdoor machines quoted.

Supply, installation, testing and commissioning of 18G Hard drawn

refrigerant liquid piping using eddy current free Copper pipes and fittings like
elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports
consisting of GI box / "C" sections & female anchor fasteners with full threaded GI
2 rods, insulation of pipes using 13 mm thick class O with Aluminium foil upto 19 mm
copper Pipes & 19 mm thick class O with Aluminium foil from 19 mm Copper pipes
elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire
properties with aluminium foil , structural clamps with hard PVC pipe sleeves under
the clamps to protect insulation at supports.
a 15.9 mm (5/8") dia with 13 mm thick insulation Rmt 12 713 8556 190 2280
b 19.05 mm (3/4")dia with 19 mm thick insulation Rmt 30 1264 37920 190 5700
c 22.22 mm (7/8") dia with 19 mm thick insulation Rmt 0 1411 0 210 0
d 28.6 mm (1 1/8") dia with 19 mm thick insulation Rmt 12 1735 20820 210 2520
e 34.9 mm (1 3/8") dia with 19 mm thick insulation Rmt 0 2430 0 250 0
f 41.3 mm (1 5/8") dia with 19 mm thick insulation Rmt 30 2820 84600 250 7500

3 Supply and Installation of CPVC Drain Pipe With 9mm Insulation

b 32mm Dia Rmt 0 950 - 150 0
c 40mm Dia Rmt 15 1150 17,250.00 150 2250

Supply and Installation of 4x2.5 Sqmm Copper Flexible Communication

4 Rmt 100 350 35000 90 9000
Cable with GI Conduit

5 Supply and Installation of 4x4 Sqmm Copper control cable Rmt 85 410 34850 90 7650

6 MS Structure support for VRF ODU Nos 3 15000 45000 5000 15000

7 Refrigerant topup Kg 60 1100 66000 60 3600

Part -B(Piping works) 357,996 56,500

1 SHEET METAL DUCTING & ASSOCIATED WORKS - Make: Zeco / Rolastar / Veda
Supply, Installation, Testing & Commissioning of Galvanizing shall be Class VII – light
coating of zinc, nominal 120 gsm / sqm surface area and Lock Forming Quality prime
material alongwith mill test certificates. In addition, if deemed necessary, samples of raw
material, selected at random by owner’s site representative shall be subject to approval
and tested for thickness and zinc coating at contractor’s expense.All duct construction
and installation shall be in accordance with SMACNA standards. In addition ducts shall
be factory fabricated utilizing the following machines to provide the requisite quality of
ducts.All ducts shall be fabricated and installed in workman like manner, conforming to
relevant SMACNA codes.
1.1 24 G Ducting Sqm 530 1030 545,900 200.00 106,000.00
1.2 22 G Ducting Sqm 250 1130 282,500 200.00 50,000.00
1.3 20 G Ducting Sqm 30 1260 37,800 200.00 6,000.00
1.4 18 G Ducting Sqm 10 1610 16,100 210.00 2,100.00
1.5 Gripple wire support and necessary accessories for Duct installation Lot 1 500,000 75,000.00

2 JET DIFFUSER (EYE BALL NOZZLE)

Supply installation of Jet diffuser in aluminium powder coated construction for minimum

throw of 8.0 Mt. Jet diffuser shall be complete with volume control damper .
a 315mm dia Rmt 0 6,740.00 - 350.00 -
b 250mm dia Rmt 60 4,590.00 275,400 350.00 21,000.00
c 200mm dia Rmt 0 4,400.00 - 350.00 -

3 Air Terminal Devices - Make: Airmaster/ System air / Cosmos

Supply,installation,testing & balancing of extruded aluminium powder coated Return air
a grilles with normal 0° deflection with all sides flanged without collar dampers.( colour Sq.m 6 11000 66,000 1800 10,800.00
for the grill to be conifremed by Arch/ PMC team before placing the order)

Supply, Installation, Testing & Commissioning of Gear type Volume Control Dampers
4 made out of 100 x 40 x 1.55 mm thick galavanised steel frame and blades of 1.55 mm Sqm 1 6,800.00 6,800 1,500.00 1,500.00
galavanised sheet steel.

Supply, Installation, Testing & Commissioning of Motoraised Fire dampers of CBRI

certificate for supply & return air ducts(Multi leaf ruskin type).For further details refer
5 Sqm 0.8 11,500.00 9,200 2,000.00 1,600.00
technical specs.Flages also needs to be considered for all dampers.Make: Airmaster/
Systemair/ Raskin Titus

Supply, Installation, Testing & Commissioning of Belimo Actuators with Control Panel
6 Nos 2 10,500.00 21,000 2,500.00 5,000.00
forabove fire dampers- HIGH TORQUE TYPE

DUCT INSULATION MATERIALS

Supply,Installation,testing & commisioning of 16 mm Thick Accoustic Duct liner
(Insulation) of specified thickness of Elastromeric Rubber Insulation manafactured as
per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for
air distribution system which should not absorbs less 0.2% water by volume (ASTM c
209), should not support microbial growth (ASTM C1071, G21, G22) and should emit
7 Sqm 150 560.00 84,000.00 150.00 22,500.00
objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R -
2.78 in 3.4" thickness) and water vapor permeance of 0.10. - Class "1" Material-All
joints of the Insulation material should be further covered with 50 mm wide 3 mm thick
self adhesive tape made of similar material & Black Cotton Tape shall not be used.
(insulation should be with low VOC content) Make: Arma flex / K Flex

Supply,Installation,testing & commisioning of 19 mm Thick Thermal Insulation of

specified thickness of Silver Elastromeric Rubber Insulation manafactured as per ASTM
E 84 test & which should also meet NFPA 90A supplementary materials for air
distribution system which should not absorbs less 0.2% water by volume (ASTM c 209),
should not support microbial growth (ASTM C1071, G21, G22) and should emit
8 Sqm 730 450.00 328,500.00 150.00 109,500.00
objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R -
2.78 in 3.4" thickness) and water vapor permeance of 0.10. Joints should be sealed
with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable).
Class "O" Material-(insulation should be with low VOC content) Make:Arma flex / K
Flex

9 Suply and installation of the MS support for duct/pipe support KG R0 95.00 25.00

10 Room Side magnehelic gauge for differntial pressure indication

Supply, installation, testing and commissioning of magnehelic gauge for room
differntial pressure indication.Range- 0-25 Pascal
Nos 1 7,000.00 7,000.00 800.00 800.00

11 Display Units for AHU filter differential pressure monitoring.

Supply, installation, testing and commissioning of Strobe Hooter for AHU pre & fine
filter differential pressure monitoring. . Display shall generate audio & visual alarm in
case of DP reaches up to peak level. Alarm acknowledgement shall be provided on
tower lamp.
Differential Pressure Switch for AHU Filter.
1. Accuracy:±1% F.S.O.
2. Operating Conditions:0 - 70˚C (32 - 158˚F), 10 - 90% RH non-condensing
3. Output Signal: ON/OFF (3-wire), switch selectable Nos 1 3,500.00 3,500.00 800.00 800.00
4. Power Supply: 20 - 28 Vac/dc
5. Range : 0-400 PA DPS shall be interlocked with Strobe Hooter indication.

12 Strobe Hooter (Alarm acknowledgement required on Strobe Hooter.) Nos 1 1,200.00 1,200.00 500.00 500.00

13 Field Devices
Return Air Duct Temperature & RH transmitter
1. Humidity Sensor: Thermoset Polymer based capacitive
2. Temperature Sensor: 1000 Platinum
3. T & RH Accuracy: ± 0.2°C & ± 2 %
4. Output Signal : 4-20mA current loop, 0-5 V DC or 0-10 V DC Nos 1 9,500.00 9,500.00 800.00 800.00
5. Power Supply: 18 to 35 V DC, 15 to 26 V AC
6. Temperature Range : -10-50°C, RH range : 0-100 %

TRH Sensor in Non Flameproof construction-for room conditions monitoring

Test cell Rooms Temperature & RH Indicator/transmitter (Display)
1. Humidity Sensor: Thermoset Polymer based capacitive
2. Temperature Sensor: 1000 Platinum
3. T & RH Accuracy: ± 0.2°C & ± 2 %
13.1 Nos 1 15,500.00 15,500.00 800.00 800.00
4. Output Signal : 4-20mA current loop, 0-5 V DC or 0-10 V DC
5. Power Supply: 18 to 35 V DC, 15 to 26 V AC
6. Temperature Range : -10-50°C, RH range : 0-100 %

Duct Temperature sensor along with transmitter

1. Temperature Sensor: 1000 Platinum
2. T Accuracy: ± 0.2°C
13.2 3. Output Signal : 4-20mA current loop, 0-5 V DC or 0-10 V DC Nos 1 14,500.00 14,500.00 1,000.00 1,000.00
4. Power Supply: 18 to 35 V DC, 15 to 26 V AC
5. Temperature Range : -10-50°C

14 T Sensor in Non Flameproof construction-for supply air outlet monitoring Nos 1 1,100.00 1,100.00 500.00 500.00

Supply, Installation of Conventional Multi Sensor Smoke Detector with NO/NC Contact
15 Sensor shall be compatible to installed in room. Nos 1 1,500.00 1,500.00 550.00 550.00
(Duct mounted smoke detector is required)

16 Fresh air louvers

Fresh air intake louvers in 20 G extruded aluminium construction frame with 18 G extruded
aluminium blades, bird screen, rain cowl, G-3 type Pre filters of 80-90% down to 15-20 Sq
micron & necessary supporting arrangement. Louver will be provided with HDPE wire mesh mtr
0.8 14,300.00 11,440.00 900.00 720.00
of 6.35 X 6.35 mm (i.e. 0.8 mm wire dia)

Part -C (Sheet metal works) 2,238,440 417,470

VALIDATION & DOCUMENTATION

Validation of all systems, HVAC qualification documents DQ / IQ / OQ / PQ / OQ as per
international norms for all areas of scope of work.
Submission of Operation Manuals & arrangement training session for operators.
1) Provide certificates of all brought items for documentationDQ / IQ / OQ / PQ.
2) Collect & record of all other agencies certificates of all brought items for complete
HVAC validation work.
1 Lot 1 130000 130000
1. Temperature at the outlet of jet/grills
2. Air velocity & system balancing
3. Duct leakage testing during duct Installation. (reports to be submitted)

Part -D(Validation & documentation) - 130,000

Total A+B+C+D 5,521,436 724,970

 MINIMUM LIST OF DOCUMENTS
1 Installation / Commissioning reports
2 GA Diagram with specification of AHU & other equipement
3 AHU certification with respect to MOC, Insulation, Leak test
4 Electrical Drawings
5 As build Ducting Drawings
6 Ducting material and leak test certificate
7 Duct Passivation certificate
8 AHU manual
9 Pressure Switch manuals/Booklets
10 VFD manual
11 Blower test certificate
12 Blower curves
13 Filter certificate
14 Motor test / warrantee certificate
15 Cooling water coil test report
16 Fire damper test report
17 Instruments calibration certificates
18 Factory test certificate
 HVAC BOQ-R0
PROJECT- VSLC OFFICE
Date : 28.03.2025
Supply Installation
SL No Description Unit Qty
Rate Amount Rate Amount

1 VRF TYPE MODULAR TYPE CASSETTE UNITS

Supply, installation, testing & commissioning of Ceiling mounted 4way-Cassette type unit. The Cassette
unit shall have necessary filters, cooling coil, fan, fan motor, Condensate drain pump, decorative panels,
cordless / corded (as required) digital remote control unit etc., The unit shall be provided, supports,
isolators,etc.,2mtrs Length of suitable copper cable is included in scope .
a 1.5TR - VRF Cassette unit(Conference room and work station) QTY 4 65000 260000 2000 8000
b 1.0TR - VRF Cassette unit (Meeting room 1&2) QTY 2 51000 102000 2000 4000

2 DX Inverter type - Hiwall units

Supply of Wall Mounted DX -Hi-wall Units with inverter compressor to maintain 24±1° C indoor condition
inside the Room.unit shall have necessary filters, cooling coil, fan, fan motor,cordless / corded (as
required) digital remote control unit etc.Shall be quoted IDU +ODU and Auto sequence panel.2mtrs
Length of suitable copper cable is included in scope .
a 0.8 TR- Hi-wall Unit - Battery room 3 star rated inverter (1W+1S) QTY 2 38000 76000 2500 5000
b 0.8 TR- Hi-wall Unit - Server 3 star rated inverter (1W+1S) QTY 2 38000 76000 2500 5000

Supply of VRF Outdoor Units Cooling only Model side discharge, with scroll inverter based compressors.
Refrigerant R-410A to be used. cooling mode, low noise inverter based condenser fans, microprocessor
panel as per requirement of sequential starting of VRF unit, coils, expansion valves, single phase
4 preventor, all vibration isolators, safeties etc. In the event of one compressor failure other compressor
shall provide its minimum rated capacity,.2mtrs Length of suitable copper cable is included in scope .
- Voltas,bluestar,daikin Make

(Note: Refrigeration Capacities indicated below are actual capacity. Selection to be done
considering derating at @ 41°+2C.), the refrigenrent topup for commissioning of
vrf units is included in the quote
a 10HP Side discharge QTY 1 235000 235000 15000 15000

Part -A(Equipments(high side)) 749000 37000

Refrigerant "Y" / "T" joints with insulation, as recommended by manufacturer,

1 Nos 5 4000 20,000 750 3,750
suitable for the combination of indoor and outdoor machines quoted.

Supply, installation, testing and commissioning of 18G Hard drawn

refrigerant liquid piping using eddy current free Copper pipes and fittings like
elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports
consisting of GI box / "C" sections & female anchor fasteners with full threaded GI
2 rods, insulation of pipes using 13 mm thick class O with Aluminium foil upto 19 mm
copper Pipes & 19 mm thick class O with Aluminium foil from 19 mm Copper pipes
elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire
properties with aluminium foil , structural clamps with hard PVC pipe sleeves under
the clamps to protect insulation at supports.
a 6.4 mm(1/4") dia with 13 mm thick insulation Rmt 80 360 28800 190 15200
b 9.5 mm(3/8") dia with 13 mm thick insulation Rmt 65 478 31070 190 12350
c 12.7 mm (1/2") dia with 13 mm thick insulation Rmt 80 593 47440 190 15200
d 15.9 mm (5/8") dia with 13 mm thick insulation Rmt 10 713 7130 190 1900
e 19.05 mm (3/4")dia with 19 mm thick insulation Rmt 25 1264 31600 190 4750
f 22.22 mm (7/8") dia with 19 mm thick insulation Rmt 35 1411 49385 210 7350

3 Supply and Installation of CPVC Drain Pipe With 9mm Insulation

a 25mm Dia Rmt 40 650 26,000.00 150 6000
b 32mm Dia Rmt 25 950 23,750.00 150 3750

Supply and Installation of 4x2.5 Sqmm Copper Flexible Communication

4 Rmt 250 350 87500 90 22500
Cable with GI Conduit

5 Supply and Installation of 4x4 Sqmm Copper control cable Rmt 230 410 94300 90 20700

6 MS Structure support for VRF ODU Nos 1 15000 15000 5000 5000

7 MS Structure support for DX ODU Nos 4 6500 26000 2000 8000

8 Refrigerant topup Kg 10 1100 11000 60 600

Part -B(Piping works) 498,975 127,050

Circular ducts for Decorative exhaust air fan out of 24 G GI Ducts shall be supported by
cable supports along with suitable rubber sleeves. Ducts to be painted as per architect
1
approved colour. Cost shall include supports,duct end connection with wire mesh to be
provided.
a 150mm dia Rmt 10 1,550.00 15,500 350.00 3,500.00

2 Decorative Exhaust fan - Make: Airmakin/ System air / Crompton

Supply,installation,testing & balancing of decorative exhaust fan for the Pantry The anti-
rust metal blades of the exhaust fan make them resistant to rust, increasing the
a
durability and longevity of the fan.silent and vibration-free performance of the exhaust
fan( colour for the fan to be conifremed by Arch/ PMC team before placing the order)
150cfm with 5mm static Nos 1 1800 1,800 450 450.00

3 Propeller Exhaust fan - Make: Airmakin/ System air /Kruger

Supply, Installation, Testing and Commisioning of flame proof propeller fan operating on
single 220V±6%/50Hz phase. for Toilet room exhaust of below capacity. The prices should
include support required for mounting.Gravity louvers to be provided with each fan
a 100 cfm Nos 10 2200 22,000 450 4,500.00

Auto sequence panel, Flexible, custom cable length, tracks,Switching time is 10 second with
an Operating Voltage 130V to 280V,Temper proof and maintenance free, powder coated
4 box.Microcontroller based technology with Pre Program interlocking to prevent short circuit Nos 2 18,000.00 36,000.00 3,000.00 6,000.00
shall be quoted cables . for dx hiwall units (Server room+ASRS room)

Part -C (Low side works) 75,300 14,450

Total A+B+C 1,323,275 178,500