Scribd
Upload
7 views1 page

E30CC data sheet

The ESPOT 30CC data sheet provides detailed specifications including total thickness, material composition, and temperature resistance. It highlights the cover materials, special characteristics such as FDA compliance, and support surface details. Additionally, it outlines splicing parameters and manufacturing capabilities.

Uploaded by

hangphanbl91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views1 page

E30CC data sheet

The ESPOT 30CC data sheet provides detailed specifications including total thickness, material composition, and temperature resistance. It highlights the cover materials, special characteristics such as FDA compliance, and support surface details. Additionally, it outlines splicing parameters and manufacturing capabilities.

Uploaded by

hangphanbl91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ESPOT 30CC - Data Sheet

STRUCTURE

Total Thickness 6.20 mm


Nº of plies 3
Fabric Polyester
Weft Flexible
Weight 7.70 kg/m2
Constant Temp. ºC -15 / 80
Intermittent Temp. ºC -25 / 100
Top cover PROFILES APPLICATION
Thickness 2.00 mm Profiles on top cover Yes
Material PVC Profiles on bottom cover Yes
Colour White 00 Runer sidewalls Yes
Surface Smooth
Hardness 73 ShA
SPECIAL CHARACTERST.
Internal cover
FDA Food
Material PVC EU food (Regulation EU 10/2011)
Bottom cover Antistatic
Thickness 1.00 mm Limited resistance to animal oils & greases
Vegetal oils & greases resistant
Material PVC
ATEX
Colour White 00
Surface Smooth
Hardness 73 ShA

SUPPORT SURFACE

TENSIONS N/mm Slider bed No


Breaking load 300 Rollers Yes
Working load 1% elongation 30 Troughed application Yes
Max. load at 1.5% elong. 40
FRICTION COEFF. BOTTOM COVER

MIN. DRUM DIAMETER mm On steel Din/Est. 0.00 / 0.00


On wood Din/Est. 0.00 / 0.00
Flexing [F] 200 On plastic Din/Est. 0.00 / 0.00
Back flexing [C] 250

REMARKS

FASTENERS Longitudinal splice Yes


MR3 , RS-187 , TIPO B
Max. manufacturing width 2000 mm
Last Modified 30/08/2010

SPLICING PARAMETERS (Stratified fibreglass sheets, not metal)

Pressure Sup. Temp. Inf. Temp.


Splice Min time Top cov. Flomil / Film Intern. Flomil Sheet
Kp/cm2 ºC ºC
DG (Recommend) 2.00 175 175 8 EBL00 ITR00 4

The splice parameters are for orientation only as they depend on the type of press and the thickness of the sheets used. We recommend carrying out a trial run with pieces of the same
belt before splicing the belt itself.
Time starts when the press has reached the stated temperature.

You might also like