Scribd
Upload
4 views

vpc and vdc

The document outlines the configuration steps for enabling LACP and VPC features, establishing a VPC peer link, and checking VPC status. It explains the maximum number of Virtual Device Contexts (VDCs) that can be created depending on the supervisor engine, with specific commands for checking VDC status and managing ports. Additionally, it details how to switch between VDCs and perform administrative tasks within the default VDC.

Uploaded by

rajputarvindkumar64
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4 views

vpc and vdc

The document outlines the configuration steps for enabling LACP and VPC features, establishing a VPC peer link, and checking VPC status. It explains the maximum number of Virtual Device Contexts (VDCs) that can be created depending on the supervisor engine, with specific commands for checking VDC status and managing ports. Additionally, it details how to switch between VDCs and perform administrative tasks within the default VDC.

Uploaded by

rajputarvindkumar64
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Once fex enable the lacp and vpc feature

Once peer keep alive is success then rest config vpc peer link
Check the vpc status

Now config vpc for fex and sever


VDC

Maximum no. vdc depend upon the supervisor engine

If u have sup 1 then u can create upto 4 vdc …..vdc 1 is default

If u have sup 2 then u can create upto 5 vdc …..vdc 1 is default

Check this by below command

How to check which port is part of which vdc


VDC actually create virtualize environment for switching and routing… user will think that they are
connected to a different switch but in actual they are on same physical chassis.

Sh interface status….o/p show only vdc 1 interfaec

How to move in other vdc

Switch back command use to come in default and if u r network admin then u can change in vdc
otherwise not

There certain command or thing only done in default vdc like license and upgrade.
How to delete vdc

How to assign port in vdc

You might also like