Guardfin Brochure en 240619 Opt
Guardfin Brochure en 240619 Opt
“GUARDFIN” is a residual chlorine analyzer that is essential for all kinds of water quality management.
It is a cutting-edge product that allows continuous accurate measurement values to be monitored online.
Drinking Food
Pharmaceutical
water /beverage Power plant
manufacturing
treatment manufacturing
WATERFIN
KEY FEATURES
Guardfin was created based on chlorine water treatment expertise accumulated over 20 years.
The clogging of the reagent supply tube, which was a problem with existing sensors from other
companies, has been improved on Guardfin, and device stability has been improved with the low-
power design of the system. It can be applied to a variety of industrial fields as it can quickly and
stably measure residual chlorine at low and high concentrations.
TECHNICAL DATA
Measuring Range 0 ~ 15 mg/L (ppm) Flow Rate Sample output: 40~340 mL/min
Accuracy Apply larger value of ±5% or Bypass output: 30~140 mL/min
±0.03mg/L(ppm) in range of 0.00~6.00mg/L Materials (those Tygon, Polyurethane, C-Flex ULTRA, PTFE,
±10% in range of 6.01~15.00mg/L sample flow Polypropylene, Polyethylene, Quartz Glass,
Resolution 0.01mg/L (ppm) pass through) Stainless Steel
Measuring TIme 45~600sec Controlable (up to Flow Rate) Temp Range 0℃~55℃(32℉~131℉)
Display 113x85mm(3.2”), TFT LCD Display (Color) Power Supply 100 to 240VAC, 0.7A, 50~60Hz
Analog Output Powered 4~20mA, 600Ω, Isolated Reagent Life 60days at 0℃~40℃(32℉~104℉)
Alarm Signal Two N.O. Type S.S.R. / 240VAC, 2A Surrounding Recommended for indoor use
Com Ports Bi-Directional RS-485 with Modbus Insulation Anti-Short Circuit Insulation, Pollution
Degree 2, Overvoltage Category III
Water Pressure Pressure Reducing Valve Control
0.34bar (5.0PSI) to 5bar(72.5PSI) Protection Degree IP55
Working Temp. 0℃~60℃(32℉~140℉) Weight 5.3Kg
DIMENSIONS
Power
Air vent
GUARDFIN
RS-485
ONLINE
CHLORINE ANALYZER
4-20mA
By pass
Water Inlet
Drain
Emergency Cabinet
Drain
GND
By pass
Water Inlet
Drain
Emergency Cabinet
Drain
GND
● CE certified This is to certify that a representative of this Bureau did, at the request of
Manufactured at
Address
:
:
WATERFIN INC.
Rm. 3301 beon-yeong-gwan, 136, Jiksan-ro,
Jiksan-eup, Seobuk-gu, Cheonan-si,
WATERFIN SEONGNAM FACTORY Chungcheongnam-do, Republic of Korea
Description : The product allows for the reading of the Total
●
classification procedures required by ABS Rules for products to be installed in ABS classed vessels or facilities. This
certificate, by itself, does not reflect that the product is Type Approved. The scope and limitations of this assessment are atmosheres.
detailed on the pages attached to this certificate.
We declare that the product described above, to which this declaration of
Product: Chlorine and Total Residual Oxidant (TRO) Monitor conformity refer to , is in conformity with the essential requirements of
● Endorsements:
Tier: 3 - Type Approved, unit certification not required
Acceptance of product is limited to the "Intended Service" details prescribed in the certificate and as per applicable Rules and
Standards.
This Certificate is valid for installation of the listed product on ABS units which exist or are under contract for construction
● for non-ABS units is subject to agreement between the manufacturer and intended client.
by Korean Ministry of SMEs and Startups Yun-Sung Kim,Engineer/Consultant Test Report No.
Testing Location
:
:
CE2021-00061
Korea Testing Certification institute
Date of issue : 2021.07.06
WATERFIN INC.
Reagent Kits Copyrightⓒ 2024 WATERFIN INC. All rights reserved.
Cat. No. 50802 Total Chlorine Reagent Kit for Guardfin
6 x 50801 Packages per Kit Add : 1601~1602, 68 Digital-ro 9-gil,
Each Package includes; Geumcheon-gu, Seoul, 08512,
Cat. No. 50801-1 Total Chlorine Reagent DPD Republic of Korea
Cat. No. 50801-2 Total Chlorine Reagent Indicator
Cat. No. 50801-3 Total Chlorine Reagent Buffer Tel : +82-70-4304-4175 Fax : +82-70-8668-2668
Web : www.waterfin.com