Motherboard

ROG STRIX
B550-I
GAMING
 E17032
Revised Edition V2
June 2020

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional
data, you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.
1F., No. 15, Lide Rd.,
Beitou Dist., Taipei City 112
Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address [email protected], stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).

ii
Contents
Safety information....................................................................................................... iv
About this guide........................................................................................................... v
ROG STRIX B550-I GAMING specifications summary............................................. vi
Package contents......................................................................................................... x
Installation tools and components............................................................................ xi

Chapter 1: Product Introduction

1.1 Before you proceed.................................................................................... 1-1
1.2 Motherboard layout..................................................................................... 1-2

Chapter 2: Basic Installation

2.1 Building your PC system............................................................................ 2-1
2.1.1 CPU installation........................................................................... 2-1
2.1.2 Cooling system installation.......................................................... 2-2
2.1.3 DIMM installation......................................................................... 2-5
2.1.4 M.2 installation............................................................................. 2-6
2.1.5 Motherboard installation............................................................... 2-8
2.1.6 ATX power connection............................................................... 2-10
2.1.7 SATA device connection............................................................ 2-11
2.1.8 Front I/O connector.................................................................... 2-12
2.1.9 Expansion card installation........................................................ 2-13
2.1.10 Wi-Fi antenna installation........................................................... 2-14
2.2 BIOS update utility.................................................................................... 2-15
2.3 Motherboard rear and audio connections.............................................. 2-17
2.3.1 Rear I/O connection................................................................... 2-17
2.3.2 Audio I/O connections................................................................ 2-18
2.4 Starting up for the first time..................................................................... 2-21
2.5 Turning off the computer......................................................................... 2-21

Chapter 3: BIOS and RAID Support

3.1 Knowing BIOS............................................................................................. 3-1
3.2 BIOS setup program................................................................................... 3-2
3.3 EZ Update.................................................................................................... 3-2
3.4 ASUS EZ Flash 3......................................................................................... 3-3
3.5 ASUS CrashFree BIOS 3............................................................................. 3-4
3.6 RAID configurations................................................................................... 3-5

Appendix
Notices ..................................................................................................................... A-1
ASUS contact information....................................................................................... A-8

iii
 Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.

Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
• Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
• Your motherboard should only be used in environments with ambient temperatures
between 0°C and 40°C.

iv
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.

How this guide is organized

This guide contains the following parts:
• Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
• Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
• Chapter 3: BIOS and RAID Support
This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility
and support on RAID.

Where to find more information

Refer to the following sources for additional information and for product and software
updates.
1. ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware
and software products.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

v
 ROG STRIX B550-I GAMING specifications summary
AMD Socket AM4 for 3rd Gen AMD Ryzen™ Processors*
CPU
* Refer to www.asus.com for CPU support list.
Chipset AMD B550 Chipset
3rd Gen AMD Ryzen™ Processors
2 x DIMM, max. 64GB, DDR4 5100(O.C.) / 5000(O.C.) / 4800(O.C.) /
4600(O.C.) / 4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) /
3800(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3200 / 3000 /
Memory 2933 / 2800 / 2666 / 2400 / 2133 MHz, un-buffered memory*
Dual channel memory architecture
OptiMem II
* ECC memory(ECC mode) support varies by CPU.
** Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
1 x DisplayPort 1.4*
Graphics 1 x HDMI™ 2.1 (4K@60Hz)*
* Graphics specifications may vary between CPU types.
3rd Gen AMD Ryzen™ Processors
Expansion Slots
1 x PCIe 4.0 x16 slot (supports x16)
Total supports 2 x M.2 slots and 4 x SATA 6Gb/s ports
3rd Gen AMD Ryzen™ Processors
M.2_1 slot (Key M), type 2242/2260/2280
(supports PCIe 4.0 x4 & SATA modes)
Storage AMD B550 Chipset
M.2_2 slot (Key M), type 2242/2260/2280
(supports PCIe 3.0 x4 & SATA modes)
4 x SATA 6Gb/s ports
Support Raid 0, 1, 10
1 x Intel® I225-V 2.5Gb Ethernet
Ethernet
ASUS LANGuard
Intel® Wi-Fi 6 AX200
2x2 Wi-Fi 6 (802.11 a/b/g/n/ac/ax) support 1024QAM/OFDMA/MU-MIMO
Supports up to 2.4/5GHz transfer speed
Wireless & Bluetooth
Supports channel bandwidth: HT20/HT40/HT80/HT160
Bluetooth v5.1*
* BT 5.1 function will be ready in Windows 10 build 19041 or later.
Rear USB (Total 6 ports)
4 x USB 3.2 Gen 2 ports (3 x Type-A + 1 x USB Type-C®)
1 x USB 2.0 port (Type-A)
1 x USB 2.0 port (1 x audio USB Type-C®)
USB
Front USB (Total 5 ports)
1 x USB 3.2 Gen 2 front panel connector (supports USB Type-C®)
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
1 x USB 2.0 header supports additional 2 USB 2.0 ports

(continued on the next page)

vi
ROG STRIX B550-I GAMING specifications summary
ROG SupremeFX 7.1 Surround Sound High Definition Audio CODEC
S1220A
- Impedance sense for front and rear headphone outputs
- Jack-detection, Multi-streaming, Front Panel Jack-retasking
- High quality 120 dB SNR stereo playback output and 113 dB SNR
recording input
- Supports up to 32-Bit/192kHz playback*
Audio Audio Features:
- Audio Shielding
- Dual OP Amplifiers
- LED-illuminated audio jacks
- Rear audio USB Type-C® port
- Premium Japanese audio capacitors
* Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for
7.1-Channel audio.
4 x USB 3.2 Gen 2 ports (3 x Type-A + 1 x USB Type-C®)
1 x USB 2.0 port
1 x USB 2.0 port (1 x audio USB Type-C®)
1 x DisplayPort
Back Panel I/O Ports 1 x HDMI™ port
1 x ASUS Wi-Fi Module
1 x BIOS FlashBack™ button
1 x Intel® I225-V 2.5Gb Ethernet port
3 x LED-illuminated audio jacks
Fan and cooling related
1 x 4-Pin AIO_Pump header
1 x 4-Pin CPU Fan header
1 x 4-Pin Chassis Fan header
1 x VRM Heatsink Fan header
Power related
1 x 24-pin Main Power connector
Internal I/O connectors 1 x 8-pin +12V Power connector
Storage related
2 x M.2 slots (Key M)
4 x SATA 6Gb/s ports
USB ports
1 x USB 3.2 Gen 2 Front Panel connector (supports USB Type-C®)
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
1 x USB 2.0 header supports additional 2 USB 2.0 ports

(continued on the next page)

vii
 ROG STRIX B550-I GAMING specifications summary
Miscellaneous
1 x AURA Addressable Gen 2 header
1 x AURA RGB header
1 x Clear CMOS header
Internal I/O connectors
1 x Front Panel Audio header (AAFP)
1 x Speaker header
1 x 10-1 pin System Panel header
1 x Thermal Sensor header
ASUS Q-Design
- ASUS Q-DIMM
- ASUS Q-LED (DRAM [yellow], CPU [red], VGA [white], Boot Device
[yellow green)
- ASUS Q-Slot
ASUS Thermal Solution
- Aluminum M.2 heatsink
ASUS EZ DIY
Special Features
- BIOS FlashBack™ button
- BIOS FlashBack™ LED
- ProCool II
- SafeSlot
Aura Sync
- Standard RGB header
- Addressable Gen 2 RGB header
Rear audio USB Type-C® connector
ROG Exclusive Software
- RAMCache III
- ROG CPU-Z
- GameFirst VI
Software Features - Sonic Studio III + Sonic Studio Virtual Mixer
- Sonic Radar III
- DTS® Sound Unbound
- Overwolf
- Anti-virus software

(continued on the next page)

viii
ROG STRIX B550-I GAMING specifications summary
ASUS Exclusive Software Features
Armoury Crate
- Aura Creator
- Aura Sync
- AI Noise Cancelling Microphone
AI Suite 3
- 5-way Optimization
TPU
EPU
DIGI+ VRM
Software Features
Fan Xpert 4
Turbo App
- EZ update
WinRAR
UEFI BIOS
ASUS EZ DIY
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
- ASUS UEFI BIOS EZ Mode
FlexKey
BIOS 256 Mb Flash ROM, UEFI AMI BIOS
Manageability WOL by PME, PXE
Operating System Windows® 10 - 64 bit
Mini-ITX Form Factor
Form Factor
6.7 inch x 6.7 inch (17 cm x 17 cm)

Specifications are subject to change without notice. Please refer to the ASUS website for
the latest specifications.

ix
 Package contents
Check your motherboard package for the following items.

Motherboard 1 x ROG STRIX B550-I GAMING motherboard

1 x Addressable RGB extension cable
1 x Panel cable
Cables
1 x ROG audio USB Type-C® cable
4 x SATA 6Gb/s cables
1 x Cable ties pack
1 x I/O Shield
1 x M.2 Mounting Kit
Miscellaneous 2 x M.2 SSD screw packages
1 x ROG Strix stickers
1 x ROG Strix thank you card
1 x ASUS 2x2 dual band Wi-Fi moving antennas
Installation Media 1 x Support DVD
Documentation 1 x User manual

If any of the above items is damaged or missing, contact your retailer.

x
Installation tools and components

Phillips (cross) screwdriver

PC chassis Power supply unit

AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan

DDR4 DIMM SATA hard disk drive

SATA optical disc drive (optional) Graphics card (optional)

M.2 SSD module (optional) 1 Bag of screws

The tools and components in the table above are not included in the motherboard
package.

xi
xii
Chapter 1: Product Introduction

Product Introduction
1

Chapter 1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or
change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in

the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.

ROG STRIX B550-I GAMING 1-1

 1.2 Motherboard layout
Chapter 1

1-2 Chapter 1: Product Introduction

 Layout contents Page
1. CPU socket 1-4
2. DIMM slots 1-5
3. Expansion slots 1-7

Chapter 1
4. Fan and Pump headers 1-8
5. VRM Heatsink Fan header 1-8
6. Power connectors 1-9
7. M.2 slot 1-10
8. SATA 6Gb/s port 1-12
9. USB 3.2 Gen 2 Front Panel connector 1-12
10. USB 3.2 Gen 1 header 1-13
11. USB 2.0 header 1-13
12. AURA Addressable Gen2 header 1-14
13. AURA RGB header 1-15
14. Clear CMOS header 1-16
15. Front Panel Audio header 1-17
16. System Panel header 1-18
17. Thermal Sensor header 1-19
18. Q-LEDs 1-19
19. BIOS FlashBack™ LED 1-20

ROG STRIX B550-I GAMING 1-3

 1. CPU socket
The motherboard comes with a Socket AM4 designed for 3rd Gen AMD Ryzen™ Processors.
Chapter 1

• The AM4 socket has a different pinout design. Ensure that you use a CPU designed
for the AM4 socket.

• The CPU fits in only one correct orientation. DO NOT force the CPU into the socket
to prevent bending the connectors on the socket and damaging the CPU.

• Ensure that all power cables are unplugged before installing the CPU.

1-4 Chapter 1: Product Introduction

2. DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.

A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO

Chapter 1
NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

Recommended memory configurations

ROG STRIX B550-I GAMING 1-5

 Memory configurations
You may install 4 GB, 8 GB, 16 GB, and 32 GB unbuffered and non‑ECC DDR4 DIMMs into
the DIMM sockets.

You may install varying memory sizes in Channel A and Channel B. The system maps
Chapter 1

the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.

• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.

• For system stability, use a more efficient memory cooling system to support a full
memory load or overclocking condition.

• Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.

• Visit the ASUS website for the latest QVL.

1-6 Chapter 1: Product Introduction

3. Expansion slots

Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.

Chapter 1

ROG STRIX B550-I GAMING 1-7

 4. Fan and Pump headers
The Fan and Pump headers allow you to connect fans or pumps to cool the system.
Chapter 1

• DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow
inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan headers!

• Ensure the cable is fully inserted into the header.

For water cooling kits, connect the pump connector to the AIO_PUMP header.

Header Max. Current Max. Power Default Speed Shared Control

CPU_FAN 1A 12W Q-Fan Controlled -
CHA_FAN 1A 12W Q-Fan Controlled -
AIO_PUMP 1A 12W Full-Speed -

5. VRM Heatsink fan header

The VRM Heatsink fan header is for connecting the VRM Heatsink fan on the
integrated heatsink.

1-8 Chapter 1: Product Introduction

6. Power connectors
These Power connectors allow you to connect your motherboard to a power supply.
The power supply plugs are designed to fit in only one orientation, find the proper
orientation and push down firmly until the power supply plugs are fully inserted.

Chapter 1
Ensure to connect the 8-pin power plug.

• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350 W.

• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.

ROG STRIX B550-I GAMING 1-9

 7. M.2 slot
The M.2 slot allows you to install M.2 SSD modules.
Chapter 1

• M.2_1 slot supports PCIe 4.0 x4 and SATA mode Key M design and type 2242 /
2260 / 2280 storage devices.

• M.2_2 slot supports PCIe 3.0 x4 and SATA mode Key M design and type 2242 /
2260 / 2280 storage devices.

• The M.2 SSD module is purchased separately.

• To install a 2242 storage device to the M.2_2 slot, use the bundled 2242 mounting
kit.

1-10 Chapter 1: Product Introduction

 To install a 2242 M.2 SSD module to M.2_2 socket:
1. Align the bigger hole on the mounting kit with the 2260 standoff and secure it
with a screw.
2. Install the 2242 M.2 SSD module to the M.2_2 socket.

Chapter 1
3. Secure the M.2 SSD module to the M.2_2 socket with a screw.

2 1

• For a 2242 storage device, use the bundled 2242 mounting kit.

• Before installing a 2242 M.2 SSD module, ensure that the mounting kit is properly
installed with the bigger screw hole on the 2260 standoff.

ROG STRIX B550-I GAMING 1-11

 8. SATA 6Gb/s ports
The SATA 6Gb/s ports allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
Chapter 1

If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration
through the onboard AMD B550 chipset.

• The slots are set to [AHCI] by default. If you intend to create a SATA RAID set using
these connectors, set the SATA Mode item in the BIOS to [RAID].

• Before creating a RAID set, refer to the RAID Configuration Guide. You can
download the RAID Configuration Guide from the ASUS website.

9. USB 3.2 Gen 2 Front Panel connector

The USB 3.2 Gen 2 connector allows you to connect a USB 3.2 Gen 2 module for
additional USB 3.2 Gen 2 ports. The USB 3.2 Gen 2 connector provides data transfer
speeds of up to 10 Gb/s.

The USB 3.2 Gen 2 module is purchased separately.

1-12 Chapter 1: Product Introduction

10. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for
additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer
speeds of up to 5 Gb/s.

Chapter 1
The USB 3.2 Gen 1 module is purchased separately.

11. USB 2.0 header

The USB 2.0 header allows you to connect a USB module for additional USB
2.0 ports. The USB 2.0 header provides data transfer speeds of up to 480 Mb/s
connection speed.

DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!

The USB 2.0 module is purchased separately.

ROG STRIX B550-I GAMING 1-13

 12. AURA Addressable Gen2 header
The Addressable Gen2 header allows you to connect individually addressable RGB
WS2812B LED strips or WS2812B based LED strips.
Chapter 1

The Addressable Gen2 header supports WS2812B addressable RGB LED strips (5V/
Data/Ground), with a maximum power rating of 3A (5V), and the addressable headers on
this board can handle a combined maximum of 500 LEDs.

Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.

• The addressable RGB LED strip will only light up when the system is powered on.

• The addressable RGB LED strip is purchased separately.

1-14 Chapter 1: Product Introduction

13. AURA RGB header
The AURA RGB header allows you to connect RGB LED strips.

Chapter 1
The AURA RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a
maximum power rating of 3A (12V).

Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is powered on.

• The LED strip is purchased separately.

ROG STRIX B550-I GAMING 1-15

 14. Clear CMOS header
The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM in
the CMOS, which contains the date, time, system passwords, and system setup
parameters.
Chapter 1

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.
2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.

DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or
placing a jumper cap will cause system boot failure!

If the steps above do not help, remove the onboard button cell battery and move the
jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the
button cell battery.

1-16 Chapter 1: Product Introduction

15. Front Panel Audio header
The front panel audio header is for a chassis-mounted front panel audio I/O module
that supports HD Audio. Connect one end of the front panel audio I/O module cable to
this header.

Chapter 1
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.

ROG STRIX B550-I GAMING 1-17

 16. System Panel header
The System Panel header supports several chassis-mounted functions.
Chapter 1

• System Power LED header (PLED)

The 2-pin header allows you to connect the System Power LED. The System Power
LED lights up when the system is connected to a power source, or when you turn on
the system power, and blinks when the system is in sleep mode.
• Storage Device Activity LED header (HDLED)
The 2-pin header allows you to connect the Storage Device Activity LED. The Storage
Device Activity LED lights up or blinks when data is read from or written to the storage
device or storage device add-on card.
• System Warning Speaker header (SPEAKER)
The 4-pin header allows you to connect the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
• Power Button/Soft-off Button header (PWRBTN)
The 3-1 pin header allows you to connect the system power button. Press the
power button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• Reset button header (RESET)
The 2-pin header allows you to connect the chassis-mounted reset button. Press the
reset button to reboot the system.

1-18 Chapter 1: Product Introduction

17. Thermal Sensor header
The Thermal Sensor header allows you to connect a sensor to monitor the
temperature of the devices and the critical components inside the motherboard.
Connect the thermal sensor and place it on the device or the motherboard’s
component to detect its temperature.

Chapter 1
The thermal sensor is purchased separately.

18. Q-LEDs
The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during
the motherboard booting process. If an error is found, the critical component’s LED
stays lit up until the problem is solved.

The Q-LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.

ROG STRIX B550-I GAMING 1-19

 19. BIOS FlashBack™ LED
The BIOS FlashBack™ LED lights up or blinks to indicate the status of the BIOS
FlashBack™.
Chapter 1

Please ensure to install the CPU to your ROG Strix B550-I Gaming motherboard to enable
BIOS FlashBack™.

1-20 Chapter 1: Product Introduction

Chapter 2: Basic Installation

Basic Installation
2.1 Building your PC system
2
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.

2.1.1 CPU installation

The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU
designed for the AM4 socket. The CPU fits in only one correct orientation. DO NOT force

Chapter 2
the CPU into the socket to prevent bending the connectors on the socket and damaging
the CPU!

Unplug all power cables before installing the CPU.

ROG STRIX B550-I GAMING 2-1

 2.1.2 Cooling system installation

Apply the Thermal Interface Material to the CPU

cooling system and CPU before you install the
cooling system, if necessary.

CPU heatsink and fan assembly Type 1

Chapter 2

2-2 Chapter 2: Basic Installation

CPU heatsink and fan assembly Type 2

Chapter 2
When using this type of CPU fan, remove the screws and the retention module only. Do
not remove the plate on the bottom.

ROG STRIX B550-I GAMING 2-3

 To install an AIO cooler

If you wish to install an AIO cooler, we recommend installing the AIO cooler after installing
the motherboard into the chassis.
Chapter 2

AIO_PUMP

CPU_FAN

CHA_FAN

2-4 Chapter 2: Basic Installation

2.1.3 DIMM installation

Chapter 2
To remove a DIMM

ROG STRIX B550-I GAMING 2-5

 2.1.4 M.2 installation
M.2_1 Socket (Top side)

1 8

7
2

1 8

6
Chapter 2

2-6 Chapter 2: Basic Installation

M.2_2 Socket (Bottom side)

Chapter 2

The M.2 is purchased separately.

ROG STRIX B550-I GAMING 2-7

 2.1.5 Motherboard installation
1. Install the I/O Shield to the chassis rear I/O panel.
Chapter 2

2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.

2-8 Chapter 2: Basic Installation

3. Place four (4) screws into the holes indicated by circles to secure the motherboard to
the chassis.

Chapter 2
DO NOT over tighten the screws! Doing so can damage the motherboard.

ROG STRIX B550-I GAMING 2-9

 2.1.6 ATX power connection
Chapter 2

Ensure to connect the 8-pin power plug.

2-10 Chapter 2: Basic Installation

2.1.7 SATA device connection

OR

Chapter 2

ROG STRIX B550-I GAMING 2-11

 2.1.8 Front I/O connector
To install the front panel connector To install USB 3.2 Gen 2 connector

USB 3.2 Gen 2

This connector will only fit in one

Chapter 2

orientation. Push the connector until it

clicks into place.

To install USB 3.2 Gen 1 connector To install USB 2.0 connector

USB 3.2 Gen 1

USB 2.0

To install front panel audio connector To install system speaker connector

AAFP

2-12 Chapter 2: Basic Installation

2.1.9 Expansion card installation
To install PCIe x16 cards

Chapter 2

ROG STRIX B550-I GAMING 2-13

 2.1.10 Wi-Fi antenna installation
Installing the ASUS 2x2 dual band W-Fi antenna
Connect the bundled ASUS 2x2 dual band Wi-Fi antenna connector to the Wi-Fi ports at the
back of the chassis.
Chapter 2

• Ensure that the ASUS 2x2 dual band Wi-Fi antenna is securely installed to the Wi-Fi
ports.

• Ensure that the antenna is at least 20 cm away from all persons.

The illustration above is for reference only. The I/O port layout may vary with models, but
the Wi-Fi antenna installation procedure is the same for all models.

2-14 Chapter 2: Basic Installation

2.2 BIOS update utility
BIOS FlashBack™
BIOS FlashBack™ allows you to easily update the BIOS without entering the existing BIOS
or operating system. Simply insert a USB storage device to the USB port (the USB port
hole marked in green on the I/O shield) then press the BIOS FlashBack™ button for three
seconds to automatically update the BIOS.

Please ensure to install the CPU to your ROG Strix B550-I Gaming motherboard to enable
BIOS FlashBack™.

To use BIOS FlashBack™:

1. Insert a USB storage device to the BIOS FlashBack™ port.

We recommend you to use a USB 2.0 storage device to save the latest BIOS version for
better compatibility and stability.

Chapter 2
2. Visit https://www.asus.com/support/ and download the latest BIOS version for this
motherboard.
3. Manually rename the file as SB550IG.CAP, or launch the BIOSRenamer.exe
application to automatically rename the file, then copy it to your USB storage device.

The BIOSRenamer.exe application is zipped together with your BIOS file when you
download a BIOS file for a BIOS FlashBack™ compatible motherboard.

4. Shut down your computer.

5. Press the BIOS FlashBack™ button for three seconds until the BIOS FlashBack™
LED blinks three times, indicating that the BIOS FlashBack™ function is enabled.

BIOS FlashBack™ port BIOS FlashBack™ button

6. Wait until the light goes out, indicating that the BIOS updating process is completed.

For more BIOS update utilities in BIOS setup, refer to the section Updating BIOS in
Chapter 3.

ROG STRIX B550-I GAMING 2-15

 • Do not unplug portable disk, power system, or short the CLRTC header while BIOS
update is ongoing, otherwise update will be interrupted. In case of interruption,
please follow the steps again.

• If the light flashes for five seconds and turns into a solid light, this means that the
BIOS FlashBack™ is not operating properly. This may be caused by improper
installation of the USB storage device and filename/file format error. If this scenario
happens, please restart the system to turn off the light.

• Updating BIOS may have risks. If the BIOS program is damaged during the process
and results to the system’s failure to boot up, please contact your local ASUS Service
Center.
Chapter 2

2-16 Chapter 2: Basic Installation

2.3 Motherboard rear and audio connections
2.3.1 Rear I/O connection

Chapter 2
Rear panel connectors
1. DisplayPort
2. Intel® I225-V 2.5Gb Ethernet port*
3. Wi-Fi 6 (802.11 a/b/g/n/ac/ax), Bluetooth V5.1
4. LED-illuminated audio jacks**
5. HDMI™ port
6. USB 2.0 port 3
7. BIOS FlashBack™ button
8. USB 3.2 Gen 2 ports 5 and 6
9. USB 3.2 Gen 2 port 3
10. USB 3.2 Gen 2 Type-C® port C4
11. Audio USB Type-C®
* and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions.

We strongly recommend that you connect your devices to ports with matching data
transfer rate. Please connect your USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports and
your USB 3.2 Gen 2 devices to USB 3.2 Gen 2 ports for faster and better performance for
your devices.

ROG STRIX B550-I GAMING 2-17

 * Intel® I225-V 2.5Gb Ethernet port LED indications
Activity Link LED Speed LED
ACT/LINK SPEED
LED LED
Status Description Status Description
OFF No link OFF No link
100 Mbps / 10 Mbps
GREEN Blinking Data activity OFF
connection
LAN port
GREEN Blinking Data activity GREEN 2.5 Gbps connection
GREEN Blinking Data activity ORANGE 1 Gbps connection

** Audio 2, 4, 5.1 or 7.1-channel configuration

Headset
Port 4-channel 5.1-channel 7.1-channel
2-channel
Light Blue Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Chapter 2

(Rear panel)
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
(Rear panel)
Pink Mic In Mic In Bass/Center Bass/Center
(Rear panel)
Lime – – – Side Speaker Out
(Front panel)

2.3.2 Audio I/O connections

Audio I/O ports

Connect to Headphone and Mic

2-18 Chapter 2: Basic Installation

Connect to Stereo Speakers

Connect to 2-channel Speakers

Chapter 2
Connect to 4-channel Speakers

ROG STRIX B550-I GAMING 2-19

 Connect to 5.1-channel Speakers
Chapter 2

Connect to 7.1-channel Speakers

2-20 Chapter 2: Basic Installation

2.4 Starting up for the first time
1. After making all the connections, replace the system case cover.
2. Ensure that all switches are off.
3. Connect the power cord to the power connector at the back of the system chassis.
4. Connect the power cord to a power outlet that is equipped with a surge protector.
5. Turn on the devices in the following order:
a. Monitor
b. External storage devices (starting with the last device on the chain)
c. System power
6. After applying power, the system power LED on the system front panel case lights
up. For systems with ATX power supplies, the system LED lights up when you press
the ATX power button. If your monitor complies with the “green” standards or if it has

Chapter 2
a “power standby” feature, the monitor LED may light up or change from orange to
green after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running,
the BIOS beeps (refer to the BIOS beep codes table) or additional messages appear
on the screen. If you do not see anything within 30 seconds from the time you turned
on the power, the system may have failed a power-on test. Check the jumper settings
and connections or call your retailer for assistance.

BIOS Beep Description

VGA detected
One short beep Quick boot set to disabled
No keyboard detected
One continuous beep followed by two
No memory detected
short beeps then a pause (repeated)
One continuous beep followed by three
No VGA detected
short beeps
One continuous beep followed by four
Hardware component failure
short beeps

7. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.

2.5 Turning off the computer

While the system is ON, press the power button for less than four seconds to put the system
on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button
for more than four seconds to let the system enter the soft-off mode regardless of the BIOS
setting.

ROG STRIX B550-I GAMING 2-21

Chapter 2

2-22 Chapter 2: Basic Installation

Chapter 3: BIOS and RAID Support

BIOS and RAID Support

3
For more details on BIOS and RAID configurations, please refer to www.asus.com/
support.

3.1 Knowing BIOS

The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI
architecture, offering a user-friendly interface that goes beyond the traditional keyboard-
only BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
• An error message appears on the screen during the system bootup and requests you
to run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or
update.

Chapter 3
Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained
service personnel.

• When downloading or updating the BIOS file, rename it as SB550IG.CAP for this
motherboard.

• BIOS settings and options may vary due to different BIOS release versions. Please
refer to the latest BIOS version for settings and options.

ROG STRIX B550-I GAMING 3-1

 3.2 BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.

Entering BIOS at startup

To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test
(POST). If you do not press <Delete> or <F2>, POST continues with its routines.

Entering BIOS Setup after POST

To enter BIOS Setup after POST:
• Press <Ctrl>+<Alt>+<Delete> simultaneously.
• Press the reset button on the system chassis.
• Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
After doing either of the three options, press <Delete> key to enter BIOS.

• Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.

• If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>.

• If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value.

• The BIOS setup program does not support Bluetooth devices.

Chapter 3

BIOS menu screen

The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.

3.3 EZ Update
The EZ Update is a utility that allows you to update the motherboard BIOS in Windows®
environment.

• EZ Update requires an Internet connection either through a network or an ISP

(Internet Service Provider).

• This utility is available in the support USB drive that comes with the motherboard
package.

3-2 Chapter 3: BIOS Setup

3.4 ASUS EZ Flash 3
The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based
utility.

Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu or press hotkey <F5>.

To update the BIOS:

• This function can support devices such as a USB flash disk with FAT 32/16 format
and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!

1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash 3 Utility and press <Enter>.
3. Press <Tab> to switch to the Drive field.
4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest
BIOS, and then press <Enter>.
5. Press <Tab> to switch to the Folder field.
6. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to
perform the BIOS update process. Reboot the system when the update process is
done.

Chapter 3

ROG STRIX B550-I GAMING 3-3

 3.5 ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.

The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
https://www.asus.com/support/ and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS:
1. Turn on the system.
2. Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
3. The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 3 automatically.
4. The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Chapter 3

3-4 Chapter 3: BIOS Setup

3.6 RAID configurations
The motherboard comes with the RaidXpert2 Configuration Utility that supports Volume,
RAIDABLE, RAID 0, RAID 1, and RAID 10 (depends on system licensing) configurations.

For more information on configuring your RAID sets, please

refer to the RAID Configuration Guide which you can find at
https://www.asus.com/support, or by scanning the QR code.

RAID definitions
Volume provides the ability to link-together storage from one or several disks, regardless
of the size of the space on those disks. This configuration is useful in scavenging space on
disks unused by other disks in the array. This configuration does not provide performance
benefits or data redundancy, disk failure will result in data loss.
RAIDABLE arrays (also known as RAID Ready) are a special type of Volume (JBOD) that
allows the user to add more storage space or create a redundant array after a system is
installed. RAIDABLE arrays are created using Option ROM, UEFI, or rcadm.

The ability to create RAIDABLE arrays may vary per system.

RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications

Chapter 3
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system.
Use two new drives or use an existing drive and a new drive for this setup. The new drive
must be of the same size or larger than the existing drive.
RAID 10 is data striping and data mirroring combined without parity (redundancy data)
having to be calculated and written. With the RAID 10 configuration you get all the benefits
of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing
drive and three new drives for this setup.

ROG STRIX B550-I GAMING 3-5

Chapter 3

3-6 Chapter 3: BIOS Setup

Appendix

Appendix
Notices
FCC Compliance Information
Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555

Identification of the assembled product: INTEL® WI-FI 6 AX200

Identification of the modular components used in the assembly:
Model Name: INTEL® WI-FI 6 AX200 FCC ID: PD9AX200NG
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-C
 onnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
Appendix

ROG STRIX B550-I GAMING A-1

 Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)

Déclaration de conformité de Innovation, Sciences et

Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
La bande 5150–5250 MHz est réservée uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux.
CAN ICES-3(B)/NMB-3(B)

VCCI: Japan Compliance Statement

Class B ITE

KC: Korea Warning Statement

Appendix

A-2 Appendix
Google™ License Terms
Copyright© 2020 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS
OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
License.

NCC: Taiwan Wireless Statement

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及
干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或
工業、科學及醫療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作。

Japan RF Equipment Statement

屋外での使用について
本製品は、5GHz帯域での通信に対応しています。電波法の定めにより5.2GHz、5.3GHz帯域の電
波は屋外で使用が禁じられています。
法律および規制遵守
本製品は電波法及びこれに基づく命令の定めるところに従い使用してください。日本国外では、
その国の法律または規制により、本製品の使用ができないことがあります。このような国では、本
製品を運用した結果、罰せられることがありますが、当社は一切責任を負いかねますのでご了承
ください。

Précautions d’emploi de l’appareil :

a. Soyez particulièrement vigilant quant à votre sécurité lors de l’utilisation de cet
appareil dans certains lieux (les avions, les aéroports, les hôpitaux, les stations-
service et les garages professionnels).
b. Évitez d’utiliser cet appareil à proximité de dispositifs médicaux implantés. Si
vous portez un implant électronique (stimulateurs cardiaques, pompes à insuline,
neurostimulateurs…), veuillez impérativement respecter une distance minimale de 15
centimètres entre cet appareil et l’implant pour réduire les risques d’interférence.
Appendix

c. Utilisez cet appareil dans de bonnes conditions de réception pour minimiser le niveau
de rayonnement. Ce n’est pas toujours le cas dans certaines zones ou situations,
notamment dans les parkings souterrains, dans les ascenseurs, en train ou en voiture
ou tout simplement dans un secteur mal couvert par le réseau.
d. Tenez cet appareil à distance du ventre des femmes enceintes et du bas-ventre des
adolescents.

ROG STRIX B550-I GAMING A-3

 Declaration of compliance for product environmental
regulation
ASUS follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASUS product is in line with global
environmental regulations. In addition, ASUS disclose the relevant information based on
regulation requirements.
Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on
regulation requirements ASUS is complied with:

EU REACH and Article 33

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see
http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits
use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and
polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in
homogenous materials and 0.01% by weight in homogenous materials for cadmium, except
for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of
the Vietnam Circular 30/2011/TT-BCT.
Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng
các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.

Turkey RoHS
AEEE Yönetmeliğine Uygundur

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for you to
be able to responsibly recycle our products, batteries, other components as well as the
packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed
Appendix

recycling information in different regions.

A-4 Appendix
 DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.

Regional notice for California

WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Appendix

ROG STRIX B550-I GAMING A-5

 Simplified EU Declaration of Conformity Forenklet EU-overensstemmelseserklæring
ASUSTek Computer Inc. hereby declares that this device is in compliance ASUSTeK Computer Inc. erklærer hermed at denne enhed er i
with the essential requirements and other relevant provisions of Directive overensstemmelse med hovedkravene og øvrige relevante bestemmelser i
2014/53/EU. Full text of EU declaration of conformity is available at direktivet 2014/53/EU. Hele EU-overensstemmelseserklæringen kan findes
https://www.asus.com/support/ på https://www.asus.com/support/
The WiFi operating in the band 5150-5350MHz shall be restricted to indoor Wi-Fi, der bruger 5150-5350 MHz skal begrænses til indendørs brug i lande,
use for countries listed in the table below: der er anført i tabellen:
Déclaration simplifiée de conformité de l’UE Vereenvoudigd EU-conformiteitsverklaring
ASUSTek Computer Inc. déclare par la présente que cet appareil est ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat voldoet aan de
conforme aux critères essentiels et autres clauses pertinentes de la directive essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/
2014/53/EU. La déclaration de conformité de l’UE peut être téléchargée à EU. De volledige tekst van de EU-conformiteitsverklaring is beschikbaar op
partir du site internet suivant : https://www.asus.com/support/ https://www.asus.com/support/
Dans la plage de fréquence 5150-5350 MHz, le Wi-Fi est restreint à une De WiFi op 5150-5350MHz zal beperkt zijn tot binnengebruik voor in de
utilisation en intérieur dans les pays listés dans le tableau ci-dessous: tabel vermelde landen:
Vereinfachte EU-Konformitätserklärung Lihtsustatud EÜ vastavusdeklaratsioon
ASUSTek COMPUTER INC erklärt hiermit, dass dieses Gerät mit den Käesolevaga kinnitab ASUSTek Computer Inc, et seade vastab direktiivi
grundlegenden Anforderungen und anderen relevanten Bestimmungen 2014/53/EÜ olulistele nõuetele ja teistele asjakohastele sätetele. EL
der Richtlinie 2014/53/EU übereinstimmt. Der gesamte Text der EU- vastavusdeklaratsiooni täistekst on saadaval veebisaidil
Konformitätserklärung ist verfügbar unter: https://www.asus.com/support/ https://www.asus.com/support/
Der WLAN-Betrieb im Band von 5150-5350 MHz ist für die in der unteren Sagedusvahemikus 5150-5350 MHz töötava WiFi kasutamine on järgmistes
Tabelle aufgeführten Länder auf den Innenbereich beschränkt: riikides lubatud ainult siseruumides:
Dichiarazione di conformità UE semplificata Eurooppa - EY:n vaatimustenmukaisuusvakuutus
ASUSTek Computer Inc. con la presente dichiara che questo dispositivo è ASUSTek Computer Inc. ilmoittaa täten, että tämä laite on direktiivin
conforme ai requisiti essenziali e alle altre disposizioni pertinenti con la 2014/53/EU olennaisten vaatimusten ja muiden asiaankuuluvien lisäysten
direttiva 2014/53/EU. Il testo completo della dichiarazione di conformità UE mukainen. Koko EY:n vaatimustenmukaisuusvakuutuksen teksti on
è disponibile all’indirizzo: https://www.asus.com/support/ luettavissa osoitteessa https://www.asus.com/support/
L’utilizzo della rete Wi-Fi con frequenza compresa nell’intervallo 5150- 5 150 - 5 350 MHz:in taajuudella toimiva WiFi on rajoitettu sisäkäyttöön
5350MHz deve essere limitato all’interno degli edifici per i paesi presenti taulukossa luetelluissa maissa:
nella seguente tabella: ‫تبعیت از نسخه ساده شده بیانیه اتحادیه اروپا‬
Упрощенное заявление о соответствии европейской директиве ‫ در اینجا اعالم می کند که این دستگاه با نیازهای اساسی و سایر‬ASUSTek Computer Inc
ASUSTek Computer Inc. заявляет, что устройство соответствует основным ‫ متن کامل پیروی از این بیانیه اتحادیه‬.‫ مطابقت دارد‬.2014/53/EU ‫مقررات مربوط به بیانیه‬
требованиям и другим соответствующим условиям директивы 2014/53/ :‫اروپا در این آدرس موجود است‬
EU. Полный текст декларации соответствия ЕС доступен на .https://www.asus.com/support/
https://www.asus.com/support/ ‫ باید برای استفاده در فضای داخل ساختمان برای‬WiFi ‫ مگاهرتز برای‬5150-5350 ‫عملکرد‬
Работа WiFi в диапазоне частот 5150-5350 должна быть ограничена .‫ محدود شود‬،‫کشورهای فهرست شده در جدول‬
использованием в помещениях для стран, перечисленных в таблице ниже: Απλοποιημένη Δήλωση Συμμόρφωσης ΕΕ
‫إعالن التوافق المبسط الصادر عن االتحاد األوروبي‬ Διά του παρόντος η ASUSTek Computer Inc. δηλώνει ότι αυτή η συσκευή
‫ أن هذا الجهاز يتوافق مع المتطلبات األساسية واألحكام‬ASUSTek Computer ‫تقر شركة‬ είναι σύμμορφη με τις βασικές προϋποθέσεις και άλλες σχετικές διατάξεις
‫ يتوفر النص الكامل إلعالن التوافق‬.2014/53/EU ‫األخرى ذات الصلة الخاصة بتوجيه‬ της Οδηγίας 2014/53/ΕE. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της
:‫الصادر عن االتحاد األوروبي على‬ ΕΕ είναι διαθέσιμο στη διεύθυνση https://www.asus.com/support/
https://www.asus.com/support/ Το WiFi που λειτουργεί στη ζώνη 5150-5350MHz περιορίζεται για χρήση σε
‫ ميجا هرتز على االستخدام المنزلي للبلدان‬5150-5350 ‫ العاملة بـ‬WiFi ‫يجب حصر استخدام‬ εσωτερικούς χώρους για τις χώρες που αναφέρονται στον παρακάτω πίνακα:
.‫المدرجة بالجدول‬ ‫הצהרת תאימות רגולטורית מקוצרת עבור האיחוד אירופי‬
Опростена декларация за съответствие на ЕС ‫ מצהירה בזאת כי מכשיר זה תואם לדרישות‬ASUSTek Computer Inc.‎
С настоящото ASUSTek Computer Inc. декларира, че това устройство е ‫ ניתן לקרוא את‬.‎2014/53/EU ‫החיוניות ולשאר הסעיפים הרלוונטיים של תקנה‬
в съответствие със съществените изисквания и другите приложими :‫הנוסח המלא של הצהרת התאימות הרגולטורית עבור האיחוד האירופי בכתובת‬
постановления на свързаната Директива 2014/53/EC. Пълният текст на https://www.asus.com/support/‎
ЕС декларация за съвместимост е достъпен на адрес ‫ לשימוש‬‎5150-5350MHz ‫ הפועלות ברצועת התדרים‬Wi-Fi ‫יש להגביל רשתות‬
https://www.asus.com/support/
:‫בתוך מבנים סגורים בארצות המפורטות ברשימה הבאה‬
WiFi, работеща в диапазон 5150-5350MHz, трябва да се ограничи до
Egyszerűsített EU megfelelőségi nyilatkozat
употреба на закрито за страните, посочени в таблицата по-долу:
Az ASUSTek Computer Inc. ezennel kijelenti, hogy ez az eszköz megfelel az
Declaração de Conformidade UE Simplificada
2014/53/EU sz. irányelv alapvető követelményeinek és egyéb vonatkozó
ASUSTek Computer Inc. declara que este dispositivo está em conformidade rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövegét a
com os requisitos essenciais e outras disposições relevantes relacionadas às következő weboldalon tekintheti meg: https://www.asus.com/support/
diretivas 2014/53/UE. O texto completo da declaração de conformidade CE
Az 5150-5350 MHz-es sávban működő Wi-Fi-t beltéri használatra kell
está disponível em https://www.asus.com/support/
korlátozni az alábbi táblázatban felsorolt országokban:
O WiFi operando na banda 5150-5350MHz deve ser restrito para uso interno
Pernyataan Kesesuaian UE yang Disederhanakan
para os países listados na tabela abaixo:
ASUSTeK Computer Inc. dengan ini menyatakan bahwa perangkat ini
Pojednostavljena EU Izjava o sukladnosti
memenuhi persyaratan utama dan ketentuan relevan lainnya yang terdapat
ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim pada Petunjuk 2014/53/EU. Teks lengkap pernyataan kesesuaian EU tersedia
zahtjevima i ostalim odgovarajućim odredbama direktive 2014/53/EU. Cijeli di: https://www.asus.com/support/
tekst EU izjave o sukladnosti dostupan je na https://www.asus.com/support/
WiFi yang Beroperasi pada 5150-5350 MHz akan terbatas untuk penggunaan
Appendix

WiFi koji radi na opsegu frekvencija 5150-5350 MHz bit će ograničen na dalam ruangan di negara yang tercantum dalam tabel
upotrebu u zatvorenom prostoru u zemljama na donjem popisu:
Vienkāršota ES atbilstības paziņojums
Zjednodušené prohlášení o shodě EU
ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst Direktīvas
Společnost ASUSTek Computer Inc. tímto prohlašuje, že toto zařízení splňuje 2014/53/ES būtiskajām prasībām un citiem citiem saistošajiem
základní požadavky a další příslušná ustanovení směrnice 2014/53/ EU. Plné nosacījumiem. Pilns ES atbilstības paziņojuma teksts pieejams šeit:
znění prohlášení o shodě EU je k dispozici na adrese https://www.asus.com/support/
https://www.asus.com/support/
Wi-Fi darbība 5150–5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras
V zemích uvedených v tabulce je provoz sítě Wi-Fi ve frekvenčním rozsahu 5 norādītas tālāk.
150 - 5 350 MHz povolen pouze ve vnitřních prostorech:

A-6 Appendix
Supaprastinta ES atitikties deklaracija ประกาศเกี่ยวกับความสอดคล้องของสหภาพยุโรปแบบย่อ
Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis ASUSTek Computer Inc. ขอประกาศในที่นี้ว่าอุปกรณ์นี้มีความสอดคล้องกั
prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos บความ
2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia: ต้องการที่จำ�เป็นและเงื่อนไขที่เกี่ยวข้องอื่น ๆ ของบทบัญญัติข้อกำ�หนด
https://www.asus.com/support/ 2014/53/EU เนื้อหาที่สมบูรณ์ของประกาศความสอดคล้องกับ EU มีอยู่ที่
Toliau nurodytose šalyse „WiFi“ ryšiu, veikiančiu 5 150–5 350 MHz dažnio https://www.asus.com/support/
juostoje, galima naudotis tik patalpose: การทำ�งานของ WiFi ที่ 5150-5350MHz ถูกจำ�กัดให้ใช้ในอาคารสำ�หรับประ
Forenklet EU-samsvarserklæring เทศที่แสดงในตาราง
ASUSTek Computer Inc. erklærer herved at denne enheten er i samsvar med Basitleştirilmiş AB Uyumluluk Bildirimi
hovedsaklige krav og andre relevante forskrifter i direktivet 2014/53/EU. ASUSTek Computer Inc., bu aygıtın 2014/53/EU Yönergesinin temel
Fullstendig tekst for EU-samsvarserklæringen finnes på: gereksinimlerine ve diğer ilgili hükümlerine uygun olduğunu bildirir. AB
https://www.asus.com/support/ uygunluk bildiriminin tam metni şu adreste bulunabilir:
Wi-Fi-området 5150–5350 MHz skal begrenses til innendørs bruk for landene https://www.asus.com/support/
som er oppført i tabellen: 5150-5350 MHz arasındaki WiFi çalışması, tabloda listelenen ülkeler için
Uproszczona deklaracja zgodności UE iç mekân kullanımıyla kısıtlanacaktır.
Firma ASUSTek Computer Inc. niniejszym oświadcza, że urządzenie to jest Спрощена декларація про відповідність нормам ЄС
zgodne z zasadniczymi wymogami i innymi właściwymi postanowieniami ASUSTek Computer Inc. заявляє, що цей пристрій відповідає основним
dyrektywy 2014/53/EU. Pełny tekst deklaracji zgodności UE jest dostępny вимогам та іншим відповідним вимогам Директиви 2014 / 53 / EU.
pod adresem https://www.asus.com/support/ Повний текст декларації відповідності нормам ЄС доступний на
W krajach wymienionych w tabeli działanie sieci Wi-Fi w paśmie 5150– https://www.asus.com/support/
5350 MHz powinno być ograniczone wyłącznie do pomieszczeń: Робота Wi-Fi на частоті 5150-5350 МГц обмежується використанням у
Declaração de Conformidade Simplificada da UE приміщенні для країн, поданих у таблиці нижче:
A ASUSTek Computer Inc. declara que este dispositivo está em
conformidade com os requisitos essenciais e outras disposições relevantes
da Diretiva 2014/53/UE. O texto integral da declaração de conformidade da
UE está disponível em https://www.asus.com/support/
A utilização das frequências WiFi de 5150 a 5350MHz está restrita a
ambientes interiores nos países apresentados na tabela:
Declarație de conformitate UE, versiune simplificată AT BE BG CZ DK EE FR
Prin prezenta, ASUSTek Computer Inc. declară că acest dispozitiv este în
DE IS IE IT EL ES CY
conformitate cu reglementările esențiale și cu celelalte prevederi relevante
ale Directivei 2014/53/UE. Textul complet al declarației de conformitate UE LV LI LT LU HU MT NL
este disponibil la adresa https://www.asus.com/support/ NO PL PT RO SI SK TR
Pentru ţările listate în tabelul de mai jos, reţelele WiFi care funcţionează în
FI SE CH UK HR
banda de frecvenţă de 5.150-5.350 MHz trebuie utilizate doar în interior:
Pojednostavljena Deklaracija o usaglašenosti EU
ASUSTek Computer Inc. ovim izjavljuje da je ovaj uređaj usaglašen sa
Intel® WI-FI 6 AX200 output power table:
osnovnim zahtevima i drugim relevantnim odredbama Direktive 2014/53/
EU. Ceo tekst Deklaracije o usaglašenosti EU dostupan je na lokaciji
https://www.asus.com/support/ Function Frequency Maximum Output Power
(EIRP)
WiFi koji radi u frekventnom opsegu od 5150 MHz do 5350 MHz ograničen
je isključivo na upotrebu u zatvorenom prostoru za zemlje navedene u 2412 - 2472 MHz 18.64 dBm
tabeli ispod:
5150 - 5250 MHz 20.64 dBm
Zjednodušené vyhlásenie o zhode platné pre EÚ
WiFi 5250 - 5350 MHz 20.18 dBm
Spoločnosť ASUSTek Computer Inc. týmto vyhlasuje, že toto zariadenie je
v súlade so základnými požiadavkami a ďalšími príslušnými ustanoveniami 5470 - 5725 MHz 20.06 dBm
smernice č. 2014/53/EÚ. Plné znenie vyhlásenia o zhode pre EÚ je k dispozícii 5725 - 5850 MHz 10.15 dBm
na lokalite https://www.asus.com/support/
Bluetooth 2402 - 2480 MHz 13.05 dBm
Činnosť WiFi v pásme 5150 - 5350 MHz bude obmedzená na použitie vo
vnútornom prostredí pre krajiny uvedené v tabuľke nižšie:
For the standard EN 300 440, if this device operates in
Poenostavljena izjava EU o skladnosti 5725-5875 MHz, it will be considered as a receiver category 2.
ASUSTek Computer Inc. tukaj izjavlja, da je ta naprava skladna s temeljnimi
zahtevami in drugimi relevantnimii določili Direktive 2014/53/EU. Polno
besedilo izjave EU o skladnosti je na voljo na https://www.asus.com/
support/
WiFi, ki deluje v pasovnem območju 5150–5350 MHz, mora biti v državah,
navedenih v spodnjem seznamu, omejen na notranjo uporabo:
Declaración de conformidad simplificada para la UE
Por la presente, ASUSTek Computer Inc. declara que este dispositivo cumple
los requisitos básicos y otras disposiciones pertinentes de la directiva
2014/53/EU. En https://www.asus.com/support/ está disponible el texto
completo de la declaración de conformidad para la UE.
Appendix

La conexión WiFi con una frecuencia de funcionamiento de 5150-5350 MHz

se restringirá al uso en interiores para los países enumerados en la tabla:
Förenklad EU-försäkran om överensstämmelse
ASUSTek Computer Inc. deklarerar härmed att denna enhet överensstämmer
med de grundläggande kraven och andra relevanta bestämmelser i direktiv
2014/53/EU. Fullständig text av EU-försäkran om överensstämmelse finns på
https://www.asus.com/support/
WiFi som använder 5150-5350 MHz kommer att begränsas för användning
inomhus i de länder som anges i tabellen:

ROG STRIX B550-I GAMING A-7

 ASUS contact information

ASUSTeK COMPUTER INC.

Address 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site https://www.asus.com

Technical Support
Telephone +86-21-38429911
Online support https://qr.asus.com/techserv

ASUS COMPUTER INTERNATIONAL (America)

Address 48720 Kato Rd., Fremont, CA 94538, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site https://www.asus.com/us/

Technical Support
Support fax +1-812-284-0883
Telephone +1-812-282-2787
Online support https://qr.asus.com/techserv

ASUS COMPUTER GmbH (Germany and Austria)

Address Harkortstrasse 21-23, 40880 Ratingen, Germany
Web site https://www.asus.com/de
Online contact https://www.asus.com/support/Product/ContactUs/
Services/questionform/?lang=de-de

Technical Support
Telephone (DE) +49-2102-5789557
Telephone (AT) +43-1360-2775461
Online support https://www.asus.com/de/support
Appendix

A-8 Appendix