10/13/2015

Quality Documentation
Package

Customer: SOCAR-AQS LLC

Customer Purchase Order Number: 009/160715
NOV GP Sales Order Number: 10000660
NOV GP Order Line Number: 2.1

5" OD 19.5 LB./FT. .362 WT IEU UPSET Range 2 GRADE S-135 DRILL STRING
WITH GPDS50 6.063 Bevel PIN 6.625" OD X 3.25" ID 9" TONG SPACE WITH Arnco
350XT HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS AND
GPDS50 6.063 Bevel BOX 6.625" OD X 3.25" ID 12" TONG SPACE WITH Arnco
350XT HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS, TK-34
COATING

Grant Prideco
NAVASOTA, TX, USA

www.nov.com/GrantPrideco/CustomerFeedback
 Drill Pipe Performance Sheet
www.NOV.com/GrantPrideco Phone: +1 (281) 878-8000

Drill Pipe Configuration

Pipe Body OD (in) 5.000 95 % Inspection Class
Pipe Body Wall Thickness (in) 0.362 Nominal Weight Designation 19.50
Pipe Body Grade S-135 Drill Pipe Approximate Length (ft) 31.5
Drill Pipe Length Range2 SmoothEdge Height (in) Not Raised
Connection GPDS50 Tool Joint SMYS (psi) 120,000
Tool Joint OD (in) 6.625 Upset Type IEU
Tool Joint ID (in) 3.250 Max Upset OD (DTE) (in) 5.125
Pin Tong (in) 9 Friction Factor 1.0
Box Tong (in) 12 Note: Tong space may include hardfacing.

Drill Pipe Performance Drill-Pipe Length Range2

Performance of Drill Pipe with Pipe Body at Best Estimates Nominal

(without Coating) (with Coating)
95 % Inspection Class (least
Applied Make-up Operational Max Tension
Drill Pipe Adjusted Weight (lbs/ft) 24.11 23.29
Torque
(ft-lbs) Torque (ft-lbs) (lbs) Fluid Displacement (gal/ft) 0.37 0.36
Tension Only 0 673,800 Fluid Displacement (Bbls/ft) 0.0088 0.0085
Maximum MUT 43,100 Combined Loading Fluid Capacity (gal/ft) 0.71 0.70 0.72
38,300 564,300
Fluid Capacity (Bbls/ft) 0.0169 0.0167 0.0172
Tension Only 0 673,800 Drift Size (in) 3.125
Minimum MUT 36,100 Combined Loading 30,900 604,500 Note: Oil field barrel equals 42 US gallons.
Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors.

Connection Performance GPDS50 ( 6.625 (in) OD X 3.250 (in) ID ) 120,000 (psi)

Applied Make-up Tension at Shoulder Tension at Connection

Torque Separation Yield
Tool Joint Dimensions
(ft-lbs) (lbs) (lbs) Balanced OD (in) 6.435
Maximum Make-up Torque 43,100 Tensile Limited 1,046,900 Minimum Tool Joint OD for API 5.930
Premium Class (in)
Minimum Make-up Torque 36,100 1,202,500 1,250,000
Minimum Tool Joint OD for 5.93
Note: The maximum make-up torque should be applied when possible. (in)
Counterbore
Note: To maximize connection operational tensile, a MUT (T4) = 37,500 (ft-lbs) should be applied.
Tool Joint Torsional Strength (ft-lbs) 71,800
Tool Joint Tensile Strength (lbs) 1,250,000

Elevator Shoulder Information Elevator OD Not Raised 6.625 (in)

SmoothEdge Height Nominal Tool Joint Worn to Bevel Worn to Min TJ OD for
Not Raised OD Diameter API Premium Class
Box OD (in) 6.625 6.625 6.063 5.930
Elevator Capacity (lbs) 1,440,200 1,440,200 823,600 685,600
Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 110,100psi.
Assumed Elevator Bore Diameter (in) 5.219 Note: A raised elevator OD increases elevator capacity without affecting make-up torque.

Pipe Body Slip Crushing Capacity Pipe Body Configuration ( 5 (in) OD 0.362 (in) Wall S-135 )
Nominal 95 % Inspection Class API Premium Class
Slip Crushing Capacity (lbs) 498,300 472,800 396,500
Note: Slip Crushing: Slip crushing load is calculated with the Spiri-Reinhold equation from “Why Does Drill Pipe
Assumed Slip Length (in) 16.5 Fail in the Slip Area” World Oil, 1959 for the slip length and transverse load factor shown and is for reference
only. Slip crushing is dependent on the slip design and condition, coefficient of friction, loading conditions, time in
Transverse Load Factor (K) 4.2 slips, drill pipe OD and wall variation, and other factors. Consult with the slip manufacturer for additional
information.

Pipe Body Performance Pipe Body Configuration ( 5 (in) OD 0.362 (in) Wall S-135 )
Nominal 95 % Inspection Class API Premium Class
Pipe Tensile Strength (lbs) 712,100 673,800 560,800
Pipe Torsional Strength (ft-lbs) 74,100 70,000 58,100
TJ/PipeBody Torsional Ratio 0.97 1.03 1.24
80% Pipe Torsional Strength (ft-lbs) 59,300 56,000 46,500
Burst (psi) 17,105 18,571 15,638 Note: Nominal Burst
calculated at 87.5% RBW
Collapse (psi) 15,672 14,292 10,029 per API.
Pipe OD (in) 5.000 4.964 4.855
Wall Thickness (in) 0.362 0.344 0.290
Nominal Pipe ID (in) 4.276 4.276 4.276
Cross Sectional Area of Pipe Body (in^2) 5.275 4.991 4.154
Cross Sectional Area of OD (in^2) 19.635 19.352 18.514
Cross Sectional Area of ID (in^2) 14.360 14.360 14.360
Section Modulus (in^3) 5.708 5.395 4.476
Polar Section Modulus (in^3) 11.415 10.790 8.953
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully
responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied
warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear
conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance
ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID’s, tool joint ID refers to
the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

www.NOV.com/GrantPrideco/CustomerFeedback NOV GrantPrideco 10-14-2015

 Operational Limits of Drill Pipe
Connection GPDS50 Tool Joint OD (in) 6.625 Tool Joint ID (in) 3.250 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Pipe Body 95 % Inspection Class Pipe Body OD (in) 5 Wall Thickness (in) 0.362 Pipe Body Grade S-135

Combined Loading for Drill Pipe at Combined Loading for Drill Pipe at
Maximum Make-up Torque = 43,100 (ft-lbs) Minimum Make-up Torque = 36,100 (ft-lbs)

Operational Assembly Pipe Body Connection Max Operationa Assembly Pipe Body Connection
l Torque Max Tension Max Tension
Torque Max Tension Max Tension Tension Max Tension
(ft-lbs) (lbs) (lbs) (lbs) (ft-lbs) (lbs) (lbs) (lbs)

673,800 1,046,900 0 673,800 673,800 1,202,500

0 673,800
673,600 1,046,900 1,600 673,700 673,700 1,202,500
2,000 673,600
672,700 1,046,900 3,300 673,100 673,100 1,202,500
4,000 672,700
671,400 1,046,900 4,900 672,200 672,200 1,202,500
6,000 671,400
669,300 1,046,900 6,500 670,900 670,900 1,202,500
8,100 669,300
666,800 1,046,900 8,100 669,300 669,300 1,202,500
10,100 666,800
663,700 1,046,900 9,800 667,200 667,200 1,202,500
12,100 663,700
660,000 1,046,900 11,400 664,800 664,800 1,202,500
14,100 660,000
655,800 1,046,900 13,000 662,100 662,100 1,202,500
16,100 655,800
650,900 1,046,900 14,700 658,800 658,800 1,202,500
18,100 650,900
645,500 1,046,900 16,300 655,300 655,300 1,202,500
20,100 645,500
639,100 1,046,900 17,900 651,500 651,500 1,202,500
22,200 639,100
632,300 1,046,900 19,500 647,200 647,200 1,202,500
24,200 632,300
624,900 1,046,900 21,200 642,200 642,200 1,202,500
26,200 624,900
616,800 1,046,900 22,800 637,100 637,100 1,202,500
28,200 616,800
608,000 1,046,900 24,400 631,600 631,600 1,202,500
30,200 608,000
598,400 1,046,900 26,100 625,300 625,300 1,202,500
32,200 598,400
587,500 1,046,900 27,700 618,900 618,900 1,202,500
34,300 587,500
576,300 1,046,900 29,300 612,000 612,000 1,202,500
36,300 576,300
564,300 1,046,900 30,900 604,500 604,500 1,202,500
38,300 564,300
Operational drilling torque is limited by the Make-up Torque. Operational drilling torque is limited by the Make-up Torque.

Connection
Make-up Torque Range
Make-up Torque Connection Max
(ft-lbs) Tension (lbs)
Min MUT 36,100 1,202,500
36,900 1,229,200
37,700 1,243,600
38,400 1,218,100
39,200 1,189,000
40,000 1,159,800
40,800 1,130,700
41,500 1,105,200
42,300 1,076,100
Max MUT 43,100 1,046,900
Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.

Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and
suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated
based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable
operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the
application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

NOV GrantPrideco 10-14-2015

 Connection Wear Table
Connection GPDS50 Tool Joint OD (in) 6.625 Tool Joint ID (in) 3.250 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Connection
Wear
Tool Connection Max Connection Max Min MUT Connection Max
Torsional Tension Tension
New OD Joint OD MUT
(in) Strength (ft-lbs) (ft-lbs) (lbs) (ft-lbs) (lbs)

6.625 71,800 43,100 1,046,900 35,900 1,195,900

6.562 71,800 43,100 1,034,900 35,900 1,208,700
6.499 71,800 43,100 1,022,600 35,900 1,222,400
6.435 71,800 43,100 1,009,800 35,900 1,237,500
6.372 71,200 42,700 1,008,100 35,600 1,245,200
6.309 68,000 40,800 1,057,300 34,000 1,207,700
6.246 64,800 38,900 1,104,800 32,400 1,169,800
6.183 61,700 37,000 1,150,400 30,800 1,131,300
6.12 58,600 35,200 1,190,900 29,300 1,096,100
6.056 55,500 33,300 1,232,300 27,800 1,060,800
Worn OD
5.993 52,600 31,500 1,227,200 26,300 1,024,600
5.93 49,600 29,800 1,187,100 24,800 987,900

Pipe Body
Combined Loading Table (Torque-Tension)
Pipe Body 95 % Inspection Class Pipe Body OD (in) 5 Wall Thickness (in) 0.362 Pipe Body Grade S-135

Pipe Body Torque

0 6,400 12,700 19,100 25,500 31,800 38,200 44,600 50,900 57,300 63,700 70,000
(ft-lbs)

Pipe Body Max

673,800 671,000 662,700 648,300 627,600 600,400 564,800 519,600 462,900 387,500 280,200 23,600
Tension (lbs)

Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and
suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated
based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable
operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the
application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

NOV GrantPrideco 10-14-2015

 Controlled Length: 30 ft. - 32 ft. Shoulder to Shoulder

12.000 3.498 2.522 9.000 4.913

5.000

3.500 .362
18° 35°

4.000
6.625 3.250 4.875 4.276 6.625 3.250
Min.

.094 5.125 5.000 5.125 .094

3.000 Hardbanding 1.500 Hardbanding

Drill Pipe Line Drawing

TITLE:

UNLESS OTHERWISE
SPECIFIED 5in. 0.362 in - 19.5 lb/ft
ALL DIMENSIONS IEU - 5.125 Max OD
Range 2 S-135
ARE NOMINAL GPDS50, 6.625in. OD
Copyrighted as an unpublished work. ALL RIGHTS DRAWN BY 6.625in. Pin ID x 9in. Pin Tong
RESERVED. This work contains the CONFIDENTIAL AND Brian Narjes 6.625in. Box ID x 12in. Box Tong
PROPRIETARY INFORMATION of Grant Prideco. Neither DRAWING STATE DATE Arnco 350XT hardbanding applied 3/32in. Raised to tool joint OD.
this document nor any information disclosed here in shall be
reproduced in any form, used or disclosed to others for any
Uncontrolled 6/18/2015
2015-3391-2 6:53 AM
REFERENCED QUOTE SCALE DWG NO. SHEET REV
purpose including manufacturing without the express written
permission of Grant Prideco. 2015-3391 A NONE 1 of 1 1
 Certificate of Make and Break
This hereby certifies that the Make and Break Operation has been
performed on the following:

GPDS50 PIN 6.625" OD X 3.25" ID 9" TONG SPACE WITH Arnco 350XT
HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS

GPDS50 BOX 6.625" OD X 3.25" ID 12" TONG SPACE WITH Arnco 350XT
HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS

in strict compliance with the Applicable Grant Prideco Standard

Operating Procedure No. DS-OP-31 Rev. 11, 2-1-11 for the Make and
Break Operation, Latest Revision. The issuance of this certificate
indicates that the Make and Break Operation was completed.

5" OD 19.5 LB./FT. .362 WT IEU UPSET Range 2 GRADE S-135 DRILL STRING
WITH GPDS50 6.063 Bevel PIN 6.625" OD X 3.25" ID 9" TONG SPACE WITH Arnco
350XT HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS AND
GPDS50 6.063 Bevel BOX 6.625" OD X 3.25" ID 12" TONG SPACE WITH Arnco
350XT HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS, TK-34
COATING

10/13/2015
NOV Grant Prideco Representative Date

Customer: SOCAR-AQS LLC Date: 10/13/2015

NOV GP Sales Order Number: 10000660 Customer Purchase Order #: 009/160715
Description: 5" OD 19.5 LB./FT. .362 WT IEU UPSET Range 2 GRADE S-135 DRILL STRING WITH
GPDS50 6.063 Bevel PIN 6.625" OD X 3.25" ID 9" TONG SPACE WITH Arnco 350XT
HARDBANDING & WITH SE None & WITH H-Series BENCHMARKS AND GPDS50 6.063
Bevel BOX 6.625" OD X 3.25" ID 12" TONG SPACE WITH Arnco 350XT HARDBANDING &
WITH SE None & WITH H-Series BENCHMARKS, TK-34 COATING
 Certificate of Inspection

Customer : Grant Prideco P.O. # 2005019

Shop Order : 10000660.2-0001 W.O. # M7407234

DRILL PIPE X TUBING

Pipe Size Pipe Weight Nominal Wall Grade Range Upset Type
5" 19.50# .362" S-135 II IEU

INSPECTION TYPE PERFORMED

X TRUSCOPE-AS X WSEA WSEA OD / DSEA ID

EMI UT ENDS X RECORD HEAT CHG #'S

WALL DATA WALL DATA w/ LOC

The above inspections were performed to meet or exceed the lateset revisions of the
following referenced specification, Tuboscope standard operating procedures, and
any applicable customer specifications:

TUBOSCOPE SOP: I-001, I-002, I-401, I-610 Rev. 6 & API 5DP

448 Total Joints Inspected to 95.00% Remaining Body Wall

448 Prime Joints with I White Band Blue Bands

Tuboscope Representative: Date:

10/14/15

714-COI rev5 08/10