Training MCQS

1. What is the primary function of a diode in an electrical circuit?

A. To store energy
B. To resist the flow of current
C. To allow current to flow in one direction only
D. To generate electricity

2. What is the primary role of an electrical technician?

A. Designing electrical circuits for new buildings.
B. Installing new electrical systems in existing buildings.
C. Inspecting and evaluating electrical grids for issues.
D. To create, maintain and repair the electronic components and
equipment

3. Which of the following tools and techniques are electrical technicians

in India expected to be familiar with?
A. Circuit simulation software
B. Plasma chemical techniques and ion implantation
C. Electric vehicle (EV) charging systems
D. Nanotechnology applications in electronics

4. What does Ohm's Law state?

A. Voltage is the product of resistance and power.
B. Voltage is the product of current and resistance.
C. Voltage is the product of current and power.
D. Voltage is the product of resistance and conductance.

5. Which component is used to store electrical energy in an electric field?

A. Resistor
B. Inductor
C. Capacitor
D. Diode
6. What does 5S stand for in quality and safety standards?
A. Sort, set in order, Shine, Standardize, Sustain
B. Sort, Separate, Shine, Standardize, Sustain
C. Sort, set in order, Shine, Systematize, Sustain
D. Sort, set in order, Sanitize, Standardize, Sustain

7. What is the purpose of a solder mask on a printed circuit board (PCB)?

A. To enhance conductivity
B. To insulate the copper traces
C. To prevent oxidation
D. To protect against electrical interference

8. Why is Electrostatic Discharge (ESD) protection critical in electronic

assembly units?
A. To increase the speed of assembly
B. To ensure worker comfort
C. To prevent damage to sensitive components
D. To reduce power consumption

9. In a parallel circuit, the voltage across each component is:

A. Different
B. The same
C. Half of the total voltage
D. Double the total voltage

10. Which of the following is a correct statement about AC and DC?

A. AC is constant and unidirectional, while DC varies periodically.
B. DC is constant and unidirectional, while AC varies periodically.
C. AC is used in batteries, while DC is used in households.
D. DC is used in households, while AC is used in batteries.

11. An electrician mainly just does installation of

a) electrical equipment
b) wiring machines and house
c) Both a&b
d) None of the above

12. Electrical technician mainly focuses on

a) troubleshooting field
b) fixing electrical problems field
c) Both a&b
d) None of the above

13. A transformer is an electrical device that helps and transfers electrical

energy between more than two circuits through the process of
a) motor induction
b) electrical induction
c) electromagnetic induction
d) none of the above

14. Ohm's law can be applied to

a) resistor
b) rectifier
c) transformer
d) Zener diode

15. Which of the following motor is used in household refrigerator?

a) synchronous motor
b) DC shunt motor
c) 3 -phase induction motor
d) 1 -phase induction motor

16. Ohms law states that:

a) R=I x V
b) V= R/I
c) I= V/R
d) I= V x R

17. Henry is a unit of an electric:

a) inductance
b) capacitance
C) resistance
d) Conductance

18. In an alternating current or AC, the movement or flow of electricity

reverses its direction at
a) regular intervals
b) irregular intervals
c) straight intervals
d) None of the above

19. In direct current or DC, the flow of electricity is only in

a) both direction
b) one direction
c) both a&b
d) None of the above

20. Which of them are the passive electronic components

a) capacitors
b) inductors
c) resistors
d) All of the above

21.What is the role of a fuse in an integrated electrical subsystem?

a) To provide a constant voltage
b) To protect the system from overcurrent
c) To regulate temperature
d) To store electrical charge

22.Which component in an integrated electrical subsystem converts DC to

AC power?
a) Rectifier
b) Transformer
c) Inverter
d) Regulator

23. In an integrated electrical subsystem, what is the purpose of a relay?

a) To amplify signals
b) To store electrical energy
c) To switch circuits on and off
d) To measure voltage

24. What does the colour "Black" indicate in the third position of a
capacitor colour code?
a) Multiplier of 1
b) Multiplier of 10
c) Multiplier of 100
d) Multiplier of 0.1

25.Which colour represents the number 1 in the capacitor colour code?

a) Black
b) Brown
c) Red
d) Orange

26.Which material is most commonly used for electrical wiring in

residential buildings?
a) Silver
b) Gold
c) Copper
d) Aluminium

27.What is the purpose of using a conduit in electrical wiring?

a) To reduce electrical resistance
b) To increase current capacity
c) To protect wires from damage
d) To decrease voltage drop

28.What is the main function of a voltage regulator in a power supply?

a) To step up the voltage
b) To step down the voltage
c) To maintain a constant output voltage
d) To convert DC to AC

29.What is the primary purpose of using safety goggles in an electronic

assembly unit?
A) To improve vision
B) To protect against soldering fumes
C) To protect the eyes from flying debris and solder splashes
D) To look professional

30.If three 10-ohm resistors are connected in series, what is their total
resistance?
A. 10 ohms
B. 30 ohms
C. 3.33 ohms
D. 100 ohms

31. what is the key aspect of the role of an electrical technician?

(a) designing electronic circuit.
(b) writing software program
(c) maintaining and repairing electrical system
(d) conducting chemical experiments
32. which of the following best describes the scope of work for an
electrical technician in
Indian
(a) limited to residential electrical installations
(b)inclusive of industrial commercial and residential electrical system
(c)focused only on the IT industry
(d) constrained to government projects

33. which component is used to convert AC to DC?

(a) transformer
(b)diode
(c)resistor
(d)capacitor

34. what does the 5S standard in the wor place

(a)sorting,seetting in order,shining,standardizing,sustaining
(b)safety,sepeed,saving,security,sustainability
(c)strategy,structure,system,skill,style
(d)supply,storage,shipping,staffing,sales

35. why are ESD precaution important in electronic assembly unit

(a) to save energy
(b)to prevent electrostatic damage to sensitive componenet
(c)to reduce the of production
(d)to enhance the physical appearance of the product

36. what is the primary purpose of a transformer in an electrical circuit

(a)to convert AC to DC
(b)to increase or decrease voltage level
(c)to store electrical energy
 (d)to regulate current flow

37. what is the function of a resistor in an electrical circuit

(a) to store electrical energy
(b) to increase voltage
(c) to limit the flow of current
(d) to convert AC to DC

38. which safety gear is essential for preventing ESD in an electronic

assembly unit
(a)safe glasses
(b)rubber glove
(c)ESD wrist strap
(d)hard hat

39. what is the main purpose of an inductor in an electronic circuit

(a)to resist changes in current
(b)tot store electrical energy
(c)to amplify signal
(d)to convert AC to DC

40. Which document is crucial during the assembly process to ensure that
the current procedures are followed
(a)quality manual
(b)circuit diagram
(c)assembly instructions
(d) maintenance cost

Q41. What is the duty or job responsibilities of an electrical technician

a) Diagnose malfunctioning of system
b) Maintain electrical wiring
c) Install, Repair&maintain electrical wiring
d) All of the above

Q42. Electrical technician can sometimes work with

a) Electrical engineers
b) Politicians
c) Police
d) None of the above

Q43. What is the full form of AC

a) Actual current
b) Actual circuit
c) Alternating current
d) None of the above

Q44. Frequency of Direct Current

a) 50Hz
b) 60Hz
c) 0Hz
d) 100Hz

Q45. SI unit of Inductance

a) Farad
b) Volt
c) Ampere
d) Henry

Q46. Symbol of Ohm\

a) µ
b) β
c) Ω
d) ∑
Q47. How many terminals does a diode have
a) 4
b) 3
c) 2
d) 1

Q48. What does a resistor do

a) Increases the current flow
b) Decreases the current flow
c) Store electric charge
d) Emits light when current flows

Q49. ___________ allows current flow when exposed to light

a) LED
b) Photodiode
c) Zener diode
d) Verica diode

Q50. What is the full form of MCB

a) Miniature circuit breaker
b) Multitasking circuit breaker
c) Main circuit breaker
d) None of the above

Q-51: What is electrical technician -

(A) Electrical technician and Electrician are same, "Which works with all
the wiring systems."
(B) Inspect the electrical system in a building to identify the source of a
problem.
(C) Electrical technicians help to create, maintain and repair the electronic
components and equipment.
(D) Assemble the electronics equipment.

Q-52: An electrical technician knows how to build electrical machines

based on _____.
(A) Electronic components.
(B) Schematic.
(C) Electrical Engineer.
(D) Source of problem.

Q-53: The formula of Ohm's law-

A) V=IxR
B) V=IxR^2
C) R=V/I
D) (A)&(C)

Q-54: Plenums are a form of _____.

A) Air handling space.
B) Art work.
C) 3D image.
D) None of the above.

Q-55: Different modes of faults or failure during assembling -

A) PCB failure.
B) Relay failure.
C) MEMS failure.
D) All of the above.

Q-56: Different types of ICs are-

A) power management ICs.
B) Interface ICs.
C) Memory chips.
D)All of the above.

Q-57: In a DC circuit, the power dissipated by the resistor is-

A)V=IW.
B)W=VI.
C)I=WV.
D)W= V/I.

Q-58: A Thermistor is a temperature sensitive resistor which works on the

principle of ____.
A) Temperature .
B) Resistance .
C) Probes.
D) Elements.

Q-59: Effect on current output -

A) I1= I2= I3= I4=...=...=I(n).
B) I1V1=I2V2=...=...=....I(n)V(n).
C)V1=V2=...=...=V(n)
D) None of the above.

Q-60: HSE stands for health, safety and the Environment-

A) The company's management applies the HSE policies very rigorously
throughout the company
B) For achieving the best of safety and health the HSE must be
recognised, which includes:
C) Basic identification of the risks of HSE and the checking up of
opportunities in the operation.
D) All of the above.
61. What should you do if you think a person with a disability needs
assistance?
A) Ask if they need help and respect their decision
B) Provide help without asking
C) Ignore them
D) Assume they cannot perform the task

62. Which of the following is NOT a potential hazard at the workplace?

A) Electrical accidents
B) Dangerous chemicals
C) Healthy work environment
D) Fire accidents

63. According to the document, how should you interact with someone
who is deaf?
A) Speak loudly
B) Maintain eye contact and speak clearly
C) Use sign language only
D) Avoid talking to them directly

64.Why is it important to follow organizational safety procedures?

A) To meet legal obligations only
B) To enhance product quality and company reputation
C) To allow more free time for employees
D) To reduce the number of meetings
65. In the context of workplace communication, the term "active listening"
involves:
A) Preparing your response while the other person is speaking
B) Nodding along without really paying attention
C) Concentrating, understanding, responding, and then remembering what
is being said
D) Interrupting to ask questions frequently

66. According to the passage, sexual harassment can be:

A) Physical only
B) Psychological only
C) Both physical and psychological
D) None of the above

67. Why is it important to avoid labelling someone by their disability?

a) It is outdated and no longer polite.
b) It takes away from their individuality and abilities.
c) It implies they are a burden on society.
d) All of the above

68. Which of the following practices is essential for maintaining good

housekeeping at the workplace?
A) Sweeping of the workplace
B) Ignoring clutter Regular
C) Using compressed air to remove dust
D) Allowing dirt to accumulate

69. What is the primary purpose of effective housekeeping in the

workplace?
A) To create a visually appealing environment
B) To eliminate workplace hazards
C) To reduce the need for maintenance staff
D) To increase paperwork
Answer: B) To eliminate workplace hazards
Source: Page 119

70. What type of injuries can occur due to improper maintenance of

electrical systems
A) Electric shock and burns
B) Paper cuts
C) Bruises
D) Minor scratches

71.Most common electrical hazard are due to:

A) Ill-maintained electrical equipment
B) Faulty wiring
C) Use of electrical equipment with wet hands
D) All of the above

72. Which of the following is the safest way to disconnect an appliance?

A) Yank the cord from a distance (Incorrect)
B) Grip the plug and pull (Correct)
C) Turn off the switch and leave it plugged in
D) Unplug it with wet hands

73. Which of these is NOT a type of waste management?

A) Recycling
B) Landfill
C) Resource depletion
D) Biological Reprocessing

74. What does water use efficiency in agriculture measure?

A) The total amount of water used
B) The ratio of crop yield to water used
C) The quality of the water used for irrigation
D) The type of crops grown
75. Which of the following is the FIRST step in proper waste
management?
A) Recycle all waste materials
B) Identify the type of waste
C) Dispose of waste in a landfill
D) Evaluate the potential for reuse

76.What is the first step when diagnosing an electrical issue in a circuit?

A) Replace the fuse
B) Turn off the power
C) Consult the circuit diagram
D) Check for loose connections

77.Which tool is essential for measuring current in a live circuit?

A) Voltmeter
B) Ohmmeter
C) Ammeter
D) Megger

78.When prioritizing tasks in an electrical project, which should be

completed first?
A) High-voltage installations
B) Low-voltage installations
C) Safety inspections
D) Documentation
79.What is the primary benefit of using energy-efficient lighting?
A) Lower initial cost
B) Reduced energy consumption
C) Increased brightness
D) Easier installation

80.Which of the following is a renewable energy source commonly used in

electrical systems?
A) Coal
B) Natural gas
C) Solar power
D) Nuclear power

81.When working on a team project, which tool can help in effective

coordination and communication?
A) Individual notebooks
B) Team meetings and collaborative software
C) Personal calendars
D) None of the above

82.What is the best practice for ensuring that all team members
understand a complex electrical diagram?
A) Email the diagram without explanation
B) Discuss the diagram in a meeting and answer any questions
C) Assume everyone understands
D) Ignore questions to save time

83.Which of the following communication methods is most effective for

urgent updates?
A) Email
B) Face-to-face communication or phone calls
C) Weekly newsletters
D) Memos
84.Why is it important for electrical technicians to give and receive
feedback?
A) To criticize colleagues
B) To improve personal and team performance
C) To show off knowledge
D) To create misunderstandings

85.Which of the following is a reasonable accommodation for an

electrical technician with a physical disability?
A) Lowering workstations to wheelchair height
B) Providing more coffee breaks
C) Offering unlimited sick leave
D) Increasing the workload

86.What is disability diversity in the context of electrical technicians?

A) Hiring only individuals without disabilities
B) Ensuring equal opportunities for individuals with disabilities
C) Excluding individuals with disabilities from technical roles
D) Providing separate but equal facilities for disabled technicians

87.Why is disability diversity important in the workplace, especially for

roles like electrical technicians?
A) It increases company costs.
B) It reduces workplace productivity.
C) It enhances innovation and problem-solving.
D) It limits the range of skills in the workplace.
88. ...........................will help you understand and anticipate your
supervisor’ s needs and what actions need to be taken.
A) Ignoring
B) Negative Attitude
C) Practicing active listening skills
D) Being talkative

89. What are the potential hazards in the workplace?

A) Electrical Accident.
B) Exposure to Dangerous Chemicals.
C) Workplace Theft
D) All of the above

90. We must report all concerns of sexual harassment or inappropriate

sexual conduct to the ..................
A) Friends
B) Security
C) HR Director
D) Family

91. Housekeeping and cleanliness improve:

A) Money making
B) Efficiency and productivity
C) Stress
D) Negative Impression

92. ................ is the service/task one completes successfully within the

estimated time, with the end output satisfying the expectations of
everyone involved, including oneself.
A) Quality work
B) Smart work
C) Selfless work
D) Heavy work

93. Which is not the injuries related to electricity?

A) If the skin contacts the heat generated from electric arcs, it burns the
internal tissues.
B) Direct contact with exposed electrical circuits or energized conductors.
C) Electricity arcs circulating in the air can pass through a person who is
grounded.
D) Fracture of bones due to falling from the height.

94. Which of the following is a primary purpose of electrical safety signs

and labels in the workplace?
A) Enhancing interior decor
B) Providing information for safety
C) Directing traffic flow
D) Promoting company branding

95. The Second step in waste management is ...................

A) Identify Waste
B) Evaluate Waste
C) Manage Waste
D) Throw Waste
96. Which country uses significantly more water for irrigation compared to
China, Brazil, and the US to produce one unit of food crop?
A) India
B) Germany
C) Russia
D) United Kingdom

97. Name the Electrical Sign Board:

A) Step down
B) Highly flammable
C) High Voltage
D) Hot

98. What are the steps to analyse water efficiency and reduce water use
in your workplace?
A) Get management on side
B) Identify and implement water saving ideas
C) Assess water uses
D) All of the above

99. The essential factors to a positive work environment are

establishing good working relationship with______
a. Co-workers
b. Supervisor
c. Both a&b
d. Family
100. What are the tips for effective communication with your supervisor?
a. Be concise and straightforward
b. Practice active listening
c. Have a positive attitude and be open to feedback
d. All of the above

101. Importance of housekeeping and cleanliness

a. Improve efficiency and productivity
b. Helps in maintaining good control over the processes
c. Assist in maintaining the quality of the product
d. All of the above

102. Which is one of the major elements of housekeeping and

cleanliness at workplace
a. Trash management
b. Inadequate employee facilities
c. Not cleaning the floors
d. Inadequate lightning

103. Which is not the ways to produce quality work

a. Hold ourselves to the highest standard
b. Not staying focused and not following our schedule
c. Work with our team
d. Recognise mistake and take corrective action

104. What are the types of workplace electrical injuries

a. Electrocution
b. Falls
c. Electric shock
d. All of the above

105. Which are the Common electrical hazards

a. Use of flexible leads and extension cables
b. Correct use of replacement fuses
c. Properly maintained electrical equipment
d. Both a&c

106. We should only use equipment that is ______

a. Not grounded
b. Single – insulated
c. Non-insulated
d. Double -insulated

107. Which is not a type of waste management

a. Recycling
b. biological reprocessing
c. Incineration
d. Agricultural practices

108. Which is hazardous biological waste

a. Containing or contaminated with a radioactive isotope
b. Containing or contaminated with animals’ carcasses
c. Containing chemical like fluorescent lamps
d. Materials contaminated with chemical rags

109. What is the primary goal of maintaining good housekeeping at the

workplace?

A. To impress visitors
B. To ensure a safe and efficient working environment
C. To reduce employee workload
D. To increase the company's revenue

110.Which of the following is NOT a key outcome of achieving optimum

productivity and quality?
 A. Maintaining high work quality standards
B. Reducing product waste
C. Increasing resource consumption
D. Ensuring a clean working environment

111.What is the first step in implementing health and safety procedures?

A. Conducting safety drills

B. Identifying potential hazards
C. Providing personal protective equipment (PPE)
D. Writing a safety manual

112.Which of the following is a common safety precaution in electronic

assembly units?

A. Wearing loose clothing

B. Using non-conductive tools
C. Avoiding the use of gloves
D. Keeping the work area cluttered

113.What is the main purpose of waste management in an electrical

assembly unit?

A. To increase production speed

B. To reduce environmental impact
C. To maximize resource usage
D. To create new products

114.Which type of waste is NOT typically recyclable in an electronics

assembly unit?

A. Scrap metal
B. Plastic components
 C. Hazardous chemicals
D. Paper packaging

115.Why is conserving resources important in the workplace?

A. To reduce costs and environmental impact

B. To comply with government regulations
C. To make the workplace look neat
D. To increase the workload on employees

116.Which of the following is an effective method to conserve water in an

electrical assembly unit?

A. Using water-efficient fixtures

B. Increasing water usage for cleaning
C. Installing more water taps
D. Allowing leaks to persist

Question 117
What is one of the essential factors to a positive work environment?
a) High salaries
b) Establishing good working relationships with co-workers and
supervisors
c) Strict disciplinary measures
d) Extensive use of technology

Question 118
According to the handbook, what is crucial for creating strong
relationships at work?
a) Strict guidelines
b) Open line of communication
c) financial incentives
d) Regular team outings

Question 119
Before talking to your supervisor, what should you ensure?
a) The supervisor is not busy
b) You are clear about the goal of your conversation
c) You have a gift for the supervisor
d) The conversation is recorded

Question 120
Which method of communication should you choose when
communicating with your supervisor?
a) Only email
b) Only face-to-face
c) The method your supervisor prefers
d) Instant messaging

Question 121
What should you do if you have problems understanding someone with a
speech impairment?
a) Ignore them
b) Ask them to repeat what they said
c) Pretend to understand
d) Speak for them

Question 122
When interacting with someone who has a hearing disability, what is a
recommended practice?
a) Shout to make sure they hear you
b) Tap them on the shoulder to get their attention
c) Use sign language only
d) Write everything down

Question 123
Which is NOT a recommended tip for effective communication with your
supervisor?
a) Be concise and straightforward
b) Communicate regularly
c) Avoid scheduling meetings
d) Have a positive attitude

124. Before talking to the supervisor, one must make sure that s/he
a) Arrange face-to-face meeting.
b) Is clear about his goal of conversation
c) Have a positive attitude
d) Practise active listening

125. The rule of thumb in effective communication and a successful

relationship is
a) Being concise and straightforward
b) Practise active listening
c) To exhibit a positive attitude
d) Communicate regularly

126. It is important to report all concerns of sexual harassment or

inappropriate sexual conduct to
a) The employees
b) The family members
c) The HR director
d) The senior staffs

127. Sexual harassment is defined as unwelcome sexual advances,

requests for sexual favours, and other verbal or physical conduct of a
sexual nature by
a) Ministry of women and child development
b) Federal Equal Employment Opportunity Commission
c) United Nations women's Conference
d) Ministry of HRD

128. Subjecting, or threats of subjecting, an employee to unwelcome

sexual attention or conduct or intentionally making performance of the
employee's job more difficult because of that employee's sex is
a) A physical assault of a sexual nature
b) An example of prohibited conduct
c) Responding to sexual conduct in violation of the policy
d) A process of reporting grievances

129. An impairment that can be mental, physical, developmental,

cognitive, or emotional is called
a) Disease
b) Handicapped
c) Disability
d) Illness

130. If someone is in a wheelchair, you want to make sure you converse

with them at eye level, you may
a) Bend over and look them in their eyes.
b) Lean over the wheelchair as support
c) Pull up a chair&converse
d) Kneel to look them in their eye.

131. To get the attention of a person who has a hearing disability one
must not
a) Tap them on their shoulder
b) Speak clearly
c) Speak louder than your normal tone
d) Speak slowly
Unit 4:
132. Which of the following can cause dirt and dust particles to be
embedded under the skin or in the eye
a) Regular sweeping
b) Spills
c) Compressed air
d) Chemical spray

133. Which is the leading cause of accidents in workplace?

a) Inadequate lightening
b) Poor flooring
c) Spills
d) Aisle and stairways

134. The service/task one completes successfully within the estimated

time, with the end output satisfying the expectations of everyone involved,
including oneself is called
a) Efficiency
b) Quality work
c) Housekeeping
d) Productivity

135. You get the motivation to compete with yourself and raise the bar
when you
a) Walk the extra mile
b) Work with your team
c) Hold yourself to the highest standard
d) Stay focused and follow your schedule

136. Humans are ______ conductors of electricity

a) Very bad
b) Poor
c) Good
d) Very good

137. One should maintain a clearance of at least ____ from all electrical
panels
a) 2 meters
b) 2 feet
c) 3 meters
d) 3 feet

138. All the behaviours and acts necessary to handle the waste from its
inception to its final disposal is
a) biological reprocessing
b) Incineration
c) Waste disposal
d) Recycling

139. Which ways of waste management saves the government resources

needed for waste projects, provides thousands of jobs, and will make a
decent deal of money
a) Landfill
b) Recycling
c) biological reprocessing
d) Incineration

140. Which one of them is commonly used for the disposal of industrial
waste
a) Recycling
b) Landfill
c) biological reprocessing
d) Incineration

141. Fluorescent lamps, thermometers come under

a) Hazardous radioactive wastes
b) Non- hazardous solid wastes
c) Recyclable wastes
d) Hazardous chemical wastes.

142. All the electrical motors in the control of location____

a) mcc
b) pcc
C )transformer
D) none of these

143. Distribution and control of the various sources of the power used in
the industry____
a )Transformer
b ) mcc
C ) pcc
d )pcb

144. The ideal diode looks like-

a)short circuit
b)open circuit
c)phototransistor circuit

145. Electronic component manufacturing in India-

a)30%
b)20%
c)40%
d)20%

146. Types of impellers us used to handle clear liquids-

a) semi open impeller
b) closed impeller
c)open impeller
147. Which part of the centrifugal pump is used to increase the kinetic
energy of the flow?
a) bearing
b) casing
c)impeller

148. Electrical device that interrupts automatically with the flow of current
to provide a protection against and overloads or short is-
a) electrical connector
b) circuit breaker
c)lugs

149. A temperature sensitive resistor which work on the principle of

resistance is-
a) thermistor
b) inductor
c)capacitor

150. Which of the following provides a barrier against the exposure which
is possible within an environment that is contaminated?
a) ear plug
b) goggles
c) shoes
d) gloves

151.____ help to create, maintain and repair the electronic components

and equipment used in any device that involves electricity.
A. electrical technician
B. Electrician

152. ____ typically focus on electrical construction on a project basis.

A. Electrical technician
B. Electrician

153. A transformer induces ___ in the second coil.

A. Emf
B. Current
C. Resistance
D. Power

154. Total capacitance of capacitors in series is given by

A. 1/Ct = 1/C1 +1/C2 + ... 1/Cn
B. Ct=C1+ C2+ ... Cn
C. Ct= (C1+C2+...Cn)/n
D. 1/Ct= C1+C2+...Cn

155. Which device interop

automatically with the flow of current to provide a protection against
overload or short?
A. Circuit breaker
B. Motor control
C. Lugs
D. Electrical box

156. Category 3 garment of ESD clothing is __?

A. Static control and is not attached to the ground
B. ground able static control
C. Ground able static control that forms a bond with the skin of the person
to an identified ground path

157. Which component emits light due to recombination of electron with

electron holes?
A. LED
B. Diode
C. Resistor
D. IC

158. Which component store electrical energy as magnetic energy?

A. Inductor
B. Thermistor
C. Capacitor
D. Diode

159. Sustain in 5S refers to

A. Removing all item not needed
B. Arranging needed items so they become easy to find
C. Labelling items
D. Making a habit of properly maintaining correct procedure

160. A class B hazard causes

A. Permanent disability or loss of life or body part
B. Disability in temporary level or damage to workplace
C. Minor injury or illness that shall not be permanent

161. Full form of MCB?

a. Printed circuit board
b. Minatare circuit breaker
c. Residual current circuit breaker
d. None of the above

162. Who is responsible for installing wiring system into new buildings?
a. Electricians
b. Electrical technician
c. Electrical engineer
d. Mechanics

163. What is the percentage of electronic components manufacturing in

India
a. 20%
b. 80%
c. 30%
d. 35%

164. Passive parameter uses in DC

a. Impedance
b. Resistance
c. Both a & b
d. None of the above

165. __________is a rotor that is used to increase the kinetic energy of

the flow
a. Bearing
b. Impeller
c. shaft sealing
d. None of the above

166. Law that governed current and voltage output varies across to
current
a. Ohm’ s law
b. Kirchoff voltage law
c. Kirchoff current law
d. None of the above

167. In which type of current the strength remains constant

a. AC
b. DC
c. Both DC & AC
d. None of the above

168. HSE stands for?

a. Health, Safety, Environment, Security, Economics
 b. Health, Safety, quality, Environment
c. Health, Safety, Environment
d. Health, Social, Economics

169. A transformer induces ___________on second coil

a. Current
b. Power
c. Voltage or EMF
d. resistance

170. Zener diode is used as_____

a. an amplifier
b. a voltage regulator
c. a rectifier
d. a multivibrator

171. What is the full form of MCC in an electrical system?

A) Miniature Circuit Breaker
B) Motor Control Centre
C) Motor Car Centre
D) Merchant Category Codes

173. DFM stands for ..........

A) Door Frame Metal Detector
B) Design For Manufacturing
C) Design For Manufacturing Assembly
D) Decorated Frame Machine

174. .................. is the only passive parameter used in DC.

A) Resistance
B) Impedance
C) Capacitance
D) Reactance

175. The common name for series circuit is ........

A) Series Coupled
B) Parallel Coupled
C) Daisy-Chain Coupled
D) All of the above

176. What is a growth mindset?

a) Thinking that mistakes are normal
b) Thinking if I fail once, I will always fail
c) Not adapting to changes
d) Thinking mistakes are unacceptable

177. What is the first step in the decision-making process?

a) Implementing decision
b) Identifying problem
c) Generating options
d) Evaluating and learning from decisions

178. Which one of the following is NOT a common type of cover letter?
a) Application cover letter
b) Referral cover letter
c) Prospecting cover letter
d) Sales cover letter

179. Which of the following is NOT one of the 6Cs of effective

communication?
a) Clear
b) Correct
c) Creative
d) Courteous
180. What does "CC" in emails stand for?
a) Communicate Copy
b) Copy Correspondence
c) Carbon Copy
d) Contact Copy

181. Which of them is NOT a search engine?

a) Google
b) Bing
c) Yahoo
d) DuckGo

182. What is the purpose of the Right to Information (RTI) Act?

a) To allow citizens to access information from the government
b) To restrict information access to only government officials
c) To provide financial aid to the needy
d) To help citizens evade legal issues

183. Which is a key activity for career development according to the

workbook?
a) Identifying the career pathways
b) Only focusing on long-term goals
c) Avoiding market scans
d) Ignoring professional guidance

184. Which of the following is NOT considered an important interview

skill?
a) Preparing for interview questions
b) Positive body language
c) Extensive job experience
d) Clear communication

185. Which of the following schemes should you apply for enrolling in an
apprenticeship?

a) National Skill Development Scheme (NSDS)

b) National Apprenticeship Promotion Scheme (NAPS)
c) Pradhan Mantri Kaushal Vikas Yojana (PMKVY)
d) Skill India Initiative (SII)

ANSWERS

1. C
2. D
3. B
4. B
5. C
6. A
7. B
8. C
9. B
10. B
11. C
12. C
13. C
14. A
15. D
16. C
17. A
18. A
19. B
20. D
21. B
22. C
23. C
24. A
25. B
26. C
27. C
28. C
29. C
30. B
31. C
32. B
33. B
34. A
35. B
36. B
37. C
38. C
39. A
40. C
41. D
42. A
43. C
44. C
45. D
46. C
47. C
48. B
49. B
50. A
51. C
52. B
53. D
54. A
55. D
56. D
57. B
58. B
59. A
60. D
61. A
62. C
63. B
64. B
65. C
66. C
67. B
68. B
69. B
70. A
71. D
72. B
73. C
74. B
75. B
76. C
77. C
78. C
79. B
80. C
81. B
82. B
83. B
84. B
85. A
86. B
87. C
88. C
89. D
90. C
91. B
92. A
93. D
94. B
95. B
96. A
97. C
98. D
99. C
100. D
101. D
102. A
103. B
104. D
105. A
106. D
107. D
108. B
109. B
110. C
111. B
112. B
113. B
114. C
115. A
116. A
117. B
118. B
119. B
120. C
121. B
122. B
123. C
124. B
125. C
126. C
127. B
128. B
129. C
130. C
131. C
132. C
133. B
134. B
135. C
136. C
137. D
138. C
139. B
140. C
141. B
142. A
143. C
144. B
145. A
146. B
147. C
148. B
149. A
150. C
151. A
152. B
153. A
154. A
155. A
156. C
157. A
158. A
159. D
160. B
161. A
162. A
163. C
164. B
165. B
166. A
167. B
168. C
169. C
170. B
171. B
172. B
173. A
174. C
175. C
176. A
177. B
178. D
179. C
180. C
181. D
182. A
183. A
184. C
185. B