MOBILE AUDIO PRODUCT SUMMARY 2018

DIGITAL SIGNAL PROCESSORS POWER AMPLIFIERS ACM AMPLIFIERS

OEM INTEGRATION LINE DRIVERS BASS RESTORATION PROCESSORS

EQUALIZERS

CROSSOVERS

AUDIO MEASUREMENT TOOLS

DESIGNED AND ENGINEERED IN THE PACIFIC NORTHWEST

POWER AMPLIFIERS

AudioControl has paired our award winning

amplifier technology with powerful Matrix Digital
Signal Processing into the D-4.800™ and
D-6.1200™. AudioControl's DM Smart DSP app
allows complete control over 30 bands of EQ,
signal delay, phase correction and well known
features like patented AccuBASS®, GTO™ Signal
Sense and MILC™, plus an integrated input and
output RTA.
D-6.1200 D-4.800

Continuous Power S/N Ratio Linkwitz-Riley Crossover

MATRIX DSP Channels
Speaker
All Channels Driven (ref: rated THD+N
Bass Pass Option Dash
Level Inputs Processing Thru Port Remote
AMPLIFIERS (RMS) at 14.4V power) Mode(s) Freq. Range

125W @ 4Ω Low Pass

20 Hz - ACR-3
D-6.1200 6 8 200W @ 2Ω 102 dBa <0.01% Band Pass
20 kHz
AccuBASS Y Y
(optional)
400W Bridged (4Ω) High Pass

125W @ 4Ω Low Pass

20 Hz - ACR-3
D-4.800 4 6 200W @ 2Ω 102 dBa <0.01% Band Pass
20 kHz
AccuBASS Y N
(optional)
400W Bridged (4Ω) High Pass

Featuring OEM integration friendly features such as

channel summing and our patented AccuBASS®,
the LC-4.800™ and LC-6.1200™ multi-channel
amplifiers will change the game in factory system
upgrades, offering flexible crossovers, user friendly
signal routing and control. Spend less time on the
install and more time listening to music as it was
meant to be heard.

LC-6.1200 LC-4.800

Continuous Power S/N Ratio Linkwitz-Riley Crossover

MULTI-CHANNEL Channels
Speaker Level
All Channels Driven (ref: rated THD+N
Subsonic Filter Bass Pass Dash
Inputs (selectable) Processing Thru Remote
AMPLIFIERS (RMS) at 14.4V power) Mode(s) Freq. Range

125W @ 4Ω Low Pass

30 Hz - ACR-1
LC-6.1200 6 8 200W @ 2Ω 102 dBa <0.01% Band Pass
5 kHz
33 Hz / Off AccuBASS Y
(optional)
400W Bridged (4Ω) High Pass

125W @ 4Ω
Low Pass 30 Hz - ACR-1
LC-4.800 4 6 200W @ 2Ω 102 dBa <0.01%
High Pass 300 Hz
33 Hz / Off AccuBASS Y
(optional)
400W Bridged (4Ω)

No matter the install, you can be assured power

will meet and exceed expectations with the
LC-1.1500™ and LC-1.800™.

Enjoy loud, clean and articulate bass, combined

with AudioControl’s patented AccuBASS® circuit
- the only way to properly overcome factory bass
roll-off and heavily equalized factory bass settings.

LC-1.1500 LC-1.800

S/N Ratio Linkwitz-Riley Crossover

SUBWOOFER Channels
Speaker Level Continuous Power
(ref: rated THD+N
Subsonic Bass Dash
Inputs (RMS) at 14.4V Filter Processing Remote
AMPLIFIERS power) Mode(s) Freq. Range

850W @ 4Ω 30 Hz - ACR-1
LC-1.1500 1 2
1500W @ 2Ω
102 dBa <0.1% Low Pass
230 Hz
24 Hz AccuBASS®
(optional)

500W @ 4Ω 30 Hz - ACR-1
LC-1.800 1 2
800W @ 2Ω
102 dBa <0.1% Low Pass
230 Hz
24 Hz AccuBASS®
(optional)
DIGITAL SIGNAL PROCESSORS

These highly versatile digital signal processors contain the power of AudioControl processing through the flexible, accessible and
feature-packed DM Smart DSP™ app. Configure channel summing, 30 bands of EQ, signal delay and phase correction, plus
AudioControl proprietary features like AccuBASS®, GTO™ Signal Sense, and MILC™. Integrated input and output RTA’s aid in
channel summing and equalization.

The Option Port on the DM-810™ and DM-608™ allows for hi-res streaming, Bluetooth connectivity and DSP setup. It also opens
up future proprietary connections for additional inputs, controllers and interface solutions.

DM SMART DSP APP

DM Smart DSP app is

available for PC and Mac
and will feature tablet and
smart phone support via
the upcoming bluetooth
streamer/programmer.
DM-810 DM-608

Speaker GTO™ Frequency Maximum Dash Option

Preamp Digital Preamp Channel
MODEL Level
Inputs Inputs Outputs Summing
Signal THD
Response
AccuBASS®
Output Level Remote Port
Inputs Sense

1 x S/PDIF 20 Hz - ACR-3
DM-810 8 8
1 x Optical
10 Y Y 0.01%
24 kHz
Y 10 Vrms
(optional)
Y

1 x S/PDIF 20 Hz - ACR-3
DM-608 6 6
1 x Optical
8 Y Y 0.01%
24 kHz
Y 10 Vrms
(optional)
Y

OEM INTEGRATION

Every make, model, and year of car is different, so installation of an upgraded sound system can be tricky. Most factory radios
today are so much more than the radio. They are the command center for the vehicle and changing them gets very expensive (if
even possible) and you do not get much of a sound improvement.

With industry leading features such as intuitive channel summing, patented AccuBASS® bass compensation, GTO™ Signal Sense,
signal delay and EQ, AudioControl Factory System Upgrades Make Good Sound Great!

LC2i LC6i LC7i LC8i LCQ-1

Speaker GTO™ Frequency Signal Maximum Dash Remote

Channel Preamp
MODEL Level
Summing
Aux Input
Outputs
Signal
Response Delay
Equalizer AccuBASS®
Output Level (level control)
Inputs Sense

10 Hz- ACR-3
DQ-61 6 Y N 6 Y
22 kHz
Y Y Y 7.5 Vrms
(included)

10 Hz - ACR-2
LCQ-1 6 Y N 6 Y
22 kHz
N Y Y 7.5 Vrms
(optional)

10 Hz - ACR-1
LC2i 2 N N 4 Y
100 kHz
N N Y 9.5 Vrms
(optional)

10 Hz - ACR-1
LC6i 6 Y N 6 Y
22 kHz
N N N 9.5 Vrms
(optional)

10 Hz - ACR-1
LC7i 6 Y N 6 Y
22 kHz
N N Y 8.5 Vrms
(optional)

10 Hz - ACR-3
LC8i 8 Y Y 8 Y
22 kHz
N N N 8.5 Vrms
(included)
ACM AMPLIFIERS

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild.
Compact size, high power and the ability to help integrate with factory stereo systems are features that assure “Making Good
Sound Great” can happen in any installation. Reversable cover plates allow flexible mounting options when paired with
AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces.

ACM-1.300 ACM-2.300 ACM-4.300

Continuous Power S/N Ratio Linkwitz-Riley Crossover

MULTI-CHANNEL Channels
Speaker
All Channels Driven (ref: rated THD+N
Frequency Subsonic Bass
Level Inputs Response Filter Processing
AMPLIFIERS (RMS) at 14.4V power) Mode(s) Settings

80 Hz
40W @ 4Ω
ACM-4.300 4 4
75W @ 2Ω
102 dBa <0.01% 20 Hz - 20 kHz High Pass 120 Hz 32 Hz NA
Bypass

80 Hz
75W @ 4Ω
ACM-2.300 2 2
150W @ 2Ω
102 dBa <0.01% 20 Hz - 20 kHz High Pass 120 Hz 32 Hz NA
Bypass

80 Hz
150W @ 4Ω
ACM-1.300 1 1
300W @ 2Ω
102 dBa <0.01% 20 Hz - 20 kHz Low Pass 120 Hz 24 Hz AccuBASS
Bypass

PREAMP LINE DRIVERS

Give your system the boost that it needs. The high headroom power supply of our line drivers
raises any preamp signal up to 24 dB. This provides better dynamic range and a quiet, noise-
free signal. Perfect for driving those long cable runs from the front to the back of the vehicle and
achieving maximum sound quality and SPL.

Adjust volume output from the comfort of the driver’s seat with the optional ACR-1 remote.
MATRIX PLUS OVERDRIVE PLUS

Preamp Frequency Subsonic Filter Maximum Maximum

MODEL Preamp Inputs
Outputs
S/N Ratio THD
Response (programmable) Output Gain Output Level
Dash Remote

10 Hz - 9.5 Vrms ACR-1

MATRIX PLUS 6 6 > 110 dB 0.005%
100 kHz
33 Hz 24 dB
13 V Peak (optional)

10 Hz - 9.5 Vrms ACR-1

OVERDRIVE PLUS 2 2 > 110 dB 0.005%
100 kHz
N/A 24 dB
13 V Peak (optional)

BASS RESTORATION PROCESSORS

For more than twenty years, AudioControl’s The Epicenter has been
the most sought after bass restoration processor on the planet.
The Epicenter contains a bass maximization circuit that accurately
recreates and injects low frequency information back into the signal
path. This means The Epicenter will give more low frequency bass
THE EPICENTER THE EPICENTER PLUS THE EPICENTER INDASH impact to your favorite music.

Speaker Level Preamp Subsonic Filter Maximum

MODEL Inputs
Preamp Inputs Aux Input
Outputs
S/N Ratio THD
(programmable) Output Level
Dash Remote

ACR-1
THE EPICENTER N/A 2 N 2 110 dB 0.003% 33 Hz 13.5 Vrms
(included)

ACR-2
THE EPICENTER PLUS 2 2 Y 2 110 dB 0.003% 33 Hz 9.5 Vrms
(included)

THE EPICENTER INDASH 2 2 N 2 110 dB 0.003% N/A 13.5 Vrms N/A

EQUALIZERS AND PROCESSORS

Maximize overall system performance!

AudioControl equalizers offer precise control
to compensate for factors that interfere with
sound quality. Adjust your system’s response
for your car’s acoustics and your personal
musical preferences. Dial in your front stage
even more with built-in signal delay in the
DQDX EQS EQL DQDX™.
EQX

Speaker Frequency Linkwitz-Riley Subsonic Filter Signal Maximum Dash

Preamp Preamp
MODEL Level
Inputs Outputs
S/N Ratio THD
Response
Crossover
(programmable) Delay Output Level Remote
Inputs (programmable)

20 Hz- ACR-3
DQDX N/A 6 6 N/A 0.01%
22 kHz
Y 33 Hz Y 7.5 Vrms
(included)

10 Hz -
EQS 4 6 6 110 dB 0.003%
100 kHz
N 33 Hz N 9.5 Vrms N/A

10 Hz -
EQX 2 2 8 110 dB 0.003%
20 kHz
Y 33 Hz N 7.5 Vrms N/A

10 Hz -
EQL 2 2 2 110 dB 0.003%
100 kHz
N 33 Hz N 7.5 Vrms N/A

IN-DASH AUDIO EQUALIZERS

AudioControl’s in-dash equalizers are true audiophile quality products in

a half-din chassis. Using an after-market head unit, tablet or any other
source with analog outputs, compensate for the acoustics of the vehicle,
and recapture the excitement and vibrancy of concerts. Auxiliary inputs
allow connection of a second source.
THREE.2 FOUR.1i

Frequency Linkwitz-Riley Crossover Maximum

Preamp Preamp
MODEL Inputs
Aux Input
Outputs
S/N Ratio THD
Response Output Level
Outputs Slope(s)

20 Hz - Low Pass
THREE.2 2 Y 6 110 dB 0.01%
20 kHz High Pass
24 dB/oct 9.5 Vrms

20 Hz -
FOUR.1i 2 Y 4 110 dB 0.01%
20 kHz
N/A N/A 9.5 Vrms

ELECTRONIC CROSSOVERS

Clean, crisp, smooth sound without distortion — that is what you get with an
AudioControl electronic crossover. Advanced programmable and steep slope filtering
trims frequencies to minimize distortion and power waste. The result: complete, clear,
and solid sound.

The 6XS is a powerful 3-way crossover with independent subwoofer control. Choose
the 2XS for a clean 2-way set up.
6XS 2XS

Linkwitz-Riley Crossover
Preamp Preamp Frequency Subsonic Filter Maximum Dash Remote
MODEL Inputs Outputs
S/N Ratio THD
Response (programmable) Output Level (level control)
Outputs Slope(s)

Low Pass
10 Hz - 24 dB/oct ACR-1
6XS 6 8 > 110 dB 0.005%
100 kHz
Band Pass
18 dB/oct
33 Hz 9.5 Vrms
(included)
High Pass

15 Hz - Low Pass
2XS 2 4 > 115 dB 0.005%
20 kHz High Pass
18 dB/oct 33 Hz 9.5 Vrms N/A
AUDIO MEASUREMENT TOOLS

iOS MEASUREMENT Audio Charging Connector The SA-4100i and SA-4140i SPL are
Max SPL
MICROPHONES Output Pass Thru Type SA-4100i calibrated, full range, omni-directional
test and measurement microphones
SA-4100i 120 dB N N Lightning for direct connection to iOS devices.
SA-4140i SPL
Mobile Tools app (free on the App
SA-4140i SPL 140 dB Y Y Lightning Store) gives you RTA, FFT and more. Choose SA-4140i SPL for
high-SPL readings—up to 140 dB SPL—and an audio output.

AUDIO Internal Connector DM-RTA™ is an class compliant USB audio

Inputs Outputs
INTERFACES Battery Type interface/microphone preamp with balanced
line I/O and optical out. Use AudioControl's
XLR TRS
DM-RTA TRS Optical
Y USB RTA/Oscilloscope app and the DM-RTA™ to
test any system, speakers, environment imaginable.

STANDALONE Scoring More than three decades spent on tour, in

Inputs Outputs RTA
AUDIO ANALYZER Software the studio, and in the install bay has made
XLR IASCA
the SA-3052A™ the most recognizable
1/3
SA-3052A TRS TRS
Octave
MECA Real Time Analyzer anywhere. Includes a
RCA USACi
calibrated measurement microphone and battery.

ACCESSORIES

DASH REMOTES
Using carefully selected resistors and
Style
(Level and Programming Controls) a Zobel Network, the AC-LGD has
been designed to generate "load" and
stabilize signal from the factory system
270°
ACR-1 Potentiometer
to ensure the best possible audio. Installed between the
factory speaker outputs and your line output converter.

Supported Products: The Epicenter, LC2i, LC6i, LC7i, Overdrive Plus, Matrix Plus, 6XS, LC-4.800, LC-6.1200, LC-1.800, LC-1.1500
LOAD RESISTORS
AC-LGD
LOAD GENERATING DEVICE
Endless Rotary
ACR-2 Encoder
Some AudioControl products use PFM or
crossover modules to set the subsonic filter
Supported Products: LCQ-1, The Epicenter Plus
and crossover points. Available in a variety
of frequencies.
Endless Rotary
ACR-3 Encoder CROSSOVER / PFM MODULES
18 DB/OCTAVE
Supported Products: LC8i, DQ-61, DQDX, DM-810, DM-608, D-4.800, D-6.1200 24DB/OCTAVE

Address:
AudioControl
22410 70th Ave W
Mountlake Terrace, WA 98043

Contact Us:
Tel. 425.775.8461
Web: www.audiocontrol.com
Questions: [email protected]

©Copyright 2018 AudioControl, Inc. All rights reserved. Features, specifications and appearance subject to change without notice. No part of this document may be reproduced, duplicated or transmitted without the express approval of AudioControl.