Rev By Date Description

NEW FENCING

EXTENSION OF
EXISTING DRAIN MIN. 3.5m WIDE (BOTTOM WIDTH) MASONRY DRAIN SEDIMENT TRAP GABION MATTRES

VARIES 500 2000 VARIES 2000 500 VARIES 9700

2000

500
400
500

400
3233 3233 3233

400
400 9700 400

2425

GABION MATTRES
RC CROSSING

CONSTRUCTION JOINT

CONSTRUCTION JOINT
FLOW FLOW
CENTRELINE DIRECTION DIRECTION
3500

4850
OF SEDIMENT TRAP

150 150 150 150

TRASH RACK
WITH 50 mm
APERTURE SIZE

2425
400

NOTES

400
1. VERTICAL CONSTRUCTION JOINT SHALL
500

400
BE AT EVERY 12m & VERTICAL

500
NEW
FENCING

PROJECT CONTRACTOR
230mm THK GABION MATTRES
WITH ROCK FILLING
SIZE 75-150mm

NEW FENCING

EXTENSION OF HANDRAIL TO ARCHITECT DETAILS INSIDE

EXISTING DRAIN MIN. 3.5m WIDE (BOTTOM WIDTH) MASONRY DRAIN SEDIMENT TRAP GABION MATTRES WETLAND

VARIES 500 2000 VARIES 2000 500 VARIES 9700 2400 PROJECT SUPERVISOR
- SELECTED STONES
50mm PVC SPOUT
{ NOTES:
250

250

JOINTED WITH MORTAR.

@1m C/C RC CROSSING THROUGH
RC CROSSING 1.25% -MORTAR JOINT TO BE
250

CROSSFALL 50mm PVC SPOUT CEMENT-SAND RATIO 1:3 STONES

TOP OF WALL TOP OF WALL 1.25% @1.0m c/c TRASH RACK WITH
@1m C/C THICKNESS MIN.
CROSSFALL 50mm APERTURE SIZE
10mm-max. 15mm
TOP OF WALL
- SELECTED STONES

FLOW
T10-200
BOTHWAYS LAP 500mm
JOINTED WITH MORTAR.
-MORTAR JOINT TO BE
CEMENT-SAND RATIO 1:3
{ NOTES:
THROUGH
STONES
DIRECTION INVERT OF BEND 100mm AT ENDS T10-200 THICKNESS MIN. @1.0m c/c PROJECT CLIENT AND FUNDERS
DRAIN BOTHWAYS LAP 500mm 10mm-max. 15mm
BEND 100mm AT ENDS

100
2000
400

400
3T8 + T8-200 CLIPS
200 150
T10-200
400

1000
BOTHWAYS LAP 500mm
225-250mm THK BEND 100mm AT ENDS
RC BASE

GROUNDWORKS DETAIL
(REFER TO DWG - SELECTED STONES
230mm THK GABION MATTRES

{
NO.24-115-L111&L112 NOTES: JOINTED WITH MORTAR.
THROUGH -MORTAR JOINT TO BE 225mm THK WITH ROCK FILLING
STONES CEMENT-SAND RATIO 1:3 RC BASE SIZE 75-150mm
@1.0m c/c THICKNESS MIN.
GROUNDWORKS DETAIL
10mm-max. 15mm
(REFER TO DWG
NO.24-115-L111&L112

T10-200
4T10 +
OF SEDIMENT

100
CENTRELINE

400 400 BOTHWAYS LAP 500mm

TOP OF WALL T8-200 LINKS
BEND 100mm AT ENDS
100

3T8 + T8-200 CLIPS 3T8 + T8-200 CLIPS

TRAP

1 1
1200

1200

EXISTING GROUND EXISTING GROUND T10-01-200

5 5 2H
150

400 400 BOTHWAYS PROJECT

400

LEVEL LEVEL
SELECTED STONES T10-200 BOTHWAYS SELECTED STONES 500
NOTES: SELECTED STONES JOINTED WITH MORTAR, JOINTED IN MORTAR LAP 500mm JOINTED IN MORTAR SELECTED STONES JOINTED WITH MORTAR, { NOTES:
THROUGH
STONES { MORTAR JOINT TO BE CEMENT-SAND RATIO 1:3
THICKNESS MIN. 10mm-MAX. 15mm
75mm Ø PVC
WEEPHOLES
AT EVERY 1500mm
BEND 100mm AT ENDS 75mm Ø PVC
WEEPHOLES
AT EVERY 1500mm
MORTAR JOINT TO BE CEMENT-SAND RATIO 1:3
THICKNESS MIN. 10mm-MAX. 15mm
THROUGH
STONES
200
T10-01-200
BOTHWAYS WETLAND REHABILITATION IN THE
@1.0m c/c @1.0m c/c

H
1000
1000

300x300x300mm POCKETS
FILLED WITH AGGREGATE 20/40
6000
300x300x300mm POCKETS CITY OF KIGALI, RWANDA
FILLED WITH AGGREGATE 20/40
IN GEOTEXTILE MEMBRANE
225

IN GEOTEXTILE MEMBRANE
SURROUND AT WEEP HOLE. SURROUND AT WEEP HOLE. DRAWING TITLE
225

STONE ANCHORS TO BE MINIMUM 300mm

HIGH AND FIXED AT 500mm C/C IN 500

COVER
50mm
STAGGERED POSITION GROUNDWORKS DETAIL
STONE ANCHORS TO BE MINIMUM 300mm
HIGH AND FIXED AT 500mm C/C IN
TYPICAL SEDIMENT
(REFER TO DWG
NO.24-115-L111&L112
STAGGERED POSITION CONSTRUCTION JOINTS NOTES: TRAP DETAIL TYPE 6
1. HORIZONTAL JOINTS TO BE BRUSHED WITH STIFF BRUSHER AIDED BY A WATER SPRAY AT
LOW PRESSURE WITHIN 4 HOURS OF CONCRETING TO REMOVE LAITANCE AND ROUGHEN Drawn by: Checked by:
CONCRETE SURFACE
Scale

2. VERTICAL JOINTS TO BE HACKED 48 HOURS AFTER CONCRETING WITH HAND-HELD

PERCUSSIVE TOOL TO REMOVE LAITANCE AND ROUGHEN SURFACE 1:50 NH/DB YL/NR
Date Project No.
SEPT 2024 24-115
Drawing No. Rev No.

24-115-L106 C1