Scribd
Upload
78 views

Wooden_Doors_Method_Statement

This method statement outlines the procedures for the fabrication, supply, and installation of wooden doors, including fire-rated options, within a project scope. It details material requirements, fabrication processes, installation steps, and finishing techniques, ensuring compliance with relevant standards and project specifications. Additionally, it emphasizes the importance of proper documentation and records for quality control and safety compliance.

Uploaded by

muzafar hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
78 views

Wooden_Doors_Method_Statement

This method statement outlines the procedures for the fabrication, supply, and installation of wooden doors, including fire-rated options, within a project scope. It details material requirements, fabrication processes, installation steps, and finishing techniques, ensuring compliance with relevant standards and project specifications. Additionally, it emphasizes the importance of proper documentation and records for quality control and safety compliance.

Uploaded by

muzafar hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Method Statement for Wooden Doors

Installation
1.0 OBJECTIVE
To define the procedure for the fabrication, supply, and installation of wooden doors,
including fire-rated doors, within the project scope.

2.0 SCOPE
This method statement covers the entire process of fabricating and installing wooden doors,
including non-fire rated and fire-rated doors, within the defined project area.

3.0 REFERENCE
3.1 Project Approved Drawings
3.2 Relevant National or Local Standards for Wooden Door Installation
3.3 Manufacturer’s Recommendations for Wooden Doors
3.4 Fire Safety and Protection Standards for Wooden Doors

4.0 PROCEDURE

4.1 MATERIAL REQUIREMENTS


4.1.1 The materials to be used for wooden door fabrication and installation shall include:
- Wooden doors (solid core or veneered)
- Hardwood and softwood framing materials
- Fasteners and sealing materials
- Fire-rated doors (if applicable)
All materials must be approved by the project engineer before use on-site.

4.2 FABRICATION
4.2.1 Timber used for doors shall be free from unsound knots, dead knots, or any defects.
4.2.2 All timber shall be treated for protection against wood-destroying organisms.
4.2.3 The doors shall be fabricated with precision, ensuring that all dimensions match the
approved drawings.
4.2.4 Fire-rated doors shall meet the required fire resistance standards as per the project
specifications.
4.3 INSTALLATION
4.3.1 Ensure the door frame is correctly fixed in place before installing the door.
4.3.2 Verify that the door opening aligns with the approved dimensions for proper fitment
of the door.
4.3.3 Install the door carefully, ensuring proper alignment with the frame and sufficient
clearance for smooth operation.
4.3.4 Fix the door securely, ensuring all hardware components (e.g., hinges, locks) are
properly installed and functional.
4.3.5 Ensure the door operates smoothly, including proper locking and unlocking
mechanisms.

4.4 FINISHING AND PROTECTION


4.4.1 Apply a finish to the wooden doors as specified, including painting, staining, or
varnishing.
4.4.2 Ensure that the finish is applied evenly and according to the manufacturer’s
instructions.
4.4.3 Protect the completed door installation from damage during subsequent construction
activities by covering or shielding the doors.

5.0 RECORDS
5.1 Material Approval Records
5.2 Inspection Reports for Door Fabrication and Installation
5.3 Certification for Fire-rated Doors (if applicable)
5.4 Quality Control Inspection Reports for Door Operation and Finishing

6.0 ATTACHMENTS
6.1 Quality Control Checklists for Wooden Door Installation
6.2 Project Approved Drawings
6.3 Material Submittal Approval Certificates
6.4 Fire Safety Compliance Documentation (if applicable)

You might also like