Scribd
Upload
213 views3 pages

SAE AMS5737P-2018 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing

AMS5737P is a material specification for corrosion and heat-resistant steel, detailing its composition and heat treatment processes. The document has been reaffirmed in 2018 to comply with SAE's five-year review policy. It serves as a voluntary guideline for users regarding the material's applicability and suitability.

Uploaded by

mtmccli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
213 views3 pages

SAE AMS5737P-2018 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing

AMS5737P is a material specification for corrosion and heat-resistant steel, detailing its composition and heat treatment processes. The document has been reaffirmed in 2018 to comply with SAE's five-year review policy. It serves as a voluntary guideline for users regarding the material's applicability and suitability.

Uploaded by

mtmccli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

AEROSPACE AMS5737™ REV.

MATERIAL SPECIFICATION Issued 1959-01


Revised 2006-06
Reaffirmed 2018-10

Superseding AMS5737N

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing


15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
Consumable Electrode Melted
1650 °F (899 °C) Solution and Precipitation Heat Treated
(Composition similar to UNS S66286)

RATIONALE

AMS5737P has been reaffirmed to comply with the SAE five-year review policy.

__________________________________________________________________________________________________________________________________________
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely
voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and
suggestions.
Copyright © 2018 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) SAE values your input. To provide feedback on this
Tel: +1 724-776-4970 (outside USA) Technical Report, please visit
Fax: 724-776-0790 http://standards.sae.org/AMS5737P
Email: [email protected]
SAE WEB ADDRESS: http://www.sae.org
SAE INTERNATIONAL AMS5737™P 2 OF 7
SAE INTERNATIONAL AMS5737™P 3 OF 7

You might also like