Scribd
Upload
5 views

Software Installation Guide

This document is a software installation guide for Analyst version 2.3, aimed at new users. It outlines system requirements, installation steps, troubleshooting tips, and common errors. Users must ensure compatibility with hardware and software before installation and can refer to external resources for additional assistance.

Uploaded by

manaspenkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

Software Installation Guide

This document is a software installation guide for Analyst version 2.3, aimed at new users. It outlines system requirements, installation steps, troubleshooting tips, and common errors. Users must ensure compatibility with hardware and software before installation and can refer to external resources for additional assistance.

Uploaded by

manaspenkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Software Installation Guide: Analyst 2.

3
This is a software installation guide for the Analyst software, version 2.3. This is for new users
who have purchased the product but do not have any version installed.

System Requirements:

Software: Windows 11.0.1 or newer, Linux

Hardware:
Minimum:
●​ Intel Core i3 or equivalent
●​ 2 GB of RAM
●​ 40 GB of disk storage
​
​ Recommended:
●​ Intel Core i5 or equivalent
●​ 4 GB of RAM
●​ 60 GB of disk space

Configuration:
●​ Ensure adequate disk storage (at least 40 GB of storage).
●​ Note: Software is not compatible with Pro ID, Quant, or Blast software.

Installation and Configuration Instructions:


1.​ Download software from www.downloadanalyst.com.
2.​ Open the downloaded file.
3.​ Once the file is launched on the start-up page, click configure.

4.​ Input the correct IP address of the desired network. If you do not know how to find the IP,
refer to External Resources. Hit ok when done.

5.​ When ready to install the software, hit install. If there are any errors during the
installation, refer to Troubleshooting.

6.​ When the software is installed, restart the computer and open the software again.
Troubleshooting:
●​ If software/hardware requirements are not met, the software may not install correctly.
Refer back to the requirements section.

Common errors:
●​ Error message ERROR202: There may be anti-virus software blocking the installation.
To bypass this security, run the installation as an Administrator. Refer to External
Resources for additional help.
●​ Error message NETWORK1: The internet connection is not secure. Refer back to steps
4 and 5 to retry the network connection. If this does not resolve the error, restart the
network router.

External Resources:
Software User Manual
How to find my IP
How to run an installation as an Administrator

You might also like