DeviceManager Demo Usage Guide

Issue 01
Date 2019-05-31

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: http://e.huawei.com

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. i

DeviceManager Demo Usage Guide Preface

Preface

Purpose
This document describes how to download and install OceanStor DeviceManager Demo, and
how to use Demo and troubleshoot the common issues.

Intended Audience
This document is intended for:

l Installation and commissioning engineers

l Technical support engineers

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Symbol Description

Indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.

Calls attention to important information, best practices

and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. ii

DeviceManager Demo Usage Guide Contents

Contents

Preface................................................................................................................................................ ii
1 Overview......................................................................................................................................... 1
2 Demo Usage Guide....................................................................................................................... 2
2.1 Preparations.................................................................................................................................................................... 2
2.2 Installing Demo.............................................................................................................................................................. 3
2.3 Starting the Demo Service.............................................................................................................................................. 6
2.4 Logging In to Demo....................................................................................................................................................... 7
2.5 Experiencing Storage Systems' Functions......................................................................................................................8
2.6 Operations.....................................................................................................................................................................10

3 FAQ................................................................................................................................................ 12
3.1 What Can I Do When Demo Quits Unexpectedly During Startup?............................................................................. 12
3.2 Processes Occupied by the Demo.................................................................................................................................13
3.3 TCP Ports Occupied by the Demo................................................................................................................................13
3.4 Solving the Problem of TCP Port Occupation by Other Processes.............................................................................. 13
3.5 Disk Space Used by the Demo..................................................................................................................................... 15
3.6 How to initialize the Demo data?................................................................................................................................. 15
3.7 How Can I Switch Over Storage Device Types?..........................................................................................................15

A How to Get Help.........................................................................................................................17

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. iii

DeviceManager Demo Usage Guide 1 Overview

1 Overview

OceanStor DeviceManager is an integrated storage management platform designed for all

HUAWEI storage systems. Using OceanStor DeviceManager, you can configure, manage, and
maintain your storage devices with ease.
As the needs grow for exchanges and trainings on HUAWEI storage device operation and
management, the simulated version of OceanStor DeviceManager, OceanStor DeviceManager
Demo (Demo for short), is developed to provide you with close-to-real environment
experience and understandings on HUAWEI storage systems.

Restrictions
Configuration data provided by Demo is generated based on scenario simulations. You can
perform simulated operations such as viewing and configuring on Demo. However, the
operation results may differ from those of OceanStor DeviceManager in actual scenarios.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 1

DeviceManager Demo Usage Guide 2 Demo Usage Guide

2 Demo Usage Guide

This section describes how to run Demo and how to use Demo to experience storage systems'
functions and features.

2.1 Preparations
Check the Demo operating environment before running and using Demo.
2.2 Installing Demo
This section describes how to install Demo.
2.3 Starting the Demo Service
After installing Demo, you must start the Demo service to access Demo.
2.4 Logging In to Demo
You can log in to Demo to configure and use basic functions of DeviceManager.
2.5 Experiencing Storage Systems' Functions
HUAWEI storage systems are configured and managed by using OceanStor DeviceManager.
You can use the simulated scenarios on Demo to experience various functions of the storage
systems.
2.6 Operations
This section describes how to close or uninstall Demo.

2.1 Preparations
Check the Demo operating environment before running and using Demo.

Procedure
Step 1 Check the Demo operating environment.
Ensure the available system disk space of the host that the host running Demo is no less than
1 GB.
NOTE

Demo is installed in system disk by default. You cannot change the installation path. The system disk
with less than 1 GB capacity available may cause Demo running failure.

Step 2 Prepare the Demo installation file.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 2

DeviceManager Demo Usage Guide 2 Demo Usage Guide

1. Obtain the Demo installation package.

– If you are an enterprise network user, perform the following steps to obtain the
software package:
a. Log in to the Huawei support website http://support.huawei.com/enterprise.
b. In the search field, enter product model, and select a path from the paths that are
automatically displayed. On the displayed document page of the product, find the
corresponding DeviceManager Demo installation package.
c. ClickXXX DeviceManager Demo Installation Package, and select Download in the
upper right corner of the page that is displayed, or click to download the
package containing the Demo in the middle of the page that is displayed.
NOTE

The package contains the DeviceManager Demo installation software and related guides.
– If you are a carrier network user, perform the following steps to obtain the software
package:
a. Log in to the Huawei support website http://support.huawei.com/carrier.
b. In the search field, enter a product model, and select a path from the paths that are
automatically displayed. On the displayed document page of the product, find the
corresponding DeviceManager Demo installation package.

c. Click XXX DeviceManager Demo Installation Package, and click at the end of
the document, or click Download in the middle of the page that is displayed to
download the package containing the Demo.
NOTE

The package contains the DeviceManager Demo installation software and related guides.

NOTE

To download software packages from Huawei support website, you must have the download
permission. Otherwise, you cannot download. To obtain the permission, please apply for the
permission on the website.
2. Download the verification tool and guide for OpenPGP signature.
NOTE

Downloading address: http://support.huawei.com/enterprise/toolsinfo?

lang=zh&idAbsPath=0602_ROOT&pid=0602_ROOT&show=showVDetail&toolId=TL1000
000054.
3. See OpenPGP Signature Verification Guide to verify the integrity of the installation
package.
4. Decompress the installation package to obtain the installation file.

----End

2.2 Installing Demo

This section describes how to install Demo.

Prerequisites
You have obtained the Demo installation file.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 3

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Procedure
Step 1 Double-click the installation file.
The installation wizard welcome page is displayed.

Step 2 Click Next.

The installation wizard preparation page is displayed.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 4

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Step 3 Click Install.

The system starts to install Demo.
Step 4 Before installation completes, the system prompts to run the Demo when the system starts or
not. Based on actual requirement, select OK or Cancel.

Step 5 Click Finish to complete Demo installation.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 5

DeviceManager Demo Usage Guide 2 Demo Usage Guide

----End

Follow-up Procedure
Check whether the installation is correct.
1. Select Start > All Programs.
If the installation is correct, the DeviceManagerDemoforXXX menu item is added into
All Programs.
2. Go to the root directory of system disk.
If the installation is correct, the DeviceManagerDemoforXXX folder is added into the
root directory.
NOTE

XXX indicates the product model.

2.3 Starting the Demo Service

After installing Demo, you must start the Demo service to access Demo.

Prerequisites
l Demo has been installed.
l The 8088, 8989, and 8080 ports of the operating system are not used.
NOTE

If one of these ports is used by other applications, see 3.4 Solving the Problem of TCP Port
Occupation by Other Processes.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 6

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Context
l Only one Demo service can be started at a time.
l The Demo service can be started by the administrator only. If you are not an
administrator, please select the start demo, right-click the blank area and choose
Administrator from the shortcut menu that is displayed.

Procedure
Step 1 In the desktop of your maintenance terminal, choose Start > All Programs >
DeviceManagerDemoforXXX > start demo.
The Demo service startup window is displayed. The startup window will automatically close
after the Demo service is started.
----End

2.4 Logging In to Demo

You can log in to Demo to configure and use basic functions of DeviceManager.

Prerequisites
Demo service has been started.

Procedure
Step 1 Open a browser on the host. In the address box of your browser, enter https://localhost:8088/
or https://127.0.0.1:8088. If you access the Demo through the browser on another host,
replace localhost or 127.0.0.1 with the IP address of the current host.
NOTE

l You may fail to log in to the Demo by clicking the preceding IP address. Therefore, enter the IP
address in the address box of the browser and press Enter to log in to the Demo.
l Host IP address is the host that has started Demo service. Please ensure that the two hosts can access
each other through the network.
l If you modify the port (default port is 8088) that Demo uses when starting the Demo service, you
must change 8088 to the port you modify when logging in to Demo. Otherwise, the login fails.

The certificate error page is displayed. Here uses Windows Internet Explorer as an example.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 7

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Step 2 In the certificate error page, click Continue to this website (not recommended)..

The Demo login page is displayed.

Step 3 In the Demo login page, click Log In.

NOTE

A user name and the password are preset for Demo. Therefore, you do not need to enter the user name
and the password.

The Demo home page is displayed.

----End

Follow-up Procedure
After you log in to Demo, you can experience functions and features provided by storage
systems. You can also watch the quick start multimedia materials to learn common scenarios
and their operation procedures.

2.5 Experiencing Storage Systems' Functions

HUAWEI storage systems are configured and managed by using OceanStor DeviceManager.
You can use the simulated scenarios on Demo to experience various functions of the storage
systems.

#EN-US_TOPIC_0148111040/experience_function_tab01 provides common operation

guidance. For detailed operation procedures, see the online help document in Demo.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 8

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Table 2-1 Common operation guidance

Menu Function

allows you to monitor storage devices and their components, and set related
parameters.

l LUN allows you to create and manage LUNs.

l Host allows you to create and manage hosts.
l Mapping View allows you to create and manage mapping views, and
allocate storage resources to hosts.
l Disk Domain allows you to create and manage disk pools.
l Storage Pool allows you to consolidate and centrally manage the storage
space provided by various disks.
l Port allows you to view port information and create and manage port
groups.
l Resource Performance Tuning allows you to view and manage
resource optimization features.
l Batch Configuration allows you to batch import configuration files to
the system and batch create storage resources.

l Snapshot allows you to manage the snapshots of storage devices.

l Remote Replication allows you to set up the a replication relationship
between local and remote storage devices to copy data on the primary
LUN to the secondary LUN. If data on a storage device is lost due to a
disaster, data on the other storage device is available, ensuring data
security and availability.
l Remote Device allows you to create remote links among storage
systems and transfer data.
l HyperMetro allows you to achieve real-time synchronization of
resource data and hitless data access upon failures.
NOTE
Some device models do not support this feature, for details about device models that
support this feature, see Product Description published in support website or consult
the product provider.

l Performance Monitoring allows you to monitor performance indicators

of devices in real time.
l Alarms and Events allows you to view alarms and logs.
l Power Consumption allows you to view the total power consumption
and power consumption on specific dates.
l SSD Service Life Monitoring allows you to view information about
SSDs to replace faulty disks in a timely manner and ensure normal
operation of devices.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 9

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Menu Function

l Initial Configuration allows you to configure basic device information,

device time, disk domain, alarm notification, and to manage license files.
l Export Data allows you to export running data, system logs and disk
logs.
l Restart Device allows you to restart storage devices.
l Power Off Device allows you to power off storage devices.
l Basic Information allows you to configure the storage device name,
location, time, and DNS service.
l Storage Settings allows you to manage the block storage service, file
storage service, and value-added service.
l Alarm Settings allows you to set alarm dump parameters, Trap IP
addresses for alarm notification, and alarm masking.
l Monitor Settings allows you to configure performance monitoring
parameters and performance monitoring file dump parameters.
l Permission Settings allows you to manage user accounts, configure
security policy, configure domains and configure authorized IP
addresses.
l License Management allows you to view license information, import
and activate license files, and back up license.
NOTE
Demo does not support the following functions: importing license files, powering off
devices, restarting devices, and automatically reporting alarms and events.

Support provides the links to the documentation center, training center, and
technical knowledge base.

2.6 Operations
This section describes how to close or uninstall Demo.
Table 2-2 describes the procedures for closing or uninstalling Demo.

Table 2-2 Operations

Operation Objective Procedure and Description

Stopping the To avoid In the desktop of the host, choose Start > All
Demo occupying Programs > DeviceManagerDemoforXXX > stop
service system resources demo.
when the Demo A window is displayed indicating the Demo service
service is not stops. The window is closed automatically, meaning
needed that the Demo service is stopped.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 10

DeviceManager Demo Usage Guide 2 Demo Usage Guide

Operation Objective Procedure and Description

Uninstalling To clear the 1. In the desktop of the host, choose Start > All
Demo Demo program Programs > DeviceManagerDemoforXXX > stop
and related files demo.
A window is displayed indicating the Demo service
stops. The window is closed automatically, meaning
that the Demo service is stopped.
2. Choose Start > All Programs >
DeviceManagerDemoforXXX > uninstall demo.
A window is displayed asking you to confirm the
uninstallation.
3. Click Yes to start uninstallation.
A dialog box is displayed indicating that the
uninstallation is completed.
4. Click OK to finish uninstalling Demo.

NOTE

XXX indicates the product model.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 11

DeviceManager Demo Usage Guide 3 FAQ

3 FAQ

This section describes how to handle problems that are commonly encountered during Demo
use.

3.1 What Can I Do When Demo Quits Unexpectedly During Startup?

3.2 Processes Occupied by the Demo
3.3 TCP Ports Occupied by the Demo
3.4 Solving the Problem of TCP Port Occupation by Other Processes
3.5 Disk Space Used by the Demo
3.6 How to initialize the Demo data?
3.7 How Can I Switch Over Storage Device Types?

3.1 What Can I Do When Demo Quits Unexpectedly

During Startup?
Question
What can I do when demo quits unexpectedly during startup?

Answer
This problem is caused by existence of multiple Java paths in the system environment
variables, that is, other Java environments were installed before Demo. Handle the problem in
the following procedure:
1. In the desktop of your maintenance terminal, choose Start > Control Panel.
2. Click System.
3. Select Advanced System Settings.
4. Click the Advanced tab.
5. Click Environment Variables.
6. Check the value of Path to see whether multiple Java paths exist.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 12

DeviceManager Demo Usage Guide 3 FAQ

– If yes, keep the last Java path and delete other Java paths.
– If no, contact technical support engineers.

3.2 Processes Occupied by the Demo

Question
Which processes are occupied by the Demo?

Answer
In Task Manager, the following processes occupied by the Demo exist by image path name
in ascending order:

3.3 TCP Ports Occupied by the Demo

Question
Which TCP ports are occupied by the Demo?

Answer
Perform the following steps to check which TCP ports are occupied by the Demo:

1. Choose Start > Run.

The Run dialog box is displayed.
2. Enter cmd and click OK.
The command line interface (CLI) is displayed.
3. Enter netstat -abno, and press Enter.
Port usage is displayed. You can see that TCP ports 8080, 8088, and 8989 are occupied.

3.4 Solving the Problem of TCP Port Occupation by Other

Processes
Question
How to solve the problem of TCP port occupation by other processes?

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 13

DeviceManager Demo Usage Guide 3 FAQ

Answer
由于运行Dorado SAN和Dorado NAS Demo需要使用“8079”、“8087”、“8988”、
“8080”、“8088”和“8989”六个TCP端口，启动和运行Demo时请确保这六个端口未被
其他进程占用。 If any of them is occupied, perform the following:
1. In the desktop of host, choose Start > All Programs > DeviceManagerDemoforXXX >
change port.

2. In Change Port dialog box, change the port value according to the actual circumstance.

NOTE

l Modifying httpd port will impact the Demo login. After modification, the port must be
replaced with the modified value when logging into the Demo.
l The value range of port is 1 to 65535. It is recommended to use the value after 1024.
3. Click OK to finish modifying the port.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 14

DeviceManager Demo Usage Guide 3 FAQ

3.5 Disk Space Used by the Demo

Question
How much disk space is used by the Demo?

Answer
The Demo uses about 512 MB of disk space. This number is for reference only. The actual
disk space the Demo uses is subject to the released version.

3.6 How to initialize the Demo data?

Question
After Demo being used, some initial data has been changed (for example, create a new share
or delete an existing directory). How to restore the Demo data to initialization?

Answer
l The solution is as below:
a. In the desktop of host, choose Start > All Programs >
DeviceManagerDemoforXXX > reInit start.
The Loading dialog box is displayed.
b. Wait until the dialog box disappears, re-log into Demo. The Demo data has been
restored to initialization.

3.7 How Can I Switch Over Storage Device Types?

Question
How can I switch over storage device types?

Answer
The demo supports multiple storage device types. Select the device type based on site
requirements.
1. In the desktop of a host, choose Start > All Programs > DeviceManagerDemoforXXX
> Change Device Model.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 15

DeviceManager Demo Usage Guide 3 FAQ

2. In the Change Device Model dialog box that is displayed, select the desired device type
and click Now Change.
The following figure uses TV500R007C00 as an example.

3. Click OK to complete the switchover.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 16

DeviceManager Demo Usage Guide A How to Get Help

A How to Get Help

If a tough or critical problem persists in routine maintenance or troubleshooting, contact

Huawei for technical support.
For any problem experienced with using Demo, feed back at http://support.huawei.com/
ecommunity/bbs/10225947.html.
Huawei provides users with timely and efficient technical support through the regional
offices, secondary technical support system, telephone technical support, remote technical
support, and onsite technical support.
Contents of the Huawei technical support system are as follows:
l Huawei headquarters technical support department
l Regional office technical support center
l Customer service center
l Technical support website: http://support.huawei.com/enterprise/
You can query how to contact the regional offices at http://support.huawei.com/enterprise/.

Issue 01 (2019-05-31) Copyright © Huawei Technologies Co., Ltd. 17