2020 PRODUCT CATALOG

WARNINGS
 CONTENTS

Section 01: Wire Rope Section 07: Stainless Steel

06 General Purpose Wire Rope 60 Aircraft Cable
07 Galvanized Aircraft Cable 61 Hardware
08 Crane Rope
10 High Performance Crane Rope
Section 08: Chain & Accessories
62 Grade 100
Section 02: Wire Rope End Fittings 64 GrabIQ Grade 100
14 Wedge Sockets 66 Grade 70
16 Forged Wire Rope Clips 68 Grade 30/43

Section 03: Wire Rope Slings Section 09: Rigging Tools

18 Single Leg Wire Rope Slings 70 Crosby IP Clamps
19 Two Leg Wire Rope Slings 71 J.C. Renfroe Clamps
20 Three Leg Wire Rope Slings 72 Lincoln Cable and Web Hoists
21 Four Leg Wire Rope Slings 73 Beam Clamps
22 Swage Socket Assemblies 73 Manual Trolleys
24 Roll Off Cable Assemblies 74 Harrington Lever Hoists
25 Pipe Carrier Lifting Slings 75 Harrington Hand Chain Hoists

Section 04: Chain Slings Section 10: Below The Hook

26 Single Leg Chain Slings 76 Standard Duty Lifting Beam
27 Double Leg Chain Slings 77 Adjustable Lifting Beam
28 Triple Leg Chain Slings 78 Standard Spreader Beam
29 Quadruple Leg Chain Slings 79 Adjustable Spreader Beam
30 GrabIQ Single Leg Chain Slings
31 GrabIQ Double Leg Chain Slings
32 GrabIQ Triple Leg Chain Slings Section 10: Cargo Control
33 GrabIQ Quadruple Leg Chain Slings 80 Ratchet Straps
81 Winch Straps
82 Winches & Winch Bars
Section 05: Synthetic Slings 83 Logistic Straps
34 Eye & Eye Web Slings 84 Utility Straps
35 Endless Web Slings
36 Reversed Eye Web Slings
36 Triangle Choker Web Slings Section 11: Synthetic Rope
37 Web Bridle Slings 86 Manila Rope
38 Round Slings 86 Double Braided Rope
39 High Performance Round Slings 87 Polypropylene Rope
87 Nylon Rope

Section 06: Rigging Hardware

40 Shackles Section 12: Services
46 Hooks 88 Sling Repair
52 Shur-Lok Hooks 88 On-Site Sling Inspections
54 Snatch Blocks 88 On-Site Rigging Training Course
55 Alloy Master Links 89 Proof Testing
56 Eye Bolts 89 Truck Delivery
59 Turnbuckles 89 Truck Winch Cable Repair
GENERAL PURPOSE WIRE ROPE

6X19 CLASS & 6X36 CLASS WIRE ROPE

6x19 classification ropes provide an outstanding balance between fatigue and wear resistance. They give excellent service with sheaves
and drums of moderate size. 6x36 classification ropes are more flexible but less abrasion resistant than the 6x19 classification. Each strand
contains multiple small diameter wires. As the number of wires increases, flexibility increases. Fiber core rope provides increased flexibility
over IWRC. While the strength is lower than IWRC, the flexibility may be preferred in certain applications.

Features Options
• Abrasion resistant • Stainless Steel
• Crush resistant • Galvanized
• Fatigue resistant • Left Lay
• No swivel
• Right lay
• Lubricated
• Multi layer spooling

6X19 CLASS IWRC 6X36 CLASS IWRC

Minimum Breaking Force

Diameter in Approximate Weight (tons of 2,000 lbs.)
Inches Per Foot in Pounds
IP XIP XXIP

1/4 0.116 2.94 3.40 -

5/16 0.18 4.58 5.27 -
3/8 0.26 6.56 7.55 8.30
7/16 0.35 8.89 10.2 11.2
1/2 0.46 11.5 13.3 14.6
9/16 0.59 14.5 16.8 18.5
5/8 0.72 17.9 20.6 22.7
3/4 1.04 25.6 29.4 32.4
7/8 1.42 34.6 39.8 43.8
1 1.85 44.9 51.7 56.9
1 1/8 2.34 56.5 65.0 71.5
1 1/4 2.89 69.4 79.9 87.9
1 3/8 3.50 83.5 96.0 106
1 1/2 4.16 98.9 114.0 125
1 5/8 4.88 115 132 146
1 3/4 5.67 133 153 169
1 7/8 6.50 152 174 192
2 7.39 172 198 217
2 1/8 8.35 192 221 243
2 1/4 9.36 215 247 272

6 | nelsonwirerope.com
 GALVANIZED AIRCRAFT CABLE

7X7 GALVANIZED AIRCRAFT CABLE

• Conforms to U.S. Federal Specification RR-W-410H
• Small diameter 7x7 cable is great for use on pulleys and general use when diameters are needed smaller than
available in 7x19 construction
• Zinc (galvanized) coated steel wire rope is the most common type of wire rope. It offers moderate corrosion
resistance, and remains ductile over long periods when running over sheaves. Galvanized cable is stronger than
stainless steel cable.
• Can be cut in custom lengths from 1 ft to 5,000 ft

Stock Number Rope Diameter (in.) Length on Reel (ft.) Approximate Weight Per Reel (lbs.) Nominal Breaking Strength (lbs.)
300-22 1/16 250 2 480
300-24 1/16 500 4 480
300-26 1/16 1000 8 480
300-32 3/32 250 4 920
300-34 3/32 500 8 920
300-36 3/32 1000 16 920
300-42 1/8 250 7 1,700
300-44 1/8 500 14 1,700
300-46 1/8 1000 28 1,700

7X19 GALVANIZED AIRCRAFT CABLE

• Conforms to U.S. Federal Specification RR-W-410H
• Commonly used on small diameter pulleys, running rigging on sailboats, perimeter barriers, winches and control
cables. 7x19 is the best all around cable for most applications.
• Zinc (galvanized) coated steel cable is the most common type of cable. It offers moderate corrosion resistance, and
remains ductile over long periods when running over sheaves. Galvanized cable is stronger than stainless steel
cable.
• Can be cut in custom lengths from 1 ft to 5,000 ft

Stock Number Rope Diameter (in.) Length on Reel (ft.) Approximate Weight Per Reel (lbs.) Nominal Breaking Strength (lbs.)
300-62 3/32 250 4 1,000
300-64 3/32 500 9 1,000
300-66 3/32 1000 17 1,000
300-72 1/8 250 7 2,000
300-74 1/8 500 15 2,000
300-76 1/8 1000 29 2,000
300-92 3/16 250 16 4,200
300-94 3/16 500 33 4,200
300-96 3/16 1000 65 4,200
300-112 1/4 250 28 7,000
300-114 1/4 500 55 7,000
300-116 1/4 1000 110 7,000
300-122 5/16 250 43 9,800
300-124 5/16 500 87 9,800
300-126 5/16 1000 173 9,800
300-131 3/8 250 61 14,400
300-132 3/8 500 122 14,400
300-133 3/8 1000 243 14,400

215.721.9333 | 7
CRANE ROPE
FLEX-X 19
Flex-X 19, a Category 2 rotation resistant rope, is made from 19 strands. Six
strands are laid around a core strand in one direction, and then 12 strands
are laid around this first operation in the opposite direction. Because of its
tightly compacted smooth design, Flex-X 19 offers more crushing resistance Wire Rope Diameter Approximate Weight Nominal Breaking
than standard 19 x 7 rope, higher strength- to-diameter, resistance to bending Per Foot in Pounds Strength in Tons
fatigue, exceptional stability, reduced wear to sheaves and drums, and in. mm
improved handling, operating and spooling characteristics.
7/16 11 0.43 11.2
Flex-X 19 has also demonstrated greater fatigue resistance to substantially
cut rope expense and extend service life. It’s ideal for multipart hoist lines 1/2 13 0.49 14.6
wherever you encounter spooling problems, drum crushing, block twisting or 9/16 14.5 0.65 18.5
have fast line speeds.
5/8 16 0.78 22.7
Features 3/4 19 1.16 32.4
• More crushing resistance than standard 19x7 7/8 22 1.58 43.8
• Higher strength-to-diameter resistance to
bending fatigue 1 26 2.05 56.9
• Exceptional stability 1 1/8 29 2.57 71.5
• No swivel 1 1/4 32 3.31 87.9
• Compacted
1-3/8 35 4.01 106.0
• Right lay
• Lubricated 1-1/2 38 4.77 125.0

• Multi layer spooling

8X19
Standard constructions are regular lay and either 19 Seale or 25 Filler Wire.
The size relationship between strands and cores gives these ropes increased Rope Diameter Approximate Weight Nominal Breaking
bendability over six strand ropes of the same diameter. The 8x19 has more in Inches Per Foot in Pounds Strength in Tons
crushing resistance and a higher minimum breaking force than 19x7, but less
rotation resistance. An 8x19 class rope can be used in multi-part reeving 7/16 .36 8.97
where limited rotation resistance is required.
1/2 .47 11.6
9/16 .60 14.7
Features
• Increased Bendability 5/8 .73 18.1

• Crush resistant 3/4 1.06 25.9

• Fatigue resistant 7/8 1.44 35.0
• No swivel
1 1.88 45.5
• Right lay
1 1/8 2.39 57.3
• Lubricated
• Multi layer spooling 1 1/4 2.94 70.5

19X7
Rope Diameter Approximate Weight Nominal Breaking
In an application where a single-part hoist rope is used to lift a free load – or
in Inches Per Foot in Pounds Strength in Tons
where rotation-resistant properties are essential for rope performance – the
19x7 can be used. Its rotation-resistant characteristic is achieved by laying six 1/4 .113 2.77
strands around a core strand in one direction, then laying 12 strands around
the first operation in the opposite direction. When the rope is in tension, 5/16 .177 4.3
opposing rotational forces are created between the inner and outer layers.
3/8 .25 6.15
7/16 .35 8.33

Features 1/2 .45 10.8

• No swivel 9/16 .58 13.6

• Right lay 5/8 .71 16.8
• Lubricated
3/4 1.02 24.0
• Multi layer spooling
7/8 1.39 32.5
1 1.82 42.2
1 1/8 2.30 53.1
1 1/4 2.83 65.1

8 | nelsonwirerope.com
 CRANE ROPE

FLEX-X 6
Flex-X 6 users receive superior performance and increased service life in many applications compared to the ropes they had previously em-
ployed. When compared to conventional six strand ropes, Flex-X 6 ropes provide greater surface area and more steel per given diameter. This
increases rope stability and strength. This results in a longer service life and less sheave and drum wear.

FLEX-X 9
Flex-X 9 features compacted strands and swaging for extra drum crushing resistance and increased stability. Its high density strands deliver
extra strength and resistance to abrasion. Flex-X 9 is manufactured with a dual compaction process to produce a compact cross-section with
minimum voids and greater surface area on outer wires that contact drums, sheaves and the rope during operation. The high-density compacted
strands minimize nicking at strand-to-strand contact points. Flex-X 9 was specifically designed for boom hoist applications where drum crushing
is a challenge.

Flex-X designs reduce drum scrubbing between the lead line and the
previous wrap. The smooth contact creates less interference, less
metal loss and wire deformation. The increased surface area of Flex-X
can be seen in the comparison of the contact points of a standard
6x26WS and Flex-X as shown.

FLEX-X 6 FLEX-X 9

FLEX-X 6 FLEX-X 9
Rope Diameter
in Inches Approximate Weight Nominal Breaking Approximate Weight Nominal Breaking
Per Foot in Pounds Strength in Tons Per Foot in Pounds Strength in Tons
3/8 .32 8.8 - -
7/16 .41 11.9 - -
1/2 .55 15.3 - -
9/16 .70 19.3 - -
5/8 .86 22.7 .95 26.2
3/4 1.25 32.4 1.35 37.4
7/8 1.67 43.8 1.85 50.6
1 2.18 56.9 2.40 65.7
1 1/8 2.71 71.5 3.05 82.7

215.721.9333 | 9
HIGH PERFORMANCE CRANE ROPE
Features
CASAR STARLIFT PLUS • Temperature range of use:–50°C to +75°C
A very flexible rope with a core in a special design avoiding crossovers • Suitable for multilayer spooling in Lang‘s lay
between the strands of core and preventing internal rope destruction. • Available in ordinary lay and Lang‘s lay
Hoist rope for mobile cranes, electrical hoists and other applications, • Available in right hand and left hand
where rotation resistant ropes are required. • Available in galvanized and ungalvanized

Wire Rope Diameter Approximate Weight 1960 N/mm² 2160 N/mm²

mm inches kg/m lbs/ft (kN) t [2000 lbs.] (kN) t [2000 lbs.]
10 - 0,50 0.34 92,0 10.34 98,0 11.02
11 7/16 0,61 0.41 111,0 12.48 119,0 13.38
12 - 0,73 0.49 132,0 14.84 144,0 16.19
- 1/2 0,81 0.55 147,8 16.61 161,3 18.13
13 0,85 0.57 155,0 17.42 169,0 19.00
14 - 0,99 0.67 179,0 20.12 195,0 21.92
• Compacted 15 - 1,13 0.76 206,0 23.16 225,0 25.29
• Swivel
16 5/8 1,29 0.87 235,0 26.42 257,0 28.89
• Lubricated
17 - 1,46 0.98 261,0 29.34 285,0 32.04
18 - 1,63 1.09 298,0 33.50 325,0 36.53
19 3/4 1,81 1.22 329,0 36.98 359,0 40.53
20 - 2,02 1.36 367,0 41.25 401,0 45.07
21 - 2,23 1.50 402,0 45.19 439,0 49.35
22 - 2,44 1.64 442,0 49.68 483,0 54.29
- 7/8 2,48 1.67 451,1 50.71 492,9 55.40
23 - 2,68 1.80 483,0 54.29 527,0 59.24
24 - 2,90 1.95 525,0 59.01 573,0 64.41
25 - 3,14 2.11 571,0 64.18 623,0 70.03
- 1 3,25 2.18 589,4 66.25 643,1 72.29
26 - 3,42 2.30 615,0 69.13 671,0 75.42
27 - 3,68 2.47 669,0 75.20 730,0 82.06
28 - 3,95 2.65 719,0 80.82 784,0 88.13
- 1 1/8 4,11 2.76 748,8 84.17 816,5 91.78
29 - 4,26 2.86 768,0 86.33 838,0 94.19
30 - 4,55 3.05 827,0 92.96 903,0 101.50
31 - 4,85 3.26 879,0 98.80 959,0 107.80
32 1 1/4 5,17 3.47 934,0 104.99 1.019,0 114.54
33 - 5,49 3.69 1.003,0 112.74 1.095,0 123.08
34 - 5,83 3.92 1.054,0 118.47 1.150,0 129.27
35 1 3/8 6,19 4.16 1.116,5 125.50 1.218,2 136.93
36 - 6,54 4.40 1.187,0 133.42 1.296,0 145.68
38 1 1/2 7,31 4.91 1.322,0 148.60 1.443,0 162.20
40 - 8,06 5.41 1.467,0 164.90 1.601,0 179.96
- 1 5/8 8,58 5.77 1.562,0 175.58 1.704,7 191.61
42 - 8,87 5.96 1,616,0 181.65 1.764,0 198.28
44 - 9,77 6.56 1.770,0 198.96 1.932,0 217.17
- 1 3/4 9,97 6.70 1.806,4 203.05 1.971,7 221.63
46 - 10,68 7.18 1.935,0 217.50 2.112,0 237.40
48 1 7/8 11,58 7.78 2.115,0 237.74 2.309,0 259.54
50 - 12,61 8.48 2.297,0 258.19 2.507,0 281.80
- 2 12,99 8.73 2.371,0 266.51 2.587,9 290.89
52 - 13,61 9.14 2.486,0 279.44 2.713,0 304.95
54 2 1/8 14,70 9.88 2.695,0 302.93 2.941,0 330.58
56 - 15,81 10.62 2.879,0 323.61 3.142,0 353.17

10 | nelsonwirerope.com
 HIGH PERFORMANCE CRANE ROPE
CASAR STARLIFT XTRA
The latest high performance rotation-resistant rope designed and manufactured by CASAR
Germany, a member of WireCo WorldGroup.

CASAR® Starlift XtraTM, the new high performance rotation resistant rope, was
added to the CASAR product range to meet the highest Minimum Breaking Forces
requested in the crane rope market. CASAR Starlift Xtra provides the user unique
characteristics as a hoist rope.

Features
• Temperature range of use:–50°C to +75°C
• Suitable for multilayer spooling in Lang‘s lay
• Available in ordinary lay and Lang‘s lay
• Available in right hand and left hand
• Available in galvanized and ungalvanized

Rotation Resistance (Non-Rotating)

The balanced design of CASAR Starlift Xtra results in minimal torque under load, providing superior rotation resistance. Under a normal working load
range, CASAR Starlift Xtra has virtually no tendency to rotate, making it ideal for both single-part and multi-part hoist systems and also for those involving
long falls where rotation resistance is required.

CASAR Starlift Xtra meets both the Category 1 requirements according to ASTM A1023 and the general guidance on the use of a swivel given in Annex A
ISO 21669. Due to its superior rotation resistant properties, CASAR Starlift Xtra may be used with a swivel.

Resistance to Wear
The multi-strand design of CASAR Starlift Xtra combined with compacted strands and lang lay construction helps to maximize resistance to wear by greatly
increasing wire and strand surface areas that contact sheaves and drums. Internally, the enhanced surfaces of the compacted strands help minimize
strand-to-strand nicking between strand layers. This feature results in greater resistance to fatigue.

Resistance to Crushing and Abrasion on Drums

The characteristics of CASAR Starlift Xtra enhance its performance in multiple-layer spooling as well. The design of CASAR Starlift Xtra provides excellent
resistance to both abrasion and scrubbing that occurs at kickover areas and crushing that occurs at the crossover points in multiple-layer drum spooling.
The rope construction combined with the compacted strand design of CASAR Starlift Xtra results in a rope cross-section of very high density. These
features provide increased resistance to drum-related wear.

Wire Rope Diameter Approximate Weight Minimum Breaking force

mm in kg/m lbs/ft (kN) t [2000 lbs.]
14 - 0,99 0.67 208,0 23.38
15 - 1,13 0.76 235,0 26.42
16 5/8 1,34 0.90 272,0 30.57
17 - 1,46 0.98 302,0 33.95
18 - 1,63 1.09 340,0 38.22
19 3/4 1,87 1.26 382,0 42.94
20 - 2,02 1.36 421,0 47.32
21 - 2,23 1.50 460,0 51.71
22 - 2,44 1.64 509,0 57.21
- 7/8 2,48 1.67 519,5 58.39
- 1 3,25 2.18 675,0 75.87
26 - 3,42 2.30 705,0 79.25
27 - 3,68 2.47 757,0 85.09
28 - 4,04 2.71 815,0 91.61
- 1 1/8 4,21 2.83 848,8 95.41
30 - 4,78 3.21 934,0 104.99
32 - 5,29 3.55 1.085,0 121.96

215.721.9333 | 11
 HIGH PERFORMANCE CRANE ROPE

OLIVEIRA NR MAXIPACT
All cranes and performant lifting devices where non-rotating and high MBL ropes are required.
Recommended for offshore, deck cranes and marine environment.

• Temperature range of use: -50°C to +100°C

• Temperature range of use for option PPI: -50°C to +80°C
• Option PPI – only available for diameter ≥ 13mm
• Please add 1.0% on the weight for ropes with PPI
• Available in ordinary lay and Lang‘s lay
• Available in right hand and left hand

Diameter Approximate Weight 1960 N/mm² 2160 N/mm²

mm inches kg/m lbs/ft. kN t [2000 lbs.] kN t [2000 lbs.]
Oliveira NR Maxipact PPI
12.70 1/2 0,77 0.52 148,0 16.64 155,9 17.52
13 - 0,82 0.55 157,8 17.73 165,7 18.62
14 - 0,95 0.64 183,3 20.60 192,5 21.63
15 - 1,09 0.73 209,6 23.56 220,6 24.80
15.88 5/8 1,20 0.81 230,0 25.85 241,0 27.09
16 - 1,25 0.84 239,4 26.91 251,4 28.26
17 - 1,40 0.94 269,7 30.32 283,4 31.86
18 - 1,57 1.06 302,5 34.01 317,7 35.71
19 3/4 1,76 1.18 338,9 38.09 255,9 40.00
20 - 1,94 1.30 374,2 42.06 393,0 44.17
Oliveira NR Maxipact
21 - 2,13 1.43 412,2 46.33 432,9 48.65
22 - 2,34 1.57 452,0 50.81 474,7 53.35
22.23 7/8 2,37 1.59 458,0 51.48 481,0 54.07
23 - 2,56 1.72 494,8 55.62 519,6 58.41
24 - 2,79 1.87 540,3 60.73 567,4 63.78
25 - 3,04 2.04 587,1 65.99 616,6 69.30
25.40 1 3,08 2.07 595,4 66.93 625,3 70.29
26 - 3,27 2.20 634,2 71.29 666,1 74.87
27 - 3,54 2.38 683,6 76.84 717,9 80.69
28 - 3,80 2.55 734,0 82.51 770,9 86.65
28.58 1 1/8 3,98 2.67 768,3 86.36 806,8 90.69
29 - 4,07 2.73 790,0 88.80 824,4 92.67
30 - 4,39 2.95 846,3 95.13 888,8 99.90
31.75 1 1/4 4,84 3.25 930,0 104.54 975,0 109.59
32 - 4,98 3.34 959,6 107.87 1.007,8 113.28
34 - 5,59 3.75 1.079,3 121.32 1.133,0 127.35
34.93 1 3/8 5,94 3.99 1.146,8 128.91 1.202,0 135.11
36 - 6,31 4.24 1.221,5 137.30 1.282,8 144.19
38 1 1/2 7,01 4.71 1.352,4 152.01 1.418,4 159.43
40 - 7,74 5.20 1.495,0 168.05 1.569,0 176.36
41.28 1 5/8 8,30 5.58 1.602,1 180.08 1.682,5 189.12
42 - 8,52 5.72 1.645,2 184.92 1.730.0 194.46
44 - 9,37 6.30 1.818,6 204,42 1.909.9 214.46
44.45 1 3/4 9,51 6.39 1.838,6 206,67 1.928.2 216.74
46 - 10,33 6.94 1.995,7 224,33 2,095.8 235.58
47.63 1 7/8 10,86 7.29 2.095,0 235,49 2,190.0 246.17
48 - 11,32 7.61 2.184,3 245,52 2,293.9 257.84
50 - 12,03 8.09 2.331,7 262,10 2,451.2 275.52
50.80 2 12,42 8.34 2.400,1 269,78 2,517.2 282.93

12 | nelsonwirerope.com
 HIGH PERFORMANCE CRANE ROPE
ENDURANCE DYFORM
Resistance to rotation
Greatest resistance to rotation of all ropes in the rotation-resistant
product range Benefits:
— confirmed by Bridon’s unique Twistcheck testing program. • Plastic impregnated
Resistance to bending fatigue • Extends fatigue life
Longer bend-fatigue life when compared with conventional • Improves structural stability - Resists corrosion
rotation-resistant ropes • Low rotation
— confirmed by laboratory testing and extensive field experience.
• Recommended for high lifting operations
Resistance to crushing • High strength
Excellent resistance to crushing and abrasion due to the rope’s
compact design and the Dyform strands • Reduced rope sheave wear
— recommended when multi-layer spooling is involved. • Accurate diameter, recommended for multi-layer
spooling
Reduced elongation • Suitable for single part and multi-part reeving
Increased steel content and the Dyform process minimize
elongation. • Long service life
• Resistance to bending fatigue
Long service life • Reduced elongation
Exceptional performance means less down time and more work time.

Diameter Approximate Weight Minimum Breaking Force (tons)

inches mm lbs/ft. 34 LR 1960 34 LR 2160 34XL 34MAX
1/2 - 0.54 16.5 18.0 - -
- 13 0.57 17.3 18.7 - -
- 14 0.65 20.1 21.5 - -
9/16 - 0.68 20.8 22.7 - -
5/8 16 0.84 26.1 28.2 30.6 -
- 18 1.07 33.5 35.9 - -
3/4 19 1.21 37.0 40.0 42.9 -
- 20 1.32 41.6 44.6 - -
- 21 1.51 45.0 48.6 - -
- 22 1.61 49.7 54.2 - -
7/8 - 1.65 50.4 54.8 - -
- 23 1.75 54.0 56.9 - -
- 24 1.92 59.3 64.0 - -
1 - 2.15 62.4 70.0 71.7 76.9
- 26 2.28 69.5 74.0 74.0 79.3
- 28 2.63 76.0 82.6 84.4 91.6
1 1/8 - 2.73 79.5 83.6 86.9 92.7
29 2.94 - - 93.2 -
- 30 3.07 92.5 94.0 - 105.0
1 1/4 32 3.37 98.2 110.2 110.2 122.0

215.721.9333 | 13
WIRE ROPE END FITTINGS

S-421T WEDGE SOCKETS

(Assembly includes Socket, Wedge, Pin and Wire Rope Clip)
• Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and
temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue
life, impact properties and material traceability, not addressed by ASME B30.26.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on
Cranes available. Certificates available when requested at time of order and may include additional charges.
• Basket is cast steel and individually magnetic particle inspected.
• Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter
sockets.
• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge.
• Eliminates the need for an extra piece of rope, and is easily installed.
• The TERMINATORTM wedge eliminates the potential breaking off of the tail due to fatigue.
S-421T • The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse.
Wedge sockets meet the performance
• Incorporates Crosby’s patented QUIC-CHECK® “Go” and “No-Go” feature cast into the wedge. The proper size rope is
requirements of Federal Specification
RR-S-550E, Type C, except those provisions
determined when the following criteria are met:
required of the contractor. • 1) The wire rope should pass thru the “Go” hole in the wedge.
• 2) The wire rope should NOT pass thru the “No-Go” hole in the wedge.
• Utilizes standard Crosby Red-U-Bolt® wire rope clip.
• The 3/8 through 1-1/8 standard S-421 wedge socket can be retrofitted with the new style TERMINATOR wedge.
• Available with Bolt, Nut, and Cotter Pin.
• U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
• Meets the performance requirements of EN 13411-6: 2003.

Wire Rope Dia.

S-421T Weight Weight API 2C Standard Bolt, Weight
Wedge
Stock Each Each Bolt, Nut & Nut & Each
(in.) (mm) Only
No. (lbs.) (Ibs.) Cotter Assy Cotter Assy (lbs.)

3/8 9-10 1035000 3.18 1035555 .50 1092230 2038971 .38

1/2 11-13 1035009 6.15 1035564 1.05 1092248 2038974 .69
5/8 14-16 1035018 9.70 1035573 1.79 1092257 2038976 1.15
3/4 18-19 1035027 14.50 1035582 2.60 1092293 2038978 1.91
7/8 20-22 1035036 21.50 1035591 4.00 1092319 2038980 3.23
1 24-26 1035045 30.75 1035600 5.37 1092337 2038982 5.40
1-1/8 28 1035054 45.30 1035609 7.30 1092364 2038984 7.50
1-1/4 30-32 1035063 64.90 1035618 10.60 1092375 2038971 10.34

Wire Rope Dia. Dimensions (in.)

C
(in.) (mm) S-421T +/-
Stock No. A B .09 D G H J* K* L P R S T U V
3/8 9-10 1035000 5.69 2.72 .81 .81 1.38 3.06 7.80 1.88 .88 1.56 .44 2.13 .44 1.25 1.38
1/2 11-13 1035009 6.88 3.47 1.00 1.00 1.62 3.76 8.91 1.26 1.06 1.94 .50 2.56 .53 1.75 1.88
5/8 14-16 1035018 8.25 4.30 1.25 1.19 2.12 4.47 10.75 1.99 1.22 2.25 .56 3.25 .69 2.00 2.19
3/4 18-19 1035027 9.88 5.12 1.50 1.38 2.44 5.28 12.36 2.41 1.40 2.63 .66 3.63 .78 2.34 2.56
7/8 20-22 1035036 11.25 5.85 1.75 1.63 2.69 6.16 14.37 2.48 1.67 3.13 .75 4.31 .88 2.69 2.94
1 24-26 1035045 12.81 6.32 2.00 2.00 2.94 6.96 16.29 3.04 2.00 3.75 .88 4.70 1.03 2.88 3.28
1-1/8 28 1035054 14.38 6.92 2.25 2.25 3.31 7.62 18.34 2.56 2.25 4.25 1.00 5.44 1.10 3.25 3.56
1-1/4 30-32 1035063 16.34 8.73 2.62 2.50 3.56 9.39 20.48 2.94 2.34 4.50 1.06 6.13 1.19 4.62 4.94

* Nominal NOTE: For intermediate wire rope sizes, use next larger size socket. The S-423T Super TERMINATOR wedge is designed to be assembled only into the
Crosby S-421T TERMINATOR socket body. IMPORTANT: The S-423TW for sizes 5/8” through 1-1/8” (14mm through 28mm) will fit respective size standard Crosby S-421T
basket. The 1-1/4” (30-32mm) S-423TW will only fit the Crosby S-421T 1-1/4” basket marked with TERMINATOR.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

14 | nelsonwirerope.com
 WIRE ROPE END FITTINGS

S-423T WEDGE SOCKETS

(Assembly includes Socket, Wedge, Pin, Wire Rope Clip, Tensioner, Bolts and Secondary
Retention Wire)

• The 423T wedge socket terminations have a minimum efficiency rating on most high performance, high strength,
compacted strand, rotation resistant wire ropes of 80% based on the catalog breaking strength of the various
ropes.**
• Design eliminates the difficulty of properly seating the wedge with high performance wire rope into a wedge
socket termination.
• Proper application of the Super TERMINATOR eliminates the “first load” requirement of conventional wedge socket
terminations.
• S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T TERMINATOR wedge sockets.
• Wedge and accessories provided with a zinc finish.
• Meets the performance requirements of EN13411-6:2003.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and
S-423T
temperature requirements. Importantly, these sockets meet other critical performance requirements including
fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• US Patent 8,375,527 B1.
• Basket is cast steel and individually magnetic particle inspected.
• Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter
sockets.
• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “punch out” of the wedge.
• Eliminates the need for an extra piece of rope, and is easily installed.
• The TERMINATOR® wedge eliminates the potential breaking off of the tail due to fatigue.
• The tail, which is secured by the base of the clip and the tension device, is left undeformed and available for reuse.
• Available with Bolt, Nut, and Cotter Pin.

S-423T S-423TB
Wire Rope S-423TW**
Assembly with Round Pin Assembly with Bolt, Nut
Dia. Wedge Kit
and Cotter Pin and Cotter Pin
API 2C S-423T API 2C S-423TB S423TW
S-423T S-423TB S-423TW
(in.) (mm) S-423T Weight Each S-423TB Weight Each Weight Each
Stock No. Stock No. Stock No.
Stock No. (lbs.) Stock No. (lbs.) (lbs.)
5/8 14- 16 1035123 1035128 12.7 1035218 1035223 13.1 1034018 5.2
3/4 18-19 1035132 1035137 19.4 1035227 1035232 19.1 1034027 7.2
7/8 20-22 1035141 1035146 28.8 1035236 1035241 27.8 1034036 10.3
1 24-26 1035150 1035155 39.2 1035245 1035250 37.3 1034045 11.9
1-1/8 28 1035169 1035174 57.1 1035254 1035259 57.9 1034054 19.9
1-1/4 30-32 1035178 1035183 88.6 1035272 1035277 88.1 1034063 33.8

**Kit contains Wedge, Wire Rope Clip and Bolts, Tensioner Bolt and Secondary Retention Wire.

Wire Rope S-423T Dimensions

Dia. Stock (in.)
(in.) (mm) No. A B C D E F G H J* L P R S T U V
5/8 14-16 1035123 8.25 4.50 1.25 1.19 3.00 4.06 2.13 4.61 12.31 1.22 2.25 .56 3.25 .75 6.88 2.60
3/4 18-19 1035132 9.88 5.20 1.50 1.38 3.25 4.81 2.44 5.37 14.69 1.40 2.62 .66 3.63 .88 7.65 3.02
7/8 20-22 1035141 11.25 5.88 1.75 1.63 3.81 5.73 2.69 6.16 16.98 1.67 3.13 .75 4.31 1.00 9.47 3.47
1 24-26 1035150 12.81 6.56 2.00 2.00 3.81 5.73 2.94 7.05 18.54 2.01 3.75 .88 4.70 1.13 10.41 3.82
1-1/8 28 1035169 14.38 6.94 2.25 2.25 4.00 6.85 3.38 7.81 21.23 2.26 4.25 1.00 5.44 1.25 11.83 4.22
1-1/4 30-32 1035178 16.34 8.63 2.62 2.50 4.50 7.76 3.57 9.38 24.10 2.34 4.50 1.06 6.62 1.38 13.87 5.82

* Nominal NOTE: For intermediate wire rope sizes, use next larger size socket. The S-423T Super TERMINATOR wedge is designed to be assembled only into the Crosby S-421T
TERMINATOR socket body. IMPORTANT: The S-423TW for sizes 5/8" through 1-1/8" will fit respective size standard Crosby S-421T basket. The 1-1/4" S-423TW will only fit the Crosby
S-421T 1-1/4" basket marked with TERMINATOR.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 15
WIRE ROPE END FITTINGS

G-450 FORGED CLIPS

• Each base has a Product Identification Code (PIC) for material traceability, the name
CROSBY or CG, and a size forged into it.
• Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an
efficiency rating of 80% for 1/8” - 7/8” sizes, and 90% for sizes 1” through 3-1/2”.
• Entire Clip is Galvanized to resist corrosive and rusting action.
• Sizes 1/8” through 2-1/2” and 3” have forged bases.
• All Clips are individually bagged or tagged with proper application instructions and
warning information.
• Clip sizes up through 1-1/2” have rolled threads.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility,
design factor, proof load and temperature requirements. Importantly, these wire
rope clips meet other critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26.
• Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.

Std. Weight Dimensions

Rope Size G-450
Package Per 100 (in.)
Stock No.
(in.) (mm) Qty. (lbs.) A B C D E F G H
1/8 3-4 1010015 100 6 .22 .72 .44 .47 .37 .38 .81 .99
3/16 5 1010033 100 10 .25 .97 .56 .59 .50 .44 .94 1.18
1/4 6-7 1010051 100 19 .31 1.03 .50 .75 .66 .56 1.19 1.43
5/16 8 1010079 100 28 .38 1.38 .75 .88 .73 .69 1.31 1.66
3/8 9-10 1010097 100 48 .44 1.50 .75 1.00 .91 .75 1.63 1.94
7/16 11 1010113 50 78 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
1/2 12-13 1010131 50 80 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
9/16 14-15 1010159 50 109 .56 2.25 1.25 1.31 1.34 .94 2.06 2.50
5/8 16 1010177 50 110 .56 2.25 1.25 1.31 1.34 .94 2.06 2.50
3/4 18-20 1010195 25 142 .62 2.75 1.44 1.50 1.39 1.06 2.25 2.84
7/8 22 1010211 25 212 .75 3.12 1.62 1.75 1.58 1.25 2.44 3.16
1 24-26 1010239 10 252 .75 3.50 1.81 1.88 1.77 1.25 2.63 3.47
1-1/8 28-30 1010257 10 283 .75 3.88 2.00 2.00 1.91 1.25 2.81 3.59
1-1/4 32-34 1010275 10 438 .88 4.44 2.22 2.34 2.17 1.44 3.13 4.13
1-3/8 36 1010293 10 442 .88 4.44 2.22 2.34 2.31 1.44 3.13 4.19
1-1/2 38 1010319 10 544 .88 4.94 2.38 2.59 2.44 1.44 3.41 4.44
1-5/8 41-42 1010337 Bulk 704 1.00 5.31 2.62 2.75 2.66 1.63 3.63 4.75
1-3/4 44-46 1010355 Bulk 934 1.13 5.75 2.75 3.06 2.92 1.81 3.81 5.24
2 48-52 1010373 Bulk 1300 1.25 6.44 3.00 3.38 3.03 2.00 4.44 5.88
2-1/4 56-58 1010391 Bulk 1600 1.25 7.13 3.19 3.88 3.19 2.00 4.56 6.38
2-1/2 62-65 1010417 Bulk 1900 1.25 7.69 3.44 4.13 3.69 2.00 4.69 6.63
2-3/4 68-72 1010435 Bulk 2300 1.25 8.31 3.56 4.38 4.88 2.00 5.00 6.88
3 75-78 1010453 Bulk 3100 1.50 9.19 3.88 4.75 4.44 2.38 5.31 7.61
3-1/2 85-90 1010426 Bulk 4000 1.50 10.75 4.50 5.50 6.00 2.38 6.19 8.38

Copyright © 2016 The Crosby Group LLC All Rights Reserved

16 | nelsonwirerope.com
 WIRE ROPE END FITTINGS

CROSBY® FORGED WIRE ROPE CLIP 5. WIRE ROPE SPLICING PROCEDURES:

WARNINGS & APPLICATION INSTRUCTIONS The preferred method of splicing two wire ropes together is to use inter-locking
turnback eyes
with thimbles, using the
Efficiency ratings for wire rope end terminations are based upon the
recommended number
minimum breaking force of wire rope. The efficiency rating of a properly
of clips on each eye
prepared loop or thimble-eye termination for clip sizes 1/8” through 7/8”
is 80%, and for sizes 1” through 3-1/2” is 90%. (See Figure 5). Figure 5

The number of clips shown (see Table 1) is based upon using RRL or
An alternate method is to use twice the number of clips as used for a turnback
RLL wire rope, 6 x 19 or 6 x 37 Class, FC or IWRC; IPS or XIP, XXIP. If
termination. The rope ends are placed parallel
Seale construction or similar large outer wire type construction in the 6 to each other,
x 19 Class is to be used for sizes 1 inch and larger, add one additional overlapping by twice
clip. If a pulley (sheave) is used for turning back the wire rope, add one the turnback amount
additional clip. shown in the application
The number of clips shown also applies to rotation-resistant RRL wire instructions. The minimum
rope, 8 x 19 Class, IPS, XIP, XXIP sizes 1-1/2 inch and smaller; and to number of clips should be
rotation-resistant RRL wire rope, 19 x 7 Class, IPS, XIP, XXIP sizes 1-1/2 installed on each dead end
inch and smaller. (See Figure 6). Spacing, installation Figure 6
For other classes of wire rope not mentioned above, we recommend torque, and other instructions still apply.
contacting Crosby Engineering at the address or telephone number on
the back cover to ensure the desired efficiency rating. 6. IMPORTANT
The style of wire rope termination used for any application is the Apply first load to test the assembly. This load should be of equal or greater
obligation of the user. weight than loads expected in use. Next, check and use torque wrench to
retighten nuts to recommended torque.
For OSHA (Construction) applications, see OSHA 1926.251.
In accordance with good rigging and maintenance practices, the wire rope
1. Refer to Table 1 end termination should be inspected periodically for wear, abuse, and general
following these instructions. adequacy.
Turn back specified amount Figure 1
of rope from thimble or loop. Apply first clip one base width from dead
end of rope. Apply U-Bolt over dead end of wire rope – live end rests Clip Size/Rope Size Minimum Amount of Rope to * Torque
in saddle (Never saddle a dead horse!). Use torque wrench to tighten No. of Clips Turn Back in inches in Ft. Lbs.
(in.) (in.)
nuts evenly, alternate from one nut to the other until reaching the
recommended torque. (See Figure 1) 1/8 1/8 2 3-1/4 4.5
2. When two clips are 3/16 3/16 2 3-3/4 7.5
required, apply the second Figure 2 1/4 1/4 2 4-3/4 15
clip as near the loop or 5/16 5/16 2 5-1/4 30
thimble as possible. Use torque wrench to tighten nuts evenly,
3/8 3/8 2 6-1/2 45
alternating until reaching the recommended torque. When more than
two clips are required, apply the second clip as near the loop or thimble 7/16 7/16 2 7 65
as possible, turn nuts on second clip firmly, but do not tighten. (See 1/2 1/2 3 11-1/2 65
Figure 2) 9/16 9/16 3 12 95
3. When three or more clips are required, space additional clips equally 5/8 5/8 3 12 95
between first two
– take up rope slack – use 3/4 3/4 4 18 130
torque wrench to tighten Figure 3 7/8 7/8 4 19 225
nuts on each clip evenly, alternating from one nut to the other until 1 1 5 26 225
reaching recommended torque. (See Figure 3)
1-1/8 1-1/8 6 34 225
4. If a pulley (sheave) is 1-1/4 1-1/4 7 44 360
used in place of a thimble, 1-3/8 1-3/8 7 44 360
add one additional
1-1/2 1-1/2 8 54 360
Fist Grip. Fist Grip
spacing should be 1-5/8 1-5/8 8 58 430
as shown. 1-3/4 1-3/4 8 61 590
(See Figure 4) 2 2 8 71 750
Figure 4
2-1/4 2-1/4 8 73 750
2-1/2 2-1/2 9 84 750
2-3/4 2-3/4 10 100 750
3 3 10 106 1200
3-1/2 3-1/2 12 149 1200
If a pulley (sheave) is used for turning back the wire rope, add one
additional clip. See Figure 4.
If a greater number of clips are used than shown in the table, the amount
of turnback should be increased proportionately.
*The tightening torque values shown are based upon the threads being
clean, dry, and free of lubrication.
Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 17
WIRE ROPE SLINGS

SINGLE LEG WIRE ROPE SLINGS

Features Wire Rope Sling Types
• Flemished eye splice • 11-1-1 - Single leg wire rope sling with standard eyes on both ends
• Sizes available from 1/4” to 2” • 11-1-1C - Single leg wire rope sling with standard eyes on both ends and sliding choker hook
• 6x19 & 6x37 class bright EIPS IWRC wire rope • 11-1-2 - Single leg wire rope sling with standard eye on one end, thimble eye on other end
• Galvanized & stainless steel wire rope available upon request • 11-2-2 - Single leg wire rope sling with thimble eyes on both ends
• Heavy duty steel tag • 11-1-3 - Single leg wire rope sling with standard eye on one end, thimble eye with alloy eye hook on
• 5 to 1 design factor other end
• Proof testing available upon request • 11-2-3 - Single leg wire rope sling with thimble eye on one end, thimble eye with alloy eye hook on
other end
• Made in Hatfield, PA.
• 11-3-0 - Length of wire rope with thimble eye and alloy eye hook on one end
• 11-1-SB - Single leg wire rope sling with standard eye on one end, swaged button on other end
How To Order
• 11-9-3 - Single leg wire rope sling with thimble eye and oblong master link on one end, thimble eye
• Specify wire rope size and alloy eye hook on other end
• Specify leg length
• Specify end type

11-1-1 11-1-1C 11-1-2 11-2-2 11-1-3 11-2-3 11-3-0 11-1-SB 11-9-3

Single Leg Wire Rope Slings

Eye Size IWRC EIPS 6x19 & 6x37 Class Cable Laid 7x7x7 & 7x7x19 Class Hidden Tuck Hand Splice
Wire Rope (in.) Minimum
Diameter Sling Vertical Choker Basket Vertical Choker Basket Vertical Choker Basket
(in.) Eye Eye Length Capacity Capacity Capacity Capacity Capacity Capacity Capacity Capacity Capacity
Width Length (Tons) (Tons) (Tons) (Tons) (Tons) (Tons) (Tons) (Tons) (Tons)

1/4 3 6 1’ 6” .65 .48 1.3 - - - - - -

3/8 3 6 2’ 1.4 1.1 2.9 1.1 .74 2.2 1.2 .94 2.4
1/2 4 8 2’ 6” 2.5 1.9 5.1 1.9 1.3 3.7 2.0 1.6 4.0
5/8 5 10 3’ 3.9 2.9 7.8 2.8 1.9 5.5 3.1 2.6 6.2
3/4 6 12 3’ 6” 5.6 4.1 11 4.1 2.8 8.1 4.3 3.7 8.6
7/8 7 14 4’ 7.6 5.6 15 5.4 3.7 11 - - -
1 8 16 4’ 6” 9.8 7.2 20 6.9 4.7 14 - - -
1 1/8 9 18 5’ 12 9.1 24 - - - - - -
1 1/4 10 20 5’ 6” 15 11 30 - - - - - -
1 3/8 11 22 6’ 18 13 36 - - - - - -
1 1/2 12 24 7’ 21 16 42 - - - - - -
1 3/4 14 28 8’ 28 21 57 - - - - - -
2 16 32 9’ 37 28 73 - - - - - -

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

18 | nelsonwirerope.com
 WIRE ROPE SLINGS

TWO LEG WIRE ROPE BRIDLE SLINGS

Features
• Flemished eye splice
• Sizes available from 1/4” to 2”
• 6x19 & 6x37 class bright EIPS IWRC wire rope
• Galvanized & stainless steel wire rope available upon request
• Heavy duty steel tag Length
• 5 to 1 design factor
• Proof testing available upon request
• Made in Hatfield, PA.

How To Order
• Specify wire rope size
• Specify leg length
• Specify end fittings

Standard Two Leg Bridle Sling Types

• 12-9-3 - Two leg wire rope bridle sling with an oblong master link at the top, alloy eye hooks at the bottom
• 12-9-2 - Two leg wire rope bridle sling with an oblong master link at the top, thimble eyes at the bottom

12-9-3 12-9-2

Two Leg Wire Rope Bridle Slings

Wire Rope Diameter Rated Capacity (Tons) (2000 lbs.) Standard Hardware Included
(in.)
60 Degrees 45 Degrees 30 Degrees Alloy Master link (in.) Eye Hooks
1/4 1.1 .91 .65 1/2 0.75 ton S-320C
3/8 2.5 2.0 1.4 1/2 1.5 ton S-320C
1/2 4.4 3.6 2.5 3/4 3 ton S-320C
5/8 6.8 5.5 3.9 1 5 ton S-320A
3/4 9.7 7.9 5.6 1-1/4 7 ton S-320A
7/8 13.0 11.0 7.6 1-3/8 11 ton S-320A
1 17.0 14.0 9.8 1-1/2 11 ton S-320A
1 1/8 21.0 17.0 12.0 1-1/2 15 ton S-320A
1 1/4 26.0 21.0 15.0 1-1/2 15 ton S-320A
1 3/8 31.0 25.0 18.0 1-3/4 22 ton S-320A
1 1/2 37.0 30.0 21.0 1-3/4 22 ton S-320A
1-3/4 49.0 40.0 28.0 2-1/2 30 ton S-320A
2 63.0 52.0 37.0 2-3/4 37 ton S-320A

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 19
WIRE ROPE BRIDLE SLINGS

THREE LEG WIRE ROPE BRIDLE SLINGS

Features
• Flemished eye splice
• Sizes available from 1/4” to 2”
• 6x19 & 6x37 class bright EIPS IWRC wire rope
• Galvanized & stainless steel wire rope available upon request
• Heavy duty steel tag
• 5 to 1 design factor
• Proof testing available upon request Length
• Made in Hatfield, PA.

How To Order
• Specify wire rope size
• Specify leg length
• Specify end fittings

Standard Three Leg Bridle Sling Types

• 13-9-3 - Three leg wire rope bridle sling with an oblong master link at the top, alloy eye hooks at the bottom
• 13-9-2 - Three leg wire rope bridle sling with an oblong master link at the top, thimble eyes at the bottom

13-9-3 13-9-2

Three Leg Wire Rope Bridle Slings

Wire Rope Diameter Rated Capacity (Tons) (2000 lbs.) Standard Hardware Included
(in.)
60 Degrees 45 Degrees 30 Degrees Alloy Master link (in.) Eye Hooks
1/4 1.7 1.4 .97 3/4 0.75 ton S-320C
3/8 3.7 3.0 2.2 1 1.5 ton S-320C
1/2 6.6 5.4 3.8 1-1/4 3 ton S-320C
5/8 10.0 8.3 5.9 1-1/4 5 ton S-320A
3/4 15.0 12 8.4 1-1/2 7 ton S-320A
7/8 20.0 16 11 1-1/2 11 ton S-320A
1 26.0 21 15 1-3/4 11 ton S-320A
1 1/8 31.0 26 18 2 15 ton S-320A
1 1/4 38.0 31 22 2 15 ton S-320A
1 3/8 46.0 38 27 2-1/4 22 ton S-320A
1 1/2 55.0 45 32 2-1/2 22 ton S-320A
1-3/4 74 60 42 2-3/4 30 ton S-320A
2 95 78 55 3 37 ton S-320A

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

20 | nelsonwirerope.com
 WIRE ROPE BRIDLE SLINGS

FOUR LEG WIRE ROPE BRIDLE SLINGS

Features
• Flemished eye splice
• Sizes available from 1/4” to 2”
• 6x19 & 6x37 class bright EIPS IWRC wire rope
• Galvanized & stainless steel wire rope available upon request
• Heavy duty steel tag
• 5 to 1 design factor
• Proof testing available upon request Length
• Made in Hatfield, PA.

How To Order
• Specify wire rope size
• Specify leg length
• Specify end fittings

Standard Four Leg Bridle Sling Types

• 14-9-3 - Four leg wire rope bridle sling with an oblong master link at the top, alloy eye hooks at the bottom
• 14-9-2 - Four leg wire rope bridle sling with an oblong master link at the top, thimble eyes at the bottom

14-9-3 14-9-2

Four Leg Wire Rope Bridle Slings

Wire Rope Diameter Rated Capacity (Tons) (2000 lbs.) Standard Hardware Included
(in.)
60 Degrees 45 Degrees 30 Degrees Alloy Master link (in.) Eye Hooks
1/4 2.2 1.8 1.3 3/4 0.75 ton S-320C
3/8 5.0 4.1 2.9 3/4 1.5 ton S-320C
1/2 8.8 7.1 5.1 1 3 ton S-320C
5/8 14.0 11.0 7.8 1-1/4 5 ton S-320A
3/4 19.0 16.0 11.0 1-1/2 7 ton S-320A
7/8 26.0 21.0 15.0 1-1/2 11 ton S-320A
1 34.0 28.0 20.0 1-3/4 11 ton S-320A
1 1/8 42.0 34.0 24.0 2 15 ton S-320A
1 1/4 51.0 42.0 30.0 2 15 ton S-320A
1 3/8 62.0 50.0 36.0 2-1/2 22 ton S-320A
1 1/2 73.0 60.0 42.0 2-3/4 22 ton S-320A
1-3/4 98.0 80.0 57.0 2-3/4 30 ton S-320A
2 127.0 104.0 73.0 4 37 ton S-320A

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 21
WIRE ROPE ASSEMBLIES

SWAGE SOCKET ASSEMBLIES

Features How To Order
• 100% Termination Efficiency • Specify wire rope size
• Sizes available from 1/4” to 1-1/4” • Specify leg length (please note: length is measured at the
• Proof test to 2x its working load limit center of the pin and the center of the eye)
• 5 to 1 design factor • Specify end fittings
• Made in Hatfield, PA. • Specify termination plane
Length Length
Swage Socket Assembly Types
• 11-6-6SP - Open sockets on each end, pins on the same plane
• 11-6-6OP - Open sockets on each end, pins on opposite planes
• 11-6-7SP - Open socket on one end, closed socket on other end, pins on the same plane
• 11-6-7OP - Open socket on one end, closed socket on other end, pins on opposite planes
• 11-7-7SP- Closed sockets on both ends, pins on the same plane
• 11-7-7OP - Closed sockets on both ends, pins on the opposite planes

11-6-6SP (SAME PLANE) 11-6-6OP (OPPOSITE PLANE)

11-6-7SP (SAME PLANE) 11-6-7OP (OPPOSITE PLANE)

11-7-7SP (SAME PLANE) 11-7-7OP (OPPOSITE PLANE)

Swage Socket Assemblies

Wire Rope Diameter in Inches Minimum Pendant Length Vertical Capacity in Tons (2,000 lbs.)

1/4 11” .68

5/16 1’ 3” 1.1
3/8 1’ 3” 1.5
7/16 1’ 8” 2.0
1/2 1’ 8” 2.7
9/16 2’ 0” 3.4
5/8 2’ 0” 4.1
3/4 2’ 5” 5.9
7/8 2’ 10” 8.0
1 3’ 2” 10
1 1/8 3’ 7” 13
1 1/4 4’ 0” 16

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

22 | nelsonwirerope.com
 WIRE ROPE ASSEMBLIES

S-501 OPEN SWAGE SOCKETS

• Forged from special bar quality carbon steel, suitable for cold forming.
• Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
• Hardness controlled by spheroidize annealing.
• Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations
User’s Manual).
• Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper “After Swage”
dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform
shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.
• Designed to quickly determine whether the socket has been through the swaging operation and assist in field
inspections, it does not eliminate the need to perform standard production inspections which include gauging for the
proper “After Swage” dimensions or proof loading.
Rope Size Before Swage Dimensions (in.) Tolerance Max.
+/- After
S-501 S-501B Wt. Ultimate Swage
Stock Stock Each Load** Dim.
No. No. † (in.) (mm) (lbs.) (t) A B C D E F H L M N H (in.)
1039021 1054001 1/4 6 .52 5.4 4.78 .50 1.38 .69 .27 2.19 .69 4.00 .38 1.47 .06 .46
1039049 1054010 5/16 8 1.12 11.8 6.30 .78 1.62 .81 .34 3.25 .80 5.34 .48 1.67 .06 .71
1039067 1054029 3/8 9-10 1.30 13.6 6.30 .78 1.62 .81 .41 3.25 .80 5.34 .48 1.67 .06 .71
1039085 1054038 7/16 11-12 2.08 18.1 7.82 1.01 2.00 1.00 .49 4.31 1.00 6.69 .56 1.96 .06 .91
1039101 1054047 1/2 13 2.08 21.3 7.82 1.01 2.00 1.00 .55 4.31 1.00 6.69 .56 1.96 .06 .91
1039129 1054056 9/16 14 4.67 31.8 9.54 1.27 2.38 1.19 .61 5.38 1.25 8.13 .68 2.21 .06 1.16
1039147 1054065 5/8 16 4.51 34.9 9.54 1.27 2.38 1.19 .68 5.38 1.25 8.13 .68 2.21 .06 1.16
1039165 1054074 3/4 18-20 7.97 43.5 11.61 1.56 2.75 1.38 .80 6.44 1.50 10.00 .80 2.69 .06 1.42
1039183 1054083 7/8 22 11.52 51.5 13.37 1.72 3.13 1.63 .94 7.50 1.75 11.63 .94 3.20 .07 1.55
1039209 1054092 1 24-26 17.80 71.4 15.47 2.00 3.69 2.00 1.07 8.63 2.00 13.38 1.07 3.68 .08 1.80
1039227 1054104 1-1/8 28 25.25 83.3 17.35 2.25 4.12 2.25 1.19 9.63 2.25 15.00 1.19 4.18 .10 2.05
1039245 1054113 1-1/4 32 35.56 109 19.20 2.53 4.59 2.50 1.34 10.69 2.50 16.50 1.27 4.68 .10 2.30

S-502 CLOSED SWAGE SOCKETS

• Forged from special bar quality carbon steel, suitable for cold forming.
• Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
• Hardness controlled by spheroidize annealing.
• Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User’s
Manual).
• Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper “After Swage” dimension.
Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is
created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.
• Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it
does not eliminate the need to perform standard production inspections which include gauging for the proper “After Swage”
dimensions or proof loading.
Rope Size Max.
S-502 Wt. Ultimate Before Swage Dimensions (in.) After
Stock Each Load** Swage
No. (in.) (mm) (lbs.) (t) A B C D E F H L Dim. (in.)
1039325 1/4 6 .33 5.4 4.28 .50 1.38 .76 .27 2.19 .50 3.50 .46
1039343 5/16 8 .75 11.8 5.42 .77 1.62 .88 .34 3.25 .68 4.50 .71
1039361 3/8 9-10 .72 13.6 5.42 .78 1.62 .88 .41 3.25 .68 4.50 .71
1039389 7/16 11-12 1.42 18.1 6.88 1.01 2.00 1.07 .49 4.31 .87 5.75 .91
1039405 1/2 13 1.42 21.3 6.88 1.01 2.00 1.07 .55 4.31 .87 5.75 .91
1039423 9/16 14 2.92 31.8 8.59 1.27 2.38 1.28 .61 5.38 1.14 7.25 1.16
1039441 5/8 16 2.85 34.9 8.59 1.27 2.38 1.28 .68 5.38 1.14 7.25 1.16
1039469 3/4 18-20 5.00 43.5 10.25 1.56 2.88 1.49 .80 6.44 1.33 8.63 1.42
1039487 7/8 22 6.80 51.5 11.87 1.72 3.12 1.73 .94 7.50 1.53 10.09 1.55
1039502 1 24-26 10.40 71.4 13.56 2.00 3.62 2.11 1.07 8.63 1.78 11.50 1.80
1039520 1-1/8 28 14.82 83.3 15.03 2.25 4.00 2.37 1.19 9.75 2.03 12.75 2.05
1039548 1-1/4 32 21.57 109 16.94 2.53 4.50 2.62 1.34 10.81 2.25 14.38 2.30
Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 23
WIRE ROPE ASSEMBLIES

ROLL OFF CABLE ASSEMBLIES

Features
• Sizes available from 1/4” to 1-1/2”
• 6x25 or 6x37 IWRC EIPS wire rope
• Made in Hatfield, PA.
• Heavy duty steel tag available upon request

How To Order Length

• Specify wire rope size (7/8” is standard)
• Specify Overall length
• Specify end fitting
• Specify button length and diameter

Cable Assembly Types

• 11-9-0 - Cable assembly with a thimble eye and master link on one end
• 11-8-0 - Cable assembly with a thimble eye and pear link on one end
• 11-CE-0 - Cable assembly with a swaged button and a roll-off hook on one end
• 11-SB-0- Cable assembly with a swaged button on one end
• 11-SB-SB - Cable assembly with swaged buttons on both ends

11-9-0 11-8-0 11-CE-0 11-SB-0 11-SB-SB

ROLL OFF CONTAINER STRAP ROLL OFF HOOK

• Heavy duty design
• To provide for compliance with DOT
standard 49 CFR section 393.134, • Alloy steel for strength and durability
this hook is suitable for connecting • For 7/8” wire rope
to the bottom rails of a standard roll- • 17,000 lb. working load limit
on/roll-off waste container.
• 4.075” W x 12.27 L
• Working Load Limit: 5,000 lbs./2270
kgs.
• Weight: 2.8 lbs., 1.3 kgs.

Stock Number Working Load Limit Length in Feet Stock Number Working Load Limit Dimensions
1400-7700 5,000 lbs. 3” x 5’ 1400-7700 17,000 lbs. 4.075” W x 12.27 L
1400-7600 5,000 lbs. 4” x 5’

24 | nelsonwirerope.com
 WIRE ROPE ASSEMBLIES

PIPE CARRIER LIFTING SLING

An efficient way to handle concrete water and sewer pipe

Pipe Carrier slings can be made to any length to fit the specific needs of your application. Each sling has a
standard eye on one and a button on the other end. Button Length can also be adjusted per your request

Stock No. Tea Cup Model Number Wire Rope Diameter (in.) Sling Length (ft.)
550-2980 PC-3/4 (F) 7/8 5
550-3400 PC-1 (F) 1-1/4 5
550-3430 PC-1 1/2 (F) 1-1/2 5

TEA CUP PIPE CARRIER

Light-weight and ecomonical solution for
handling large precast concrete pipes.

Features:
• An efficient way to handle concrete water and
sewer pipes.
• The Caldwell “Tea Cup” Pipe Carrier will save you
time and money.
• Three sizes available, to handle from 3/4” to 1-1/2”
cable, and lift up to 18 tons.
• Optional “Spoon Handle” allows the PC-3/4 “Tea
Cup” to be guided into small diameter pipes.
• Complies with ASME standards.

Stock Model Rope Diameter Rated Capacity A B C D E F G Unit Weight

Number Number in Inches in Tons (in.) (in.) (in.) (in.) (in.) (in.) (in.) in Pounds
400-3370 PC-3/4 7/8 6.6 5.56 2 2.13 1.13 4.75 1.75 1.13 9
400-3380 PC-1 1 1/4 13 6 2.50 2.63 1.38 5.75 1.75 1.38 12
400-3390 PC-1 1/2 1 1/2 18 8 3 3.25 1.63 7.63 2.75 1.63 22

LOW PROFILE TEA CUP

PIPE CARRIER
Light-weight and ecomonical solution for
handling large precast concrete pipes.

Features:
• Low Profile design required only wire rope be inserted
through pipe.
• An efficient way to handle concrete water and sewer
pipes.
• The Caldwell “Tea Cup” Pipe Carrier will save you time
and money.
• Three sizes available, to handle from 3/4” to 1-1/2”
cable, and lift up to 18 tons.
• Optional “Spoon Handle” allows the PC-3/4 “Tea Cup”
to be guided into small diameter pipes.
• Complies with ASME standards.

Stock Model Rope Diameter Rated Capacity A C H G Unit Weight

Number Number in Inches in Tons (in.) (in.) (in.) (in.) in Pounds
400-3375 PC-3/4-F 7/8 6.6 5.56 2.13 3.44 1.13 9
400-3386 PC-1-F 1 1/4 13 6 2.63 4.38 1.38 12
400-3388 PC-1 1/2-F 1 1/2 18 8 3.25 5.13 1.63 22

215.721.9333 | 25
CHAIN SLINGS

GRADE 100 SINGLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 9/32” to 1-1/4”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor
• Made in Hatfield, PA.
Length
How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Single Leg Sling Models

• SOO - Single leg chain sling with oblong master links on each end
• SOS - Single leg chain sling with oblong master link on one end, clevis sling hook on other end
• SOG - Single leg chain sling with oblong master link on one end, clevis grab hook on other end
• SOSL - Single leg chain sling with oblong master link on one end, clevis self-locking hook on other end
• SSS - Single leg chain sling with clevis sling hooks on both ends
• SGS - Single leg chain sling with clevis sling hook on one end, clevis grab hook on other end
• SGG - Single leg chain sling with clevis grab hooks on both ends

SOO SOS SOG SOSL SOF SSS SGS SGG

Grade 100 Single Leg Alloy Chain Slings

Chain Size Alloy Master Link Dimensions

Chain (in.)
Rated Capacity (lbs.)
Grade
(in.) (mm) Size Diameter Inside Width Inside Length
9/32 7.0 100 4,300 1/2W 0.62 2.80 5.00
3/8 10.0 100 8,800 3/4W 0.73 3.20 6.00
1/2 13.0 100 15,000 7/8W 0.88 3.75 6.38
5/8 16.0 100 22,600 1-1/4W 1.33 5.50 9.50
3/4 20.0 100 35,300 1-1/4W 1.33 5.50 9.50
7/8 22 100 42,700 1-3/4 1.75 6.00 12.00
1 26 100 59,700 1-3/4 1.75 6.00 12.00
1 1/4 32 100 90,400 2 2.00 7.00 14.00

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

26 | nelsonwirerope.com
 CHAIN SLINGS

GRADE 100 DOUBLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 9/32” to 1-1/4”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor
• Made in Hatfield, PA.
Length

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Double Leg Sling Models

• DOS - Double leg chain sling with an oblong master link at the top, clevis sling hooks at the bottom
• DOSL - Double leg chain sling with an oblong master link at the top, clevis self-locking hooks at the bottom
• DOG - Double leg chain sling with an oblong master link at the top, clevis grab hooks at the bottom
• DOSA - Double leg chain sling with an oblong master link and grab hooks at the top for adjusting leg length ,clevis sling hooks at the bottom
• DOSB - Double leg chain sling with an oblong master link, grab hooks and one foot of chain at the top for adjusting leg length, clevis sling hooks at the bottom
• DOF - Double leg chain sling with an oblong master link, clevis foundry hooks at the bottom (not pictured below)

DOS DOSL DOG DOSA DOSB

Grade 100 Double Leg Alloy Chain Slings

Chain Size Rated Capacity (lbs.) Alloy Master Link Dimensions

Chain (in.)
Grade
(in.) (mm) 60˚ 45˚ 30˚
Size Diameter Inside Width Inside Length
9/32 7.0 100 7,500 6,100 4,300 1/2W 0.62 2.80 5.00

3/8 10.0 100 15,200 12,400 8,800 7/8W 0.88 3.75 6.38
1/2 13.0 100 26,000 21,200 15,000 1W 1.10 4.30 7.50
5/8 16.0 100 39,000 32,000 22,600 1-1/4W 1.33 5.50 9.50
3/4 20.0 100 61,100 49,900 35,300 1-1/2W 1.61 5.90 10.50
7/8 22 100 74,000 60,400 42,700 1-3/4 1.75 6.00 12.00
1 26 100 103,400 84,400 59,700 2 2.00 7.00 14.00
1 1/4 32 100 156,600 127,800 90,400 2-1/2 2.5 8.38 16.00

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 27
CHAIN SLINGS

GRADE 100 TRIPLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 9/32” to 1-1/4”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor Length
• Made in Hatfield, PA.

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Triple Leg Sling Models

• TOS - Triple leg chain sling with an oblong master link at the top, clevis sling hooks at the bottom
• TOSL - Triple leg chain sling with an oblong master link at the top, clevis self-locking hooks at the bottom
• TOG - Triple leg chain sling with an oblong master link at the top, clevis grab hooks at the bottom
• TOSA - Double leg chain sling with an oblong master link and grab hooks at the top for adjusting leg length ,clevis sling hooks at the bottom (not pictured below)
• TOSB - Double leg chain sling with an oblong master link, grab hooks and one foot of chain at the top for adjusting leg length, clevis sling hooks at the bottom
(not pictured below)
• TOF - Triple leg chain sling with an oblong master link, clevis foundry hooks at the bottom (not pictured below)

TOS TOSL TOG

Grade 100 Triple Leg Alloy Chain Slings

Chain Size Rated Capacity (lbs.) Alloy Master Link Assembly Dimensions
Chain (in.)
Grade
(in.) (mm) 60˚ 45˚ 30˚
Size Diameter Inside Width Inside Length
9/32 7.0 100 11,200 9,100 6,450 3/4W 0.73 3.20 6.00

3/8 10.0 100 22,800 18,600 13,200 1W 1.10 4.30 7.50

1/2 13.0 100 39,000 31,800 22,500 1-1/4W 1.33 5.50 9.50
5/8 16.0 100 58,700 47,900 33,900 1-1/2W 1.61 5.90 10.50
3/4 20.0 100 91,700 74,900 53,000 1-3/4 1.75 6.00 12.00
7/8 22 100 110,900 90,600 64,000 2-1/4 2.25 8.00 16.00
1 26 100 155,100 126,000 89,550 2-1/4 2.25 8.00 16.00
1 1/4 32 100 234,900 191,700 135,600 3-1/4 3.25 10.00 20.00

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

28 | nelsonwirerope.com
 CHAIN SLINGS

GRADE 100 QUADRUPLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 9/32” to 1-1/4”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
Length
• 4 to 1 safety factor
• Made in Hatfield, PA.

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Quadruple Leg Sling Models

• QOS - Quadruple leg chain sling with an oblong master link at the top, clevis sling hooks at the bottom
• QOSL - Quadruple leg chain sling with an oblong master link at the top, clevis self-locking hooks at the bottom
• QOG - Quadruple leg chain sling with an oblong master link at the top, clevis grab hooks at the bottom
• QOSA - Quadruple leg chain sling with an oblong master link and grab hooks at the top for adjusting leg length ,clevis sling hooks at the bottom (not pictured below)
• QOSB - Quadruple leg chain sling with an oblong master link, grab hooks and one foot of chain at the top for adjusting leg length, clevis sling hooks at the bottom
(not pictured below)
• QOF - Quadruple leg chain sling with an oblong master link, clevis foundry hooks at the bottom (not pictured below)

QOS QOSL QOG

Grade 100 Quadruple Leg Alloy Chain Slings

Chain Size Rated Capacity (lbs.) Alloy Master Link Assembly Dimensions
Chain (in.)
Grade
(in.) (mm) 60˚ 45˚ 30˚
Size Diameter Inside Width Inside Length
9/32 7.0 100 11,200 9,100 6,450 3/4W 0.73 3.20 6.00

3/8 10.0 100 22,800 18,600 13,200 1W 1.10 4.30 7.50

1/2 13.0 100 39,000 31,800 22,500 1-1/4W 1.33 5.50 9.50
5/8 16.0 100 58,700 47,900 33,900 1-1/2W 1.61 5.90 10.50
3/4 20.0 100 91,700 74,900 53,000 1-3/4 1.75 6.00 12.00
7/8 22 100 110,900 90,600 64,000 2-1/4 2.25 8.00 16.00
1 26 100 155,100 126,000 89,550 2-1/4 2.25 8.00 16.00
1 1/4 32 100 234,900 191,700 135,600 3-1/4 3.25 10.00 20.00

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 29
GRABIQ CHAIN SLINGS

GRADE 100 GRABIQ SINGLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 5/16” to 5/8”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor
• Made in Hatfield, PA. Length

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Single Leg Sling Models

• MG-GBK - Single leg chain sling with a master grab link at the top, clevis self locking grip hook at the bottom
• MG-EKGN - Single leg chain sling with a master grab link at the top, clevis self sling hook at the bottom
• MG-LKBK - Single leg chain sling with a master grab link at the top, swivel hook with bearing at the bottom
• TG1-GBK - Single leg chain sling with master link and C-Grab at the top, clevis self locking grip hook at the bottom
• TL1-GBK - Single leg chain sling with master link and C-Lok at the top, clevis self locking grip hook at the bottom
• TL1X-GBK - Single leg chain sling with oversized master link and C-Lok at the top, clevis self locking grip hook at the bottom

MG-GBK MG-EKGN MG-LKBK TG1-GBK TL1-GBK TL1X-GBK

Grade 100 GrabIQ Single Leg Alloy Chain Slings

Chain Size Dimesions (in.)
Chain Rated Capacity Master Grab (MG) Oblong Master Link (MF) MFX Oversized Master Link (MFX
(in.) (mm) Grade (lbs.)
Inside Inside Inside Inside Inside Inside
Diameter Diameter Diameter
Width Length Width Length Width Length
5/16” 8.00 100 5,700 0.71 2.4 3.6 0.55 2.8 4.9 1.0 7.1 13.4

3/8 10.0 100 8,800 0.87 3.0 4.4 0.67 3.1 5.5 1.0 7.1 13.4

1/2 13.0 100 15,000 1.0 3.5 5.4 0.87 3.7 6.3 1.1 7.1 13.4

5/8 16.0 100 22,600 1.2 4.1 6.2 1.1 4.3 7.5 1.3 7.1 13.4

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

30 | nelsonwirerope.com
 GRABIQ CHAIN SLINGS

GRADE 100 GRABIQ DOUBLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 5/16” to 5/8”
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor
Length
• Made in Hatfield, PA.

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Double Leg Sling Models

• MGD-EGKN - Double leg chain sling with a master grab link at the top, clevis sling hooks at the bottom
• MGD-GBK - Double leg chain sling with a master grab link at the top, clevis self locking grip hooks at the bottom
• MGD-GC - Double leg chain sling with a master grab link at the top, clevis grab hooks at the bottom
• TG2-GBK - Double leg chain sling with an oblong master link and dual C-Grab at the top, clevis self locking grip hooks at the bottom
• TG2X-GBK - Double leg chain sling with an oversized oblong master link and dual C-Grab at the top, clevis self locking grip hooks at the bottom

MGD-EGKN MGD-GBK MGD-GC TG2-GBK TG2X-GBK

Grade 100 GrabIQ Double Leg Alloy Chain Slings

Chain Size Rated Capacity Dimesions (in.)
(lbs.)
Chain Master Grab Dual (MGD) Oblong Master Link (MF) Oversized Master Link (MFX)
(in.) (mm) Grade
60˚ 45˚ 30˚ Inside Inside Inside Inside Inside Inside
Dia. Dia. Dia.
Width Length Width Length Width Length
5/16” 8.00 100 9,900 8,100 5,700 0.83 3.0 3.9 0.67 3.1 5.5 1.0 7.1 13.4

3/8 10.0 100 15,200 12,400 8,800 0.94 3.5 4.9 0.87 3.7 6.3 1.1 7.1 13.4

1/2 13.0 100 26,000 21,200 15,000 1.2 4.1 5.9 1.1 4.3 7.5 1.3 7.1 13.4

5/8 16.0 100 39,000 32,000 22,600 1.4 4.7 6.9 1.3 5.5 9.4 1.5 7.1 13.4

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 31
GRABIQ CHAIN SLINGS

GRADE 100 GRABIQ TRIPLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 5/16” to 5/8”
• Every chain sling is proof test to 2x its working load limit Length
• Latches included with all sling hooks
• 4 to 1 safety factor
• Made in Hatfield, PA.

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Triple Leg Sling Models

• TG3-GBK - Triple leg chain sling with an oblong master link, dual C-Grab, and C-Grab at the top, clevis self-locking grip hooks at the bottom
• TG3-EGKN - Triple leg chain sling with an oblong master link, dual C-Grab, and C-Grab at the top, clevis sling hooks at the bottom
• TG3H-GBK - Triple leg chain sling with an oversized oblong master link, dual C-Grab, and C-Grab at the top, clevis self-locking grip hooks at the bottom

TG3-GBK TG3-EGKN TG3H-GBK

Grade 100 GrabIQ Triple Leg Alloy Chain Slings

Chain Size Rated Capacity Dimesions (in.)

(lbs.)
Chain Oblong Master Link (MF) Oversized Master Link (MFH)
(in.) (mm) Grade
60˚ 45˚ 30˚
Diameter Inside Width Inside Length Diameter Inside Width Inside Length

5/16” 8.00 100 14,800 12,100 8,500 0.87 3.7 6.3 0.9 4.9 9.1

3/8 10.0 100 22,800 18,600 13,200 1.1 4.3 7.5 1.1 5.3 9.8

1/2 13.0 100 39,000 31,800 22,500 1.3 5.5 9.4 1.3 5.3 11.0

5/8 16.0 100 58,700 47,900 33,900 1.6 5.9 9.8 1.6 6.9 12.6

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

32 | nelsonwirerope.com
 GRABIQ CHAIN SLINGS

GRADE 100 GRABIQ QUADRUPLE LEG ALLOY CHAIN SLINGS

Features
• Heavy duty steel identification tag
• Sizes available from 5/16” to 5/8”
Length
• Every chain sling is proof test to 2x its working load limit
• Latches included with all sling hooks
• 4 to 1 safety factor
• Made in Hatfield, PA.

How To Order
• Specify chain size
• Specify leg length (bearing point to bearing point)
• Specify end fittings

Standard Quadruple Leg Sling Models

• TG4-GBK - Quadruple leg chain sling with an oblong master link and dual C-Grabs at the top, clevis self-locking grip hooks at the bottom
• TG4-EGKN - Quadruple leg chain sling with an oblong master link and dual C-Grabs at the top, clevis sling hooks at the bottom
• TG4H-EGKN - Quadruple leg chain sling with an oversized oblong master link and dual C-Grabs at the top, clevis sling hooks at the bottom

TG4-GBK TG4-EGKN TG4H-EGKN

Grade 100 GrabIQ Quadruple Leg Alloy Chain Slings

Chain Size Rated Capacity Dimesions (in.)

(lbs.)
Chain Oblong Master Link (MF) Oversized Master Link (MFH)
(in.) (mm) Grade
60˚ 45˚ 30˚ Inside Inside
Diameter Inside Width Diameter Inside Width
Length Length
5/16” 8.00 100 14,800 12,100 8,500 0.87 3.7 6.3 0.9 4.9 9.1
3/8 10.0 100 22,800 18,600 13,200 1.1 4.3 7.5 1.1 5.3 9.8

1/2 13.0 100 39,000 31,800 22,500 1.3 5.5 9.4 1.3 5.3 11.0

5/8 16.0 100 58,700 47,900 33,900 1.6 5.9 9.8 1.6 6.9 12.6

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 33
WEB SLINGS

EYE & EYE WEB SLINGS

Eye & Eye “EE” Web slings are made with a loop, or eye, on each end of
the body. Eyes vary depending on the application but may be ordered as
follows:

TYPE III
“EE” Web sling made with a flat loop eye on each end with loop eye opening
on same plane as the sling body. This type of sling is sometimes called: flat
eye & eye; eye & eye or double eye sling. Versatile and flexible, this sling can
be used in all three hitches (vertical, basket and choker).

TYPE IV
“TE” Web sling made with a loop eye on each end that is a at a right angle
to the plane of the sling body. This type of sling is commonly referred to as a
“twisted eye” sling. This sling is suitable for all hitches, but is recommended
particularly for choker hitch application.

Wear pad in eyes for extra protection

come standard on all EE92 Slings

Rated Capacity Eye Dimensions Approximate Sling

(lbs.) (inches) Weight (lbs.)
Part Web Width Min. Standard
# of Plys No. (Inches) Vertical Choke Basket Width Length Length (ft) Base Adder/ft.
EE191 1 1,600 1,250 3,200 1 9 3 .40 .06
EE192 2 3,200 2,500 6,400 2 9 4 .90 .12
1 EE193 3 4,800 3,800 9,600 1-1/2 9 4 1.40 .18
EE194 4 6,400 5,000 12,800 2 12 4 1.90 .24
EE196 6 9,300 7,440 18,600 2 14 5 3.40 .36
EE291 1 3,200 2,500 6,400 1 9 3 .40 .13
EE292 2 6,400 5,000 12,800 2 9 3 .90 .25
2 EE293 3 9,300 7,440 18,600 1-1/2 12 4 1.70 .38
EE294 4 11,500 9,200 23,000 2 12 4 2.30 .50
EE296 6 16,500 13,200 33,000 2 14 6 4.90 .76
EE391 1 4,100 3,280 8,200 1 12 4 1.0 .20
EE392 2 8,300 6,640 16,600 2 12 4 2.10 .40
3 EE393 3 12,500 10,000 25,000 1-1/2 18 5 3.70 .59
EE394 4 16,000 12,800 32,000 2 18 5 5.00 .79
EE396 6 23,000 18,400 46,000 3 20 5 7.60 1.2
EE491 1 6,200 4,960 12,400 1 12 4 1.10 .26
EE492 2 12,400 9,920 24,800 2 12 4 2.20 .53
4 EE493 3 17,000 13,600 34,000 1-1/2 18 5 4.10 .79
EE494 4 22,000 17,600 44,000 2 18 5 5.50 1.1
EE496 6 33,000 26,400 66,000 3 20 5 8.30 1.6

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

34 | nelsonwirerope.com
 WEB SLINGS

ENDLESS WEB SLINGS

“EN” Web slings are a continuous loop formed by
joining ends of the webbing together with a loadbearing splice. They are extremely
versatile as the design allows for rotation of bearing points, avoiding one constant
bearing point and thereby increasing useful life. They are suitable for use with all three
hitches: vertical, basket and choker.
Length

Rated Capacity Approximate Sling Weight

(lbs.) (lbs.)
Part Web Width Min. Standard
# of Plys No. (Inches) Vertical Choke Basket Length (ft) Base Adder/ft.
EN191 1 3,200 2,500 6,400 3 .40
EN192 2 6,400 5,000 12,800 3 .80
1 EN193 3 8,600 6,900 17,200 3 1.30
EN194 4 11,500 9,200 23,000 3 1.70
EN196 6 16,300 13,000 32,600 3 2.50
EN291 1 6,200 4,900 12,400 3 .80
EN292 2 12,200 9,800 24,400 3 1.60
2 EN293 3 16,300 13,000 32,600 3 2.50
EN294 4 20,700 16,500 41,400 3 3.30
EN296 6 28,600 23,000 57,200 3 4.90
EN391 1 8,000 6,400 16,000 3 1.20
EN392 2 16,000 12,800 32,000 3 2.40
3 EN393 3 21,500 17,200 43,000 3 3.60
EN394 4 28,700 23,000 57,400 3 4.80
EN396 6 40,700 32,500 81,400 3 7.20
EN491 1 10,000 8,000 20,000 3 1.60
EN492 2 19,800 15,800 39,600 3 3.20
4 EN493 3 26,700 21,300 53,400 3 4.90
EN494 4 35,600 28,400 71,200 3 6.50
EN496 6 50,500 40,400 101,000 3

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 35
WEB SLINGS

REVERSED EYE WEB SLINGS

The Workhorse of all web slings. When application is continuous or abusive, Reversed Eye Slings will
outlive all other sling types. Type “RE” slings have wear pads on both sides of the body and eyes.

TYPE VI
Reversed Eye “RE” (return eye) slings are formed by using multiple widths of webbing held edge to edge. A
wear pad is attached on both sides of the web sling body, and on both sides of the loop eyes to form a loop
eye at each end, which is at a right angle to the plane of the web sling body. The Reversed Eye sling can be
used with all three hitch types (vertical, basket, choker), but is particularly well suited to the choker hitch due
to the “twisted eye.”

Rated Capacity Eye Dimensions

(lbs.) (inches)
Part Web Width Min. Standard
# of Plys No. (Inches) Vertical Choke Basket Width Length Length (ft)
RE1-902 2 4,600 3,680 9,200 1 9 3

RE1-903 3 6,900 5,520 13,800 1-1/2 12 4

1
RE1-904 4 8,600 6,880 17,200 1 12 4
RE1-906 6 12,000 9,600 24,000 1-1/2 14 6
RE2-902 2 7,700 6,160 15,400 1 12 3
RE2-903 3 11,600 9,280 23,200 1-1/2 12 4
2
RE2-904 4 14,500 11,600 29,000 2 18 6
RE2-906 6 17,400 13,920 34,800 1-1/2 18 6

TRIANGLE CHOKER WEB SLINGS

TYPE I
Choker Hardware (CH) slings are made with a triangle fitting on one end and a slotted triangle choker
fitting on the other end. The CH configuration provides the most efficient and effective method of
choke hitching of all sling types and configurations. This sling type can also be used in a vertical and
basket hitch. Fittings can be of aluminum or alloy steel.

Rated Capacity
(lbs.)
Part Web Width Min. Standard
# of Plys Number (Inches) Vertical Choke Basket Length (ft)
TC1-902 2 3,200 2,500 6,400 3

TC1-903 3 4,800 3,800 9,600 3

1
TC1-904 4 6,400 5,000 12,800 3
TC1-906 6 9,600 7,600 19,200 3
TC2-902 2 6,400 5,000 12,800 3
TC2-903 3 8,900 7,200 17,800 3
2
TC2-904 4 12,000 9,600 24,000 3
TC2-906 6 17,000 13,000 34,000 3

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

36 | nelsonwirerope.com
 WEB SLINGS

WEB BRIDLE SLINGS

Choker Hardware (CH) slings are made with a triangle fitting on one
end and a slotted triangle choker fitting on the other end. The CH
configuration provides the most efficient and effective method of choke
hitching of all sling types and configurations. This sling type can also be
used in a vertical and basket hitch. Fittings can be of aluminum or alloy
steel.

Single Leg Web Bridle Slings

Part Number Top Fitting Bottom Fitting Capacity (lbs)
SOS-EE191 Oblong Master Link Eye Sling Hook 1600

SOO-EE191 Oblong Master Link Oblong Master Link 1600

SSS-EE191 Eye Sling Hook Eye Sling Hook 1600
SOS-EE291 Oblong Master Link Eye Sling Hook 3200
SOO-EE291 Oblong Master Link Oblong Master Link 3200
SSS-EE291 Eye Sling Hook Eye Sling Hook 3200
SOS-EE292 Oblong Master Link Eye Sling Hook 6400
SOO-EE292 Oblong Master Link Oblong Master Link 6400
SSS-EE292 Eye Sling Hook Eye Sling Hook 6400

Double Leg Web Bridle Slings

Capacity in lbs. at Horizontal Angle
Part Number Top Fitting Bottom Fittings
60 45 30
DOS-EE191 Oblong Master Link Eye Sling Hooks 2770 2260 1600

DOO-EE191 Oblong Master Link Oblong Master Links 2770 2260 1600
DOS-EE291 Oblong Master Link Eye Sling Hooks 5540 4520 3200
DOO-EE291 Oblong Master Link Oblong Master Links 5540 4520 3200
DOS-EE292 Oblong Master Link Eye Sling Hooks 11090 9050 6400
DOO-EE292 Oblong Master Link Oblong Master Links 11090 9050 6400

Quadruple Leg Web Bridle Slings

Capacity in lbs. at Horizontal Angle
Part Number Top Fitting Bottom Fittings
60 45 30
QOS-EE191 Oblong Master Link Eye Sling Hooks 5540 4520 3200

QOO-EE191 Oblong Master Link Oblong Master Links 5540 4520 3200
QOS-EE291 Oblong Master Link Eye Sling Hooks 11090 9050 6400
QOO-EE291 Oblong Master Link Oblong Master Links 11090 9050 6400
QOS-EE292 Oblong Master Link Eye Sling Hooks 22180 18100 12800
QOO-EE292 Oblong Master Link Oblong Master Links 22180 18100 12800

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 37
ENDLESS ROUND SLINGS

ENDLESS ROUND SLINGS

Round Slings offer the user the ultimate in lifting security and rigging ease. Round Slings are constructed from a
continuous loop of 100% polyester fiber. Each Round Sling is covered with a double polyester woven jacket to
protect the load-bearing fibers from damage. Because the load-bearing fibers never come in contact with the
load, they are protected from cuts, abrasions and ultraviolet degradation. Each sling has a tough, resilient tag for
quick and easy identification.

ADVANTAGES:
• Reduce cost with less total rigging weight
• Easy handling and storage
• Reduce risk of back and hand injuries
• Cover abrasion will not reduce capacity
• Provides a strong grip on loads
• Provides a tighter choke with an easier release
• Capacities are color coded

Part Sling Vertical Choker Basket Minimum Approx Weight Approx. Body Approx. Width
Size
Number Color Capacity (lbs.) Capacity (lbs.) Capacity (lbs.) Length (ft.) (lbs/ft.) Dia. Relaxed (in.) At Load (in.)
1 E30 Purple 2,600 2,100 5,200 1.5 0.3 .50 1.68

2 E60 Green 5,300 4,200 10,600 1.5 0.4 .80 1.82

3 E90 Yellow 8,400 6,700 16,800 2.0 0.5 1.10 2.04

4 E120 Tan 10,600 8,500 21,200 3.0 0.6 1.10 2.10

5 E150 Red 13,200 10,600 26,400 3.0 0.8 1.32 2.50

6 E180 White 16,800 13,400 33,600 3.0 1.0 1.65 3.2

7 E240 Blue 21,200 17,000 42,400 3.0 1.2 1.72 3.13

8 E300 Orange 25,000 20,000 50,000 3.0 1.6 1.90 3.00

9 E360 Grey 31,000 24,800 62,000 3.0 2.0 2.15 3.50

10 E480 Maroon 40,000 32,000 80,000 8.0 2.5 2.20 3.21

11 E600 Brown 53,000 42,400 106,000 8.0 3.2 2.75 4.62

12 E800 Olive 66,000 52,800 132,000 8.0 3.7 3.12 5.25

13 E1000 Black 90,000 72,000 180,000 8.0 4.2 3.62 6.00

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

38 | nelsonwirerope.com
 ENDLESS ROUND SLINGS

MAGNUM FORCE ROUND SLINGS

Magnum Force® Roundslings for Heavy Duty High Capacity Performance

• Up to 50% lighter than conventional round slings for even better manual handling
• Up to 50% slimmer than conventional round slings
• Can be laid against tighter edge radii than conventional PES slings
• Shackle and hardware interface is therefore less crowded
• Variable load bearing point for more even wear
• Ideal for choke lifting cylindrical objects without creasing
• Less creasing means less wear
• Lifts smooth objects without damage
• High strength to weight ratio
• Reinforced high performance woven cover
• WLL data woven into sleeve for unmistakeable capacity identification
• Wide range of capacities from 10,000 to 600,000 lbs (and larger upon request)
• Available in lengths up to 98 ft
• Round Slings are repairable upon manufacturers inspection

Compact
The innovative construction with a high performance polyester fiber and a compact protective cover partially woven with the same material make the
Magnum Force Roundsling up to 50% slimmer than comparable roundslings with the same load bearing capacity. At the same time, it produces greater
stiffness within the sling along both axis. The roundsling is not bunched even in smaller crane hooks and attachment points and it is easy to suspend the
sling overhead.

Wear Resistant
Outer protective cover is reinforced with an extremely abrasion and tear resistant high performance polyester. In addition, the special design reduces
the formation of bunching at the attachment point, which again significantly improves the wear behavior. Magnum Force Roundsling exhibits the greatest
reliability and longest durability even under the harshest operating conditions – an economic factor you can count on.

Resilient
The new, high performance fiber has a significantly greater capacity. Consequently, less material is needed in the fabric, which makes the Magnum Force
Roundsling up to 50% lighter than conventional roundslings. With the same load capacity, this high performance roundsling can be laid against tighter
edge radii than conventional polyester slings. Work becomes more efficient, quicker and safer.

Compliant
Magnum Force inner load bearing core is made from the same material as the outer sleeve. This is to ensure any chemical damage indications are
consistent with both inner and outer materials. ASME B30.9-2014

Identifiable
The Magnum Force has an extra sleeve with a raised, woven-in load capacity indicator- a safety feature that has proved to be a success. The load capacity
is clearly identifiable even from a distance in the dirtiest conditions. Confusing the roundslings is therefore effectively avoided, protecting people and
material from accidents.

Part Vertical Choker Basket Capacity (lbs.) Basket Capacity (lbs.) Basket Capacity (lbs.) Approx Approx Weight
Number Capacity (lbs.) Capacity (lbs.) 90˚ 60˚ 45˚ Diameter (in.) per foot (lbs.)

RCHPE20 20,000 16,000 40,000 34,640 28,280 1.85 0.6

RCHPE30 30,000 24,000 60,000 51,960 42,420 2.2 .85
RCHPE40 40,000 32,000 80,000 69,280 56,560 2.70 1.0
RCHPE50 50,000 40,000 100,000 86,600 70,700 2.80 1.15
RCHPE60 60,000 48,000 120,000 103,920 84,840 3 1.30
RCHPE80 80,000 64,000 160,000 138,560 113,120 3.70 1.60
RCHPE100 100,000 80,000 200,000 173,200 141,400 4 1.8
RCHPE125 125,000 100,000 250,000 216,500 176,750 5.10 2.5
RCHPE150 150,000 120,000 300,000 259,800 212,100 6.80 3.3
RCHPE200 200,000 160,000 400,000 346,400 282,800 8 5.25
RCHPE250 250,000 200,000 500,000 433,000 353,500 9.10 5.85
RCHPE300 300,000 240,000 600,000 519,600 424,200 10.55 7.0

DO NOT EXCEED RATED CAPACITY OR ANGLE UPON WHICH IT IS BASED. A FALLING LOAD
WARNING MAY CAUSE SERIOUS INJURY OR DEATH. INSPECT SLING FOR DAMAGE BEFORE EACH USE.

215.721.9333 | 39
RIGGING HARDWARE

G-209 SCREW PIN ANCHOR SHACKLES

• Capacities 1/3 thru 55 metric tons, grade 6.
• Forged - Quenched and Tempered, with alloy pins.
• Working Load Limit and grade “6” permanently shown on every shackle.
• Hot Dip galvanized or self colored.
• Fatigue rated.
• Shackles 25t and larger are RFID EQUIPPED.
• Shackles can be furnished proof tested with certificates to designated standards, such
as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the
time of order, charges will apply.
• Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).
• 3.25t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1-
Offshore Containers. These shackles are statistical proof and impact tested to 42 joules (31 ft-lbs.)
min. avg. at -20 degrees C (-4 degrees F). The tests are conducted by Crosby and 3.1 test certification
is available upon request.
• All other 209 and all 210 shackles can meet charpy requirements of 42 joules(31 ft-lbs) avg. at -20
degrees C (-4 degrees F) upon special request.
• Meets or exceeds all requirements of ASME B30.26.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7
and ABS Guide for Certification on Cranes available. Certificates available when requested at time of
order and may include additional charges.
• Crosby 3.25t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1
- Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are
conducted by Crosby and 3.1 test certification is available upon request.
• Look for the Red Pin®. . . the mark of genuine Crosby quality.

Nominal Working Weight Tolerance

Stock No. Dimensions (in.)
Size Load Limit Each +/-
(in.) (t)* (lbs.)
G-209 S-209 G-209OC A B C D E F G H L M P C A
3/16 1/3 1018357 – – .06 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.14 .19 .06 .06
1/4 1/2 1018375 1018384 – .10 .47 .31 1.13 .25 .78 .61 1.28 1.84 .19 1.43 .25 .06 .06
5/16 3/4 1018393 1018400 – .18 .53 .38 1.22 .31 .84 .75 1.47 2.09 .22 1.71 .31 .06 .06
3/8 1 1018419 1018428 – .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.02 .38 .13 .06
7/16 1-1/2 1018437 1018446 – .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.37 .44 .13 .06
1/2 2 1018455 1018464 – .72 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06
5/8 3-1/4 1018473 1018482 1262219 1.37 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06
3/4 4-3/4 1018491 1018507 1262228 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06
7/8 6-1/2 1018516 1018525 1262237 3.62 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06
1 8-1/2 1018534 1018543 1262246 5.03 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.13 1.06 .25 .06
1-1/8 9-1/2 1018552 1018561 1262255 7.41 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.71 1.25 .25 .06
1-1/4 12 1018570 1018589 1262264 9.50 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.25 1.38 .25 .06
1-3/8 13-1/2 1018598 1018605 1262273 13.53 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.83 1.50 .25 .13
1-1/2 17 1018614 1018623 1262282 17.20 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 .81 7.33 1.62 .25 .13
1-3/4 25 1018632 1018641 1262291 27.78 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 1.00 9.06 2.25 .25 .13
2 35 1018650 1018669 – 45.00 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.35 2.40 .25 .13
2-1/2 55 1018678 1018687 – 85.75 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13.00 3.13 .25 .25

Copyright © 2016 The Crosby Group LLC All Rights Reserved

40 | nelsonwirerope.com
 RIGGING HARDWARE

G-2130 BOLT TYPE ANCHOR SHACKLES

• Capacities 1/3 thru 150 metric tons, grade 6.
• Working Load Limit and grade “6” permanently shown on every shackle.
• Forged – Quenched and Tempered, with alloy bolts.
• Hot Dip galvanized or self colored. (85, 120, and 150 metric ton shackles
are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
• Fatigue rated (1/3t - 55t).
• Shackles 25t and larger are RFID EQUIPPED.
• Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F).
• Meets or exceeds all requirements of ASME B30.26.
• Shackles 85 metric tons and larger are individually proof tested to 2.0 times the
working load limit.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules
1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available
when requested at time of order and may include additional charges
• 3.1 Certification as standard available for charpy and statistical proof test from 3.25t
up to 25 tons to DNV2.7-1 and EN13889.
• Crosby 3.25t through 25t G2130OC anchor shackles are type approved to DNV Certification Notes
2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 joules
(31 ft-lbs.) min. avg. at -20 degree C (-4 degree F). The tests are conducted by Crosby and 3.1 test
certification is available upon request. Refer to page 88 for Crosby COLD TUFF® shackles that meet
the additional requirements of DNV rules for certification of lifting applications - Loose Gear.
• All other 2130 shackles can meet charpy requirements of 42 joules (31 ft-lbs) avg at -20 degree C (-4
degree F) when requested at time of order.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.

Weight Dimensions Tolerance

Nominal Working G-2130
Size Load Limit Stock Each (in.) +/-
(in.) (t)* No. (lbs.) A B C D E F H L M N C A
3/16 1/3 1019464 .06 .38 .25 .88 .19 .60 .56 1.47 .98 1.29 .19 .06 .06
1/4 1/2 1019466 .11 .47 .31 1.13 .25 .78 .61 1.84 1.28 1.56 .25 .06 .06
5/16 3/4 1019468 .22 .53 .38 1.22 .31 .84 .75 2.09 1.47 1.82 .31 .06 .06
3/8 1 1019470 .33 .66 .44 1.44 .38 1.03 .91 2.49 1.78 2.17 .38 .13 .06
7/16 1-1/2 1019471 .49 .75 .50 1.69 .44 1.16 1.06 2.91 2.03 2.51 .44 .13 .06
1/2 2 1019472 .79 .81 .64 1.88 .50 1.31 1.19 3.28 2.31 2.80 .50 .13 .06
5/8 3-1/4 1019490 1.68 1.06 .77 2.38 .63 1.69 1.50 4.19 2.94 3.56 .69 .13 .06
3/4 4-3/4 1019515 2.72 1.25 .89 2.81 .75 2.00 1.81 4.97 3.50 4.15 .81 .25 .06
7/8 6-1/2 1019533 3.95 1.44 1.02 3.31 .88 2.28 2.09 5.83 4.03 4.82 .97 .25 .06
1 8-1/2 1019551 5.66 1.69 1.15 3.75 1.00 2.69 2.38 6.56 4.69 5.39 1.06 .25 .06
1-1/8 9-1/2 1019579 8.27 1.81 1.25 4.25 1.13 2.91 2.69 7.47 5.16 5.90 1.25 .25 .06
1-1/4 12 1019597 11.71 2.03 1.40 4.69 1.29 3.25 3.00 8.25 5.75 6.69 1.38 .25 .06
1-3/8 13-1/2 1019613 15.83 2.25 1.53 5.25 1.42 3.63 3.31 9.16 6.38 7.21 1.50 .25 .13
1-1/2 17 1019631 19.00 2.38 1.66 5.75 1.53 3.88 3.63 10.00 6.88 7.73 1.62 .25 .13
1-3/4 25 1019659 33.91 2.88 2.04 7.00 1.84 5.00 4.19 12.34 8.80 9.68 2.25 .25 .13
2 35 1019677 52.25 3.25 2.30 7.75 2.08 5.75 4.81 13.68 10.15 10.81 2.40 .25 .13
2-1/2 55 1019695 98.25 4.13 2.80 10.50 2.71 7.25 5.69 17.90 12.75 13.58 3.13 .25 .25
3 85 1019711 154.00 5.00 3.30 13.00 3.12 7.88 6.50 21.50 14.62 15.13 3.62 .25 .25
3-1/2 120 1019739 265.00 5.25 3.76 14.63 3.62 9.00 8.00 24.88 17.02 17.00 4.38 .25 .25
4 150 1019757 338.00 5.50 4.26 14.50 4.00 10.00 9.00 25.68 18.00 17.75 4.56 .25 .25

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 41
RIGGING HARDWARE

CM CARBON ANCHOR SHACKLES

CM Industrial/Government-Rated Carbon Shackles are designed with a 5:1 design factor. An-
chor shackles can be side loaded or used for multiple connections.

• Manufactured from technically advanced micro alloy steel with optimal hardness for strength and ductility.
• All shackles have alloy quenched and tempered pins
• Working load limit and traceability codes shown as permanent markings on body
• Available in sizes 3/16” to 3-1/2”
• Available with galvanized finish per ASTM A153
• All bolt, nut & cotter shackles have thread-protected ends
• Shackles meet dimensional, marking and performance requirements of RR-C-271
• Standard industry tolerances apply
• Design factor 6:1 (2-1/2” and 3” carbon shackles have a 5:1 design factor)

Working Weight Screw Pin Bolt, Nut, & Cotter Pin Dimensions (in.)
Standard Size
Load Limit Each
(in.)
(t) (lbs.) Galvanized Orange Powder Coated Galvanized P E W R L B min
3/16 1/3 0.06 MC645G - - 0.25 0.29 0.38 0.57 0.88 0.58
1/4 1/2 0.12 MC646G MC646P MC846G 0.31 0.36 0.47 0.75 1.13 0.75
5/16 3/4 0.20 MC647G MC647P MC847G 0.38 0.45 0.53 0.84 1.25 0.81
3/8 1 0.30 MC648G MC648P MC848G 0.44 0.52 0.66 1.00 1.40 1.00
7/16 1-1/2 0.50 MC649G MC649P MC849G 0.50 0.58 0.72 1.15 1.69 1.19
1/2 2 0.75 MC650G MC650P MC850G 0.63 0.70 0.84 1.34 1.94 1.38
5/8 3-1/4 1.30 MC651G MC651P MC851G 0.75 0.83 1.06 1.66 2.41 1.63
3/4 4-3/4 2.25 MC652G MC652P MC852G 0.88 0.95 1.28 1.94 2.84 1.89
7/8 6-1/2 3.50 MC653G MC653P MC853G 1.00 1.09 1.44 2.14 3.31 2.06
1 8-1/2 5.00 MC654G MC654P MC854G 1.13 1.22 1.72 2.44 3.75 2.52
1-1/8 9-1/2 7.00 MC655G - MC855G 1.25 1.36 1.84 2.66 4.02 2.69
1-1/4 12 9.00 MC656G - MC856G 1.38 1.52 2.03 3.15 4.63 2.88
1-3/8 13-1/2 12.50 MC666G - MC866G 1.50 1.65 2.25 3.25 5.19 3.25
1-1/2 17 17.20 MC657G - MC857G 1.63 1.77 2.41 3.50 5.63 3.50
1-5/8 20 23.50 MC685G - MC885G 1.75 1.88 2.66 3.91 6.13 4.13
1-3/4 25 27.70 MC677G - MC877G 2.00 2.13 2.94 4.06 6.97 4.75
2 35 39.00 M658G M658P - 2.25 2.38 3.28 4.51 7.44 5.50
2-1/2 55 90.00 - - MC860G 2.75 2.91 4.13 6.25 10.48 6.75
3 85 138.00 - - MC862G 3.25 3.41 5.00 6.75 13.00 7.38
3-1/2 120 242.50 - - MC864G 3.75 3.91 5.50 8.50 15.00 9.00

42 | nelsonwirerope.com
 RIGGING HARDWARE
CM BLACK THEATRICAL SHACKLES
Screw Pin Anchor Shackles allow quick and easy removal of the screw pin and can be
useful in applications where the shackle is frequently removed, but not in applications
where the pin is subject to torque or twisting.

• Working Load Limits: 1/2 to 43 tons

• Size Diameter: 3/16" to 2"
• Surface Finish - Self colored, painted or galvanized per ASTM.
• Strength and Abrasion Features - All shackle bodies and pins are forged from special steel, heat
treated and tempered to give greater strength and abrasion resistance.
• Positive and Easy I.D. - All shackles are marked with size (mm and in.) and working load limit in tons.
• Strength Plus - Ultimate strength equals 5 times working load limit. Proof load equals 2.2 times
working load limit.
• CE Marked

Standard Size Working Weight Dimensions (in.)

Product Code
(in.) Load Limit (t) Each (lbs.)
P E W R L B min
3/16 1/2 0.06 M645B 0.25 0.29 0.38 0.57 0.88 0.58
1/4 3/4 0.12 M646B 0.31 0.36 0.47 0.75 1.13 0.75
5/16 1 0.20 M647B 0.38 0.45 0.53 0.84 1.25 0.81
3/8 1-1/2 0.30 M648B 0.44 0.52 0.66 1.00 1.40 1.00
7/16 2 0.50 M649B 0.50 0.58 0.72 1.15 1.69 1.19
1/2 3 0.75 M650B 0.63 0.70 0.84 1.34 1.94 1.38
5/8 4-1/2 1.30 M651B 0.75 0.83 1.06 1.66 2.41 1.63
3/4 6-1/2 2.30 M652B 0.88 0.95 1.28 1.94 2.84 1.89
7/8 8-1/2 3.50 M653B 1.00 1.09 1.44 2.14 3.31 2.06
1 10 5.00 M654B 1.13 1.22 1.72 2.44 3.75 2.52

CM LONG REACH SHACKLES

As one of the only manufacturers of long-reach
shackles, CM designed these shackles for use in
construction applications where a longer reach is
needed to attach to pick points.

• Design factor of 5:1

• Meets the requirements of ASME B30.26
• Alloy Steel
• WLL forged on body
• Offered in self-colored or durable orange powder
coated finish
• Do not point load. The load should be evenly
distributed over the entire pin to achieve full
working load limit.

Screw Pin Bolt, Nut & Cotter Pin

Size Working Dimensions (in.)
(in.) Load Limit (lbs) Self Weight Self Weight
Painted Painted
Colored Each (lbs) Colored Each (lbs) P D L W G
5/8 7,000 M7151 M7151P 1.80 M9151 M9151P 1.95 0.75 0.63 4.00 2.25 1.57
3/4 10,000 M7152 M7152P 2.72 M9152 M9152P 3.21 0.88 0.75 5.00 2.75 1.81
1 19,000 M7154 M7154P 5.86 M9154 M9154P 6.31 1.00 1.00 5.50 3.25 2.38
1-1/4 28,000 M7156 M7156P 11.90 M9156 M9156P 12.90 1.38 1.25 6.19 3.88 3.06
1-1/2 34,000 M7157 M7157P 19.60 M9157 M9157P 20.70 1.50 1.50 7.00 4.50 3.50
1-3/4 50,000 M7177 M7177P 30.70 M9177 M9177P 33.30 2.00 1.75 8.00 5.25 4.00

215.721.9333 | 43
SYNTHETIC SLING HARDWARE

S-280 SLING SAVER WEB CONNECTOR

• All Alloy construction.
• Durable vinyl cover that:
• Protects sling at eye
• Keeps sling positioned correctly on spool.
• Design Factor of 5 to 1.
• Makes a field assembled bridle quick and easy.
• No retaining pin to snag sling material.
• Increased radius of spool gives wider sling bearing surface resulting in an increase area for load distribution, thus:
• Increasing Synthetic Sling efficiency as compared to standard anchor and chain shackle bows and conventional
eye hooks. This allows 100% of the slings rated Working Load Limit to be achieved.
• Allowing better load distribution on internal fibers.
• Replacement kit for spool and web cover available.
• Designed for use with Type III (Eye & Eye), Class 7, 2 ply webbing & Synthetic Round Slings. Also accommodates
single ply and endless slings.

Web Slings
Round Sling Size Working Load Limit S-280 Weight Each
(Number) (Tons) Stock Number (lbs.)
Webbing Width (in.) Eye Width (in.) Ply

1&2 .65 .91 1.1 3-1/4 1021681 1.5

3 1.4 2.0 2.5 4-1/2 1021690 1.9
4 2.5 3.6 4.4 6-1/4 1021700 2.9
5&6 3.9 5.5 6.8 8-1/2 1021709 5.1

S-253 SCREW PIN SLING SHACKLE

• Shackles available in size 3-1/4 to 50 metric tons.
• All Alloy construction.
• Design factor of 5 to 1.
• Each shackle has a Product Identification Code (PIC) for material traceability along with a Working Load Limit and
the name Crosby forged into it.
• Increased radius of bow gives wider sling bearing surface resulting in an increased area for load distribution, thus:
• Increasing Synthetic Sling efficiency as compared to standard anchor and chain shackle bows and conventional
hooks. This allows 100% of the sling’s rated Working Load Limit to be achieved.
• Allows better load distribution on internal fibers.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and
temperature requirements. Importantly, these shackles meet other critical performance requirements including
fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Shackles available in both a Screw Pin and Bolt, Nut and Cotter Pin configuration.
• Bolt (Pin) has a larger diameter that provides better load distribution.
• Look for the Red Pin®... the mark of Genuine Crosby quality.

Round Sling Size Working Load Limit S-280 Weight Each

Web Sling Eye Width (in.)
(Number) (tons) Stock Number (lbs.)
1 1&2 3-1/4 1020575 1.4
1.5 3&4 6-1/2 1020584 2.2
2 5&6 8-3/4 1020593 3.8
3 7&8 12-1/2 1020602 7.3
4 9 & 10 20-/12 1020611 15.2
5 11 & 12 35 1020620 30.8
6 13 50 1020629 52.0

44 | nelsonwirerope.com
 SYNTHETIC SLING HARDWARE

SYNTHETIC ROUND SLING HOOKS

• Quickly attaches through the latch to both synthetic web and round slings
• Synthetic sling hook color coded matching round sling of the same color
• Field replaceable heavy duty steel latch
• Can be permanently attached or easily removed when not required
• Design factor of 5 to 1.

Working Load Weight

Part Number Color A B C D G H P T
Limit (lbs.) (lbs.)
CJ01T1 Purple 2,600 3.07 4.84 0.47 1.61 0.67 0.79 0.63 1.22 1.54
CJ02T2 Green 5,300 3.58 5.83 0.75 1.77 0.83 1.02 0.67 1.57 2.65
CJ03T3** Yellow 8,400 4.45 6.89 0.83 2.17 0.98 1.26 0.98 1.97 4.85
CJ05T3 Red 13,200 5.21 8.78 1.57 2.76 1.42 2.34 1.42 2.34 9.90
CJ08T8 Blue 21,200 7.28 12.48 1.97 3.94 1.77 2.48 2.17 3.15 27.50

** Also fits 2” 2-ply eye and eye or 2” 1-ply endless web slings

215.721.9333 | 45
RIGGING HARDWARE

L-320A EYE HOOK

All Crosby 320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist
hooks.
• Available in carbon steel and alloy steel.
• Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy Steel).
• Eye hooks are load rated.
• Proper design, careful forging and precision controlled quenched and tempering give maximum strength without
excessive weight and bulk.
• Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original
hook, latch assemblies can be added. (See pages 123 - 125)
• Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on
Cranes available. Certificates available when requested at time of order and may include additional charges.
• Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-
CHECK® features:
• Deformation Indicators and Angle Indicators (see following page for detailed definition).

The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks.
(Sizes 3/4 metric ton Carbon through 22 metric ton Alloy.)
• Metric Rated at 5:1 Design Factor for (Carbon Steel); 5:1 Design Factor for 1t - 22t (Alloy Steel).
• Can be proof tested to 2 times the Working Load Limit.
• Low profile hook tip.
• New integrated latch (S-4320) meets the world-class standard for lifting.
• Heavy duty stamped latch interlocks with the hook tip.
• High cycle, long life spring.
• When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and
1926.1501(g) for personnel hoisting.
• Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features.
• Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows
for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a
measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch
increment on the measuring device.
If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
• Angle Indicators -- Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also
provide the opportunity to approximate other included angles between two sling legs.

Working Replacement
Load Limit Eye Hook Type Latch Kits
(t)
Hook Weight
ID Alloy Each
Code Carbon Carbon (lbs.)
L-320A S-4320 PL SS-4055
Carbon Alloy L-320C G-320CN L-320AN Stock No. Stock No. Stock No.
L-320CN Galv. S.C.
S.C.
3/4 1 †D 1022205 1022208 1022380 .61 1096325 - -
1 1-1/2 †F 1022216 1022219 1022391 .89 1096374 - -
1-1/2 2 †G 1022227 1022230 1022402 1.44 1096421 - -
2 3 †H 1022238 1022241 1022413 2.07 1096468 - -
3 5 †I 1022246 1022249 1022424 4.30 1096515 1092000 -
5 7 †J 1022260 1022262 1022435 8.30 1096562 1092001 -
7-1/2 11 †K 1022271 1022274 1022446 15.00 1096609 1092002 -
10 15 †L 1022282 1022285 1022457 20.77 1096657 1092003 -
15 22 †N 1022293 1022296 1022468 39.50 1096704 1092004 -
20 30 O 1022302 - 1022479 60.00 - 1093716 1090161
25 37 P - - - 105.00 - 1093717 1090189
30 45 S - - - 148.00 - 1093718 1090189
40 60 T - - - 228.00 - 1093719 1090205

*Eye Hooks (3/4 TC - 22TA), Proof load is 2 times Working Load Limit. Eye Hooks (20 TC - 60TA). All carbon hooks-average straightening load (ultimate load) is 5 times Working
Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average
straightening load (ultimate load) is 4.5 times Working Load Limit. † New 320N style hook.
Copyright © 2016 The Crosby Group LLC All Rights Reserved

46 | nelsonwirerope.com
 RIGGING HARDWARE
N

O
O2
C
J

AA
K F
T2
T

Hook Dimensions
ID (in.)
Code* C D F G J K M N O† O2 †† Q T† T2 †† AA**
D 3.34 2.83 1.25 .73 .90 .63 .63 .36 .89 - .75 .87 - 1.50
F 3.81 3.11 1.38 .84 .93 .71 .71 .42 .91 - .91 .98 - 2.00
G 4.14 3.53 1.50 1.00 1.00 .88 .88 .55 1.00 - 1.13 1.03 - 2.00
H 4.69 3.97 1.63 1.13 1.13 .94 .94 .58 1.09 - 1.25 1.16 - 2.00
I 5.77 4.81 2.00 1.44 1.47 1.31 1.31 .72 1.36 1.00 1.56 1.53 1.50 2.50
J 7.37 6.27 2.50 1.81 1.75 1.66 1.66 .90 1.61 1.31 2.00 1.96 1.88 3.00
K 9.07 7.45 3.00 2.25 2.29 1.88 1.63 1.11 2.08 1.81 2.44 2.47 2.25 4.00
L 10.08 8.30 3.25 2.59 2.50 2.19 1.94 1.27 2.27 2.00 2.84 2.62 2.31 4.00
N 12.53 10.30 4.25 3.00 3.30 2.69 2.38 1.56 3.02 2.75 3.50 2.83 2.56 5.00
O 14.06 13.62 5.00 3.62 4.00 3.00 3.00 1.75 3.25 - 3.50 3.44 - 6.50
P 18.19 14.06 5.38 4.56 4.25 3.75 3.19 2.00 3.00 - 4.50 3.88 - 7.00
S 20.12 15.44 6.00 5.06 4.75 4.50 3.25 2.18 3.38 - 4.94 4.75 - 8.00
T 23.72 18.50 7.00 6.00 5.75 5.50 3.91 2.53 4.12 - 5.69 5.69 - 10.00

*Eye Hooks (3/4 TC-22TA), Proof load is 2 times Working Load Limit. Eye Hooks (20 TC-60TA). All carbon hooks - average straightening load (ultimate load) is 5 times Working
Load Limit. Alloy eye hooks 1t through 22t - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30t through 60t - average straightening
load (ultimate load) is 4.5 times Working Load Limit.
** Deformation Indicators.† 3/4tC - 22tA dimensions shown are for S-4320 Latch Kits. Dimensions for sizes 20t carbon and larger are for PL Latch Kits.
†† Dimensions are for PL-N latch kits.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 47
RIGGING HARDWARE

L-322AN SWIVEL HOOK

• Forged - Quenched and Tempered.
• Swivel hooks are load rated.
• Proper design, careful forging, and precision controlled quench and tempering gives maximum strength
without excessive weight and bulk.
• Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit.
• Hoist hooks incorporate markings forged into the product which address two (2)
QUIC-CHECK® features:
• Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on
the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed,
thus indicating abuse or overload.
• Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in
the hook. These indicators also provide the opportunity to approximate other included angles between two
sling legs.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules
1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of
order and may include additional charges.

Working Dimensions
Load Limit L-322 CN L-322 AN Weight (in.) Rep. Latch
(t)* Stock No. Stock No. Each Stock No.
(lbs.)
Carbon Alloy A B C D F G H J K L M O† R S AA**
3/4 1 1048603 1048807 .75 2.00 .82 1.25 2.86 1.25 .73 .81 .93 .63 5.66 .63 .89 4.55 .38 1.50 1096325
1 1-1/2 1048612 1048816 1.25 2.50 1.31 1.50 3.15 1.38 .84 .94 .97 .71 6.71 .71 .91 5.37 .50 2.00 1096374
1-1/2 2 1048621 1048825 2.25 3.00 1.50 1.75 3.59 1.50 1.00 1.16 1.06 .88 7.75 .88 1.00 6.12 .63 2.00 1096421
2 3 1048630 1048834 2.30 3.00 1.50 1.75 4.00 1.62 1.13 1.31 1.19 .94 8.25 .94 1.09 6.50 .63 2.00 1096468
3 5 1048639 1048840 4.96 3.50 1.64 2.00 4.84 2.00 1.44 1.63 1.50 1.31 9.69 1.13 1.36 7.50 .75 2.50 1096515
5 7 1048648 1048859 10.29 4.56 2.29 2.50 6.28 2.50 1.81 2.06 1.78 1.66 12.47 1.44 1.61 9.63 1.00 3.00 1096562
7-1/2 11 1048657 1048868 19.40 5.00 2.44 2.75 7.54 3.00 2.25 2.63 2.41 1.88 14.75 1.63 2.08 11.37 1.13 4.00 1096609
10 15 1048666 1048880 23.25 5.62 2.48 3.12 8.34 3.25 2.59 2.94 2.62 2.19 16.40 1.94 2.27 12.25 1.25 4.00 1096657
15 22 1048675 1048889 47.00 7.10 3.76 4.10 10.34 4.25 3.00 3.50 3.41 2.69 21.34 2.38 3.02 16.71 1.50 5.00 1096704
- 30 - - 70.50 7.10 3.76 4.10 13.62 5.00 3.61 4.63 4.00 3.00 23.25 3.00 3.25 18.01 1.50 6.50 1093716

* Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. Designed with a 5 to 1 safety factor. Alloy swivel hooks 1.25tA-31.5tA : proof load is 2.5 times working
load limit. Designed with a 4 to 1 safety factor. Alloy swivel hook 30tA: proof load is 2 times working load limit. Designed with a 4 to 1 design factor. ** Deformation Indicators †
Dimensions for hooks 3/4t carbon thru 22t alloy are for S-4320 latch kits. Dimensions for hooks 31.5t alloy are for PL latch kit.

S-3322B SWIVEL HOOKS WITH BEARING

• New anti-friction bearing design allows hook to rotate freely under load.
• Capacities ranging from 2 through 15 metric tonnes.
• Forged - Quenched and Tempered.
• Proper design, careful forging, and precision controlled quench and tempering gives maximum strength
without excessive weight and bulk.
• Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies
listed and shown on pages 121 - 123. Even years after purchase of the original hook, latch assemblies can be
added.

Working Dimensions
Hook S-3322B L-3322B Weight (in.) Rep.
Load ID Stock Stock Each Latch
Limit Code* No. No.† (lbs.) A B C D F G H J K L M O R S AA** Stock No.
(t)*
2 G 1028605 - 2.5 3.00 1.50 1.75 3.59 1.50 1.00 1.16 1.06 .88 7.64 .88 1.00 6.01 .63 2.00 1096421
3 H 1028614 1028618 3.8 3.50 1.56 2.00 4.00 1.62 1.13 1.31 1.19 .94 8.60 .94 1.09 6.72 .75 2.00 1096468
5 I 1028623 1028627 7.0 4.00 1.56 2.25 4.84 2.00 1.44 1.63 1.50 1.31 10.32 1.13 1.36 8.00 .88 2.50 1096515
7 J 1028632 - 14.0 5.00 1.94 2.75 6.27 2.50 1.81 2.06 1.78 1.66 12.84 1.44 1.61 9.90 1.13 3.00 1096562
11 K 1028641 - 22.3 5.62 2.05 3.12 7.54 3.00 2.25 2.63 2.41 1.88 15.24 1.63 2.08 11.74 1.25 4.00 1096609
15 L 1028650 - 36.0 7.12 3.62 4.10 8.33 3.25 2.59 2.94 2.62 2.19 18.64 1.94 2.27 14.41 1.50 4.00 1096657

Copyright © 2016 The Crosby Group LLC All Rights Reserved

48 | nelsonwirerope.com
 RIGGING HARDWARE

A-378 SORTING HOOK

• Forged Alloy Steel - Quenched and Tempered.
• Deep straight throat permits efficient handling of flat plates or large
cylindrical shapes.

Dimensions
(in.)
Working Load Limit Working Load Limit A-378 Weight
Style
at tip of Hook (Tons)* at bottom of Hook (Tons)* Stock No Each (lbs.) Opening Radius
I.D. Overall at top at bottom
of Eye Length of Hook of Hook
2 7-1/2 1028024 No Handle 6.42 1.38 9.69 2.81 .625
2 7-1/2 1028033 With Handle 6.42 1.38 9.69 2.81 .625
*Ultimate Load is 4 times the Working Load Limit.

A-350N SLIDING CHOKER HOOK

• New style incorporates throat opening equal to or larger than old style hooks.

• Each product has a Product Identification Code (PIC) for material traceability, along with a
Working Load Limit, and the name Crosby or “CG” forged into it.

• All hooks incorporate Crosby’s patented QUIC-CHECK® marks to help in determining if throat
opening dimension has changed.

• Each hook can be equipped with a Crosby S-4320 heavy duty stamped latch with the high
cycle, long life spring.

• Forged Alloy Steel -- Quenched and Tempered.

Single Part Eight Part A-350L Weight Dimensions (in.) Hook Replacement
A-350N
Rope Size Rope Size
Stock No. Stock Each Frame Latch Kit
(in.) (in.) No. (Ibs.) A B C D E F G H L P R AA** Code Stock No.
3/8 - 1011707 1011802 1.0 2.06 1.13 .63 2.41 .63 .38 .84 .91 4.28 2.59 .63 1.50 D 1096325
1/2 1/8 1011716 1011811 1.4 2.25 1.31 .75 2.97 .78 .50 .97 1.06 4.97 3.09 .75 1.50 F 1096374
† 5/8 - 1011725 1011820 3.0 3.06 1.63 .75 3.56 .94 .56 1.13 1.31 6.38 3.88 1.00 2.00 G 1096421
† 5/8 3/16 1011734 1011839 2.7 3.06 1.63 1.00 3.56 .94 .56 1.13 1.31 6.38 4.00 1.13 2.00 G 1096421
† 3/4 - 1011743 1011848 4.4 3.38 2.13 1.00 4.25 1.16 .63 1.44 1.63 7.66 4.58 1.13 2.50 H 1096468
† 3/4 1/4 1011752 1011857 3.8 3.38 2.13 1.44 4.25 1.16 .63 1.44 1.63 7.66 4.78 1.13 2.50 H 1096468
†† 7/8-1 - 1028177 1028177 9.70 4.41 2.12 1.25 6.06 1.41 .88 2.00 2.33 9.55 5.72 1.50 3.00 I 1096515

** Deformation Indicators. † Determine EYE diameter “C”, before ordering. †† 7/8-1” is Cast Steel & furnished with latch attached.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 49
RIGGING HARDWARE

BH-313 WELD-ON BUCKET HOOK

• Wide range of sizes available: 1-10 metric ton capacity.
• Forged Alloy Steel.
• Designed for attachment to mobile lifting equipment to provide a pick point
for easy sling attachment.
• Large weld pad.
• Heavy duty latch interlocks with the hook tip. Replacement latches available.
• Detailed installation and application instructions included with each hook.

Working Dimensions Replacement

BH-313 Weight Each (in)
Load Limit Latch
Stock No. (lbs.)
(t)* B E F G H J K S Stock No.
1 1029105 1.15 .91 3.82 2.80 1.42 1.06 1.02 4.21 .71 1092104
2 1029114 1.85 .91 3.23 3.58 1.42 .98 1.34 4.53 .83 1092104
3 1029123 2.60 1.14 4.61 4.13 1.42 1.22 1.42 5.16 .94 1092104
4 1029132 4.19 1.34 5.16 4.49 1.81 1.42 1.69 5.79 1.14 1092105
5 1029141 5.62 1.34 6.34 5.24 1.85 1.77 1.73 6.81 1.14 1092105
8 1029150 7.28 1.38 6.54 5.31 1.85 2.05 2.05 7.01 1.54 1092105
10 1029169 11.02 1.93 8..07 6.61 1.85 2.24 2.13 8.74 1.54 1092106

Plate Thickness Requirements

Minimum Minimum Minimum Minimum
Working Plate Fillet Size Plate Fillet Size
Load Limit Thickness All Around Thickness All Around
(t) (in.) (in.) (mm) (mm)
1 3/16 3/16 5 5
2 1/4 1/4 6 6
3 5/16 5/16 8 8
4 5/16 5/16 8 8 135˚

5 3/8 3/8 10 10 Figure 3 Figure 4 Figure 5

8 1/2 1/2 13 13 Figure 2 WRONG WRONG WRONG
10 1/2 1/2 13 13

Instructions for Assembling S-4313 Latch on BH-313 Weld-On Hook

1. Place hook flat on work surface as shown.

Hook Sizes 1 to 3 Tons
2A. Position coils of spring over hook cam, with legs of spring pointing towards hook tip and coil of spring
pitioned down as shown.
Hook Sizes 4 to 10 Tons
2B. Spread legs of spring and place into drilled hole. Position coils of spring over hook cam, with end of spring
pointing toward hook tip as shown.
3. Position latch over spring, aligning latch ears and spring coil. On pin hole side of latch, insert non-grooved end of latch
pin through hole in latch and through spring until contact is made with hook body (a small punch may be required for
proper alignment).
4. Align holes in latch with holes in cam of hook. Continue pushing the pin through hook, spring and latch.
5. Insert roll-pin into latch, driving it in with a hammer, while ensuring that latch pin groove is in alignment.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

50 | nelsonwirerope.com
 RIGGING HARDWARE

SS-4320 REPLACEMENT LATCH KITS

• Heavy duty stamped latch interlocks with the hook tip.
• High cycle, long life spring.
• Can be made into a “Positive Locking” Hook when proper cotter pin is
utilized.
• Latch kits shipped unassembled and individually packaged with
instructions.
• Meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g)(when
secured with the bolt, nut and pin) for lifting personnel.

Hook Size Weight Dimensions

(t) Hook ID S-4320 (in)
Each
Code Stock No.
Carbon Alloy Bronze (lbs.) B D E
3/4 1 .5 D 1096325 .03 .50 .15 1.44
1 1-1/2 .6 F 1096374 .04 .54 .17 1.56
1-1/2 2 1 G 1096421 .04 .63 .17 1.66
2 3 1.4 H 1096468 .06 .66 .17 1.91
3 5 2 I 1096515 .10 .83 .20 2.31
5 7 3.5 J 1096562 .15 1.04 .20 2.88
7-1/2 11 5 K 1096609 .28 1.25 .27 3.56
10 15 6.5 L 1096657 .33 1.35 .27 3.81
15 22 10 N 1096704 .84 1.66 .39 5.18

SS-4055 REPLACEMENT LATCH KITS

• Stainless steel construction with cadmium plated steel nuts.
• Shipped packaged and unassembled.
• Instructions included for easy field assembly.

Hook Size Hook Weight Dimensions

(t) SS-4055 (in.)
ID Each
Stock No.
Carbon Alloy Bronze Code (lbs.) A B C D
3/4 1 .5 D 1090027 .02 .38 .16 1.44 .59
1 1-1/2 .6 F 1090045 .02 .38 .16 1.60 .59
1-1/2 - 2 2-3 1.0 - 1.4 G/H 1090063 .03 .47 .19 1.84 .82
3 4-1/2 2.0 I 1090081 .06 .56 .17 2.41 1.00
5 7 3.5 J 1090107 .11 .58 .20 2.97 1.21
7-1/2 - 10 11 - 15 5.0 - 6.5 K/L 1090125 .17 .59 .27 3.66 1.50
15 22 10.0 N 1090143 .39 .83 .39 4.94 1.90
20 30 -- O 1090161 .63 .94 .52 5.88 2.56
25 - 30 37 - 45 -- P/S 1090189 1.12 2.19 .39 6.50 3.84
40 60 -- T 1090205 1.77 3.31 .52 7.88 4.12

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 51
RIGGING HARDWARE

S-1316 EYE SHUR-LOC HOOK

• All SHUR-LOC® hooks have the following features:
• Forged Alloy Steel - Quenched and Tempered.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive Lock Latch is Self-Locking when hook is loaded.
• The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications
and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).

• Eye Style incorporates these added features:

• Individually Proof Tested to 2-1/2 times the 4:1 Working Load Limit with certification.
• S-1316 meets the performance requirements of EN1677-3:2001
• 25% stronger than Grade 80.
• Suitable for use with Grade 100 and Grade 80 chain.
• Designed with “Engineered Flat” to connect to S-1325 chain coupler.
• Fatigue Rated

Grade 100
Chain Alloy Chain Working Load Dimensions
Size Working Limit Weight (in.)
Frame Load Limit (lbs.) S-1316 Each
(in.) (mm) code (lbs.)* 4:1 5:1 Stock No. (lbs.) A C D E F H J L AA**
- 6 D 3200 2560 1022896 .85 .78 3.95 .79 2.60 .67 .31 .63 1.14 1.50
1/4-5/16 7-8 G 5700 4560 1022914 1.80 1.08 5.31 1.10 3.50 .87 .39 .81 1.48 2.00
3/8 10 H 8800 7040 1022923 3.40 1.30 6.57 1.17 4.39 1.10 .51 .94 1.83 2.50
1/2 13 I 15000 12000 1022932 6.00 1.65 8.23 1.67 5.45 1.26 .67 1.16 2.22 3.00
5/8 16 J 22600 18000 1022941 15.1 2.20 10.06 2.04 6.56 1.50 .87 1.50 2.65 3.50
3/4 18-20 - 35300 28240 1022942 19.0 2.60 10.77 2.22 7.76 2.01 .87 2.03 3.52 5.00
7/8 22 - 42700 34160 1022943 28.0 2.87 12.49 2.45 8.75 2.27 .98 2.20 3.83 6.00
1 26 - 59700 47,760 1022944 49.5 3.15 14.60 3.21 9.87 2.46 1.26 2.68 4.09 6.50

S-1318A SHUR-LOC SHANK HOOK

• All SHUR-LOC® hooks have the following features:
• Forged Alloy Steel - Quenched and Tempered.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive Lock Latch is Self-Locking when hook is loaded.
• The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications
and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).

Chain Grade 100 Dimensions

Size Alloy Chain (in.)
S-1318A Frame Working Load Limit Weight Each
(in.) (mm) Stock No. code (lbs.) A† B C D E F G J L AA** (lbs.)
- 6 1098200 D 3200 .79 2.16 3.31 .79 2.60 .67 6.26 .63 1.16 1.50 1.00
1/4-5/16 7-8 1098209 G 5700 1.00 2.40 4.16 1.10 3.51 .87 7.66 .81 1.48 2.00 1.99
3/8 10 1098218 H 8800 1.14 2.95 5.14 1.17 4.39 1.10 9.26 .94 1.83 2.50 3.56
1/2 13 1098227 I 15000 1.34 3.35 6.31 1.67 5.49 1.26 11.33 1.16 2.22 3.00 7.00

* Ultimate Load is 4 times the Working Load Limit based on Grade 100 chain. ** Deformation Indicators. † Dimension before machining (as forged).

Copyright © 2016 The Crosby Group LLC All Rights Reserved

52 | nelsonwirerope.com
 RIGGING HARDWARE

S-1326 SWIVEL HOOK

• Forged Alloy Steel - Quenched and Tempered.
• Individually Proof Tested at 2-1/2 times the 4:1 Working Load Limit with certification.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive Lock Latch is Self-Locking when hook is loaded.
• Rated for both Wire Rope and use with Grade 80/100 Chain.
• G-414 Heavy Thimble should be used with wire rope slings.
• Trigger Repair Kit available (S-4316). Consists of spring, roll pin and trigger.
• S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under
load.
• Fatigue rated.
• The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications
and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
• "Look for the Platinum Color – Crosby Grade 100 Alloy Products."

Grade 100
Chain Working Load Dimensions
Alloy Chain Weight
Size Frame Limit S-1326 (in.)
Working Each
code (lbs.) Stock No.
Load Limit (lbs.)
(in.) (mm) 5:1 A C D E F H J L AA**
(lbs.)* 4:1
- 6 D 3200 2560 1004304 1.26 1.50 1.32 .79 2.60 .67 .50 .63 1.13 1.50
1/4 - 5/16 7-8 G 5700 4560 1004313 2.62 1.75 1.59 1.10 3.50 .87 .63 .81 1.38 2.00
3/8 10 H 8800 7040 1004322 4.70 2.00 1.73 1.17 4.39 1.10 .75 .94 1.75 2.50
1/2 13 I 15000 12000 1004331 8.64 2.50 2.38 1.67 5.45 1.26 1.00 1.16 2.11 3.00
5/8 16 - 22600 18000 1004340 17.00 2.75 2.70 2.05 6.56 1.50 1.13 1.50 2.49 3.50
3/4 18 - 20 - 35300 28240 1004349 24.00 2.83 2.52 2.22 7.76 2.01 1.10 2.03 3.52 5.00
7/8 22 - 42700 34160 1004358 29.00 3.44 3.19 2.45 8.75 2.26 1.30 2.20 3.83 6.00

S-13326 SHUR-LOC SWIVEL HOOK WITH BEARING

• Forged Alloy Steel - Quenched and Tempered.
• Individually Proof Tested at 2-1/2 times the 4:1 Working Load Limit with certification.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive Lock Latch is Self-Locking when hook is loaded.
• Rated for both Wire Rope and use with Grade 80/100 Chain.
• G-414 Heavy Thimble should be used with wire rope slings.
• Trigger Repair Kit available (S-4316). Consists of spring, roll pin and trigger.
• S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under
load.
• Fatigue rated.
• The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications
and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
• "Look for the Platinum Color – Crosby Grade 100 Alloy Products."

Grade 100
Chain Alloy Chain Dimensions
Size Working Working Load (in)
Load Limit Limit S-13326 Weight
Frame (lbs.) (lbs.) Stock Each
(in.) (mm) code 4:1* 5:1* No. (lbs.) A B C D E F H J L AA**
- 6 D 3200 2560 1004404 1.50 1.50 1.14 6.17 .79 2.60 .67 .50 .63 1.13 1.50
1/4 - 5/16 7-8 G 5700 4560 1004413 3.10 1.75 1.52 7.54 1.10 3.50 .87 .63 .81 1.44 2.00
3/8 10 H 8800 7040 1004422 5.26 2.00 1.61 8.88 1.16 4.35 1.10 .75 .94 1.83 2.50
1/2 13 I 15000 12000 1004431 11.22 2.50 2.03 11.11 1.66 5.45 1.26 1.00 1.16 2.19 3.00
5/8 16 - 22600 18000 1004440 17.32 2.75 2.25 12.90 2.05 6.56 1.50 1.13 1.50 2.61 3.50

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 53
RIGGING HARDWARE

MCKISSICK LIGHT CHAMPION SNATCH BLOCKS

• Forged alloy heat treated hooks.
• Forged steel swivel tees, yokes and shackles.
418 419
With • Can be furnished with bronze bushings or roller bearings.
With
Hook • Opening feature permits insertion of rope while block is
Shackle suspended from gin-pole.
• 3” thru 18” 418 and 419 blocks have exclusive bolt-retaining spring to
assure no lost bolts.
• Can be furnished with S-4320 hook latch.
• Pressure lube fittings.
• 3” - 10” feature dual rated Wireline sheaves.

• Fatigue rated.
• 4-1/2” and larger are RFID EQUIPPED.
404 • Meets or exceeds all requirements of ASME B30.26 including
Tail identification, ductility, design factor, proof load and temperature
Board requirements. Importantly, these blocks meet other critical
performance requirements including fatigue life and material
traceability, not addressed by ASME B30.26.

NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and Wireline size.
NOTE: Tail Board does not contain the spool that is required with the hook (418) and shackle (419) snatch blocks.

Stock No. Weight Each (lbs.)

Wire Working
Sheave Diameter Bearing 418 with 419 with 404 Tail Rope Size Load Limit 418 with 419 with 404 Tail Rep. Sheave Rep. Latch
(in.) Code Hook Shackle Board (in.) ‡ (t)* Hook Shackle Board Stock No. Stock No.
** 3 BB - 109091 - 5/16 - 3/8 2 - 4 - 460147 -
** 3 BB 108038 109037 † 102016 5/16 - 3/8 2 5 4 3 460147 1096421
**4-1/2 BB 108065 109064 102025 3/8 - 1/2 4 12 12 7 2000232 1096468
6 BB 108127 109126 102098 5/8 - 3/4 8 27 28 15 460815 1096562
6 RB 108154 109153 102114 5/8 - 3/4 8 27 28 15 472688 1096562
8 BB 108225 109224 102169 5/8 - 3/4 8 33 34 21 461164 1096562
8 RB 108252 109251 102187 5/8 - 3/4 8 33 34 21 473277 1096562
10 BB 108323 109322 102230 5/8 - 3/4 8 41 42 29 461805 1096562
10 RB 108350 109359 102258 5/8 - 3/4 8 41 42 29 473776 1096562
12 BB 169169 202961 178890 5/8 8 48 49 36 462270 1096562
12 RB 199911 169347 178934 5/8 8 48 49 36 474141 1096562
12 BB 108421 109420 102301 3/4 8 48 49 36 462289 1096562
12 RB 108458 109457 102329 3/4 8 48 49 36 474150 1096562
14 BB 194920 169356 - 5/8 8 55 56 - 463625 1096562
14 RB 199948 167857 - 5/8 8 55 56 - 474766 1096562
14 BB 108528 109527 - 3/4 8 55 56 - 463634 1096562
14 RB 108546 109545 - 3/4 8 55 56 - 474775 1096562
16 BB 199975 203041 - 3/4 15 130 135 - 4100056 1096609
16 RB 200008 203087 - 3/4 15 130 135 - 4200028 1096609
16 BB 108608 109607 - 7/8 15 130 135 - 4100065 1096609
16 RB 108626 109625 - 7/8 15 130 135 - 4200037 1096609
18 BB 200099 203130 - 7/8 15 150 155 - 464571 1096609
18 RB 200151 203176 - 7/8 15 150 155 - 475792 1096609
18 BB 108644 109643 - 1 15 150 155 - 4104640 1096609
18 RB 108662 109661 - 1 15 150 155 - 6000000 1096609
* Ultimate Load is 4 times the Working Load Limit. ** Available in Bronze Bushed only. 3” and 4-1/2” have self lubricating Bronze Bushing. † Fitted with 1-1/4” ID Swivel Eye. ‡
May be furnished in other rope sizes.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

54 | nelsonwirerope.com
 RIGGING HARDWARE

A-342 ALLOY MASTER LINKS

• Alloy Steel — Quenched and Tempered.
• Individually Proof Tested to values shown, with certification.
• Proof Tested with 60% inside width special fixtures sized to prevent localized point loading
per ASME A-952 , reference page 276.
• Forgings have a Product Identification Code (PIC) for material traceability, along with the
size, the name Crosby and USA in raised lettering.
• Selected sizes designated with “W” in the size column have enlarged inside dimensions to
allow additional room for sling hardware and crane hook.
• Crosby 1 ¼” to 2” 342/345 master links are type approved to DNV Certification Notes 2.7-1-
Offshore Containers. These Crosby master links are 100% proof tested, MPI and impact
tested. The tests are conducted by Crosby and 3.1 test certification is available upon
request. Refer to page 164 for Crosby COLD TUFF® master links that meet the additional
requirements of DNV rules for certification of lifting appliances - Loose Gear.
• Incorporates patented QUIC-CHECK® deformation indicators.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design
factor, proof load and temperature requirements. Importantly, these links meet other critical
performance requirements including fatigue life, impact properties and material traceability,
not addressed by ASME B30.26.

Size Dimensions (in.)

A-342 Weight Each Working Load Proof Load
(in.) (mm) Stock No (lbs.) Limit (lbs.)* (lbs.)** A B C Deformation Indicator
1/2W 13W 1014266 1.3 7400 17200 .62 2.80 5.00 3.50
5/8 16 1014280 1.5 9000 18000 .62 3.00 6.00 3.50
3/4W 19W 1014285 2.0 12300 28400 .73 3.20 6.00 4.00
7/8W 22W 1014319 3.3 15200 35200 .88 3.75 6.38 4.50
1W 26W 1014331 6.1 26000 60000 1.10 4.30 7.50 5.50
1-1/4W 32W 1014348 12.0 39100 90400 1.33 5.50 9.50 7.00
† 1-1/4W † 32W 1262505 9.2 † 36200 90500 1.25 4.38 8.75 5.50
1-1/2W 38W 1014365 18.6 † 61100 141200 1.61 5.90 10.50 6.50
† 1-1/2W † 38W 1262514 15.9 54300 135750 1.50 5.25 10.50 7.50
1-3/4 44 1014388 25.2 84900 212250 1.75 6.00 12.00 7.50
† 1-3/4 † 44 1262523 24.8 † 84900 212250 1.75 6.00 12.00 7.50
2 51 1014404 37.0 102600 256500 2.00 7.00 14.00 9.00
†2 † 51 1262532 37.7 † 102600 256500 2.00 7.00 14.00 9.00
2-1/4 57 1014422 54.1 143100 289200 2.25 8.00 16.00 10.00
2-1/2 63 1014468 68.5 160000 320000 2.50 8.38 16.00 11.00
2-3/4 70 1014440 94.0 216900 433800 2.75 9.88 18.00 12.50
3 76 1014486 115 228000 456000 3.00 9.88 18.00 13.00
3-1/4 83 1014501 145 262200 524400 3.25 10.00 20.00 13.50
3-1/2 89 1014529 200 279000 558000 3.50 12.00 24.00 15.50
3-3/4 95 1015051 198 336000 672000 3.75 10.00 20.00 13.50
4 102 1015060 264 373000 746000 4.00 12.00 24.00 16.00
†† 4-1/4 †† 108 1015067 302 354000 708000 4.25 12.00 24.00 -
†† 4-1/2 †† 114 1015079 345 360000 720000 4.50 14.00 28.00 -
†† 4-3/4 †† 121 1015088 436 389000 778000 4.75 14.00 28.00 -
†† 5 †† 127 1015094 516 395000 790000 5.00 15.00 30.00 -

*Ultimate Load is 5 times the Working Load Limit. Based on single leg sling (in-line load), or resultant load on multiple legs with an included angle less than or equal
to 120 degrees. Applications with wire rope and synthetic sling generally require a design factor of 5. **Proof Test Load equals or exceeds the requirement of ASTM
A952(8.1) and ASME B30.9. †Ultimate Load is 4 times the Working Load Limit for Offshore Container Master LInks. †Offshore Container Master Links Proof Tested to 2.5
times the Working Load Limit with 70 percent fixtures.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 55
RIGGING HARDWARE

G-291 REGULAR NUT EYE BOLTS

• Forged Steel - Quenched and Tempered.

• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.

• All Bolts Hot Dip galvanized after threading (UNC).

• Furnished with standard Hot Dip galvanized hex nuts.

• Recommended for in-line pull.

• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof
load and temperature requirements. Importantly, these bolts meet other critical performance requirements
including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Shank Dia. & Working Weight Dimensions

G-291 (in.)
Length Load Limit Per 100
Stock No.
(in.) (lbs.)* (lbs.) A B C D E F G H
3/8 x 4-1/2 1043338 1550 29.50 .38 .75 1.50 .38 2.50 4.50 6.12 .88
1/2 x 3-1/4 1043374 2600 50.30 .50 1.00 2.00 .50 1.50 3.25 5.38 1.12
1/2 x 6 1043392 2600 66.10 .50 1.00 2.00 .50 3.00 6.00 8.12 1.12
1/2 x 8 1043418 2600 82.00 .50 1.00 2.00 .50 3.00 8.00 10.12 1.12
1/2 x 10 1043436 2600 88.00 .50 1.00 2.00 .50 3.00 10.00 12.12 1.12
1/2 x 12 1043454 2600 114.20 .50 1.00 2.00 .50 3.00 12.00 14.12 1.12
5/8 x 4 1043472 5200 103.10 .62 1.25 2.50 .62 2.00 4.00 6.69 1.44
5/8 x 6 1043490 5200 118.20 .62 1.25 2.50 .62 3.00 6.00 8.69 1.44
5/8 x 8 1043515 5200 135.10 .62 1.25 2.50 .62 3.00 8.00 10.69 1.44
5/8 x 10 1043533 5200 153.60 .62 1.25 2.50 .62 3.00 10.00 12.69 1.44
5/8 x 12 1043551 5200 167.10 .62 1.25 2.50 .62 4.00 12.00 14.69 1.44
3/4 x 4-1/2 1043579 7200 168.60 .75 1.50 3.00 .75 2.00 4.50 7.69 1.69
3/4 x 6 1043597 7200 184.50 .75 1.50 3.00 .75 3.00 6.00 9.19 1.69
3/4 x 8 1043613 7200 207.90 .75 1.50 3.00 .75 3.00 8.00 11.19 1.69
3/4 x 10 1043631 7200 235.00 .75 1.50 3.00 .75 3.00 10.00 13.19 1.69
3/4 x 12 1043659 7200 257.50 .75 1.50 3.00 .75 4.00 12.00 15.19 1.69
3/4 x 15 1043677 7200 298.00 .75 1.50 3.00 .75 5.00 15.00 18.19 1.69
7/8 x 5 1043695 10600 270.00 .88 1.75 3.50 .88 2.50 5.00 8.75 2.00
7/8 x 8 1043711 10600 308.00 .88 1.75 3.50 .88 4.00 8.00 11.75 2.00
7/8 x 12 1043739 10600 400.00 .88 1.75 3.50 .88 4.00 12.00 15.75 2.00
1x6 1043757 13300 421.00 1.00 2.00 4.00 1.00 3.00 6.00 10.31 2.31
1x9 1043775 13300 468.50 1.00 2.00 4.00 1.00 4.00 9.00 13.31 2.31
1 x 12 1043793 13300 540.00 1.00 2.00 4.00 1.00 4.00 12.00 16.31 2.31
1 x 18 1043819 13300 650.00 1.00 2.00 4.00 1.00 7.00 18.00 22.31 2.31
1-1/4 x 8 1043837 21000 750.00 1.25 2.50 5.00 1.25 4.00 8.00 13.38 2.88
1-1/4 x 12 1043855 21000 900.00 1.25 2.50 5.00 1.25 4.00 12.00 17.38 2.88
1-1/4 x 20 1043873 21000 1210.00 1.25 2.50 5.00 1.25 6.00 20.00 25.38 2.88

*Ultimate Load is 5 times the Working Load Limit. Working Load Limit shown is for in-line pull. Maximum Proof Load is 2 times the
Working Load Limit.

Copyright © 2016 The Crosby Group LLC All Rights Reserved

56 | nelsonwirerope.com
 RIGGING HARDWARE

G-277 SHOULDER NUT EYE BOLTS

• Forged Steel - Quenched and Tempered.
• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
• Working Load Limits shown are for in-line pull. For angle loading, see page 200.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor,
proof load and temperature requirements. Importantly, these bolts
meet other critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26.
• All Bolts Hot Dip galvanized after threading (UNC).
• Furnished with standard Hot Dip galvanized, heavy hex nuts.

Shank Diameter Working Load Weight

G-277 Dimensions (in.)
& Length Limit Per 100
Stock No.
(in.) (lbs.)* (lbs.) A B C D E F G H J
3/8 x 4-1/2 1045112 1550 25.30 .38 .75 1.38 .31 2.50 4.50 5.97 .78 .66
1/2 x 3-1/4 1045130 2600 42.60 .50 1.00 1.75 .38 1.50 3.25 5.12 1.00 .91
1/2 x 6 1045158 2600 56.80 .50 1.00 1.75 .38 3.00 6.00 7.88 1.00 .91
5/8 x 4 1045176 5200 68.60 .62 1.25 2.25 .50 2.00 4.00 6.44 1.31 1.12
5/8 x 6 1045194 5200 102.40 .62 1.25 2.25 .50 3.00 6.00 8.44 1.31 1.12
3/4 x 4-1/2 1045210 7200 144.50 .75 1.50 2.75 .62 2.00 4.50 7.44 1.56 1.38
3/4 x 6 1045238 7200 167.50 .75 1.50 2.75 .62 3.00 6.00 8.94 1.56 1.38
7/8 x 5 1045256 10600 225.00 .88 1.75 3.25 .75 2.50 5.00 8.46 1.84 1.56
1x6 1045292 13300 366.30 1.00 2.00 3.75 .88 3.00 6.00 9.97 2.09 1.81
1x9 1045318 13300 422.50 1.00 2.00 3.75 .88 4.00 9.00 12.97 2.09 1.81
1-1/4 x 8 1045336 21000 650.00 1.25 2.50 4.50 1.00 4.00 8.00 12.72 2.47 2.28
1-1/4 x 12 1045354 21000 795.00 1.25 2.50 4.50 1.00 4.00 12.00 16.72 2.47 2.28
1-1/2 x 15 1045372 24000 1425.00 1.50 3.00 5.50 1.25 6.00 15.00 20.75 3.00 2.75

C
G
S-279 UNC SHOULDER TYPE MACHINERY EYE BOLTS F
D

• Forged Steel - Quenched & Tempered.

• Working Load Limits shown are for in-line pull. For angle loading, see page 200.
• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
• Recommended for in-line pull. E H
• S-279 threaded UNC.
• M-279 metric threaded.
B
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design
factor, proof load and temperature requirements. Importantly, these bolts meet other critical
performance requirements including fatigue life, impact properties and material traceability, A
not addressed by ASME B30.26.

Working Load Weight Dimensions (in.)

Size S-279 Limit Per 100
(in.) Stock No. A**
(lbs.)* (lbs.) B C D E F G H
Thread
1/4 x 1 9900182 650 5.00 1/4 - 20 1.02 1.13 .75 2.29 .19 .53 .77
5/16 x 1-1/8 9900191 1200 9.00 5/16 - 18 1.15 1.38 .88 2.74 .25 .59 .95
3/8 x 1-1/4 9900208 1550 15.00 3/8 - 16 1.27 1.62 1.00 3.07 .31 .69 1.05
1/2 x 1-1/2 9900217 2600 28.00 1/2 - 13 1.53 1.95 1.19 3.70 .38 .91 1.27
5/8 x 1-3/4 9900226 5200 55.00 5/8 - 11 1.79 2.38 1.38 4.45 .50 1.13 1.53
3/4 x 2 9900235 7200 96.00 3/4 - 10 2.05 2.76 1.50 5.07 .63 1.38 1.71
7/8 x 2-1/4 9900244 10600 154.00 7/8 - 9 2.31 3.25 1.75 5.87 .75 1.56 2.00
1 x 2-1/2 9900253 13300 238.00 1-8 2.57 3.76 2.00 6.66 .88 1.81 2.30
1-1/8 x 2-3/4 9900257 15000 320.00 1-1/8 - 7 2.75 4.19 2.25 7.20 .97 2.06 2.35
1-1/4 x 3 9900262 21000 399.00 1-1/4 - 7 3.09 4.50 2.50 7.95 1.00 2.28 2.73
1-1/2 x 3-1/2 9900271 24000 720.00 1-1/2 - 6 3.60 5.50 3.00 9.49 1.25 2.75 3.28
1-3/4 x 3-3/4 9900280 34000 1040.00 1-3/4 - 5 3.75 6.26 3.50 10.48 1.38 3.00 3.60
2x4 9900289 42000 1880.00 2 - 4-1/2 4.00 7.62 4.00 12.31 1.81 3.38 4.50
2-1/2 x 5 9900298 65000 3250.00 2-1/2 - 4 5.00 8.76 4.50 14.88 2.12 4.25 5.50
Copyright © 2016 The Crosby Group LLC All Rights Reserved

215.721.9333 | 57
RIGGING HARDWARE

MALLEABLE CLIPS Aluminum

This design of wire rope clip is available to OVAL SLEEVES
handle wire rope or strand sizes ranging Copper
from 1/16" - 1-1/8". Malleable wire rope clips • Grade 100
are used in light duty & general purpose • Forged Alloy Steel
applications while drop forged wire rope • Individually Proof Tested
clips are recommended for overhead lifting
applications. Each malleable wire rope clip is
zinc plated according to federal specification
FF-C-450 D, TYPE 1, CLASS 2. Aluminum Oval Sleeves Copper Oval Sleeves
Stock Rope Diameter Stock Rope Diameter
Number in Inches Number in Inches
Stock Size Minimum Torque Turnback length
Number in Inches Clips Required in Pounds in Inches 350-20 1/16 350-100 1/16

400-2240 1/16 3 2 3 350-30 3/32 350-110 3/32

400-2250 1/8 3 3 4 3/4 350-40 1/8 350-120 1/8

400-2260 3/16 3 4.5 5 1/2 350-50 5/32 350-125 5/32

400-2270 1/4 3 15 7 350-60 3/16 350-130 3/16

400-2280 5/16 3 15 7 3/4

400-2290 3/8 3 30 9 1/2
400-2300 7/16 4 40 10 1/4
400-2310 1/2 4 45 15 1/4 CABLE CUTTER
400-2320 9/16 4 50 16
• Plastic coated handles afford a firm,
400-2330 5/8 4 75 16 comfortable grip
400-2340 3/4 5 75 22 1/4 • Length of cutting blades will allow user
to “capture” cable or wire in cutting
400-2350 7/8 5 130 23 1/2 motion
• Softer spring allows easy closure of the
400-2360 1 6 130 31 tool, vastly reducing repetitive motion
400-2370 1 1/8 7 200 39 1/2 stress
• Length: 7.5 in./ 190mm
• Weight: 9.05 oz / 270g

Stock Number Maximum Cable Size Designed to Cut

350-140 3/16”
HEAVY DUTY THIMBLES
• Available in sizes from 1/4”- 1 1/8”
• Hot dipped galvanized
• meet the requirements of Federal
Specification FF-276b, Type III.

HAND SWAGERS
Stock Size
Number in Inches • For copper and aluminium
400-310 1/4 sleeves only
• Heavy duty metal construction
400-320 5/16 • Smooth rubber hand grips for
comfort in use
400-330 3/8
400-340 7/16
400-350 1/2
400-370 5/8
400-380 3/4
400-390 7/8 Stock Number Cable Size Designed to Swage

400-400 1 350-170 3/64”

400-410 1 1/8 350-180 1/16”

350-210 1/16”-3/16”

58 | nelsonwirerope.com
 RIGGING HARDWARE
GALVANIZED TURNBUCKLES
Hot Dip Galvanized & Drop Forged

Approximate Weight each in Pounds Working Load Limit in Pounds

Size Average Overall Length
(Diameter x Take up) Eye & Eye with Ends in Closed
Approx. Weight Eyes and/or Hook & Hook
in Inches Jaw & Eye Jaw & Eye Position
Each in Pounds Hooks Hook & Eye Jaw & Jaw
1/4 x 4 .3 .3 .4 400 500 8.25
5/16 x 4 1/2 .5 .53 .58 700 800 9.56
3/8 x 6 .75 .82 .93 1,000 1,200 11.88
1/2 x 6 1.50 1.62 1.68 1,500 2,200 13.31
1/2 x 9 1.75 1.82 1.85 1,500 2,200 16.31

1/2 x 12 2.18 2.19 2.20 1,500 2,200 19.31

5/8 x 6 2.63 2.69 2.82 2,250 3,500 15.50

5/8 x 9 3.00 3.01 3.25 2,250 3,500 18.50
5/8 x 12 3.25 3.50 3.75 2,250 3,500 21.50

3/4 x 6 3.75 4.25 4.68 3,000 5,200 17.00

3/4 x 9 4.50 5.00 5.38 3,000 5,200 20.00
3/4 x 12 5.75 5.75 6.12 3,000 5,200 23.00
3/4 x 18 7.00 7.25 7.75 3,000 5,200 29.00
7/8 x 12 8.38 8.88 9.38 4,000 7,200 24.63
7/8 x 18 10.25 10.60 11.44 4,000 7,200 30.63
1x6 10.75 11.10 11.80 5,000 10,000 20.63
1 x 12 11.25 12 12.88 5,000 10,000 26.63
1 x 18 14 14.75 16.1 5,000 10,000 32.63
1 x 24 17 17.75 18.6 5,000 10,000 39.63
1 1/4 x 12 19 21.2 23.6 5,000 15,200 29.88
1 1/4 x 18 24.1 26.0 26.6 5,000 15,200 35.88
1 1/4 x 24 25 28.7 31.2 5,000 15,200 41.88
1 1/2 x 12 27 31.1 35.5 7,500 21,400 32.88
1 1/2 x 18 31.2 36.4 40.7 7,500 21,400 38.88
1 1/2 x 24 38.2 44.2 47.63 7,500 21,400 44.38
1 3/4 x 18 53 57.5 62 -- 28,000 41.38
1 3/4 x 24 58 60 64 -- 28,000 47.75
2 x 24 90 102 115 -- 37,000 51.75
2 1/2 x 24 163 180 200 -- 60,000 58.50
2 3/4 x 24 180 214 248 -- 75,000 61.50

215.721.9333 | 59
STAINLESS STEEL

STAINLESS STEEL AIRCRAFT CABLE

TYPE 304

This cable features a 7x19 construction

and is available in diameters ranging This cable features a 7x7 construction and is
from 3/32" to 3/8". Custom spools are available in diameters ranging from 1/16" to 1/4".
offered, as well as, bulk spools of 5,000 Custom spools are offered, as well as, bulk
feet. The wire rope is made from grade spools of 5,000 feet. The wire rope is made from
304 stainless steel for optimal corrosion grade 304 stainless steel for optimal corrosion
resistance and durability. resistance and durability.

7x19 Construction 7x7 Construction

Stock Rope Diameter Approximate Weight Nominal Breaking Stock Rope Diameter Approximate Weight Nominal Breaking
No. in Inches Per 1000 Foot in Pounds Strength in No. in Inches Per 1000 Foot in Pounds Strength in Pounds
Pounds
300-170 1/16 7.5 480
300-200 3/32 17.4 920
300-180 3/32 16 920
300-210 1/8 29 1,760
300-190 1/8 28.5 1,700
300-220 5/32 45 2,400
- 5/32 43 2,400
300-230 3/16 65 3,700
- 3/16 62 3,700
300-240 1/4 110 6,400
- 1/4 106 6,400
300-250 5/16 173 9,000

300-260 3/8 243 12,000

STAINLESS STEEL AIRCRAFT CABLE

TYPE 316

This cable features a 7x19 construction

This cable features a 7x7 construction and is
and is available in diameters ranging from
available in diameters ranging from 1/16" to 1/4".
1/8”" to 3/8". Custom spools are offered,
Custom spools are offered, as well as, bulk
as well as, bulk spools of 5,000 feet. The
spools of 5,000 feet. The wire rope is made from
wire rope is made from grade 316 stainless
grade 316 stainless steel for maximum corrosion
steel for maximum corrosion resistance and
resistance and durability.
durability.

7x19 Construction 7x7 Construction

Stock Rope Diameter Approximate Weight Nominal Breaking Stock Rope Diameter Approximate Weight Nominal Breaking
Number in Inches Per 1000 Foot in Pounds Strength in Pounds Number in Inches Per 100 Foot in Pounds Strength in Pounds
300-215 1/8 29 1,300 300-175 1/16 1.00 360

300-235 3/16 65 2,900 300-185 3/32 2.00 700

300-245 1/4 110 4,900 300-195 1/8 3.00 1,360

300-255 5/16 173 7,600 - 5/32 4.00 2,200

300-265 3/8 243 11,000 - 3/16 6.00 3,100

- 1/4 11.00 5,200

60 | nelsonwirerope.com
 STAINLESS STEEL

STAINLESS STEEL THIMBLES 316 STAINLESS STEEL CHAIN

Available in sizes ranging from 1/8" to
The most commonly used chain for marine
5/8" to ensure a perfect fit for every
applications. This chain complies fully with all
project. This thimble is made from grade
requirements of the US National Association
316 stainless steel for maximum corrosion
of Chain Manufacturers’ specifications.
resistance and durability. It is ideal for
marine and industrial rigging and wire
rope applications.

Chain Size Working Load Limit Weight

Stock Wire Rope Diameter (in.) (lbs.) (lbs./ft.)
Number in Inches
5/32 500 0.20
400-440 1/8
3/16 1,200 0.30
400-450 3/16
1/4 1,570 0.57
440-460 1/4
5/16 2,400 0.98
400-470 5/16
3/8 3,550 1.50
400-480 3/8
1/2 5,400 2.00
400-490 1/2
5/8 11,000 3.31
400-500 5/8
3/4 15,000 5.00

STAINLESS STEEL SCREW STAINLESS STEEL TURNBUCKLES

PIN ANCHOR SHACKLES Made from grade 316 stainless steel for maximum
This anchor shackle is made from grade 316 corrosion resistance and durability. They are ideal
NM stainless steel and features an oversize for marine and industrial applications.
screw pin. Stainless steel anchor shackles
are ideal for salt water applications. The
anchor shackle is primarily used to connect
the anchor to the chain.

Stock Rope Diameter Work Load Limit Eye & Eye Jaw & Jaw Turnbuckle Work Load Limit
Number in Inches in Pounds Stock Number Stock Number Size in Pounds
600-1980 1/4 1,000 600-27245 600-28020 3/8” x 6” 1,200
600-2080 5/16 1,500 600-27295 600-28070 1/2” x 6” 2,200
600-2180 3/8 2,000 600-27420 600-28170 5/8” x 6” 3,500
600-2380 1/2 4,000 600-27495 600-28270 3/4” x 6” 5,200
600-2470 5/8 6,000

STAINLESS STEEL CLIPS

Stock Size Minimum Turnback length
Number in Inches Clips Required in Inches
400-2110 1/6 2 2/12
400-2120 1/8 2 3 1/4
400-2130 3/16 3 3 3/4
440-2140 1/4 3 4 3/4
400-2160 5/16 3 5 1/4
400-2170 3/8 3 6 1/2
400-2180 1/2 3 11 1/2
This wire clip is precision cast and made from
call 5/8 3 12 grade 316 stainless steel for maximum corrosion
call 3/4 4 18 resistance and durability. It is ideal for marine and
industrial rigging applications.
call 7/8 4 19
call 1 5 26

215.721.9333 | 61
CHAIN & ACCESSORIES
A-342 MASTER LINK
GRADE 100 ALLOY CHAIN
• Alloy Steel — Quenched and Tempered.
• Alloy Steel. • Individually Proof Tested to values shown, with
certification.
• Heat Treated.
• Proof Tested with special fixtures sized to
• 25% stronger than Grade 80 Alloy Chain. prevent localized point loading.
• Permanently embossed with CG (Crosby Group)
and 10 (Grade).
• Finish - Black rust preventative coating.
Stock Crosby Size Working Load Limit Weight Each
• Proof Tested at 2 times the Working Load Limit Number Part Number (in.) in Pounds (lbs.)
with certification.
600-20 1014266 1/2 7,400 1.3
600-110 1014280 5/8 9,000 1.5
600-210 1014285 3/4 12,300 2.0
Stock Chain Size Working Load Limit Approximate Weight Per
Number (in.) (lbs.) 100 Ft. (lbs.) 600-275 3522213 7/8 15,200 3.3

1600-2110 9/32 (1/4) 4,300 75 600-315 3522214 1 26,000 6.1

1600-2210 3/8 8,800 148 600-415 3522215 1 1/4 39,100 12.0

1600-2310 1/2 15,000 249 600-515 3522216 1 1/2 61,100 18.6

1600-2410 5/8 22,600 378 600-610 3522217 1 3/4 84,900 25.2

1600-2510 3/4 35,300 590 600-710 3522218 2 102,600 37.0

LOK-A-LOY 10 ALLOY CONNECTING LINKS A-1358 CLEVIS GRAB HOOK

• Suitable for use with both Grade 80 and Grade • Forged Alloy Steel - Quenched and
100 chain. Tempered.
• Individually Proof Tested at 2-1/2 times Working • Individually Proof Tested to 2-1/2 times the
Load Limit with certification. Working Load Limit with certification
• Locking system that provides for simple assembly • Each hook has a Product Identification Code
and disassembly - no special tools needed. (PIC) for material traceabilit , along with the
• Meets ASTM A-952-02 standards for Grade 100 size and the name Crosby.
chain fittings. • Suitable for use with Grade 100 and Grade
• Forged Alloy Steel - Quenched and Tempered. 80 chain.
• Fatigue rated at 1-1/2 times the Working
Load Limit at 20,000 cycles.
Stock Crosby Size Working Load Weight Each
Number Part Number in Inches Limit (lbs.) (lbs.) Stock Crosby Size Working Load Weight Each
Number Part Number in Inches Limit (lbs.) (lbs.)
1700-1445 1015104 9/32 (1/4) 4,300 .26
1700-962 1049610 9/32 (1/4) 4,300 1.00
1700-1458 1015122 3/8 8,800 .75
1700-972 1049629 3/8 8,800 1.80
1700-1465 1015136 1/2 15,000 1.60
1700-1002 1049647 1/2 15,000 3.92
1700-1482 1015145 5/8 22,600 2.68
1700-1023 1049656 5/8 22,600 7.00
1700-1490 1015154 3/4 35,300 5.00

A-1338 CLEVIS CRADLE GRAB HOOK A-1328 EYE GRAB HOOK

• Forged Alloy Steel - Quenched and Tempered. • Forged Alloy Steel - Quenched and Tempered.
• Individually Proof Tested to 2-1/2 times the Working • Individually Proof Tested to 2-1/2 times the Working
Load Limit with certification Load Limit with certification
• The use of A-1338 Cradle Grab Hook will allow 100 • Each hook has a Product Identification Code (PIC) for
percent of the chain sling capacity. When used to hook material traceabilit , along with the size and the name
back to chain leg to form a choker, the angle of the Crosby.
choke must be 120 degrees or greater. When used as
a chain shortener, minimize twist of chain and ensure • Fatigue rated at 1-1/2 times the Working Load Limit at
chain is fully engaged in hook. 20,000 cycles.

Stock Crosby Size Working Load Weight Each Stock Crosby Size Working Load Weight Each
Number Part Number in Inches Limit (lbs.) (lbs.) Number Part Number in Inches Limit (lbs.) (lbs.)

1700-965 1049417 9/32 (1/4) 4,300 .45 1700-905 1026169 1/4 - 5/16 5,700 0.98

- 1049426 5/16 5700 .99 1700-915 1026187 3/8 8,800 1.60

1700-974 1049435 3/8 8,800 1.80 1700-925 1026196 1/2 15,000 3.30

1700-1004 1049444 1/2 15,000 3.92 1700-935 1026205 5/8 22,600 6.00

1700-1025 1049453 5/8 22,600 7.00 1700-945 1026214 3/4 35,300 10.00

62 | nelsonwirerope.com
 CHAIN & ACCESSORIES
A-1339 CLEVIS SLING HOOK S-1327 EYE SLING HOOK
• Forged Alloy Steel - Quenched and Tempered. • Forged Alloy Steel - Quenched and Tempered.
• Individually Proof Tested to 2-1/2 times the Working Load • Individually Proof Tested to 2-1/2 times the Working Load
Limit with certification. Limit with certification.
• Each hook has a Product Identification Code (PIC) for • Each hook has a Product Identification Code (PIC) for
material traceability, along with the size and the name material traceability, along with the size and the name
Crosby & U.S.A. in raised letters. Crosby & U.S.A. in raised letters.
• Low profile hook tip. • Low profile hook tip.
• New integrated latch (S-4320/S-4339) meets the world • New integrated latch (S-4320/S-4339) meets the world
standard for lifting. standard for lifting.

Stock Crosby Size Working Load Weight Each Stock Crosby Size Working Load Weight Each
Number Part Number in Inches Limit (lbs.) (lbs.) Number Part Number in Inches Limit (lbs.) (lbs.)

1700-1140 1049112 9/32 (1/4) 4,300 1.58 1700-1090 1025869 1/4 (5/16) 5,700 1.3

1700-1182 1049130 3/8 8,800 2.58 1700-1100 1025878 3/8 8,800 2.3

1700-1252 1049149 1/2 15,000 5.28 1700-1110 1025887 1/2 15,000 4.5

1700-1285 1049158 5/8 22,600 9.81 1700-1120 1025896 5/8 22,600 8.4

1700-1300 1049167 3/4 35,300 18.3 1700-1130 1025915 3/4 35,300 15.0

A-1359 CLEVIS FOUNDRY HOOK A-1329 EYE FOUNDRY HOOK

• Forged Alloy Steel - Quenched and Tempered. • Forged Alloy Steel - Quenched and Tempered.
• Individually Proof Tested to 2-1/2 times the • Individually Proof Tested to 2-1/2 times the
Working Load Limit with certification. Working Load Limit with certification.
• Suitable for use with Grade 100 and Grade • Suitable for use with Grade 100 and Grade
80 chain. 80 chain.
• Fatigue rated at 1-1/2 times the Working Load • Fatigue rated at 1-1/2 times the Working Load
Limit at 20,000 cycles. Limit at 20,000 cycles.
• Hook can be tip loaded at the reduced • Hook can be tip loaded at the reduced
Working Load Limit. Operator must ensure the Working Load Limit. Operator must ensure the
load is retained properly in the hook. load is retained properly in the hook.

Stock Crosby Size Working Load Weight Each Stock Crosby Size Working Load Weight Each
Number Part Number in Inches Limit (lbs.) (lbs.) Number Part Number in Inches Limit (lbs.) (lbs.)

1700-1340 1049907 9/32 (1/4) 4,300 2.10 1700-1370 1026280 9/32 (1/4) 4,300 2.40

1700-1350 1049916 3/8 8,800 4.29 1700-1380 1026289 3/8 8,800 4.50

1700-1360 1049925 1/2 15,000 7.93 1700-1390 1026297 1/2 15,000 7.10

1700-1365 1049934 5/8 22,600 14.2 1700-1400 1026306 5/8 22,600 12.20

- 1049943 3/4 35,300 24.7 1700-1405 1026315 3/4 35,300 19.30

S-1325A GRADE 100 CHAIN COUPLER A-1355 CHAIN CHOKER HOOK

• Designed to connect Grade 100 chain fittings produced • Forged Alloy Steel - Quenched and Tempered.
with “Engineered Flat” to Grade 100 chain. • Individually Proof Tested with certification.
• Forged Alloy Steel - Quenched and Tempered. • Rated for Grade 100 chain in choker applications.
• Suitable for use with Grade 100 and Grade 80 chain. • Each hook has a Product Identification Code (PIC) for material
• Individually Proof Tested to 2-1/2 times the Working Load traceability, along with the size and the name Crosby & U.S.A.
Limit with certification. in raised letters.
• Locking system that provides for simple assembly and • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000
disassembly – no special tools required. cycles.
• For use with S-1325 Chain Coupler Link.

Crosby Size Working Load Weight Each Crosby Size Working Load Weight Each
Part Number in Inches Limit (lbs.) (lbs.) Part Number in Inches Limit (lbs.) (lbs.)
1098500 9/32 (1/4) 4,300 .26 1015204 1/4 5,700 .77
1098508 3/8 8,800 .75 1015213 3/8 8,800 1.65
1098512 1/2 15,000 1.60 1015222 1/2 15,000 3.14
1098516 5/8 22,600 2.68 1015231 5/8 22,600 6.97

215.721.9333 | 63
CHAIN & ACCESSORIES
GRABIQ GRADE 100 ALLOY CHAIN MF OBLONG MASTER LINK
• Each link calibrated & pull tested to 2 ½ times • Wide master link to fit most standard hooks.
working load limit • Engineered flat to help match with correct
• Minimum elongation of 20% connecting link
• Fully hardened & tempered alloy steel • Product identification code for full traceability
• Distinctive blue powder coat finish • Proof tested to 2 ½ times working load limit
• Links embossed with grade and traceability code

Working Load Limit (lbs.)

Trade Weight
Model Size 1 Leg 2 Leg 3/4 Leg Each
(in.) Slings Slings Slings (lbs.)
Chain Size Working Load Limit Approximate Weight
Model MF-86-10 1/2” 5,700 - - 0.9
(in.) (lbs.) Per 100 Ft. (lbs.)
KLA-8-10 5/16 5,700 97 MF-108-10 5/8” 8,800 9,900 - 1.8

KLA-10-10 3/8 8,800 151 MF-1310-10 7/8” 15,000 15,200 14,800 3.3

KLA-13-10 1/2 15,000 253 MF-1613-10 1” 22,600 26,000 22,900 4.8

KLA-16-10 5/8 22,600 394 MF-2016-10 1 3/8” - 39,100 39,000 11.5

MF-2220-10 1 1/2” - - 58,700 16.1

MFX OBLONG MASTER LINK MFH OBLONG MASTER LINK

• The MFX GrabiQ Master Link is oversized for large crane
hooks. It is used to fabricate 1-Leg and 2-Leg chain slings • Designed for use with CL, CLD, CG and CGD. 3- and
using C-Connectors. 4-leg chain slings require CLD / CGD.
• Oversized master link to fit most large crane hooks. • Grade 100
• Engineered flat to help match with correct connecting link • Forged Alloy Steel
• Product identification code for full traceability • Individually Proof Tested
• Proof tested to 2 ½ times working load limit

Working Load Limit (lbs.)

Working Load Limit (lbs.) Trade Weight
Lok-a-loy 10 Alloy Connecting Links
Trade Size Weight Each Model Size Each
Model 1 Leg 2 Leg 3/4 Leg
(in.) 1 Leg 2 Leg (lbs.) (in.) (lbs.)
Slings Slings Slings
Slings Slings
MFH-1310-10 7/8 5,700 - - 4.2
MFX-108-10 1 5,700 - 8.2
MFH-1310-10 7/8 8,800 9,900 - 4.2
MFX-108-10 1 8,800 9,900 8.2
MFH-1310-10 7/8 15,000 15,200 14,800 4.2
MFX-1310-10 1 1/8 15,000 15,200 10.4
MFH-1613-10 1 22,600 26,000 22,900 7.1
MFX-1613-10 1 3/8 22,600 26,000 15.6
MFH-2016-10 1 1/4 - 39,100 39,000 10.1
MFX-2016-10 1 1/2 - 39,100 18.7
MFH-2220-10 1 1/2 - 58,700 19.0

MASTER GRAB TYPE MG MASTER GRAB TYPE MGD

• Fully self-contained top assembly for 1-leg, adjustable • Fully self-contained top assembly for 2-leg, adjustable
sling sling
• Integrated cradle chain pocket for shortening leg • Integrated cradle chain pocket for shortening leg
• Product Information Code for full traceability • Product Information Code for full traceability
• Forged model number includes fitting size and grade • Forged model number includes fitting size and grade
• Proof tested to 2 ½ times Working Load Limit • Proof tested to 2 ½ times Working Load Limit
• Chain shortening pockets are 100% efficient

Chain Size Working Load Limit Weight Each Chain Size Working Load Limit Weight Each
Model Model
(in.) (lbs.) (lbs.) (in.) (lbs.) (lbs.)
MG-8-10 5/16 5,700 2.0 MGD-8-10 5/16 9,900 2.9
MG-10-10 3/8 8,800 4.0 MGD-10-10 3/8 15,200 5.1
MG-13-10 1/2 15,000 7.7 MGD-13-10 1/2 26,000 11.5
MG-16-10 5/8 22,600 13.4 MGD-16-10 5/8 39,100 17.4

64 | nelsonwirerope.com
 CHAIN & ACCESSORIES

C-GRAB TYPE CG C-GRAB TYPE CGD

• Includes integrated chain pocket for • Includes integrated chain pocket to adjust
shortening each leg
• Chain is cradled so working load limit is not • Chain is cradled so working load limit is not
reduced when shortening chain leg reduced when shortening chain leg
• Product identification code for full • Product identification code for full
traceability traceability
• Proof tested to 2 ½ times working load limit • Proof tested to 2 ½ times working load limit

Chain Size Working Load Limit Weight Each Chain Size Working Load Limit Weight Each
Model Model
(in.) (lbs.) (lbs.) (in.) (lbs.) (lbs.)
CG-8-10 5/16 5,700 1.5 CGD-8-10 5/16 5,700 2.4
CG-10-10 3/8 8,800 3.3 CGD-10-10 3/8 8,800 4.8
CG-13-10 1/2 15,000 7.1 CGD-13-10 1/2 15,000 11.9
CG-16-10 5/8 22,600 13.4 CGD-16-10 5/8 22,600 20.1

GG GRAB HOOK EGKN SLING HOOK

(CLEVIS CRADLE TYPE) • Wide throat opening for easy rigging
• Hood forged in hook protect latch top
• No reduction in Working Load Limit due to
supporting cross bar in saddle of hook • Latch spring is stainless steel
• Deep chain pocket • Heavy duty tip interlocks with hook body
• Full traceability • Replacement latch can be installed in the field
• Proof tested and certified • Full traceability
• Proof tested and certified

Chain Size Working Load Limit Weight Each Chain Size Working Load Limit Weight Each
Model Model
(in.) (lbs.) (lbs.) (in.) (lbs.) (lbs.)
GG-8-10 5/16 5,700 0.88 EGKN-8-10 5/16 5,700 1.1
GG-10-10 3/8 8,800 2.0 EGKN-10-10 3/8 8,800 2.2
GG-13-10 1/2 15,000 4.0 EGKN-13-10 1/2 15,000 5.1
GG-16-10 5/8 22,600 6.8 EGKN-16-10 5/8 22,600 8.4

GBK SELF LOCKING HOOK LKBK SWIVEL HOOK

WITH BEARING
• Hook latch & bowl interlock for more stability from
inadvertent side impact • Ball bearing allows hook to swivel under load
• Stainless steel spring release trigger will only • Hook latch & bowl interlock for more stability from
operate when hook is unloaded inadvertent side impact
• Full traceability • Bail allows attachment to chain, wire rope, or
synthetic slings
• Proof tested to 2 ½ times working load limit
• Stainless steel spring release trigger will only operate
when hook is unloaded
• Full traceability
• Proof tested to 2 ½ times working load limit

Chain Size Working Load Limit Weight Each Chain Size Working Load Limit Weight Each
Model Model
(in.) (lbs.) (lbs.) (in.) (lbs.) (lbs.)
GBK-8-10 5/16 5,700 1.8 LKBK-8-10 5/16 5,700 1.8
GBK-10-10 3/8 8,800 3.1 LKBK-10-10 3/8 8,800 4.0
GBK-13-10 1/2 15,000 6.0 LKBK-13-10 1/2 15,000 8.4
GBK-16-10 5/8 22,600 9.7 LKBK-16-10 5/8 22,600 13.2

215.721.9333 | 65
CHAIN & ACCESSORIES
GRADE 70 TRANSPORT CHAIN
• Do not use for overhead lifting
• High-carbon steel, heat treated
• Zinc plated with gold chromate finish
• Thermal heat treated using advanced technology
• Heat treated for superior wear and toughness
• Design factor 4:1

Stock Chain Size Feet for Approx. Weight Working Load Limit
No. In Inches Half of a Drum Per 100 Feet (lbs.) in Pounds
1600-1710 1/4 400 75 3,150
1600-1810 5/16 275 111 4,700
1600-1910 3/8 200 157 6,600
1600-2010 1/2 100 274 11,300

GRADE 70 CLEVIS GRAB HOOK GRADE 70 EYE GRAB HOOK

Clevis Hooks are not designed for overhead Standard Eye Hooks are not designed for
lifting, but instead are most often used for load overhead lifting, but instead are most often used
securement with tie-down chains. These feature for load securement with tie-down chains. Eye
a U-shaped attachment point with a pin to hooks feature a simple circular attachment point
secure chain or other rigging attachments for rigging chain or other attachments.

• Do not use for overhead lifting • Do not use for overhead lifting
• Designed specifically for transport Grade 70 chain • Designed specifically for transport Grade 70 chain
• 4:1 design factor • 4:1 design factor
• Yellow chromate finish • Self-colored finish

Stock Size Work Load Limit Unit Weight Stock Size Work Load Limit Unit Weight
No. in Inches in Pounds in Pounds No. in Inches in Pounds in Pounds

1700-750 5/16” 4,700 .70 1700-750 5/16” 4,700 .70

1700-760 3/8” 6,600 1.06 1700-760 3/8” 6,600 1.06

1700-780 1/2” 11,300 2.31 1700-780 1/2” 11,300 2.31

GRADE 70 CLEVIS SLIP HOOK GRADE 70 CLEVIS SLIP HOOK W/LATCH

Clevis Hooks are not designed for Clevis Hooks are not designed for
overhead lifting, but instead are most often overhead lifting, but instead are most often
used for load securement with tie-down used for load securement with tie-down
chains. These feature a U-shaped chains. These feature a U-shaped
attachment point with a pin to secure chain attachment point with a pin to secure chain
or other rigging attachments. or other rigging attachments.

• Do not use for overhead lifting • Do not use for overhead lifting
• Designed specifically for transport Grade 70 • Designed specifically for transport Grade 70
chain chain
• 4:1 design factor • 4:1 design factor
• Hook embossed with trace code providing • Galvanized Finish
traceability throughout the manufacturing and
testing process to heat of steel
• Durable orange powder coated finish

Stock Size Work Load Limit Unit Weight Stock Size Work Load Limit Unit Weight
Number in Inches in Pounds in Pounds No. in Inches in Pounds in Pounds
1700-830 5/16” 4,700 .94 1700-835 5/16” 4,700 .95
1700-840 3/8” 6,600 1.44 1700-845 3/8” 6,600 1.46
1700-860 1/2” 11,300 2.86 1700-865 1/2” 11,300 2.88
1700-870 5/8” 15,800 3.8

66 | nelsonwirerope.com
 CHAIN & ACCESSORIES
GRADE 70 BINDER CHAINS
• Do not use for overhead lifting
• Meets all Department of Transportation requirements and is required in most state by the D.O.T
• Custom lengths available

Stock Chain Size Work Load Limit Breaking Strength Unit Weight
Number and Length in Pounds in Pounds in Pounds
1800-275 5/16” x 10’ 4,700 18,800 11
1800-300 5/16” x 14’ 4,700 18,800 15
1800-310 5/16” x 16’ 4,700 18,800 17
1800-410 5/16” x 20’ 4,700 18,800 21
1800-510 5/16” x 25’ 4,700 18,800 26
1800-560 3/8” x 10’ 6,600 26,400 17
1800-600 3/8” x 14’ 6,600 26,400 21
1800-610 3/8” x 16’ 6,600 26,400 24
1800-710 3/8” x 20’ 6,600 26,400 30
1800-810 3/8” x 25’ 6,600 26,400 37

HEAVY DUTY RATCHET BINDER - PRO-BIND SERIES

This Durabilt Ratchet Load Binder is the professional way to anchor and tie
down large loads. Big handles and carbon steel construction for maximum
leverage and greater strength.Ratchet makes load tightening faster and
easier and permits quicker tightening if load shifts. Great for securing heavy
equipment, cargo and more.

Stock Chain Size Work Load Limit Maximum Unit Weight

Number Min. to Max in Pounds Take Up in Pounds
1700-1870 3/16” to 1/4” 2,600 4” 3.5
1700-1880 5/16” to 3/8” 7,300 8” 12.5
1700-1910 3/8” to 1/2” 12,000 8” 12.9
1700-1930 1/2” to 5/8” 13,000 8” 15
1/2” to 5/8”
1700-1935 13,000 8” 16.3
with 5/8” Slip Hook

LEVER TYPE LOAD BINDERS

• Designed for quick and secure loading
• Forged handle snaps the binders easily in place
• Features a grab hook on each end
• 5" take up for secure chain tensioning
• Meets all CVSA and DOT requirements

Stock Number Chain Size Min. to Max Work Load Limit in Pounds Maximum Take Up Unit Weight in Pounds
1700-1790 3/16” to 1/4” 2,600 3 3/4” 3
1700-1800 5/16” to 3/8” 5,400 4 1/2” 8
1700-1820 3/8” to 1/2” 9,200 4 1/2” 10

215.721.9333 | 67
CHAIN & ACCESSORIES
GRADE 30 SELF COLORED CHAIN
Grade 30 chain, commonly called Proof Coil, is manufactured to meet ASTM & NACM
specifications. Typical uses include barrier chains, trailer safety chains, light construction,
marine industry, etc. It should not be used for overhead lifting.

Stock Chain Size Feet for Approximate Weight Working Load Limit
Number in Inches Half of a Drum Per 100 Feet (lbs.) in Pounds
1600-10 3/16 500 40 750
1600-310 1/4 400 71 1,250
1600-610 5/16 275 109 1,900
1600-910 3/8 200 159 2,650

GRADE 30 ZINC PLATED CHAIN

Grade 30 chain, commonly called Proof Coil, is manufactured to meet ASTM & NACM
specifications. Typical uses include barrier chains, trailer safety chains, light construction,
marine industry, etc. It should not be used for overhead lifting.

Stock Chain Size Feet for Approximate Weight Working Load Limit
Number in Inches Half of a Drum Per 100 Feet (lbs.) in Pounds
1600-110 3/16 500 40 750
1600-410 1/4 400 71 1,250
1600-710 5/16 275 109 1,900
1600-1010 3/8 200 159 2,650

GRADE 30 HOT DIP GALVANIZED CHAIN

Grade 30 chain, commonly called Proof Coil, is manufactured to meet ASTM & NACM
specifications. Typical uses include barrier chains, trailer safety chains, light construction,
marine industry, etc. It should not be used for overhead lifting.

Stock Chain Size Feet for Approximate Weight Working Load Limit
Number in Inches Half of a Drum Per 100 Feet (lbs.) in Pounds
1600-210 3/16 500 40 750
1600-510 1/4 400 71 1,250
1600-810 5/16 275 109 1,900
1600-1110 3/8 200 159 2,650

GRADE 43 HIGH TEST CHAIN

Grade 43 chain, commonly called High Test, is manufactured to meet ASTM and NACM
specifications. Typical uses include container securement, logging, towing, and marine
industry. Grade 43 chain is available in many finishes and package configurations.
It should not be used for overhead lifting.

Stock Chain Size Feet for Approximate Weight Working Load Limit
Number In Inches Half of a Drum Per 100 Feet (lbs.) in Pounds

1600-1210 1/4 400 75 2,600

1600-1310 5/16 275 111 3,900
1600-1410 3/8 200 157 5,400
1600-1510 1/2 100 274 9,200

68 | nelsonwirerope.com
 CHAIN & ACCESSORIES
GRADE 43 CLEVIS SLIP HOOK GRADE 43 EYE SLIP HOOK
• Hooks are heat treated and tempered • Hooks are heat treated and tempered
• Design factor 4:1 when used with Grade 30 • Design factor 4:1 when used with Grade 30
• Design factor 3:1 when used with Grade 43 • Design factor 3:1 when used with Grade 43
• When using these hooks with Grade 30 chain, the • When using these hooks with Grade 30 chain, the
assembly must be rated to the working load limit assembly must be rated to the working load limit
of the chain. of the chain.
• Hook embossed with trace code providing • Hook embossed with trace code providing
traceability through manufacturing and testing traceability through manufacturing and testing
process to heat of steel process to heat of steel
• Zinc plated finish • Not to be used for overhead lifting
• Not to be used for overhead lifting

Stock Size Working Load Limit Weight Each Stock Size Working Load Limit Weight Each
Number in Inches (lbs.) (lbs.) Number in Inches (lbs.) (lbs.)
1700-580 1/4 2,600 0.35 1700-510 1/4 2,600 0.38
1700-600 5/16 3,900 0.63 1700-520 5/16 3,900 0.57
1700-620 3/8 5,400 1.02 1700-530 3/8 5,400 0.83
1700-650 1/2 9,200 2.27 1700-550 1/2 9,200 1.95
1700-665 5/8 13,000 4.00 1700-560 5/8 13,000 3.72

GRADE 43 CLEVIS GRAB HOOK GRADE 43 EYE GRAB HOOK

• Hooks are heat treated and tempered • Hooks are heat treated and tempered
• Design factor 4:1 when used with Grade 30 • Design factor 4:1 when used with Grade 30
• Design factor 3:1 when used with Grade 43 • Design factor 3:1 when used with Grade 43
• When using these hooks with Grade 30 chain, the • When using these hooks with Grade 30 chain, the
assembly must be rated to the working load limit of assembly must be rated to the working load limit of
the chain. the chain.
• Hook embossed with trace code providing traceability • Hook embossed with trace code providing traceability
through manufacturing and testing process to heat of through manufacturing and testing process to heat
steel of steel
• Not to be used for overhead lifting • Zinc plated finish
• Not to be used for overhead lifting

Stock Size Working Load Limit Weight Each Stock Size Working Load Limit Weight Each
Number in Inches (lbs.) (lbs.) Number in Inches (lbs.) (lbs.)
1700-450 1/4 2,600 0.37 1700-390 1/4 2,600 0.30
1700-460 5/16 3,900 0.63 1700-400 5/16 3,900 0.56
1700-470 3/8 5,400 1.10 1700-410 3/8 5,400 0.87
1700-480 7/16 7,200 1.60 1700-430 1/2 9,200 2.17
1700-490 1/2 9,200 2.42 1700-440 5/8 13,000 3.89
1700-500 5/8 13,000 3.61

S-237 DOUBLE CLEVIS LINK S-249 TWIN CLEVIS LINK

• All pins alloy steel - Quenched and tempered • All pins alloy steel - Quenched and tempered
• Body is forged and heat treated carbon steel • Body is forged and heat treated carbon steel
• designed for linking all popular sizes of grade 30 and • Twin clevis design provides a variety of uses and can be
40 chain to rings, end links, eye hooks, pad eyes, used with grade 30, grade 40 and grade 70 chain
tractor eye bolts, etc.
• Features quick and easy assembly
• Features quick and easy assembly
• Not to be used for overhead lifting
• Not to be used for overhead lifting

Stock Crosby Size Weight Each Stock Crosby Size Weight Each
Number Part Number (in.) (lbs.) Number Part Number (in.) (lbs.)
1700-10 1013021 1/4” .38 1700-50 1012861 1/4” - 5/16” .31
1700-20 1013049 5/16” - 3/8” .81 1700-60 1012889 3/8” .44
1700-30 1013067 7/16” 1.25 1700-70 1012905 7/16” - 1/2” .98
1700-40 1013085 1/2” 1.56

215.721.9333 | 69
RIGGING TOOLS

CROSBY IP10
The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates,
or fabrications from horizontal to vertical and down to horizontal (180º) as needed. Usually used as a
single point pick or when used with a spreader beam with multiple vertical drop lines.

Crosby Part Work Load Limit Jaw Opening Unit Weight

Number in Tons in Inches in Pounds

2701674 1/2 0-5/8 4.0

2701662 1 0-3/4 4.4

2701676 2 0-1 3/8 15.0

2701664 3 0-1 5/8 30.4

CROSBY IPU10
The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet,
plates, or fabrications from horizontal to vertical and down to horizontal (180º) as needed. The hinged
hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg
sling without damaging the clamp.

Part Work Load Limit Jaw Opening Unit Weight

Number in Tons in Inches in Pounds
2701675 1/2 0-5/8 4.2
2701663 1 0-3/4 4.6
2701667 2 0-1 3/8 16.8
2701665 3 0-1 5/8 32.6

CROSBY IPH10
IPH10 clamps are made for the horizontal lifting and transfer of non-sagging material. These clamps
should always be used in pairs (a minimum of two clamps per lift), and the Working Load Limits shown
below are based on one pair of clamps, not per piece. And with the exception of the two smallest
sizes, these clamps feature two great updates: 1) Magnets ensure the clamps remain in the proper
position on the plate and 2) A handle and torsion spring that combine to make the placing of the
clamp onto the plate quick, easy and safe.

Part Work Load Limit Jaw Opening Unit Weight

Number in Tons in Inches in Pounds
2703297 1/2 0-3/4 3.97
2703298 1 0-1 3/8 5.5
2703522 2 0-2 3/8 12.1
2703523 3 0-2 3/8 16.5
2703524 4 1/2 0-2 3/8 23.1

70 | nelsonwirerope.com
 RIGGING TOOLS

J.C. RENFROE MODEL LA

Model LA is an ergonomic vertical lifting clamp capable of turning a single plate or member from
horizontal to vertical to horizontal through a 180 degree arc. It incorporates a push button auxiliary
lock.

The “Lock Open – Lock Closed” feature facilitates attaching and removing the clamp from the plate.

Rated Capcity Plate Thicknes Unit Weight

in Tons in Inches in Pounds
1/2 0-5/8 4.13
1 0-3/4 5.13
2 0-1 16.88
3 0-1 32

J.C. RENFROE MODEL LPA

Model LPA is an ergonomic vertical lifting clamp capable of turning a single plate or member from
horizontal to vertical to horizontal through a 180 degree arc. It incorporates an auxiliary push button
lock. Permits side loading of lifting shackle to 90 degrees by de-rating of clamp’s capacity. Refer to
FIGURE 1 for de-rated capacities. The “Lock Open – Lock Closed” feature facilitates attaching and
removing the clamp from the plate.

The Model LPA incorporates a pivoting shackle that permits side loading of the lifting shackle at
100 percent of rated capacity from vertical to 30 degrees, 75 percent of rated capacity between 30
and 45 degrees, and 50 percent of rated capacity between 45 and 90 degrees.

Rated Capcity Plate Thicknes Unit Weight

in Tons in Inches in Pounds
1/2 0-5/8 4.13
1 0-3/4 5.13
2 0-1 16.88
3 0-1 32

J.C. RENFROE MODEL LHC

LHC Model is a horizontal lifting clamp intended to be used in pairs, sets of pairs or in a tripod
arrangement for transporting steel plates horizontally. The clamp is designed to lift individual sheets
horizontally. Cam opera- tions ensure a tight grip on the load. Serrated gripping cam bites into load
for positive grip. Clamps rest in position on edge of plate until tension is applied to the load sling.
Clamps must be used in single pairs (2), double pairs (4), or tripod (3) configuration with a lifting
sling.

Rated Capcity Jaw Opening Unit Weight

in Tons in Inches in Pounds
1/4 0-1 3
1/2 0-2 14
3/4 0-2 19
1 1/2 0-2 26
3 0-2 24
4 0-3 48

215.721.9333 | 71
RIGGING TOOLS

LINCOLN STANDARD CABLE RATCHET WINCH HOIST

For over 60 years these hoists have set the standard for cable ratchet winch hoists. The Standard
Series feature models from 1000 to 6000 lb capacity.

• Oiled for life bearings

• Highly flexible aircraft cable
• Hydraulically crimped copper sleeve for more uniform hold
• Reversable handle bends on overload
• Cable shield protects cable and promotes even winding
• USA forged steel hooks

Single Line Double Line Hoist

Model Cable Diamter Handle Length
Capacity Lift Distance Capacity Lift Distance Weight
Number (in.) (in.)
(lbs.) (ft.) (lbs.) (ft.) (lbs.)

LH 1000-15 3/16 17-1/2 1,000 15 x x 7

LH 1500-25 5/32 15 1,500 10 3,000 5 8.5
LH 2250-15 3/16 17-1/2 1,500 30 3,000 15 8.75
LH3000-10 7/32 20 2,000 20 4,000 10 9
LH4000-20 1/4 30 3,000 15 6,000 7 1/2 15.5

LINCOLN STANDARD WEB RATCHET WINCH HOIST

For over 40 years these web strap pullers have been the choice of the electric utility industry.
These hoists meet the ASME B30.21 spec. and go further with our stress link overload warning
system and RFID tracking. The Standard Series feature models from 2000 to 4000 lb capacity.

• Oiled for life bearings

• Synthetic web strap
• 1.25” OD fiberglass handle for extra stiffness
• Reversable handle with 2 spare stress links
• Double flanged drum - keeps web strap from coming in contact with ratchet teeth
• USA forged steel hooks

Single Line Double Line Hoist

Model Handle Length
Capacity Lift Distance Capacity Lift Distance Weight
Number (in.)
(lbs.) (ft.) (lbs.) (ft.) (Lbs.)

2W10 30 1,000 9 2,000 4.5 10.25

2W10S 20 1,000 9 2,000 4.5 10.25
3W08 30 1,500 7 3,000 3.5 10.25
3W08S 20 1,500 7 3,000 3.5 10.25
3W15 30 1,500 14 3,000 6.25 14
4W12 36 2,000 10 4,000 5 14.75

72 | nelsonwirerope.com
 RIGGING TOOLS

UBC UNIVERSAL BEAM CLAMP

Harrington’s UBC Universal Beam Clamp is the perfect accessory when a
temporary or semi- permanent hoist anchor point is required. Additionally used as
a below-the-hook lifting attachment, this adjustable beam clamp offers an efficient,
cost-effective method for most workholding and positioning applications.
Available in capacities of 1, 2, 3, 5 and 10 Tons.

• Meets ASME BTH-1, ASME B30.20 and complies with portions of ASME B30.16 for use with manual and powered hoists
• Design factor minimum of 5:1 per ASME B30.16 requirements
• Lock nut feature resists loosening to improve secure clamping
• Built-in suspension pin for low headroom
• Metric rated capacity
• Each Universal Beam Clamp is individually serialized and load tested
• (test certificates included)
• Made in the USA

Part Capacity Flange Range Max Beam Flange Thickness Net Weight Shipping Weight Approx
Number in Tons (in.) (in.) (lbs.) (lbs.)
UBC010 1 8 10
3.00 to 7.50 0.83
UBC020 2 9 11
UBC030 3 19 22
4.00 to 12.00 1.00
UBC050 5 22 25
UBC0100 10 6.00 to 13.25 1.75 55 60

PT/GT MANUAL TROLLEYS

Harrington's PT push trolleys and GT geared trolleys are versatile and durable and
are the economical choice for adding mobility to our hoists. Maintenance-free sealed
ball bearings provide smooth operation and long efficient service.

• Capacities of PT push trolleys from ½ Ton through 10 Ton

• Capacities of GT geared trolleys from ½ Ton through 20 Ton
• Contoured wheels fit on tapered and flat flanged beams
• Lightweight and compact for easy installation
• Fully adjustable to fit any flange width

**For GT geared trolley inquiries, please contact us for more information

Part Capacity Minimum Radius Flange Width Net Weight Shipping Weight
Number (Tons) for Curve (in.) Adjustability (in.) (lbs.) (lbs.)
PTF2005 1/2 13.8 2.28 to 4.00 9 9
PTF2010 1 17.7 2.28 to 5.00 15 16
PTF2020 1 1/2 - 2 21.7 29 30
3.23 to 6.02
PTF2030 2 1/2 - 3 25.6 46 47
PTF2050 5 78.7 4.92 to 7.02 95 98
PT080 8
118.1 8.67 to 12.00 212 254
PT100 10

215.721.9333 | 73
RIGGING TOOLS

LB LEVER HOIST
The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in
tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in
heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance
and repair.

Many Benefits From More Features:

• Rugged, all-steel construction that actually weighs less than comparable aluminum models.
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with
four braking surfaces. Includes two brake pawls for additional reliability.
• Enjoy protection against dirt and moisture with a totally enclosed brake mechanism.
• Ensure long life with machined, heat-treated, split load double reduction gears.
• Operate in close quarters with short steel handle and 15-degree recovery strokes.
• Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against
accidental freewheeling under load.
• Equipped with standard rubber grip for non-slip operation.

Capabilities To Count On:

• 5-foot lift is standard, 10-, 15- and 20-foot lifts also stocked; nonstandard lifts available as well.
• Grade 100 heat-treated load chain is nickel plated for corrosion resistance.
• Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. Top and bottom
hooks rotate 360.˚
• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity, in accordance with
ASME B30.21 requirements.

Capacity Product Headroom Std. Lift Pull to Lift Load* Load Chain Dia. Net Weight Weight for Additional
(tons) Code C (in) (ft) (lbs) (mm) x Chain Fall Lines (lbs) One Foot of Lift (lbs)
3/4 LB008 11.0 54 (36) 13
5.6 x 1 0.5
1 LB010 11.8 72 (46) 13
1 1/2 LB015 13.2 64 (45) 7.1 x 1 18 0.7
2 LB020 59 (42)
14.8 5 8.8 x 1 25 1.1
2 3/4 LB028 81 (57)
3 LB030 15.6 69 10.0 x 1 33 1.5
6 LB060 21.3 72 10.0 x 2 57 3.2
9 LB090 26.8 78 10.0 x 3 88 4.7

74 | nelsonwirerope.com
 RIGGING TOOLS

CF HAND CHAIN HOIST

Harrington CF hand chain hoists give you a practical alternative thanks to an
economical design using fewer parts for trouble-free service. Outstanding durability is due to a die-cast alumi-
num body and high-strength, heat-treated main pinion shaft and load gear. Pre-lubricated ball bearings, precision
machined gears, and Weston-style load brake make lifting smooth and easy while allowing long service and low
maintenance.

Many Benefits From More Features:

• Experience exceptional strength with a thick die-cast aluminum body.
• Handle tough demands with high-strength, heat-treated main pinion shaft and load gear.
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking
surfaces.
• Minimize manual effort thanks to smooth running, pre-lubricated ball bearings, and precision machined drive train components.
• Simplify maintenance with fewer parts and an easy-to-work-on design.

Capabilities To Count On:

• 10-foot lift is standard, 15- and 20-foot lifts are also stocked; nonstandard lifts and hand chain drops available as well.
• Grade 100 heat-treated manganese alloy load chain resists abrasion and wear while minimizing chain weight.
• Forged and heat-treated alloy steel hooks are designed to open slowly and not fracture under excessive loads.
• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity, in accordance with ASME B30.16
requirements.

Options:
• Chain Container
• Corrosion-resistant chain
• Inspection Hook

Cap Lift Model Headroom Pull to Lift Load Chain Diameter Net Weight Shipping Weight Approx.
(tons) (ft) No. C (in) Load* (lbs) (mm) x Chain Fall Lines (lbs) (lbs)
10 CF005-10 24 26
.5 15 CF005-15 12.8 60 5.0 x 1 29 31
20 CF005-20 34 36
10 CF010-10 29 31
1 15 CF010-15 14.6 72 6.3 x 1 35 37
20 CF010-20 40 43
10 CF015-10 40 42
1.5 15 CF015-15 17.3 84 7.1 x 1 47 49
20 CF015-20 54 57
10 CF020-10 47 49
2 15 CF020-15 20.1 80 6.3 x 2 56 58
20 CF020-20 65 68
10 CF030-10 62 66
3 23.2 7.1 x 2
20 CF030-20 92 72 75
5 10 CF050-10 24.4 7.1 x 3 82 86

215.721.9333 | 75
BELOW THE HOOK

HSDLB STANDARD DUTY LIFTING BEAM

Channel Design Beams Ranging from 1-40 tons

Features
• This style of lifting beam can be utilized where headroom is limited and comes with a pair of swivel hooks and three standard spreads (3’ and 4’ beams have two standard
spreads).
• Three standard lift points for load adjustment: outside lift point, middle lift point (outside less 1’), inside lift point (middle less 1’).
• Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
• 100% of ALL lifting beams are Proof-Tested to 125% capacity and certificates supplied at No Additional Charge.
• Made in USA.

Options
• Additional lift points
• Higher capacities
• Additional lengths
• Low headroom bail
• Additional hooks
• Shackle lugs
• Faspins
• Integrated beam stands

HSDLB Standard Duty Lifting Beam

Dimensions (Inches)
Capacity Outside Weight
Model # Bail Opening Bail Opening Hook
(US Tons) Spread Headroom Bail Height Bail Thickness (lbs.)
Width Height Opening

HSDLB-1-4 1 4 13 0.88 3 5 0.75 0.91 50

HSDLB-1-6 1 6 14 0.88 3 5 0.75 0.91 80
HSDLB-1-8 1 8 14 0.88 3 5 0.75 0.91 105
HSDLB-1-10 1 10 15 0.88 3 5 0.75 0.91 150
HSDLB-1-12 1 12 16 0.88 3 5 0.75 0.91 275
HSDLB-2-4 2 4 14 0.88 3 5 0.75 0.91 60
HSDLB-2-6 2 6 15 0.88 3 5 0.75 0.91 95
HSDLB-2-8 2 8 16 0.88 3 5 0.75 0.91 150
HSDLB-2-10 2 10 17 0.88 3 5 0.75 0.91 265
HSDLB-2-12 2 12 18 0.88 3 5 0.75 0.91 295
HSDLB-5-4 5 4 19 2 4 7 1.25 1.36 145
HSDLB-5-6 5 6 20 2 4 7 1.25 1.36 210
HSDLB-5-8 5 8 22 2 4 7 1.25 1.36 280
HSDLB-5-10 5 10 24 2 4 7 1.25 1.36 380
HSDLB-5-12 5 12 25 2 4 7 1.25 1.36 570
HSDLB-10-4 10 4 23 2 4 7 1.25 1.61 165
HSDLB-10-6 10 6 25 2 4 7 1.25 1.61 260
HSDLB-10-8 10 8 27 2 4 7 1.25 1.61 410
HSDLB-10-10 10 10 30 2 4 7 1.25 1.61 770
HSDLB-10-12 10 12 30 2 4 7 1.25 1.61 910

Please Note: For beams ranging between 15-40 ton capacities, please contact us at 215-721-9333 or email us at [email protected]

76 | nelsonwirerope.com
 BELOW THE HOOK

HALB ADJUSTABLE LIFTING BEAM

Features
• This style of lifting beam can lift off center loads easily by adjusting the bail prior to the lift.
• This lifter can be used where headroom is limited, & comes with multiple spreads that are adjustable to accommodate various load sizes at 6” adjustable
increments.
• Supplied with two lower shackles.
• Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
• 100% of ALL lifting beams are Proof-Tested to 125% capacity and certificates supplied at No Additional Charge.
• Made in USA.

Options
• Swivel Hooks

HALB Adjustable Lifting Beam

Dimensions (Inches)
Max Min.
Capacity Bail Bail Travel Shackle Weight
Model # Spread Spread Head- Bail Bail Opening Bail Opening Bail
(US Tons) Adjustment (Half of Size (lbs.)
(Ft.) (Ft.) room Height Width Height Thickness
Increments Center) (Tons)
HALB-1.25-6 1.25 6 3 13.5 1 3 5 0.63 3 12 2 120
HALB-2-6 2 6 3 14.5 1 3 5 0.63 3 12 2 140
HALB-4-8 4 8 4.5 20 1.5 4 7 0.75 6 18 3.25 315
HALB-5-10 5 10 5 22 1.5 4 7 1.00 6 18 4.75 440

215.721.9333 | 77
BELOW THE HOOK

HSDSB STANDARD DUTY SPREADER BEAM

Features

• This style of lifter is utilized with upper rigging spread between

two lift points that adds extra stability to the lift.
• This spreader beam should be utilized where headroom is not
limited and comes standard with a pair of swivel hooks.
• Can be supplied with optional chain or wire rope top rigging.
• Engineered and manufactured to ASME B30.20 & BTH-1 Design
Category B Service Class 2.
• 100% of ALL spreader beams are Proof-Tested to 125%
capacity and certificates supplied at No Additional Charge.
• Made in USA.

Options
• Higher capacities
• Additonal lengths
• Upper and lower shackle design
• Chain top rigging
• Wire rope top rigging

HSDSB Standard Duty Spreader Beam

Dimensions (Inches)
Capacity Outside Weight
Model # Oblong ML Oblong ML Oblong ML Hook
(US Tons) Spread (ft.) Headroom (Lbs.)
Diameter Opening Width Opening Height Opening

DSDSB-2-4 2 4 36 0.63 3 6 0.91 45

DSDSB-2-6 2 6 48 0.63 3 6 0.91 60
DSDSB-2-8 2 8 61 0.63 3 6 0.91 82
DSDSB-2-10 2 10 74 0.63 3 6 0.91 95
DSDSB-2-12 2 12 86 0.63 3 6 0.91 115
DSDSB-2-16 2 16 111 0.63 3 6 0.91 225
DSDSB-2-20 2 20 139 0.63 3 6 0.91 408
DSDSB-2-24 2 24 164 0.63 3 6 0.91 445
DSDSB-5-4 5 4 39 1 3.5 7 1.36 62
DSDSB-5-6 5 6 51 1 3.5 7 1.36 78
DSDSB-5-8 5 8 64 1 3.5 7 1.36 100
DSDSB-5-10 5 10 77 1 3.5 7 1.36 117
DSDSB-5-12 5 12 87 1 3.5 7 1.36 168
DSDSB-5-16 5 16 116 1 3.5 7 1.36 305
DSDSB-5-20 5 20 141 1 3.5 7 1.36 435
DSDSB-5-24 5 24 166 1 3.5 7 1.36 661
DSDSB-10-4 10 4 43 1.25 4.38 8.75 1.61 100
DSDSB-10-6 10 6 56 1.25 4.38 8.75 1.61 122
DSDSB-10-8 10 8 67 1.25 4.38 8.75 1.61 156
DSDSB-10-10 10 10 81 1.25 4.38 8.75 1.61 180
DSDSB-10-12 10 12 90 1.25 4.38 8.75 1.61 240
DSDSB-10-16 10 16 119 1.25 4.38 8.75 1.61 380
DSDSB-10-20 10 20 145 1.25 4.38 8.75 1.61 532
DSDSB-10-24 10 24 171 1.25 4.38 8.75 1.61 915

78 | nelsonwirerope.com
 BELOW THE HOOK

HATSB ADJUSTABLE TELESCOPIC SPREADER BEAM

Features
• This style of spreader beam is telescopic to accommodate
various load sizes – 2 through 15 ton capacities, adjustable
increments at 1” and 20 through 40 ton capacities, adjustable
increments at 12”.
• This style of lifter is utilized with upper rigging spread between
two lift points that adds extra stability to the lift.
• This spreader beam should be utilized where headroom is not
limited and comes standard with a pair of swivel hooks.
• Can be supplied with optional chain or wire rope top rigging.
• Engineered and manufactured to ASME B30.20 & BTH-1 Design
Category B Service Class 2.
• 100% of ALL spreader beams are Proof- Tested to 125%
capacity and certificates supplied at No Additional Charge.
• Made in USA

Options
• Higher capacities
• Additonal lengths
• Upper and lower shackle design
• Chain top rigging
• Wire rope top rigging

HATSB Adjustable Telescopic Spreader Beam

Dimensions (Inches)
Outside Chain Rigging
Capacity
Model # Spread Oblong ML Oblong ML Weight
(US Tons) Headroom Oblong ML Hook Beam & Hook
Min/Max (ft.) Opening Opening (Lbs.)
Min/Max Diameter Opening Weight (Lbs.)
Width Height
HATSB-2-4/6 2 4/6 50/60 0.63 3 6 0.91 70 9
HATSB-2-6/10 2 6/10 76/92 0.63 3 6 0.91 85 13
HATSB-2-8/14 2 8/14 101/119 0.63 3 6 0.91 175 17
HATSB-2-12/20 2 12/20 139/174 0.63 3 6 0.91 245 23
HATSB-5-4/6 5 4/6 58/67 1 3.5 7 1.36 105 34
HATSB-5-6/10 5 6/10 83/100 1 3.5 7 1.36 160 47
HATSB-5-8/14 5 8/14 107/132 1 3.5 7 1.36 205 61
HATSB-5-12/20 5 12/20 145/181 1 3.5 7 1.36 670 82
HATSB-10-4/6 10 4/6 63/72 1.25 4.38 8.75 1.61 95 49
HATSB-10-6/10 10 6/10 78/117 1.25 4.38 8.75 1.61 175 69
HATSB-10-8/14 10 8/14 113/139 1.25 4.38 8.75 1.61 460 88
HATSB-10-12/20 10 12/20 151/171 1.25 4.38 8.75 1.61 680 118
HATSB-15-4/6 15 4/6 67/76 1.5 5.25 10.5 2.08 165 78
HATSB-15-6/10 15 6/10 91/109 1.5 5.25 10.5 2.08 365 111
HATSB-15-8/14 15 8/14 117/142 1.5 5.25 10.5 2.08 478 145
HATSB-15-12/20 15 12/20 154/189 1.5 5.25 10.5 2.08 700 194
HATSB-20-7/11 20 7/11 98/112 1.75 6 12 2.27 430 175
HATSB-20-9/15 20 9/15 129/151 1.75 6 12 2.27 540 225
HATSB-20-12/20 20 12/20 159/189 1.75 6 12 2.27 822 275

215.721.9333 | 79
 CARGO CONTROL

RATCHET STRAPS
KINEDYNE GOLD STANDARD
Kinedyne ratchet straps are designed to handle most types of flatbed
tie-down requirements. Standard ratchet straps have an 18” fixed end as
standard, except for straps with 3705-2 and 3705-3 chain anchors which
have a fixed end of 32”. Special length fixed ends are available as a special
order. All ratchet straps are labeled with their working load limit to meet DOT
regulations, WSTDA, CHP and North American Cargo Securement Standards.
Straps are stenciled with the Kinedyne name and logo.

RHINO MAX
“Rhino Max” is a more durable and abrasion resistant webbing for cargo
control tie-down straps. “Rhino Web” yields 30% more tensile strength after
severe abrasion and is 30% thicker with a tougher surface. “Rhino Web”
will complement and round out Kinedyne’s already extensive line of quality
webbing. This new, durable webbing is manufactured at the state-of-the-art
Kinedyne facility in Alabama. “Rhino Web” is available in both 2” & 4”winch
straps and ratchet straps.

Flat Hook Standard Ratchet Straps

End Strap Width Working Load Limit Assembly Length Unit Weight Stock
Fittings in Inches in Pounds in Feet in Pounds No.
27 6.5 1400-250
2 3,335
30 6.7 1400-400
27 11.8 1400-1300
Flat Hook 3 5,400
30 12.1 1400-1450
27 14.7 1400-1575
4 5,400
30 15.2 1400-1580
Wire Hook 27 6.3 1400-1050
2 3,335
30 6.5 1400-1175
Wire Hook
27 14.1 1400-1600
4 6,670
30 14.6 1400-1650
27 11 1400-500
2 3,335
30 11.2 1400-650
Chain Anchor
27 15.8 1400-1500
3 5,400
30 16.1 1400-1550

Chain Extension

Rhino Max Ratchet Straps

End Strap Width Working Load Limit Assembly Length Unit Weight Stock
Fittings in Inches in Pounds in Feet in Pounds No.
27 2.8 1400-260
Flat Hook 2 4,000
30 2.9 1400-410

80 | nelsonwirerope.com
 CARGO CONTROL

WINCH STRAPS
KINEDYNE GOLD STANDARD
Kinedyne ratchet straps are designed to handle most types of flatbed
tie-down requirements. Standard ratchet straps have an 18” fixed end as
standard, except for straps with 3705-2 and 3705-3 chain anchors which
have a fixed end of 32”. Special length fixed ends are available as a special
order. All ratchet straps are labeled with their working load limit to meet DOT
regulations, WSTDA, CHP and North American Cargo Securement Standards.
Straps are stenciled with the Kinedyne name and logo.

RHINO MAX
“Rhino Max” is a more durable and abrasion resistant webbing for cargo
control tie-down straps. “Rhino Web” yields 30% more tensile strength after
severe abrasion and is 30% thicker with a tougher surface. “Rhino Web”
will complement and round out Kinedyne’s already extensive line of quality
webbing. This new, durable webbing is manufactured at the state-of-the-art
Kinedyne facility in Alabama. “Rhino Web” is available in both 2” & 4”winch
straps and ratchet straps.

Standard Winch Straps

Flat Hook
End Strap Width Working Load Limit Assembly Length Unit Weight Stock
Fittings in Inches in Pounds in Feet in Pounds No.
27 3 1400-1790
2 3,335
30 3.2 1400-1850
27 4.3 1400-2000
Flat Hook 3 5,400
30 4.7 1400-2050
27 5.0 1400-2400
4 5,400
30 5.5 1400-2450 Delta Ring
27 4.8 1400-2300
3 5,400
30 5.2 1400-2350
Delta Ring
27 6.7 1400-2750
4 5,400
30 7.1 1400-2800
27 7.0 1400-2800
Chain Extension 4 5,400
30 7.5 1400-2700

Chain Extension

Rhino Max Winch Straps

End Strap Width Working Load Limit Assembly Length Unit Weight Stock
Fittings in Inches in Pounds in Feet in Pounds No.
27 2.8 1400-2410
Flat Hook 2 3,335
30 2.9 1400-2455

215.721.9333 | 81
CARGO CONTROL

STANDARD WINCHES STORABLE WINCHES

• This standard winch can hold up • This storable winch can hold up
to 24 feet of a 4” winch strap. to 27 feet of a 4” winch strap.
• Available in both fixed and • Available in both fixed and
sliding styles sliding styles
• Working Load Limit - 5,500 lbs • Working Load Limit - 5,500 lbs

Stock Kinedyne Part Description Weight Stock Kinedyne Part Description Weight
Number Number (lbs.) Number Number (lbs.)

1100-10 1820 Fixed Standard Winch 8.0 1100-20 1820S Fixed 8.8

1100-50 3820 Sliding Standard Winch 9.2 1100-70 5820 Sliding 10.1

LOW PROFILE BOTTOM MOUNT WINCHES PORTABLE WINCH WITH 2 SET SCREWS
• This low profile winch can hold • Designed to be Permanently
up to 14 feet of a 4” winch strap. Mounted in a Fixed Position
• Available in the fixed style • Available in both standard and
low profile styles
• Working Load Limit - 5,500 lbs
• Working Load Limit - 5,500 lbs

Stock Kinedyne Part Description Weight Stock Number Kinedyne Part Description Weight
Number Number (lbs.) Number (lbs.)
1100-120 7820 Fixed 8.1 1100-40 18020P2 Standard 9.2
1100-125 7820P2 Low Profile 9.2

FORGED D-RINGS WINCH BARS

Chrome
• Includes A-clip for welding on to Used to tighten winches. Wind Plated Painted
trailers rope or nylon strapping into the
• Not to be used for lifting, they Winch with plenty of clearance.
are strictly for securing loads The bar's handle has a gripped
• Made in the USA end for better and safer handling.

Stock Diameter Inside Length Working Load Stock Kinedyne Description Length Weight
Number in Inches And Width Limit (lbs) Number Part No. (in.) (lbs.)

2200-190 1/2 2-1/4” x 2-1/2” 4,000 1100-160 37030 Standard Bar - Painted 35.0” 5.2

2200-200 5/8 3” x 3” 6,000 1100-170 37031 Standard Bar - Chrome Plated 35.0” 5.2

2200-205 3/4 3” x 3” 9,000 1100-180 37033 Combination Bar - Chrome Plated 32.0” 5.8
1100-190 10032 Combination Bar - Painted 39.5” 6.6
2200-210 1 4” x 4” 15,000

82 | nelsonwirerope.com
 CARGO CONTROL
KINEDYNE STRAP WINDERS OVERSIZE LOAD SIGNS
The Safety Flag Co Oversize Load Sign is designed to keep the road
Designed to wind straps for storage in a toolbox. This is a great tool
clear for an oversize load escort.
for all flatbeds equipped with winches. This essential tool easily recoils
straps, saves time and gets drivers back on the road quickly. • Printed on 13 oz. vinyl-laminated polyester
• Solid construction with edges hemmed for durability
• Tear and fray resistant
• 1 grommet in each corner with a 5/16 in. inside diameter

#10092 #10091

Stock Number Kinedyne Part Number Weight (lbs.) Stock Number Description Size (in.)
1100-195 10092 1.1 700-01930 Oversize Load Only 12” x 60”
1100-197 10091 2.5 9126 Reversable (Wide Load/Oversize Load) 14” x 72”

WINCH TRACK COIL RACK

1/4” x 6’ Steel Winch Track Coil Racks, also known as coil chocks or coil bunks, are used in conjunc-
tion with hardwood timbers to stabilize metal coils in the load securement
The design of the sliding winch track process.
facilitates self-cleaning for mainte- • Material: Hot Rolled Steel, 8 Gauge
nance-free operation. Winch track is • Finish: Painted Black
for use with Kinedyne sliding winches • Size: 33.25” long x 2.75” wide x 2.85” high
only (part numbers 3820 and 5820).
Track can be capped on ends or
cross-bolted for security. Special
length track is available.

Stock Number Kinedyne Part Number Weight (lbs.) Stock Number Kinedyne Part Number Weight (lbs.)

1100-140 3606 38.5 1700-1775 8856 4.9

CORNER PROTECTORS PROTECTIVE SLEEVES

Designed for winch and ratchet straps
in different sizes Protective sleeves are designed to protect both strap and cargo from
Corner protectors are designed to protect both strap and cargo from damage caused by the load. Select styles can also be used on web
damage caused by the load. They are required by law whenever load slings, wire rope slings, and chain slings.
conditions could cut or abrade the strap. Protectors feature a corner
recess to protect cargo edges.

Rubber Nylon

Steel
Plastic
Stock Kinedyne Part Item Weight Each
Number Number Description (lbs.)
Stock Kinedyne Part Item Weight 1100-280 37022 Rubber Sleeve 2”-3” 0.2
Number Number Description Each (lbs.)
1100-290 37024 Rubber Sleeve 4” 0.5
1100-258 1863 Steel 2” 1.2
1100-310 CS20 Nylon Sleeve 2” 0.2
1100-300 37025 Plastic 2”-4” 0.2
1100-330 CS40 Nylon Sleeve 4” 0.5

215.721.9333 | 83
CARGO CONTROL

2” LOGISTIC STRAPS WITH SPRING FITTINGS

Kinedyne's Logistic Straps are designed to provide solutions to most interior van loading challenges. These versatile
straps are offered in several lengths with buckle and end fitting options to fit every job.

Ratchet Cam

Stock Buckle Assembly Length Breaking Strength Rated Capacity Unit Weight
Number Type in Feet in Pounds in Pounds in Pounds
1400-8320 Ratchet 12 3,000 1,000 3.2
1400-8330 Ratchet 16 3,000 1,000 3.3
1400-8340 Ratchet 20 3,000 1,000 3.4
1400-8370 Cam 12 2,500 835 1.6
1400-8380 Cam 16 2,500 835 1.7
1400- Cam 20 2,500 835 1.8

LOGISTIC TRACK
• Material: High strength steel 12 gauge
• Minimum Yield: 50,000 psi.
• Finish: Gray, Powder Coat
• Length: 10 feet., 3 meters.

Stock Number Kinedyne Part Number Item Descrption Unit Weight

1100-370 43002 Series E 12GA 10’ 16.2 lbs.

KINEDYNE SAF-T-LOK BARS

Kinedyne's Saf-T-Lok Bars are reliable and easy to operate in all environments. With pivoting
rubber feet that won't scuff and remain pliable even at low temperatures. The handle and trigger
release are easy to operate even with gloved hands.

Stock Number Kinedyne Part Number Descrption Unit Weight

1100-340 10088 Aluminum (90” - 105”) 8.5
1100-345 10085 Steel (90” - 105”) 11.4
1100-348 80131 Retract-A-Bar (54” - 107”) 9.0

84 | nelsonwirerope.com
 CARGO CONTROL

1” HEAVY DUTY RATCHET & UTILITY STRAPS

These general purpose utility straps are made from 1” wide webbing and
include heavy duty hardware. Common uses include securing cargo,
motor sport vehicles, wood, furniture, and more. Several end-fittings are
available including wire hooks, vinyl coated wire hooks, and vinyl coated
s-hooks.

Features
• Durable webbing
• Heavy duty hardware
• Strong and smooth ratchet
• Anti-fatique ratchet handle
• Made in the USA

Wire Hook
Vinyl Coated
Vinyl Coated S-Hook Wire Hook

Stock Product Working Load

Number Description Limit (lbs.)

1400-50 Utility Strap with Vinyl S Hooks - 6 ft. 400

1400-75 Utility Strap with Vinyl S Hooks - 9 ft. 400

1400-80 Utility Strap with Vinyl S Hooks - 15 ft. 400

1400-90 Ratchet Strap with PVC Wire hook - 10 ft. 800

1400-100 Ratchet Strap with Wire Hooks & D Ring - 16 ft 835

1400-130 Ratchet Strap with Vinyl S Hooks - 9 ft. (Blue Strap) 500

1400-150 Ratchet Strap with Vinyl S Hooks - 16 ft. 800

1400-155 Ratchet Strap with Vinyl S Hooks - 15 ft. (Blue Strap) 500

RUBBER TARP TIES POLYETHYLENE TARPS

Our tarps are made from the finest materials, and by the finest factories
• 100% natural rubber tarp straps around the world. All of our tarps are UV protected and rot proof for
• 9″ , 15″ , 21″, 31″ and 41″ strap lengths increased durability. Each tarp has rust proof grommets spaced 3 feet
available apart, perfect for any tie down application. We carry a light duty Blue
• Uncrimped steel S hooks tarp as well as a heavy duty Green/Black tarp.
(can be removed)
• Quantity 50 per box
• Bundles of 10 available upon request
• Made in the USA

Size in Feet Regular (Blue) Heavy Duty (Green & Black)

10 x 12 1400-2850 1400-2900
Stock Strap Length Overall Length
Quantity Per Box
Number in Inches in Inches 10 x 20 1400-2950 1400-3000
1400-3550 9 14 50 15 x 20 1400-3050 1400-3100
1400-3600 15 19 50 15 x 30 1400-3150 1400-3200
1400-3650 21 25 50 20 x 30 1400-3250 1400-3300
1400-3700 31 35 50 20 x 40 1400-3350 1400-3400
1400-3750 41 45 50 30 x 40 1400-3450 1400-3500

215.721.9333 | 85
SYNTHETIC ROPE
MANILA ROPE
• Natural Fiber Rope made from the finest Philippine Abaca available
• High Abrasion Resistance
• Stretch Resistence
• Meets tensile Fed. Spec. TR605

Stock Size Standard Length Weight of Reel Breaking Strength Work Load Limit
Number in Inches in Feet in Pounds in Pounds in Pounds

1900-10 1/4 1,250 25 540 54

1900-110 5/16 850 25 900 90

1900-210 3/8 600 25 1,215 122

1900-410 1/2 600 45 2,385 265

1900-610 5/8 600 83 3,960 495

1900-710 3/4 600 100 4,860 694

1900-810 1 600 162 8,100 1,160

BRAIDED CABLE PULLING ROPE

High force composite double braided rope with hand spliced eyes on
both ends.

• Comes on a heavy-duty Amish wood spool for smooth dispensing from a cable pull stand
• Constructed of low-stretch polyester that will not snap back when load is relieved, eliminating the risk of serious injury
• Meets 4 to 1 standard for tensile strength, ensuring safety in high-tension commercial and industrial applications
• Compatible with most pulling machines for increased ease of pulling
• Slick fabric is easy on the hands and slides through rough areas with ease
• Cable lubrication recommended for increased viscosity in high traction areas

Stock Size Standard Length Work Load Limit Break Strength Weight in Pounds
No. in Inches in Feet in Pounds in Pounds Per Reel
1900-5030 1/2 300 2,510 2,510 22.8
1900-5020 1/2 600 2,510 2,510 45.6
1900-5015 1/2 1,200 2,510 2,510 91.2
1900-5050 9/16 300 3,070 3,070 28.5
1900-5040 9/16 600 3,070 3,070 57.0
1900-5035 9/16 1,200 3,070 3,070 114.0
1900-5070 5/8 300 3,830 3,830 36.0
1900-5060 5/8 600 3,830 3,830 72.0
1900-5055 5/8 1,200 3,830 3,830 144.0
1900-5090 3/4 300 6,430 6,430 50.1
1900-5080 3/4 600 6,430 6,430 100.2
1900-5075 3/4 1,200 6,430 6,430 200.4
1900-5110 7/8 300 7,535 7,535 71.1
1900-5100 7/8 600 7,535 7,535 142.2
1900-5095 7/8 1,200 7,535 7,535 284.4
1900-5130 1 300 10,050 10,050 93.0
1900-5120 1 600 10,050 10,050 186.0
1900-5115 1 1,200 10,050 10,050 372.0
1900-5145 1 1/8 300 12,525 12,525 108.3
1900-5140 1 1/8 600 12,525 12,525 216.6
1900-5135 1 1/8 1,200 12,525 12,525 433.2

86 | nelsonwirerope.com
 SYNTHETIC ROPE

POLYPROPYLENE ROPE
Yellow rope is a floating, resistant to oil, gas and most chemicals. Polypropylene is rot
proof, waterproof and has good resistance to abrasion. Poly has little stretch and good
recovery rate. Poly is used in marine, industrial, sports, farm and home.

• Used for boating, camping, anchoring, docking, and more

• Floats
• Resistant to chemicals and rot
• UV resistant
• Available in a variety of colors

Stock Size Standard Length Weight of Reel Breaking Strength Work Load Limit
Number in Inches in Feet in Pounds in Pounds in Pounds

1900-1310 1/4 600 7 1,250 190

1900-1300 1/4 100 1.5 1,250 190

1900-1510 5/16 600 11 1,900 190

1900-1710 3/8 600 17 2,700 270

1900-1700 3/8 100 2.8 2,700 270

1900-1810 1/2 600 28 4,200 467

1900-1790 1/2 100 4.7 4,200 467

1900-2010 5/8 600 45 6,200 775

1900-2210 3/4 600 64 8,500 1,214

1900-2410 1 600 108 14,000 2,000

NYLON ROPE
Solid Braided Nylon Rope is provided on an easy to use reel convenient for storage.
Solid braided rope strands all travel in the same direction, clockwise or counter clock-
wise, and alternate between forming the outside and inside of the rope. This construc-
tion is popular for general purpose utility rope. As a lock stitch constructed rope with
a smooth appearance and small vertical picks, it is extremely strong and cannot be
unraveled, even when cut.

• Ideal for universal use

• Flexible, strong and durable
• Resistant to mildew, rot, and chemicals
• High resistance to abrasion

Stock Size Standard Length Weight of Reel Breaking Strength Work Load Limit
Number in Inches in Feet in Pounds in Pounds in Pounds

1900-2910 1/4 600 9 1,650 138

1900-2900 1/4 100 1.5 1,650 138

1900-3010 5/16 600 15 2,550 213

1900-3110 3/8 600 21 3,700 308

1900-3105 3/8 100 3.5 3,700 308

1900-3210 1/2 600 39 6,400 582

1900-3205 1/2 100 6.5 6,400 582

1900-3410 5/8 600 63 10,400 1,040

1900-3610 3/4 600 87 14,200 1,578

1900-3810 1 600 158 25,000 2,778

215.721.9333 | 87
SERVICES

SLING REPAIRS
If any of your slings or assemblies appear to be
damaged, we will inspect them and replace any
components that are no longer safe to use. Each
sling will be proof tested to twice its working load
limit and test certificates will be provided. You can
also send in hooks and components used on previ-
ous assemblies and slings to reduce costs.

ON-SITE SLING INSPECTIONS

We will send one of our qualified rigging inspectors
to your job site to inspect any or all of your wire
rope and chain slings. We will check each sling
for damage and we will flag any slings that should
be taken out of operation or repaired before used
under load. Upon completion, you will recieve a full
report of your all of your slings.

ON-SITE RIGGING TRAINING COURSE

If your company is looking for more training on
rigging basics or rigging inspection, we will send
one of our rigging trainers to your location to give
a 30 to 45 minute powerpoint presentation. We
will bring actual slings and hardware that failed an
inspection so you can see real world examples of
common problems.

88 | nelsonwirerope.com
 SERVICES

PROOF TESTING SERVICES

If you would like your slings tested, we have a
proof testing machine designed to pull a sling to
twice its rated capacity. This ensures that the sling
was made properly and is safe for use in the field.
Certifications are provided for your records.

TRUCK DELIVERY SERVICES

We offer full time delivery service for orders that
are too large, too heavy, or too expensive to ship
via UPS. Our primary delivery area includes
Pennsylvania, New Jersey, and Delaware. If an
order needs to be shipped outside of the Tri-State
area, we will also ship via common carrier.

TRUCK WINCH CABLE REPAIR

We know that time is valuable, so if you have a
truck with a damaged winch cable or end fitting,
bring it over to our shop and we can resplice the
cable, replace any damaged end fittings such as
hooks and thimbles and get you on your way
without having to remove the entire cable from
your winch.

215.721.9333 | 89
 Every effort has been made to ensure that the information in this book is accurate. Nelson Wire Rope Corporation is not
responsible for printing or clerical errors.

The Nelson Wire Rope logo is a trademark of Nelson Wire Rope Corporation. Use of the Nelson Wire Rope logo for com-
mercial purposes without the prior written consent of Nelson Wire Rope Corporation may constitute trademark infringement and unfair
competition in violation of federal and state laws.

Disclaimer and Terms of Use: Your reliance upon information and content obtained by you at or through this publication is
solely at your own risk. Nelson Wire Rope Corporation assumes no liability or responsibility for damage or injury to you, other persons,
or property arising from any use of any product, information, idea, or instruction contained in the content or services provided to you
through this catalog. Reliance upon information contained in this material is solely at the reader’s own risk. Nelson Wire Rope
Corporation has no financial interest in and received no compensation from manufacturers of products mentioned in this book.

Resources for lifting and safety use information:

• U.S. Department of Labor O.SH.A (800)-321-OSHA x6742
• National Safety Council (800)-621-7615
• Commercial Vehicle Safety Association (800)-444-2973
• Web Sling & Tie Down Association (443)-640-1070 x110
• ASME B30.9 (Slings)
• ASME B30.10 (Hooks for lifting)
• ASME B30.20 (Below the hook lifting devices)
• ASME B30.26 (Hardware)

Safe working load, working load limit, and rated capacity, indicate maximum loads. Ratings apply to straight line pull unless
otherwise specified. All ratings shown are based on new product used in normal operating conditions. Special considerations must be
given to item selection when unusual conditions can be expected. Products are subject to wear, misuse, overloading, and deformation,
which may result in a
reduction of working load limit. We highly recommend that all products be regularly inspected. Worn or deformed items should be
removed from service immediately.

It is the responsibility of the user to determine the suitability of a product for any particular use. Nelson Wire Rope
Corporation is not responsible for damages resulting from misuse or misapplication of any product made by Nelson Wire Rope
Corporation or distributed by Nelson Wire Rope Corporation.
Refer to all applicable industry, trade association, federal, state, and local regulation. Read all operating
instructions and warnings carefully.
Nelson Wire Rope Corp.
3051 Penn Street
Hatfield, PA 19440 USA

215.721.9333
[email protected]
nelsonwirerope.com

Copyright © 2020 Nelson Wire Rope Corp. All rights reserved.