A B C D E F G H I J K

Extend for future

NOTES:
9 8 7 6 expansion.
1> Read this drawing along with architectural & structural
drawing.
3-25Ø(cut) 1 2-20Ø(Thr) 4-20Ø(cut) +23'-0" 3-25Ø(cut) 2-20Ø(Thr) 2 2> Do not scale, follow written dimensions only.
1 3> All dimensions & levels shall be checked & co-related with
relevant architectural & structural drawing & in case of
ambiguity the matter shall be brought to the notice of
the consultant before starting the work.
2-25Ø(cut) 4> Grade of concrete to be used - M20 (MIX 1:1:3).
3-25Ø(Thr) 2-25Ø(cut) 3-25Ø(Thr)
B2 5> Ø for 6mm dia bars indicates for steel with Fy=250 N/sq.mm
S4 S3 S4 S3 Ø for other dia rein. indicates for TMT bars with Fe=500N/sq.mm
(6"x24") (6"x24") 2
1 (14"x24") 6> Clear cover:- (a) Roof Slab - 15mm (b) Beams - 25mm
f 7> Not more than 50% of bars shall be lapped at any section.
(10"x24")

b f Lap length shall not be less than 49 times the dia.

(10"x24")

Rein detail of beam Along Grid A (12"x24") Top at +34'-3" Rein detail of beam Along Grid B (14"x24") Top at +34'-3"
b
(12"x24")

of smaller bar.
(6"x24")

8> Lap should be avoided in following cases :-

Top bars - near support Bottom bars - near mid span
A A 2-25Ø(Thr) 3-25Ø(cut) 1-16Ø(cut) 3-16Ø(Thr) 9> Wherever necessary sufficient chairs @ 2'-6" shall be
(12"x24") (12"x24") (10"x24") 3-25Ø(cut)
provided tosupport the top reinforcement.
10>Thickness of all slabs are 5" (INCHES )
Beam at Landing Lv. unless noted otherwise.
Beam top at 11>Water curing must be done at least for 21 days.
2
(12"x24")

(10"x24")

34'-3" lv. 12>All concrete shall be machine mixed and machine vibrated.
g 3-25Ø(Thr) 2-25Ø(cut) 3-20Ø(Thr) 13>All dimensions are in feet and inches unless noted
g otherwise.
S3 S3 S2 S2
14>Binders for extra top of slab rein. shall be 8Ø @ 12"c/c.
g
c Axis Axis
(6"x24")

Rein detail of beam Along Grid D (14"x24") Top at +34'-3" Rein detail of beam B1 (10"x24")
c
g
c 2-20Ø(Thr) 3-20Ø(cut) 2-16Ø(Thr)
3-25Ø(cut) 3-20Ø(cut)
57" 55
c
B5
a
A' A' 10T@100C/C
3-20Ø(Thr)
S3
2-20Ø(cut) 27" 2-20Ø(cut)
S2
2-16Ø(Thr)
S2
S3 S4
(10"x28")

Beam top at
(10"x24")

3 34'-3" lv. (10"x24")

Beam top at
(10"x24") (10"x24") (12"x24") (12"x24")
34'-3" lv. Axis Axis
B B1 DN b B Rein detail of Beam Along Grid 9 (10"x24") & (12"x24")Top at +34'-3"
Rein detail of beam B2 (6"x24")
(14"x24") (14"x24")
B' B' INDICATES FOR TOP LAYER REIN.
C C
5"Thk 3-25Ø(cut) 2-25Ø(Thr) 4-25Ø(cut) +23'-0"
(10"x24") 3-25Ø(cut)
SLAB INDICATES FOR BOTTOM LAYER REIN.
(10"x24")

(10"x24")

Beam top at
34'-3" lv.
(10"x24")

(10"x24")

B3 g
slab proj. from beam
10 Ø @ 10" c/c (extra top)
top & bottom as/sec. C-C 3-20Ø(Thr) 2-20Ø(cut)
2-25Ø(cut) 3-12Ø(Thr)
col. rein. f 10 Ø @ 12" c/c (extra top)
c c 10T@100C/C S3 S3 S4 as/detail
(6"x24")

g Beam top at (10"x24") (10"x24") 3-25Ø(Thr)

(10"x28") (10"x24") e 10 Ø @ 14" c/c (extra top)
g c
c 34'-3" lv.
Beam rein. d 10 Ø @ 4"c/c
4 c Rein detail of Beam Along Grid 7 (10"x24") & (10"x28") Top at +34'-3" as/detail
c 10 Ø @ 5"c/c
3-20Ø(cut) 2-20Ø(Thr) 3-20Ø(cut) 3-20Ø(cut) +23'-0"
b b 10 Ø @ 6"c/c
a 10 Ø @ 7"c/c

Ld
g g g Symbol Spacing
2-20Ø(cut)
10T@100C/C S3 S3 Confirming Links
1 set # 10Ø)
D (14"x24") (14"x24") (14"x24")
D
Rein detail of Beam Along Grid 6 (10"x24") Top at +34''-3" END 2-20Ø(thr)
(10"x24")

(10"x24")
COLUMN
(10"x24")

(10"x24")

Beam top at
(6"x24")

4-20Ø(cut) 2-20Ø(Thr)
34'-3" lv. a 3-20Ø(cut) 3-20Ø(cut)
Beam top at
5
34'-3" lv.
(10"x24") (10"x24") (10"x24") (10"x24") {TYP. DETAIL OF BEAM. &
B4 2-20Ø(cut) 2-20Ø(cut) COLUMN JUNCTION} 2-25Ø(cut)
3-20Ø(Thr)
10T@100C/C S3 S3 S4
Beam Axis Axis Axis 2-20Ø(thr)
Rein detail of beam B3 (10"x24") 3-25Ø(thr)
2-16Ø(Thr)
Detail 2-2(14"x24")
3-25Ø(cut)
2-25Ø(cut) 02
2-16Ø(Thr) 01
6 tata blue sheet S4 S3 S3 S4 no. date particular passed
revision
E E Axis Axis
Rein detail of beam B5 (10"x24")
Axis
3-25Ø(thr) PROJECT:
Proposed PRESS BUILDING for
Detail 1-1(12"x24")
PRABHAT KHABAR
at MUZZAFARPUR (BIHAR).
SHEET TITLE:
CLIENT:
SLOPE 1:6 s4 8 Ø @ 5" c/c(cantilever end)
NEUTRAL PUBLISHING HOUSE LTD.
stirrups as/detail RANCHI
7 9 8 7 6 s3 8 Ø 2LVS @ 6" c/c + 8 " c/c + 6" c/c ARCHITECT & CONSULTANT:
s2 8 Ø 2LVS @ 7" c/c + 9" c/c + 7" c/c HINDUSTAN BHAWAN, MAIN ROAD, RANCHI-834001. PH:2304496
SCALE: 1"= 6' DWG NO.: M341-09 N
3-16Ø(Thr) s1 8 Ø 2LVS @ 8" c/c +10" c/c + 8" c/c DRAWN BY: LAIBA ALI DATE: 07-01-2025
upto 0.3L from middle upto 0.3L from CHECKED BY: MANOJ KUMAR DEALT BY: RAZI ANSARI
support zone support
e-mail : [email protected]
structural consultant:
S HE ET T ITLE:
Symbol Spacing of shear rein. website:www.computerfoundation.co.in
DRG. NO. - S HE ET NO. :-
S CA LE -1"=8'-0"
DEA LT BY:-
BEAM SLOPE 1:6 BEAM
DRA WN BY :-
COMPUTER FOUNDATION Pvt Ltd.
R ITU CH AD DA B IBIYANA
R AJ IV C HADDA
TYP. HOOK DETAIL S4
3-16Ø(Thr)
S3 S3 S3 LEGEND H.O.:(opp Tapasya Complex)Boring Road,Patna-1.ph:2260729, 9835047253
8 TYP. DETAIL OF BEAM TO BEAM JUNCTION KEY PLAN B.O.:3rd Floor(SATABDI TOWER)Sakchi,Jamshedpur-1.ph:2421707
OF STIRRUP B.O.:6th Floor(HARI OM TOWER) Circular Road,Ranchi-1 ph:2563456
Axis Beam Axis Axis
Rein detail of beam B4 (10"x24") Rev.
NOTICE:
THIS DRAWING IS THE PROPERTY OF COMPUTER FOUNDATION PVT LTD AND MUST BE RETURNED ON REQUEST.
IT IS SUBMITTED AS CONFIDENTIAL INFORMATION FOR CONSTRUCTION OF THIS PROJECT.
IT IS NOT TO BE USED FOR ANY OTHER PURPOSE NOR MAY BE COPIED
OR LENT WITHOUT PERMISSION OF OUR AUTHORITY IN WRITING.