9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay

HOTLINE: 0086-0577-62659558

Home About Us Products Certificates Download Video News Network Contact Us Search

Products List
Product
Inductive Proximity Sensor
HEYI Electrical Co., Ltd. > Product
Plug-in Proximity Sensor

Capacity Proximity Sensor Inductive Proximity Sensor LJ12A3

Photoelectric Sensor Advantages:

1) Compact volume, Diversified exterior
Light Curtain Sensor
2) High precision of repeated location
Color Sensor
3) Good performance of anti-interference

Solid State Relay 4) High on-off frequency, Wide voltage range

5) Dust proof, vibration proof, water proof and oil proof

PCB Relay
6) With short-circuit protection and inverted connecting protection
Time Relay

General Purpose Relay Specification:

High Power Relay

Automotive Relay

Dimension
Popular Products

Detection distance 2mm

NO LJ12A3-2-Z/BX / LM12-3002NA

DC NPN NC LJ12A3-2-Z/AX / LM12-3002NB

6 NO+NC LJ12A3-2-Z/CX / LM12-3002NC

～ NO LJ12A3-2-Z/BY / LM12-3002PA

36 PNP NC LJ12A3-2-Z/AY / LM12-3002PB

Flush V NO+NC LJ12A3-2-Z/CY / LM12-3002PC

two wire NO LJ12A3-2-Z/EX / LM12-3002LA

system NC LJ12A3-2-Z/DX / LM12-3002LB

AC NO LJ12A3-2-J/EZ / LM12-2002A
SRC Control
90 NC LJ12A3-2-J/DZ / LM12-2002B
label silicon
～250 NO+NC

V Relay output

Non- Detection distance 4mm

flush NO LJ12A3-4-Z/BX / LM12-3004NA

NPN NC LJ12A3-4-Z/AX / LM12-3004NB

DC NO+NC LJ12A3-4-Z/CX / LM12-3004NC

6 NO LJ12A3-4-Z/BY / LM12-3004PA

～ PNP NC LJ12A3-4-Z/AY / LM12-3004PB

36 NO+NC LJ12A3-4-Z/CY / LM12-3004PC

V two wire NO LJ12A3-4-Z/EX / LM12-3004LA

system NC LJ12A3-4-Z/DX / LM12-3004LB

AC SRC Control NO LJ12A3-4-J/EZ / LM12-2004A

90 label silicon NC LJ12A3-4-J/DZ / LM12-2004B

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 1/6
9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay
～250 NO+NC

V Relay output

DC 200mA
Control output
SCR/Relay 300mA

Output voltage drop DC/AC DC<2V DC(Two wire system) <3.9V AC<10V

Consumption current DC<15mA AC<10mA

Standard detected object 15×15×1(A3 iron)

Repeated precision 0.01

DC/AC Response frequency 400Hz/25Hz

Working environment temperature ～

–25℃ 75℃

Insulation resistance ≥50MΩ

Shell material Metal

Protection grade IEC standard IP67

Altemative model at home and abroad E2E-X5M□

Series connection and parallel connection:

Explanation of technical terms:

Detection distance Setting distance Standard detected object

Including the effects like temperature and voltage, Take as standard detected object to detect
Move the detected object according to assigned
without error action the distance passed through the basic performance. the shape, size and
method, the distance from the reference

position (reference plane)to the detecting from the practical detection surface to the objected material have been determined.

action(resetting) object.

Differential distance Response time Response frequency

Work out the tracking output times per second by

The absolute value of the distance difference TI:when the objected object enters the action repeatedly approaching the detected object
between the distance to action and the distance To
Brief detection method sees the above diagram
resetting zone, the time from proximity sensor being in

action state to output appearance.

T2:the time from leaving action zone
to output disappearance.

Main features:

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 2/6
9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay
Take high frequency oscillation type proximity sensor(front detector)as representative example to briefly explain general features of proximity switch.

Item Explanation Features

◆ About detected object

The size of If the detected object is square metal sheet When the detected object
detected with constant thickness (t=1mm), detect at is bigger than standard

object and detection distance X when change its side detection distance is When the material of detected

detection length dmm. constant. According to object is non magnetic metal,

distance different Machine type, the distance of action should

X(mm)
sometimes the features descend. But when the foil

will that mentioned on material is approximately

the left. To through thicker than a.01mm,the

type, the detection detection distance will be the

object is like cylinder same as that of magnetic object

metal bar If the film plating is extremely

thin or non-conductive,

detection cannot be conducted.

The effect of cladding material,

take note of the changing of

detection distance.

◆ About ambient weather

In order to maintain reliable
action and long service life,
Detect at detection distance Xmm(front detector)when please avoid
The For more than 1mm thick
change the thickness of the assigned standard detected the(outdoor)occasion beyond the
thickness object 1mm. magnetic metal like iron stipulated ambient temperature.
of detected on the main, the Do not drench it with Water or
water-soluble cutting lubricant
object and detection distance will
when it is used with cover,
detection not change. although the proximity sensor is
distance waterproof. Do not used in the
occasions with chemical agents,
especially strong base acid,
nitric acid, hot strong sulfuric
acid and so on.

◆ About maintenance and

overhaul
In order to keep the proximity
sensor to work stably for long
time, the following regular
examinations should be performed
The effects resulted from
The effects Because the detection to standard detected
detection distance and cladding just like general control.
resulted object will be effected by its shape, material of the metal excluded 1. Check the installation
iron will be different according to position of detected object and
from the size, material, and various cladding
different machine type On the
proximity sensor if any
Thickness material, confirm through detection main, the machine type which
deviation, loosening or
detects all the metals will not be
of detected distance Xmm measurement. effected by cladding material. deformation exists.
2. Check the attached wires
object and
and connecting parts if any
cladding
loosening bad contact or wire
material breaking off exists
3. Check if there is any
metallic powder accumulation or
not
4. Check if the temperature
condition and surrounding
environment condition are normal
or not
5. Check if the detection
distance is normal or not

Correct use, installation and cautions:

◆Mounting screw switch ◆ Mounting non screw type pillar switch

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 3/6
9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay
◆ Do not tighten with over-torque when ◆ When adopt adjusting screw, the
mounting the switch. Adopt toothed washer when tightening tightening torque should be within 2-4kgf-cm

◆ Protection against the interference ◆ Protection against mutual interference between

of non detected object switches
◆ When mounting the proximity switch on the metal part, ◆ Mount according to the size which is
do refer to the following diagram. Remain a certain space bigger than that in the following diagram

in advance according to the shown diagram so to prevent the switch from error action
as to prevent the switch from error action resulted from mutual interference if mount the
switches contra-positively or in parallel

◆ Adjustable switch action distance(sensitivity) ◆Guard of switch lead-wire

◆ The action distance(sensitivity)of proximity switch ◆ When mount switch, fix the lead-wire

can be adjusted by the means of trimming at a distance about 10cm from the switch with
potentiometer. Increase the action distance wire clip so as to prevent the switch lead-wire from
and reduce sensitivity when turn clockwise. damage from outer force

Vice versa. Do not use in the critical state of

max. action distance.

■ Cautions
◆DC switch should adopt insulation transformer and ensure stable voltage mains corrugation.
◆IF any electric power line or dynamic line passes through the surrounding of switch lead-wire, in order to

prevent the switch

from damage or error action, cover the metal bushing on the switch lead-wire and ground it to the earth.

◆Set the switch use distance within the rated distance to avoid the effects from temperature and voltage
◆Wiring while power-on is strictly prohibited. Connecting the wires strictly according to the wiring
diagram and output

return elementary diagram.

◆If there are any special requirements to the switch like water proof, oil proof, acid proof, base proof, high

temperature proof
or with any other specifications, the users are required to give clear indication when placing an order. We can
produce accord

-ing to the requirements of the use.

Application illustration of proximity switch:

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 4/6
9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay

Inquiry Form
Products Images:

Produt: Inductive Proximity Sensor LJ12A3

Full Name: *

Address:

Phone:

Email Address: *

Message:

Upload Photos: Choose File No file chosen

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 5/6
9/16/2020 Inductive Proximity Sensor LJ12A3_Inductive Proximity Sensor_Photoelectric Sensor_Capacity Sensor_Solid State Relay_PCB Relay_Timer Relay

Inductive Proxi… Plug-in Proximi… Capacity Proxim… Photoelectric S… Light Curtain S…

Inductive Proximity S… Plug-in Proximity Sen… Capacity Proximity Se… Photoelectric Sensor … Light curtain sensor …
Inductive Proximity S… Plug-in Proximity Sen… Capacity Proximity Se… Photoelectric Sensor … Light curtain control…
Inductive Proximity S… Plug-in Proximity Sen… Capacity Proximity Se… Photoelectric Sensor … GB Mounting brackets
Inductive Proximity S… Plug-in Proximity Sen… Capacity Proximity Se… Photoelectric Sensor …
Inductive Proximity S… Plug-in Proximity Sen… Capacity Proximity Se… Photoelectric Sensor …

Contact Us
Tel：86-577-62659558
Fax：86-577-61712987
E-mail：
[email protected]

@Copyright © YueQing HEYI Electrical Co,Ltd. All Rights Reserved.站长统计 浙ICP备15043934号

www.control-electrical.com/Catalogue/Inductive_Proximity_Sensor_LJ12A3-397.html 6/6