Scribd
Upload
13 views2 pages

Industrial Drives and PLC (Mid Term) (15-04-25) (Objective) )

This document is a mid-term exam for the BS(EET) program at Mir Chakar Khan Rind University of Technology, focusing on Industrial Drives and PLC. It consists of multiple-choice questions assessing knowledge on PLC programming, power supply, advantages, and differences between PLCs and other systems. The exam is designed for a duration of 60 minutes and carries a total of 30 marks.

Uploaded by

Syed Junaid Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
13 views2 pages

Industrial Drives and PLC (Mid Term) (15-04-25) (Objective) )

This document is a mid-term exam for the BS(EET) program at Mir Chakar Khan Rind University of Technology, focusing on Industrial Drives and PLC. It consists of multiple-choice questions assessing knowledge on PLC programming, power supply, advantages, and differences between PLCs and other systems. The exam is designed for a duration of 60 minutes and carries a total of 30 marks.

Uploaded by

Syed Junaid Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MIR CHAKAR KHAN RIND UNIVERSITY OF TECHNOLOGY, DERA GHAZI KHAN

Department of Electrical and Electronics Technology


Mid Term Exam (Spring 2025)
th
BS(EET), 6 Semester Cr.Hour 2+2 Industrial Drives and PLC
Teacher Name: Engr. Hassaan Bin Umar Max Marks: 30 (ET-384)
Time: 60 min
Student Name:- Roll.No:- __________

Q. N0. 1: Encircle the correct answer. (1*10) = 10 marks (CLO-2, PLO-1, C-1)

1. What type of programming language is typically used to program a PLC?

a) C++ b) Java
c) Ladder Logic d) Python

2. How many maximum input and output points does a high-end PLC have?

a) 8 input, 8 output b) 16 input, 16 output


c) 32 input, 32 output d) 64 input, 64 output

3. What type of power supply is typically used for a PLC?

a) AC b) DC
c) Both AC and DC d) Solar

4. What is the function of a PLC’s power supply?

a) To provide power to the PLC’s CPU b) To provide power to the PLC’s input/output modules
c) To provide power to the PLC’s communication interfaces d) All of the above

5. What are the inputs and outputs in a PLC system?

a) Sensors and actuators b) Motors and gears


c) Valves and pumps d) Programs and data

6. What are the advantages of using a PLC in industrial automation?

a) Cost-effective, reliable, and flexible b) High speed, high accuracy, and low maintenance
c) Easy to program, easy to install, and easy to use d) All of the above

7. What is the difference between a PLC and a DCS?

a) PLCs are used to control machines while DCSs are used to control entire plants
b) PLCs are used to control machines while DCSs are used to control networks
c) PLCs are used to control machines while DCSs are used to control buildings
d) PLCs are used to control machines while DCSs are used to control vehicles

8. What is the difference between a PLC and a microcontroller?

a) PLCs are used for industrial automation while microcontrollers are used for consumer electronics
b) PLCs are used for industrial automation while microcontrollers are used for computer peripherals
c) PLCs are used for industrial automation while microcontrollers are used for robotics
d) PLCs are used for industrial automation while microcontrollers are used for automotive systems
MIR CHAKAR KHAN RIND UNIVERSITY OF TECHNOLOGY, DERA GHAZI KHAN
Department of Electrical and Electronics Technology
Mid Term Exam (Spring 2025)
th
BS(EET), 6 Semester Cr.Hour 2+2 Industrial Drives and PLC
Teacher Name: Engr. Hassaan Bin Umar Max Marks: 30 (ET-384)
Time: 60 min
Student Name:- Roll.No:- __________

9. How does a PLC handle multiple inputs and outputs?

a) By using a single input/output (I/O) module


b) By using multiple input/output (I/O) modules
c) By using a single input module and multiple output modules
d) By using multiple input modules and a single output module

10. How is a PLC program stored?

a) On a hard disk b) On a USB drive


c) On a memory chip d) On a flash memory

You might also like