April 1998 Bulletin 40:002

Rotary Valve Selection Guide

The following charts are presented to help you under- several rotary valve types to provide digital control and
stand the wide range of types, applications and sizes remote diagnostics. For further information on any of
of Fisher Controls Rotary Valves. ENVIRO-SEALR the Fisher Controls valves or accesories mentioned in
packing systems are available to help ensure com- this guide, please consult your Fisher Controls sales
pliance with environmental emissions requirements. office or sales representative.
FieldvueR digital valve controllers are also available on

W6539 W7031 1 W7032 1

V260 8532 9500

W7033 1 W7034 1 W7035 1

V200 V300 V150

W5476 W7036 1 W7037 1 W6957

W7038 1/IL
A11 V500 CV500 A41 (PSP)

Figure 1. Selection of Rotary Valves

Bulletin 40:002
V-Line Valves
V150 V200 V300 V250 V260 CV500 V500
Style and Application
Ball valve for gas Cam Vee Ball
R
R
Hi Ball heavy and liquid that valve for erosive Eccentric Plug
R
Vee-Ball valves with V notch for fibrous slurry, liquid, gas reduces noise and
duty valve for gas and severe service valve for erosive
and steam that require high capacity and rangeability transmission lines cavitation with that requires high and severe service
or liquid pipelines special energy capacity and
dissipating trim rangeability
End Connection / Pressure Class
Wafer or flanged / Wafer or flanged /
Flanged / Class Wafer / Class 150, Flanged / Class Wafer / Class 600 Flanged / Class
Class 150, 300 or Class 150, 300 or
150 300 or 600 300 or 900 300 or 600
600 600
Sizes
1-20” 1-10” 1-20” 4-24” 8-24” 3-12” 1-8”
Valve Body Material
Steel or Stainless
LCC Steel or
Steel WCC Steel, Stainless Steel (S31600) or
Steel, S31600 Stainless Steel or Special Alloys Stainless Steel
(S31600,S31700, Special Alloys
(S31600)
Duplex)
Seal Material
S31600 Stainless S31600 Stainless
Steel or C8M with Steel with or
Fisher TCM Plust , Fisher TCM Ultrat, Flat Metal, HD Metal Delrin or
Delrin or Flow Ring or without CoCr-A without CoCr-A
(heavy duty), Flow Ring (no seal) PEEK/PTFE(1)
hardfacing or solid hardfacing, solid
alloy 6 alloy 6 or ceramic
Ratings(3)
Class 150, 300 or Class 150, 300 or Class 150, 300 or
Class 150 Class 300 Class 600 or 900 Class 300 or 600
600 600 600
Flow Coefficients (Maximum Cv) / Rangeability (Flow Coefficient Ratio)
26 to 10,300 / 499 to 18,300 / 1,109 to 2,496 / 181 to 3,000 / 12.2 to 1,050 /
26 to 3,000 / 300:1 8.4 to 8,270 / 300:1
300:1 100:1 100:1 200:1 100:1
Shutoff Classification
PEEK/PTFE:less
Single and Dual than 1% of Class
Fisher TCM Plus or Ultra: Class VI Delrin: less than IV
Stainless Steel & HD Metal: Class IV 1% of Class IV Delrin: less than Class IV Class IV
Flow Ring: 5% of valve capacity Flow Ring: 1% of 4% of Class IV
valve capacity Flow Ring: 2% of
valve capacity
Compatible Actuators
1061, 1069, 321 &
1051, 1052, 1061 & 1066 1052 & 1061(2) 1051, 1052, 1061 & 1066
329
Options
Characterized &
High Density
Basis Weight
Shaft Seal: Radial Aerodomet &
Design with an Alloy 6 body insert,
special seal or live Hydrodomet Alloy 6 body insert
electric actuator & Ceramic Trim
loaded packing Attenuators
control circuits
Bidirectional Flow/
Dual Seal
1. PEEK stands for Poly Ether Ether Ketone.
2. Can be mounted to some sizes of this valve type, please consult an Applications Engineer.
3. For DIN ratings, see Product Flier 51.3:010.

2
 Bulletin 40:002
Butterfly Valves
A11 A31A 8532 A41 8560 9500 DSV
Style and Application
Package of 8510
HPBV for on/off Fully lined Butterfly
HPBV for on/off HPBV for throttling HPBV for on/off HPBV for throttling HPBV and 1061
service under valve for on/off and
service for liquid, service for liquid, service for liquid, service for liquid, Pneumatic Piston
extreme pressure throtling service for
gas and steam gas and steam gas and steam gas and steam Actuator for high
and high tight shutoff
applications applications applications applications cycle service for
temperature applications
Digester Switching
Sizes
Class 150,300
30-48” 14-24” 2-12” 2-12” 4-14”
Class 600 3-24”
End Connection / Pressure Class
Wafer or Single Wafer or Single Flange / Class 150 or
Wafer or Single Flange / Class 150 or Wafer / Class 125
flange / Class 150, 300 = 3-12” Wafer / Class 300
300 or 150
300 or 600 Wafer / Class 150/300/600 = 2”
Shaft Style
Class 150,300 all
Splined for
sizes & Class 600
throttling, also
14-24” = Keyed Keyed Splined Double D Splined Splined for on/off
available in keyed
Class 600 3-12” =
for on/off
square end
Valve Body Material
Steel, S31600 Cast Iron, Steel,
Steel, S31600 Stainless Steel, All Nickel Steel, Stainless Steel (S31600 & Stainless Steel
Stainless Steel, All Stainless Steel
Alloys S31700) (S31600)
Nickel Alloys (S31600)
Seal Material
PTFE (150,300),
Tefzel (600), Metal,
NOVEXt,
R PTFE, NOVEX (S31600 or Nitronic 60), PTFE, Reinforced PTFE, UHMWPE(2), Fully lined in Nitrile
Phoenix III, Flow Ring
Phoenix III, Phoenix II Fire Tested NOVEX, Phoenix III, Metal (for 2”) or PTFE
Phoenix III Fire
Tested,
Cryo-TightR
Ratings
Class 150, 300, Class 150, 300 for 3-12”, Class
Class 150, 300 Class 150 Class 300
600, 900(1), 1500(1) 150/300/600 for 2”
Flow Coefficients (Maximum Cv) / Rangeability (Flow Coefficient Ratio)
4550 to 21,500 / 80.2 to 5,400 / 0.2 to 7,020 / 33:1 434 to 7,040 /
182 to 79,845 4550 to 21,500 80.2 to 5,400
100:1 100:1 or 100:1(1) 100:1
Shutoff Classification
PTFE: Bidirectional
Bubble Tight
Metal: 20% of PTFE, Reinforced PTFE, UHMWPE:
Class IV Bidirectional no visible leakage(1)
NOVEX: Class V PTFE: Bidirectional Bubble Tight NOVEX: Forward 1/10 of Class IV
or VI NOVEX: Reverse Class V Phoenix III: Bidirectional no visible 5% of valve
Class VI
Phoenix III: Phoenix III: Bidirectional Bubble Tight leakage capacity
Reverse Bubble Phoenix III Fire Tested: Class VI 2” Metal: Bidirectional .001% of
Tight, Forward maximum valve capacity (1/10 of Class
Class VI IV)
Cryogenic & Fire
Tested: (1)
Compatible Actuators
1051, 1052, 1061 1051, 1052, 1061 1051, 1052, 1061
1031 &1035 1031 &1035 1031 & 1035 1061
& 1066 & 1066 & 1066
Options
Part of the
POSI-SEAL
R
Package
1. Consult this product’s sales bulletin for complete information.
2. UHMWPE stands for Ultra High Molecular Weight Polyethylene.

3
Bulletin 40:002

ENVIRO-SEAL, FIELDVUE, Vee-Ball, Cam Vee Ball, Hi Ball, Fisher TCM Plus, NOVEX, Phoenix III, POSI-SEAL, Hydrodome, Aerodome, Cryo-Tight, Fisher, Fisher-Rosemount, and
Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc.All other marks are the property of their respective owners.
EFisher Controls International, Inc. 1998; All Rights Reserved

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied,
regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

For information, contact Fisher Controls:

Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461

4
Printed in U.S.A.