Scribd
Upload
6 views

Checklist for Site preparation

The document is a checklist for the construction of a Tailings Storage Facility (TSF), detailing pre-construction planning, site preparation, embankment construction, fencing installation, concrete leveling, metal structures, and health and safety measures. Each section includes specific tasks that need to be completed, verified, and documented. The checklist ensures compliance with design specifications and safety standards throughout the construction process.

Uploaded by

mohamed saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6 views

Checklist for Site preparation

The document is a checklist for the construction of a Tailings Storage Facility (TSF), detailing pre-construction planning, site preparation, embankment construction, fencing installation, concrete leveling, metal structures, and health and safety measures. Each section includes specific tasks that need to be completed, verified, and documented. The checklist ensures compliance with design specifications and safety standards throughout the construction process.

Uploaded by

mohamed saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Checklist of TSF

Seria
Dat
l item Yes No comment
No. e
A. Pre-Construction Planning
Obtain all necessary permits and approvals
1
from regulatory authorities.
Review and approve engineering designs
2
and drawings
Conduct a site survey to confirm
3
boundaries and topography.
Verify materials meet project
4
specifications and standards
Ensure availability of tools, equipment,
5
and personnel.
Conduct a risk assessment and develop a
6
safety plan.
B. Site Preparation
Clear and level the site for camp and fence
1
construction.
Mark boundaries and fence lines using
2
stakes or survey markers.
Establish access roads for construction
3
vehicles and equipment.
Set up temporary storage areas for
4
materials and tools.
Prepare the foundation by removing
5 unsuitable materials and compacting the
base.
C. Embankment Construction
Are the Soil tests conducted and approved
1
for material
Place and compact embankment materials
2
in controlled layers.
3 Conduct regular compaction tests to
Checklist of TSF

ensure design specifications are met.


D. Fencing Installation
Materials Inspections:
 Verify that fencing materials (posts,
mesh, gates, etc.) meet design
specifications.
1
 Check for corrosion resistance and
durability of materials.
 Ensure all materials are free from
defects or damage.
Installation:
 Dig post holes to the required depth
and spacing.
 Set fence posts securely in concrete or
compacted soil.
 Install horizontal rails or wires
2 between posts.
 Attach fencing material (e.g., chain-
link, barbed wire, mesh) securely.
 Install gates at designated access
points.
 Ensure fences are aligned, level, and
meet height requirements.
E. Plain concrete leveling course
Checked for completion of preceding
1
activates for the area to be completed
Check for formwork and dimensions? It is
2
Ok
3 Check for mix proportion. Is it as specified?
Check for placement and compaction. Is it
4
Ok?
5 Perform cube samples to check the
strength for 7 days and 28 days to be fit
Checklist of TSF

with the design


F. Metal Structures
Check material test certificates for grade,
1
size, and compliance.
Inspect for defects (cracks, rust,
2
deformations
Ensure foundations are level and properly
3
aligned.
Check foundation bolts and anchor plates for
4
correct placement.
Erect columns and beams according to
5
design drawings.
Secure all connections (bolts, welds) as per
6
specifications.
Secure all connections (bolts, welds) as per
7
specifications.
Check for proper spacing and clearance
8
between components.
G. Health and Safety
Conduct safety briefings for workers before
1
starting construction.
Ensure all workers wear appropriate PPE
2
(e.g., helmets, gloves, boots).
Monitor for hazards (e.g., heavy equipment,
3
uneven terrain).
Provide first aid kits and emergency contact
4
information.

You might also like