Scribd
Upload
5 views2 pages

qc note 1

The document outlines the qualifications and skills required for an inspector in the field of cathodic protection, emphasizing knowledge of international codes and standards, particularly for oil and gas or petrochemical industries. Candidates must have at least two years of documented experience and be capable of planning inspections, managing quality assurance, and resolving inconsistencies. Key technical competencies include familiarity with various industrial areas and effective communication and problem-solving skills.

Uploaded by

alitabrej242
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views2 pages

qc note 1

The document outlines the qualifications and skills required for an inspector in the field of cathodic protection, emphasizing knowledge of international codes and standards, particularly for oil and gas or petrochemical industries. Candidates must have at least two years of documented experience and be capable of planning inspections, managing quality assurance, and resolving inconsistencies. Key technical competencies include familiarity with various industrial areas and effective communication and problem-solving skills.

Uploaded by

alitabrej242
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

- National Electric Code/NFPA 70, IEC or equivalent standards.

- The incumbent shall also have working knowledge of electrical installations


including materials, methods, specifications, and hazardous location
identification for oil and gas or petrochemical industries.
- Inspector should have two (2) years documented experience in the field of
cathodic protection for the required specific application.
- The candidate shall be able to demonstrate a thorough working knowledge of
international codes and standards related to inspecting Cathodic Protection
System and its components, such as anode installation, cable installation, and
positive and negative cable hookups to rectifier.
- The candidate shall be able to interpret and assess cathodic protection design
packages to ensure compliance with the contractual requirements.

Knowledge
- Technical knowledge and familiar with related international codes and
standards in particular discipline
- Able to check that suitable and appropriate inspection and test tools are used
- Investigative and analyze nonconformities and observations and figuring out
solutions
- Capability of planning and controlling inspections for medium and Mega scale
project.

Job Specific Specialty


- ITP Study
- Prevention and solving inconsistency
- Pre-Inspection
- RFI Management
- Punch Clear Management
- Punch Clear Implementation
- Plant Start-Up
- Operation
- Maintenance
- Final Hand-over

Technical Skills / Competencies


- Cooling Tower
- Compressor Area
- Tank Farm
- Utility and Process Area
- Reactor and Reformer Area
- Flare area
- 230 KV GIS Substation
- 34.5 KV GIS Substation
- MV & LV Substation
- Central Control Building
- Remote Interface Building
- Emergency Diesel Generator
- Communication
- Client Management
- Communication
- Work Proficiency
- Problem solving
- Documentation Control
- Technical Know-how
- Decision Making
- Reports preparation
Required Skills
Quality Management
QA/QC Planning
QC Execution
Quality Training
Subcontractor Management (QAQC)
Quality Audit

You might also like