data-sheetschilling-uhdiii520
data-sheetschilling-uhdiii520
TechnipFMC.com
© Copyright TechnipFMC plc 2018. v 1.0. All rights reserved. Schilling Robotics Ultra Heavy Duty (UHD)-III ROV | 1
ISOL-8 Auxiliary Tooling Pump/Valve Packs
Specifications
To meet the most demanding intervention
requirements, the pressure and flow of the ISOL-8 Working Depth: 3,000 mts & 4,000 mts
pump can be controlled from the surface. The pump Docking Interface SWL: 13,025kg
is capable of producing a maximum output of 50-
gpm at 5,000-psi., sufficient to actuate BOP shear Through-Frame Lift: 3,500kg
rams and achieve full closure in 45-seconds or less
as specified by API 53. This level of performance is Weight in Air: 5,600kg
attained through an 8 double acting pump unit that Dimensions: 3.5m X 1.9m X 2.1
can operate with hydraulic fluid, water glycol or
seawater. For tooling/intervention applications the Payload: 450 kgf to 650kgf
ISOL-8 pump can be configured with 4 or 8 double
acting pumps providing the option of single or dual Peak Thrust Performance
output. In dual mode the pump can deliver dual • Forward/ Aft/ Lateral: 1,200kgf
fluids simultaneously offering fully independent • Vertical - Up/ Down: 1,000kgf
pressure and flow control of each circuit through • StationKeep: 10cm
the onboard Schilling Robotics' Valve Packs.
The Valve Packs design follows Schilling Robotics Equipment Fit
principle of rapid maintenance and repair, the • Manipulators: Any Schilling Model
valves are quickly reconfigurable, provide onboard • Cameras: SD and HD Options
diagnostic and can be rapidly changed with no • Depth Sensor: Valeport
requirement to drain an oil filled chamber as each • Heading Sensor: IXblu Nano
valve is self compensating. • DVL: Teledyne RDI 1200kHz
Hydraulic System
• HPU: 250-hp
• Auxiliary: 150-hp
• Operating Pressure: 207Bar
• Thrusters: (7) Sub Atlantic 420
TechnipFMC.com
© Copyright TechnipFMC plc 2018. v 1.0. All rights reserved. Schilling Robotics Ultra Heavy Duty (UHD)-III ROV | 2