Format No P085/MT/01 Rev. No.

03

TEST REPORT
TEST REPORT ISSUED BY:KOLKATA LAB SAMPLE TESTED BY/AT:KOLKATA LAB
TEST REPORT NO. KOL-6880-TR-776754
ULR NO. TC852225000002626F
TEST REPORT & ISSUE DATE: 16/05/2025
DISCIPLINE : MECHANICAL TEST GROUP NAME : BUILDING MATERIALS
CUSTOMER NAME & ADDRESS: PROJECT SITE ADDRESS:
M/s. JMCC Infra Projects Private Limited Client Name-NAHAR, Client Project-OSWAL LOGISTICS PARK
C/o Nahar Industrial Enterprises Ltd., NH-2, Delhi Road, Bighati Near Contractor Name-JMCC Infra Projects Private Limited
Mankundu, -
Hooghly-712124

QUANTITY: 5 kg
DATE OF RECEIPT: 29/04/2025
CUSTOMER REF. NO & DATE: Ref. OSWAL/KFI/JMCC/01 Dated 29.04.2025
CONDITION OF SAMPLE ON RECEIPT: Ok
TEST METHOD: IS 2386 Part-01 : 1963 RA : 2021 Amd: 04, IS 2386 Part-03 : 1963 RA 2021
Ams-01, Reference Standard IS 383: 2016 Amd-2

FINE AGGREGATE PHYSICAL TEST RESULTS

(*)SOURCE OF SAMPLE: Source- ILLAMBAZAR

(*)TYPE OF AGGREGATE : NATURAL SAND
PERIOD OF TEST : 12/05/2025 TO 14/05/2025
PARTICLE SIZE DISTRIBUTION TEST: TEST METHOD : IS 2386(Part-01)

IS SIEVE (mm) Percentage Retain Percentage Percentage Requirement of Percentage Passing As Per IS
Weight Cumulative Retain Cumulative 383, Table No-9 for Fine Aggregate
Weight Passing Weight Zone-I Zone-II Zone-III Zone-IV
10.00 1.8 1.8 98.2 100 100 100 100
4.75 1.6 3.4 96.6 90-100 90-100 90-100 95-100
2.36 3.4 6.8 93.2 60-95 75-100 85-100 95-100
1.18 10.2 17.0 83.0 30-70 55-90 75-100 90-100
0.600 26.9 43.9 56.1 15-34 35-59 60-79 80-100
0.300 38.6 82.5 17.5 5-20 8-30 12-40 15-50
0.150 16.0 98.4 1.6 0-10 0-10 0-10 0-15
Pan 1.6 100.0 0.0 -
Please refer clause 6.3 & Table no 9
Clause No. 6.3 of IS 383: The grading of fine aggregate, when determined as described in IS 2386 (Part 1) shall be within the limits given in
Table 9 and shall be described as fine aggregate, Grading Zones I, II, III and IV. Where the grading falls outside the limits of any particular
grading zone of sieves over than 600 µm IS Sieve by an amount not exceeding 5 percent for a particular sieve size, (subject to a cumulative
amount of 10 percent), it shall be regarded as falling within that grading zone. This tolerance shall not be applied to percentage passing the 600
µm IS Sieve or to percentage passing any other sieve size on the coarse limit of Grading Zone I or the finer limit of Grading Zone IV.

Remarks : For crushed stone sands, the permissible limit on 150µm IS Sieve is increased to 20%. This does not affect the 5% allowance
permitted in IS 383 clause no 6.3 Note-1 of table-9 applying to other sieve sizes.
As Per IS 383 Clause No 6.3 Note-1 of table-9: The grading falls outside the limits of any particular grading zone of sieves other than
600-micron IS Sieve by a total amount not exceeding 5 percent, it shall be regarded as falling within that grading zone. This tolerance shall not
be applied to percentage passing the 600-micron IS Sieve or to percentage passing any other sieve size on the coarse limit of Grading Zone I or
the finer limit of Grading Zone IV.

Page 1 of 2
 TEST REPORT NO. : KOL-6880-TR-776754

ULR NO. : TC852225000002626F

DISCIPLINE : MECHANICAL TEST GROUP NAME : BUILDING MATERIALS

Sr. No Type of Test Test Method Results Results Requirements As Per IS

(Individual) (Mean) 383
1 MATERIAL FINER THAN 75 µ, % IS 2386(Part-01) -- 0.9 Max 3.00
2 WATER ABSORPTION (% OF DRY IS 2386 (Part-03) Method III 1.40 1.40
WEIGHT), % 1.41
3.1 SPECIFIC GRAVITY BASED ON IS 2386 (Part-03) Method III 2.57 2.58
DRY AGGREGATE 2.58
3.2 SPECIFIC GRAVITY-BASED ON IS 2386 (Part-03) Method III 2.61 2.61
SSD CONDITION OF AGGREGATE 2.62
4 DRY LOOSE BULK DENSITY, kg/l IS 2386 (Part-03) 1.49 --
5 RODDED BULK DENSITY, kg/l IS 2386 (Part-03) 1.60 --
Remark:
(*)Mark Information furnished by the customer and can affect the validity of test results.
Conditioning of the aggregate at the time of Density Test : Oven Dry

NOTE:
-- Sample/s was/were not drawn by laboratory.
-- The Reported result/s is/are valid only to the sample submitted to the laboratory.
-- No part of the report, except in full, shall be reproduced without written consent of the laboratory.

-- The authenticity of this report can be verified by scan QR Code to know your Report mentioned below.

******************End of Report******************

Rajeev Ghosh
Authorized Signatory SCAN HERE TO KNOW NABL SCOPE SCAN HERE TO KNOW YOUR REPORT

Page 2 of 2

Powered by TCPDF (www.tcpdf.org)