Scribd
Upload
4 views

Tutorial 14a_ Basic polygonal modeling—ArcGIS CityEngine Resources _ Documentation

This document provides a tutorial on basic polygonal modeling using ArcGIS CityEngine, specifically guiding users through the process of creating a simple house. It includes detailed steps for using polygonal shape creation tools, adding 3D elements, and applying textures to different parts of the model. The tutorial is designed for users to follow along and enhance their modeling skills within the software.

Uploaded by

Khan Hna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Tutorial 14a_ Basic polygonal modeling—ArcGIS CityEngine Resources _ Documentation

This document provides a tutorial on basic polygonal modeling using ArcGIS CityEngine, specifically guiding users through the process of creating a simple house. It includes detailed steps for using polygonal shape creation tools, adding 3D elements, and applying textures to different parts of the model. The tutorial is designed for users to follow along and enhance their modeling skills within the software.

Uploaded by

Khan Hna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation

ArcGIS CityEngine Overview Integrations Resources Free Trial Pricing

Home What's New Get Started Help CGA Python Tutorials

Tutorial 14a: Basic polygonal modeling


CityEngine 2023.1 | OTHER VERSIONS | Help archive

2024.12024.02023.12023.02022.12022.02021.1

To access the tutorials in CityEngine, click Help > Download Tutorials and Examples. After choosing a tutorial or example, the project is automatically
downloaded and added to your workspace.

Part 1: Use polygonal modeling


In this tutorial, you will make a simple house using the polygonal modeling tools.

1. In the Navigator, double-click 14A_Basic_1.cej from the tutorial folder to open the initial project.
2. Select the Polygonal Shape Creation tool.

3. Click in the viewport to set the first point on the bottom left corner of the white outline.
4. Move the mouse to preview the line.
Dashed orange lines appear when snapped.
5. Find the snapping line at the top, and click the top left point of the outline.

6. Move the mouse, and find the 90 degree snapping line.


A small arc appears between the current and the previous line for this snap.
7. Click to set the third point.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 1/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
8. Do the same for the fourth point.

9. Follow the shape outline, and click to set the fifth point.
10. For the last point, find the intersection between the parallel snapping line (shown with small parallel signs) and the 90 degree snapping line from
the first point.

11. Click the first point again to finish the shape.


12. To create a 3D house, hover over the polygon.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 2/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
13. Click the orange handle and hold the mouse. Drag up the orange handle.

14. To split the back section, hover over the edge, click, go for the parallel snap combined with the edge snap, and click again.

15. Hover over the polygon, and drag it up.

16. To create the roof, split the front polygon like the last one. Then hover over the edge. When an orange handle appears, drag it up until you snap
to the polygon.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 3/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
17. To pull the roof out, first select the Rectangular Shape Creation tool. Snap to the corner, click, snap to the edge, and click again.

18. Drag out this polygon.

Depending on what roof you want, you can drag along the green or the blue arrow. Use the blue for now.

19. To create a garage, first draw a rectangle, and then drag it out.

20. Draw another rectangle, and drag it inward a bit.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 4/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
21. To create a door, draw a rectangle and drag it in.

22. Rotate the camera to view the house from above. Click the corner, and follow the snapline until the snapline from the top appears.

23. Click and then click the other corner to finish the polygon.

Part 2: Add texturing


The shape is now finished, and you will texture it. You can continue with your scene, or alternatively, open the reference 14A_Basic_2.cej.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 5/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
1. Click the selection tool, and then click the house.

2. Open the texturing tool. Click browse, and select the wall_stones texture.
You can find it in the asset folder of the tutorial.

3. Double-click to open. For a uniform texturing, select mode-dimensions and assign. To make the bricks smaller, set width and height to 10.

4. Now select all roofs. Double-click the first polygon, and then press Ctrl and click the other ones.

5. Browse for the roof texture and click assign.


https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 6/7
15/05/2025 11:03 Tutorial 14a: Basic polygonal modeling—ArcGIS CityEngine Resources | Documentation
6. For the door, pick the door texture. Set the mode to Stretch to polygon, to make the texture fit the door, and click assign.

7. Do the same for the garage, with the garage texture.

The house is now finished.

Note:
You can still drag all faces and edges. The texture automatically adapts to new dimensions.

https://doc.arcgis.com/en/cityengine/2023.1/tutorials/tutorial-14a-basic-polygonal-modeling.htm 7/7

You might also like