Satish Jadav

00917045828284, [email protected], Skype Id – satishjadav.20

I-59/203, Navgrah CHS, Poonam Sagar complex, Miraroad-East, Mumbai, India

PROFILE

 A dynamic & energetic RF Engineer, associated with the cellular industry for past 12+ years, having skills
on GSM/WCDMA/LTE/5G-NR, having experience on multi-vendor equipment as Samsung, Alcatel-Lucent,
Nokia Solutions Networks, Airspan and Huawei, Ericssoni.
 An active team player and initiator with leading capabilities seeking challenges of new technologies as a
Senior RF Engineer to utilize the diversified global experience, computing and technical knowledge, good
communication skills, and quick learning attitude to give exceptional throughput even under pressure.
 15+ year experience in RF Performance Monitoring & RF Optimization in 5G, LTE, WCDMA, and GSM.
TOOLS
 NetAct - Nokia KPI Monitoring tool.
 Map Info: GIS Tool
 IBwave: Indoor Design Tool
 Nemo Outdoor: Drive test Tool
 MyCom - Samsung KPI Monitoring tool.
 LSMR - Samsung Network Management Tool.
 M2000 - Huawei KPI monitoring tool.
 PRS/ Omstar/Unet-Huawei Tools
 NPO - Alcatel-Lucent tool for the performance monitoring.
 Radient: Drivetest Tool by Motorola
 True Call - Tool to analyze call logs by each UE/gNb.
 Windcatcher - Post processing tool for the drive test logs by Keysight.
 Actix Analyzer - Post processing tool for the drive test logs by Actix.
 XACL-M – Drive test network data collection tool by Accuver.
 XCAP - Post Processing Tool by Accuver.
 TEMS Discovery - Post Processing tool by Infovista.
 Tems Investigation – Drivetest Tool by infovista
 Huawei GENEX ASSISTANCE - Post Processing Tool by Huawei
 Nemo Analyzer - Post processing tool.
 Anritsu Spectrum Analyzer - Tool to analyzer spectrum interference.
 NSP - Alcatel-Lucent tool for site monitoring, alarms monitoring, and to make the parameter changes.
 Atoll - Radio Network planning tool.
 WIPS - Alcatel-Lucent tool to get the site data base and the parameters.
 Anritsu Spectrum Analyzer - A tool to figure out External Interference in the network.
 Map Info - GIS tool
 MapSource-2008 - A tool to make the drive root for the drive-test
EDUCATION
 BE in Construction Engineering from Shah anchor Kutchi College of Engineering, Mumbai, (Maharashtra,
India) in the Year 2000
A SNAPSHOT OF PROFESSIONAL EXPERIENCE
Employer & Projects Role Duration
Reliance JIO, India (Samsung/Huawei Product-4g/ Integrated Access Network Lead August 2015- Til date
Ericsson-5G)
First Point Group(Ericsson- STC IBS Project) Saudi
Arabia DAS Design Engineer May2015 to August 2015
First Point Group (Huawei-True Move, Thailand RF Consultant (LTE) June-2013 to Sept 2014
IGTL- Ooredoo- Maldives-Huawei RF Engineer (2G/3G) March 2013 to June2013
Covenant Tel MEA-(Nokia- Du Project)- Dubai RF Engineer June2012 to Dec2012
Techmahindra- LBS Project (Qatar)_huawei RF Engineer Dec2011- June2012
Qatar Telecom Ltd- Qatar RF Engineer Jan 2006 to Dec 2010
GTL Ltd- Asia/ MEA RF Consultant Oct-2004 to Jan-2006
Reliance Infocomm Ltd- Off role RF Engineer May2003- Oct-2004
Microqual Techno Pvt Ltd RF Engineer June2000- May2003

1
PROFESSIONAL EXPERIENCE
Reliance Jio India Ltd, Mumbai India Aug 2015 – Present
Integrated Access Network Lead, LTE/VoLTE/5G NR
 Worked in RJIL LTE and VoLTE/5G NR project as Integrated Access Network Lead in Mumbai and my main
responsibility are as follows.
 Managing the drive-test team for the SCFT of new sites and then the cluster drive after 90% of the sites in
the cluster got on-air.
 Analyzing the log-files to check the swap, RSRP and SINR.
 Giving the suitable recommendation for poor RSRP and SINR patch.
 Planning of small cell to fill the coverage hole in the network.
 Recommendations to increase single server locations in order to improve throughput affected areas due
to low SINR caused by pollution.
 Analyzing the Data KPI’s such as Accessibility, Retainability and Mobility for the Network Improvement
using MyCom dump.
 Analyzing the PCI confusion alarms on the cell and giving certain recommendations to solve the PCI
confusion alarms and parameter changes using Samsung’s LSMR.
 Analyze and troubleshoot of VOLTE KPIs like Accessibility, Retainability, Mobility and Integrity for QCI
1&QCI 5 to optimize these KPI to meet given threshold value.
 Optimizing VOLTE sites to reduce drops, improving the SRVCC Handover
 Prepared the Region KPI dashboard for LTE & VOLTE site weekly customer meeting.
 Supervision of Backhaul/Media Readiness and Site Installation.
 Managing and coordinating Drive Test for Small Clusters.
 Monitor the Network Availability, Alarms & Rectification
 Interference Monitoring & resolution. (External Interference using Anritsu Spectrum Analyzer)
 Bench marking with other operators and identifying the areas where our operator is lagging behind in
comparison with other operators and giving suitable recommendation for the improvement of that area.
 Training to Technicians and Junior RF Engineers.
 Handling of Customer Complaints.
5G
 Coordinating and designing VoLTE & 5G drive test setup with the drive testers.
 Post processing VoLTE & 5G drive test logs on Windcatcher and XCAP.
 Making 5G reports and analyze 5G throughputs.
 Live troubleshooting with Backhaul/Core teams for increase in 5G radio backhaul bandwidth for
throughput improvement.
 Running different 5G test scenarios like, HTTP, Iperf TCP, and UDP for 5G throughput troubleshooting and
compare the throughputs in the various layers.
 Making the final 5G report and submitting it to Client.
 Carry out lab and field-testing activities to collect the 4G/5G cellular network data and provide pre/post
processing analysis.
 Perform network optimization analysis and recommendations using a combination of drive test data and
network statistics.
 Performing layer-3 analysis and UE traces for end-to-end call flow to understand the behavior of network
during troubleshooting for the network optimization.
 Performing site build verifications and report acceptance from the vendor.
 Using tools such as XCAL, XCAP, Mapinfo, Coyote data logger, Netspan, SuperEMS, Spectrum Analyzer for
the data collection and optimizations.
 Create IBS Designs using IBwave Software for all types of buildings(Offices/ High Rise/Stadium,
establishing
 Link Budget, BOM for deploying LTE/NR technologies.
 Coverage estimation by running predictions for floors and generating 3D model

2
DAS Design Engineer, Ericsson Saudi Arabia (STC Project) May 2015 – Aug 2015
Design IBS coverage solutions to provide indoor coverage in venues suffering from poor coverage or
Requiring dedicated capacity as Airports, Shopping Malls, Stadiums, High-rise towers … etc. for different
Technologies including GSM, UMTS, LTE, TETRA, iDEN, CDMA, and 1xEV-DO on different frequency bands.

Assessment of the optimum Distributed Antenna System (DAS) type (Active/Passive or hybrid) according
to technical, financial and logistics’ metrics by assessing different active/passive suppliers’ IBS solutions .

Perform capacity study for the venue in order to determine the required capacity to offer and plan the
Sectorization strategy in order to minimize Soft Handoff and intra-site interference.
Optimize IBS venues to enhance end-customer experience in terms of call continuity, call quality and data
Rate performance by minimizing dropped calls, interference and SHO regions to ensure IBS dominance
Over interfering sites.
Study new solutions that can are developed for IBS coverage including Small Cells, Wi-Fi planning and
large
Scale stadiums.
Create IBS Designs using IBwave Software for all types of buildings(Offices/ High Rise/Stadium,
establishing
Link Budget, BOM for deploying LTE technologies.
Coverage estimation by running predictions for floors and generating 3D model

First Point Group (Client – True Move Huawei), Bangkok Thailand June 2013 – Sept 2014
RF Consultant, 4G/Volte Project
 Responsible for FTV & Cluster Benchmarking optimization for True Move projects.
 Post optimization of Cluster for LTE/Volte after swap & responsible for providing solutions and
recommendation to meet the baseline/cluster target KPI of cluster.
 LTE/Volte Tuning: Performed Coverage & interference analysis (RSRP, and SINR) (using drive tests and
statistical data to find out any coverage issues (overshooting cells, pilot pollution, best server signal
strength, pilot Ec/No measurements, interference) as well as initiating short and long calls drive tests to
find any Access (missing neighbors) Blocked/Dropped calls and delay/throughput issues and fixing them.
UMTS Optimization: Troubleshooting RF issues (Pilot pollution and Missing Neighbors), Idle mode Issues
(access and paging) and RRC Setup failures. Drive test analysis, Post processing, call flows studies, drop
calls, handover process, Pilot Channel RSRP Level and Interference Ec/No. Parameters tuning, neighbor
definition, Design and site modifications (Tilt, azimuth, height), Statistics and KPI’s analysis.
 Similar to Lte/Volte issues, also optimized the corresponding LTE issue in the network after swap.
 Benchmarking Report, DT and RF Optimization, External Cell Definition Audit, Neighbor Planning and
Alignment, Overshooting Cell/High RTWP Issues, Frequency Plan and Audit, LAC/RAC/TAC Audit,
Optimization Tracker, Worst Cells Tracker, MS KPI Tracker, Physical Optimization Planned Activity for
Network Upgrade, Network Capacity Planning, LTE Ping & Speed Test.

 Create IBS Designs using IBwave Software for all types of buildings(Offices/ High Rise/Stadium,
establishing
 Link Budget, BOM for deploying LTE/Voltetechnologies.
 Coverage estimation by running predictions for floors and generating 3D model

3
 IGTL Maldives March 2013 – June 2013
Engineer-RF, Ooredoo Project-Huawei
 Worked on MCTRX to RRH swap project as a 3G RF Optimizer, in which aim is to analyze the KPI, changes
before swap with respect to after swap. Also worked in the carrier addition project and analyzed the stats
before the carrier was added, and how the new carrier is performing.
 Pre-launched 7 days and post-launched 7 days KPI monitoring in both MCTRX>>RRH and Carrier up-
gradation project.
 Network Optimization Changes (neighbor list, tilts etc).
 Effects on UL Interference, and RTWP after the swap, if degraded, analyze and troubleshoot and given
recommendation.
 To check, whether there is a sector swap, after the MCTRX>>RRH Swap.
 KPI analysis on sectorization and carrier up-gradation.
 KPI’s analysis, Parameter analysis, counters analysis and recommendations using the NPO and NSP.
 Analysis of CS/PS drives plots using XCAP tool, Google Earth, MapInfo. Evaluation and analysis of CPICH
RSCP, CPICH Ec/Io, Pilot pollution, mobility and recommending changes in tilt, Azimuth and CPICH power
to improve the KPI’s.
 Detailed analysis of CS/PS Call Drops/Failures through Layer 3 message and providing
recommendations to avoid them.
 Detailed analysis of Inter Frequency, IRAT attempts/ failures through layer 3 messages and checking the
different triggering conditions and giving recommendations to avoid them.
 Monitoring of re-farming and recommendations to restrict the re-farming issue.

Covenant Tel- MEA- Du Project Dubai June 2012 – Dec 2012

 RF Drive Test, Analysis for optimization of the networks. (Using drive test and post processing tools).
 Neighbor planning of new sites using Mipt2g and BCCH Planning
 , KPI Analysis, and identifying worst cell.
 Analyzing reports for checking neighbor’s discrepancies, cells having highest call drops, SDCCH, TCH drops,
SDCCH congestion & blocking, TCH congestion & blocking etc.
 Handover analysis based on handover reports.
 Extensive analysis of drive test log files on Genex Assistant and recommend solution for call drops, setup
failures, bad Quality patches and low coverage, to achieve the committed drive test KPIs for 2G.
 Prepare weekly report for top management to present the current cluster level KPIs in comparison with
the committed KPIs and highlight the challenges to achieve the targets.
 Audit of swap KPI and parameter mapping and highlighted the discrepancies found in KPI formulas.
 Performing Re-homing drive to check activation of GSM/GPRS services.
 Deciding Antenna azimuth by checking coverage prediction and analyzing Drive test log file.
 Auditing of New Sites and Verifying Hardware, Tilt, Antenna height & Orientation according to the
Planning Database.
 Bi-weekly parameter audit of the network on BSC, Cell and Neighbor level.
 Interference detection & rectification, Hand over, Sector Swapping & frequency scanning.
 Level and Quality Optimization to ensure Satisfaction of customer.
 Prepare Pre and Post Drive test reports, Problem cause and recommendation solutions.
 Proposing New Site to Overcome Coverage Patches & filling Capacity areas.
 All Customer related complaints.
 Problems like Indoor coverage, one-way talk, Echo, Speech Quality.
 To Make SSV/SCFT reports and Cluster Drive reports for the final submission to the client.

4
Techmahindra Ltd
Engineer-RF, LBS (Project – Polaris), Qatar-Huawei Dec 2011 – June 2012

 Cluster RF Optimization for LBS 2G/3G Live network (USA) handling AT&T GNG Full Project.
 Improvement of scanner KPI like SINR, percentage on LTE, RSRP, RSRQ and mobile KPI for 5 devices
designated each for Long call DL & UL, Short call and CSFB MO & MT.
 Identifying polluted areas, coverage holes and giving tilt recommendations, changing azimuth, reference
power to avoid/remove them.
 Analyzing call drops/ failures of LTE and CSFB using layer 3 messages and recommending necessary
changes to improve these KPI’s.
 Recommendations to increase single server locations in order to improve throughput affected areas due
to low SINR caused by pollution.
 Analyzing the PCI confusion alarms on the cell and giving certain recommendations to solve the PCI
confusion alarms.

Qatar Telecom (Project – 2g-3g Swap)), Qatar Jan 2006 – Dec 2010
Engineer-RF, Nokia WCDMA Project
 Worked on MCTRX to RRH swap project as a 3G RF Optimizer, in which aim is to analyze the KPI, changes
before swap with respect to after swap. Also worked in the carrier addition project and analyzed the stats
before the carrier was added, and how the new carrier is performing.
 Pre-launched 7 days and post-launched 7 days KPI monitoring in both MCTRX>>RRH and Carrier up-
gradation project.
 Network Optimization Changes (neighbor list, tilts etc).
 Effects on UL Interference, and RTWP after the swap, if degraded, analyze and troubleshoot and given
recommendation.
 To check, whether there is a sector swap, after the MCTRX>>RRH Swap.
 KPI analysis on sectorization and carrier up-gradation.
 KPI’s analysis, Parameter analysis, counters analysis and recommendations using the NPO and NSP.
 Analysis of CS/PS drives plots using XCAP tool, Google Earth, MapInfo. Evaluation and analysis of CPICH
RSCP, CPICH Ec/Io, Pilot pollution, mobility and recommending changes in tilt, Azimuth and CPICH power
to improve the KPI’s.
 Detailed analysis of CS/PS Call Drops/Failures through Layer 3 message and providing
recommendations to avoid them.
 Detailed analysis of Inter Frequency, IRAT attempts/ failures through layer 3 messages and checking the
different triggering conditions and giving recommendations to avoid them.
 Monitoring of re-farming and recommendations to restrict the re-farming issue.

GTl Ltd (Project –Omantel-Oman/ Dialog –Srilanka/ Qtel- Qatar/PBTL- Bangaldesh) Oct 2004 – Jan 2006
RF Consultant, 2G to 3G Project
 Launched the Greenfield2G/ 3G network in various countries...
 PSC and PRACH Planning of the 3g network and for the new sites coming in, using Atoll and MapInfo.
 2g to 2g and 2g to WCDMA neighbor planning using the MapInfo and G5 Tool.
 Analyzing the drive logs using the Actix Analyzer and optimize the poor RSRP, poor SINR and low
throughput area. This also involves the analysis of layer-3 messages for the improvement in the network.
 Parameter Audit and recommendation of corrective actions for discrepancy, if any.
 Parameter recommendations for improvement of impacted Accessibility, Call drop, Mobility and integrity
KPI’S.
 Responsible for the acceptance report as per the costumer's requirement.
 Interference analysis of the sites with are less than 200 meters from each other.
 Interference analysis of the sites in which the three sectors azimuth are less than 180 degrees or the two
sector azimuth are of less than 60 degrees.
 Increase the Cell-specific reference signals power for Cluster to Improve the Coverage.
 Modifying the threshold And Cell parameter for better cell reselection 3G to 4G.
 Analyzing traces and Drive test of the first 2g/3g call, vior, throughput, RSRQ, RSSI Uplink power over
PUSCH.
 Prepare the acceptance report and successfully managed to submit at customer end.
 Support KPI before and after site launches, troubleshoot and escalate as needed for the resolution.
 Identify the cross-feeder issues rectify it through the PSC.
 Improvements investigating the new sites in the network after the integration and scheduling drive test
for network services. Perform the Download and Upload throughput tests on each sector of the site and
5
 make sure to get maximum achievable DL & UL speeds at the best point of each cell with the best BLER, &
SINR Parameter values
 Perform coverage optimization by altering antenna down-tilts (Electrical + Mechanical) or azimuths to
ensure better coverage around sites.
 Identification of coverage holes in area of interest based on Customer complaints.

Reliance Infocomm Ltd RF Engineer

WCDMA Alcatel- Lucent (Project – WCDMA), Mumbai India May 2003 – Oct 2004
 Cluster RF Optimization for WCDMA Live network.
 Improvement of scanner KPI like SINR, percentage on LTE, RSRP, RSRQ and mobile KPI for 5 devices
designated each for Long call DL & UL, Short call and CSFB MO & MT.
 Identifying polluted areas, coverage holes and giving tilt recommendations, changing azimuth, reference
power to avoid/remove them.
 Analyzing call drops/ failures of 3G using layer 3 messages and recommending necessary changes to
improve these KPI’s.
 Recommendations to increase single server locations in order to improve throughput affected areas due
to low SINR caused by pollution.
 Analyzing the PCI confusion alarms on the cell and giving certain recommendations to solve the PCI
confusion alarms.
RF Engineer, Mumbai, circles June 2000 –May 2003
Microqual Technologies Ltd
 RF Drive Test, Analysis for optimization of the networks. (Using drive test and post processing tools).
 Neighbor planning of new sites using Mipt2g and BCCH Planning
 TCH Congestion Analysis, KPI Analysis, and identifying worst cell.
 Analyzing reports for checking neighbor’s discrepancies, cells having highest call drops, SDCCH, TCH drops,
SDCCH congestion & blocking, TCH congestion & blocking etc.
 Handover analysis based on handover reports.
 Extensive analysis of drive test log files on Genex Assistant and recommend solution for call drops, setup
failures, bad Quality patches and low coverage, to achieve the committed drive test KPIs for 2G.
 Prepare weekly report for top management to present the current cluster level KPIs in comparison with
the committed KPIs and highlight the challenges to achieve the targets.
 Audit of swap KPI and parameter mapping and highlighted the discrepancies found in KPI formulas.
 Performing Re-homing drive to check activation of GSM/GPRS services.
 Deciding Antenna azimuth by checking coverage prediction and analyzing Drive test log file.
 Auditing of New Sites and Verifying Hardware, Tilt, Antenna height & Orientation according to the
Planning Database.
 Bi-weekly parameter audit of the network on BSC, Cell and Neighbor level.
 Interference detection & rectification, Hand over, Sector Swapping & frequency scanning.
 Level and Quality Optimization to ensure Satisfaction of customer.
 Prepare Pre and Post Drive test reports, Problem cause and recommendation solutions.
 Proposing New Site to Overcome Coverage Patches & filling Capacity areas.
 All Customer related complaints.
 Problems like Indoor coverage, one-way talk, Echo, Speech Quality.
 To Make SSV/SCFT reports and Cluster Drive reports for the final submission to the client.

TRAINING

 Training given on 1xEVDO at GTL Mumbai, India.

 Training given on CDMA Basics and drive test using CAIT by Eric Guzman (Senior RF Engineer-
Lucent) at Reliance Infocomm Ltd. Mumbai, India.
 Training Given by Alcatel Qatar for Optimization (A9156).
 Training Given by Motorola (Bangladesh) for RF Planning as well as optimization.
 Training given on Planet EV in GTL Ltd.
 Tems 6.1 Data and Route Analysis (QATAR TELECOM)
 Attended Training for SYS 2(Motorola) in Qatar telecom Ltd
 UMTS Core Network Training in Qatar Telecom Ltd.
 BSS Overview Training for Nokia Siemens in Qatar
 Ran opt and Advantage Training from Aircom in Qatar.

6
 tsCode Naionality
P IND R /NDIAN Z6194477
JADAV
SATISH HARISI NGH
11/06/ 1974
MUNBAI,RAMARASHTRA
MURBA !
L
09/1 08/12/203C
P<IND JADAV<<SATISH<HA SINGH<<<««KKKKKK<«e
Z6194477<3IND7406117M3 0120841075014015620
 IRT urRIY REPUBLIC OF INDIA
avéSRMENTDPINGIAtie
NTUENDVCeaecvENASNYDeINDUANthraavter
IaT/ Nationality qrgtd . IPassport No.
P IND H r / INDIAN 26194477
J444/Surname
ISH-HARI
JADAV
fe H/ Given Name(s)
SATISH HARISINGH
Gfefer/Date of Birth fSex
11/06/1974
M
M
AVTHARI
Gftf e - /Place of Barth 010750
MUMBAI,MAHARASHTRA
HARISINGHjSAD
a Place of bs ARISINORHATV
omo7AjBATIE
MUMBAI
afa 6 ffè/Date of Expiry
L 08/12/2030
09/12/202
<<<<<««««««««««
P<INDJADAV<KSATISH<HARIS
Z6194477<3IND7406117M3012 .4i075014015620<40
 9447
ame f Father/Lg a n n
JADAv
HARISI NGH MATISINGH
JADAV
PUSHP A KARISI NGH
Nae of Spose
RAKMI SATISH JADAV
1-59/203,NAVGRAH CHS, POONAM SAGAR cOMPLEX
MIRA ROAD (EAS),THANE
PIN:401107,MAHARASHTRA, IND:
ce af issue
26151214 10/11/2020 MUMBA I
B01075014015620