Scribd
Upload
12 views1 page

Datasheet 1311854153

HI650 is a high impact polystyrene resin suitable for injection molding, recommended for use in electrical appliances, household products, and toys, while complying with food contact regulations. It features good impact resistance, easy flow, and specific physical properties such as a melt flow index of 8.0 g/10min and a tensile strength at yield of 232 kg/cm2. Processing temperatures range from 180-240 °C, with actual conditions varying based on mold design and equipment.

Uploaded by

akshay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views1 page

Datasheet 1311854153

HI650 is a high impact polystyrene resin suitable for injection molding, recommended for use in electrical appliances, household products, and toys, while complying with food contact regulations. It features good impact resistance, easy flow, and specific physical properties such as a melt flow index of 8.0 g/10min and a tensile strength at yield of 232 kg/cm2. Processing temperatures range from 180-240 °C, with actual conditions varying based on mold design and equipment.

Uploaded by

akshay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HI650

H ig h Im pac t P ol y st y re ne (HIPS )
Description:
HI650 is a high impact grade of polystyrene resin for injection molding with good impact
resistance and easy flow. It is recommended for electrical appliances (air conditioning
parts, TV), household products, sanitary ware, and toys. It also meets the requirement of
food contact regulation

Physical Properties: Method Unit Value

Melt Flow Index (5 kg/200⁰C) ASTM D1238 g/10min. 8.0

Izod Notched Impact (1/4", 23⁰C) ASTM D256 Kg-cm/cm 11

Tensile Strength at Yield (23⁰C) ASTM D638 kg/cm2 232

Flexural Strength at Yield (23⁰C) ASTM D790 kg/cm2 450

Flexural Modulus (23⁰C) ASTM D790 ×104kg/cm2 2.32

Rockwell Hardness (1/4", 23⁰C) ASTM D785 L-Scale 79

Heat Distortion Temperature (1/4", 18.6 kg/cm2) ASTM D648 ⁰C 90

Vicat Softening Temperature (1/8", 1 kg) ASTM D1525 ⁰C 96

Flammability UL-94 - HB (1.5)


Product Data sheet

Processing Technique

Processing Temperature : 180-240 ⁰C


**However, the actual processing conditions depend on mold design, power of machine, screw
configurations and other environments.**

Remark: The values presented on the above are typical laboratory average, not to be construed as specifications and may
vary within moderate ranges. The applicability or the accuracy of this information or the suitable of our products cannot be
guaranteed because the conditions of use on the part or our uses are beyond our control.

REV. 20110601

You might also like