0% found this document useful (0 votes)
8 views4 pages

5HGJAD

The QG 5500 EFI is a commercial gasoline generator set featuring electronic fuel injection for improved performance, low noise, and vibration. It has a weight of 288 lbs, dimensions of 33.6 x 22.2 x 16.7 inches, and operates at a sound level of 64 dB(A) at 10 ft. The generator includes a 2-year limited warranty, a range of models with specific ratings, and is supported by a comprehensive dealer network for installation and maintenance.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views4 pages

5HGJAD

The QG 5500 EFI is a commercial gasoline generator set featuring electronic fuel injection for improved performance, low noise, and vibration. It has a weight of 288 lbs, dimensions of 33.6 x 22.2 x 16.7 inches, and operates at a sound level of 64 dB(A) at 10 ft. The generator includes a 2-year limited warranty, a range of models with specific ratings, and is supported by a comprehensive dealer network for installation and maintenance.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Specification sheet

Commercial
generator set
TM
Quiet Gasoline
Series
QG 5500 EFI
Features and benefits Weight, size and sound level
• First EFI (electronic fuel injection) generator Weight: 288 lbs (131 kg)
set in its class
• EFI provides improved hot and cold start Size: Length 33.6 in (853 mm), width 22.2 in
capability (563 mm), height 16.7 in (425 mm)
• Integrated hydraulic pump option (pictured) Sound: 64 dB(A) at 10 ft (3 m), typical installation,
• Quietest and lowest vibration generator set in
full load
its class
• Integrated housing design
• Enclosed muffler for ease of installation
• Self-diagnostic capability to simplify
troubleshooting
• Runs two ACs
• Digital regulation for voltage stability as loads
change
• Electronic governor for voltage stability and
frequency control
• 2-year limited warranty, 5-year drive warranty

Models and ratings


Circuit
Model Fuel Hz Watts Voltage Amps PF Phase breaker
5.5 HGJAD-2138+ Gasoline 60 5500 120 45.8 1.0 1 2 pole, 30 A
5.5 HGJAD-2558+# Gasoline 60 5500 120/240 22.9 1.0 1 2 pole, 30 A
5.5 HGJAD-2140+ Gasoline 60 5500 120/240 22.9 1.0 1 2 pole, 30 A
5.5 HGJAD-6759♦ Gasoline 60 5500 120/240 22.9 1.0 1 2 pole, 30 A
- All 60 Hz models operate at 2400 r/min.
- Ratings apply up to 3000 ft (914 m) altitude, 85° F (29.4° C).
- Maximum power capability decreases 3.5% for each 1000 ft (305 m) above sea level and 1% for each 10o F (5.5° C)
increase in ambient** temperature above 85° F (29° C).
- Ratings are at intermittent power output.
+ EFI generator sets require a chassis-specific fuel system kit. See F-1106, Cummins Onan Commercial Mobile
Accessories and Service Support Catalog.
# Splined shaft.
** Ambient is defined as the air temperature measured at the cooling air inlet to the set.
♦ Evaporative spec: For trailer applications required to meet Tier III Evaporative emissions of the California Air Resources
board.
Effective January 1, 2011, gasoline generator sets on trailers, diesel chassis or any other non-motorized mobile
apparatus must have an EVAP generator set, approved tank, EVAP canister, hoses and fittings all meeting the CARB
Tier 3 and EPA phase 3 standards and specifications. This law applies in all 50 states.
Generator weight does not include battery charger or splined shaft.

Performance you rely on. TM


cumminsonan.com
©2013 Cummins Power Generation Inc. | A-1442h (1/13)
Standard features Engine details
• Electronic fuel Injection (EFI) for clean, smooth running Model: Cummins Onan OHV EH65V gasoline engine
under all conditions Design: 4-cycle, OHV, 90-degree V-twin
• Electronic governor Cylinders: 2
• Cummins Onan OHV engine Bore: 80 mm
• Pressurized thru flow cooling system
Stroke: 65 mm
• 4-point mounting system with coil spring vibration 3 3
isolators Displacement: 39.8 in (653 cm )
• Universal mounting tray with structural capability to Compression ratio: 8:1
support the generator set in commercial mobile Oil capacity: 2.0 qt (1.9 L) including filter
applications Power (max): At 2400 r/min: 11.6 hp
• Integral USDA Forest Service-approved spark-arrestor Cooling: Centrifugal blower, generator set mounted for
muffler high effectiveness, pressurized system, vertical flow
• Integral control box 3
Cooling air volume: 60 Hz: 500 ft /min (14.2 m /min)
3

• Instant one-touch stop switch at 2400 r/min. Air flow includes engine, generator set and
• Electronic ignition control cooling air flow
• Self diagnostic capability Fuel system:
• Hour meter • Replaceable dry element air cleaner
• Battery charging - 5 A • Gasoline side-draft throttle body.
• Remote disable/continuous stop • Remote mount electronic fuel pump with positive fuel
• Start and run without AC output - engine run only shutoff (45 psi), maximum fuel lift 3 ft (0.9 m)
• Enclosed muffler provides noise reduction and ease of 3
• Combustion air volume: 60 Hz: 17.2 ft /min (0.53
installation 3
m /min) at 2400 r/min
• Sound-attenuated housing Starting system: Remote, 12 V, negative ground;
• Waterproof remote connector automotive type starter with steel pinion and ring gear,
• Heavy-duty solenoid shift starter automatic start disconnect, connector for remote start
• Long-life fuel filter cable, start-stop rocker switch mounted on set control
• Spin-on, full-flow oil filter Ignition system: Electronic magneto type with resistor plugs
• Low oil pressure protection Lubrication: Full pressure positive displacement lube
• Over/under speed protection oil pump, spin-on, full-flow lube oil filter, low oil pressure
• Low power factor field over current protection shutdown, dipstick
• Digital voltage regulation Cylinder crankcase: Alloy aluminum with iron cylinder
• Hydraulic pump standard on some models liners cast into the block, aluminum oil base
• 10 ft generator set output leads Cylinder head: Aluminum, OHV, removable

Typical fuel consumption


Gasoline, Gal/hr (L/hr) No load Half load Full load
5.5HGJAD 0.35 (1.3) 0.60 (2.3) 0.95 (3.6)

Alternator details
Design: Cummins Onan, revolving field, AC, 2-pole self- Excitation: Capped, digital voltage regulation
excited, two bearing design DC brushes: Electrographic; long life
Insulation system and temperature rise: Meets Bearing: Double-sealed pre-lubricated ball bearings
requirements of NEMA MG-1 and CSA C22.2, Std. 100
Generator set performance
Motors and Generators
Cooling: Direct drive centrifugal blower, cast aluminum Hydraulic pump
housing for excellent heat transfer • Fixed displacement gear pump, 1.5 Gal/min at 2500 psi
• A generator set with a hydraulic pump is rated with the
Rotor: Laminated electrical steel assembly press-fitted
pump idle
to shaft, balanced; heavy insulated copper wire windings;
• When using a non-Cummins Onan pump supplied by
optimized air gap for improved waveform and motor the customer, the hydraulic pump shaft seals must be
starting; Class 200 magnet wire capable of operating in a temperature environment of
Stator: Laminated electrical steel assembly, skewed for 225° F to 250° F. Seal failure will result in equipment
improved waveform; Class 200 quadrature wire with 70% damage
more insulation over comparable generator sets
Frequency regulation No load/Full load 1.7% Constant load 1.7%
Voltage regulation No load/Full load 2.0% Constant load 1.7%

Performance you rely on. TM


cumminsonan.com
©2013 Cummins Power Generation Inc. | A-1442h (1/13)
Dimensions: in (mm)
Basic dimensions

Note: This outline drawing is provided for general reference only and is not intended for design or installation. For more information see
Operation and Installation manuals or obtain drawing 500-3449 and wiring diagram from your distributor/dealer.

Options and accessories


• Remote control start/stop rocker switch • Under floor mounting kit (P/N 405-6699)
(P/N 300-5331) • Installation template (P/N 539-2057)
• Remote control with start/stop switch and hour meter • Tailpipe kit 22 in (P/N 155-3481-01), 26 in (P/N 155-
(P/N 300-5332) 3481-02)
• Remote control with start/stop switch and DC • Exhaust tube, straight with flanged end 3 in (P/N 155-
voltmeter (P/N 300-5333) 2610), 7 in (P/N 155-2424), 12.5 in (P/N 155-2610-01)
• Remote control plug and wire harness 10 ft (P/N 338- • Exhaust elbow, tight radius 90° to route exhaust
3489-01), 30 ft (P/N 338-3489-02) through cutouts (P/N 155-3439)
• Remote harness (P/N 300-4946) pigtail harness to • EFI generator sets require a chassis-specific fuel
connect to sealed remote connector system kit. See F-1106, Cummins Onan Commercial
Mobile Accessories and Service Support Catalog

Performance you rely on. TM


cumminsonan.com
©2013 Cummins Power Generation Inc. | A-1442h (1/13)
Standards and testing After sale support
• Tested at extremes of temperature -20 °F to 120 °F for Largest distributor/dealer support network
starting and operation Cummins Onan generator sets are supported by the
• Tested installed largest and best trained worldwide certified
• Tested with commercial loads distributor/dealer network in the industry. This network
• Tested in high humidity conditions of knowledgeable Cummins Onan distributor/dealers will
• Tested in salt spray conditions help you select and install the right generator set and
• Tested in heavy airborne dust conditions accessories to meet the requirements of your specific
• Field test program
application. This same network offers a complete
• 60 Hz models meet applicable U.S. EPA and California
selection of commonly used generator set maintenance
emissions standards.
• This generator set was designed and manufactured in parts, accessories and products plus manuals and
facilities certified to ISO 9001 specification sheets. Plus, they can answer your
• CSA certified for CSA C22.2 std 100 and std 14 questions regarding proper operation, maintenance
schedules and more.

Manuals: Operation and installation manuals ship with


the generator set. To obtain additional copies or other
manuals for this model, see your Cummins Onan
distributor/dealer and request the following manual
Warranty policy numbers: Operation (A035D007), Installation
The Cummins Onan limited warranty covers virtually (A035D003), Parts (983-0202 I10), Service (A035D011).
everything except routine maintenance for the first two
years you own your generator set, or the first 2,000 To easily locate the nearest Cummins Onan
hours of operation, whichever comes first; five years on distributor/dealer in your area, or for more information,
drive system. In addition, it includes a free 90-day contact us at 1-800-888-6626 (or 763-574-5000), or visit
adjustment policy, which provides that Cummins Inc. will www.cumminsonan.com.
make minor adjustments to your new generator set
during the first three months you own it - free of charge!

! WARNING: ! WARNING:
Do not use this generator set on a Back feed to a utility system can
boat. Such use may violate U.S. cause electrocution and/or
Coast Guard regulations, and can property damage. Do not connect
result in severe personal injury or to any building electrical except
death from fire, explosion, through an approved device or
electrocution, or carbon after building main breaker is
monoxide poisoning. open.

Contact your distributor/dealer for more information.

Cummins Power Generation


1400 73rd Ave. NE
Minneapolis, MN 55432 USA
Phone 1 763 574 5000
Toll-free 1 800 888 6626
Fax 1 763 574 5298
Email www.cumminsonan.com/contact

Performance you rely on. TM

©2013 Cummins Power Generation Inc. All rights reserved.


Cummins®, Onan®, the "C" logo, Performance you rely on.™ and Quiet Diesel™are servicemarks, trademarks and/or registered
trademarks of Cummins Inc. Other company, product, or service names may be trademarks or service marks of others.
Specifications are subject to change without notice. cumminsonan.com
A-1442h (1/13)

You might also like