4WD ROUGH

TERRAIN FORKLIFT

Four-Wheel Drive Rough Terrain Forklift

with capacities of 11,000lbs

HC FORKLIFT AMERICA CORPORATION

Company address:

2021 VERSION 1/COPYRIGHT 2021

10405-A Granite Street
Charlotte, NC 28273

Toll Free(888) 652-8395

Phone(980) 888-8335
Fax(980) 888-8336 ISO9001:2015 ISO14001:2015

[email protected]
HANGCHA GROUP CO., LTD. reserves the right to make any changes without notice concerning
colors, equipment, or specifications detailed in this brochure, or to discontinue individual
Making Material Handling Easier
www.hcforkliftamerica.com models. The colors of trucks, delivered may differ slightly from those in brochures. SINCE 1956
CONCEPT Safety
/ The steering hydraulic circuit and the brake hydraulic circuit are
The Hangcha 11,000lb rough terrain forklift with 4WD was developed from the independent of each other reducing the interference between the

XF Series forklifts that Hangcha Group manufactures. It uses the reliable braking and steering systems. This creates a safer hydraulic braking
system.
Cummins diesel engine to give it the power needed to navigate through any / Designed with an accumulator, the valve in the braking system is now
safer and more reliable.
terrain. This forklift, with a 11,000lb load capacity, easily navigates through / The optional Operator Presence Sensing (OPS) system will cut off all The easy-to-open maintenance hatch provides
quick access to the engine compartment.
the rugged roads found in the stone industry, lumber industry, and at actions of the mast and running actions of the truck to increase safety
when the operator leaves the seat.
construction sites. The 4WD system works with the unique tire tread to
Comfort
provide traction in wet and slippery conditions. The 11,000lb rough terrain / Working in unison, the suspension, overhead guard, full-floating
forklift, because the road isn’t always smooth. transmission, engine shock absorbers, and the suspension seat provide
a comfortable working environment with reduced noise and vibrations.
/ The extra foot space is provided to significantly reduce operator
fatigue.
/ The non-slip step makes getting in and out of the forklift easy and safe.
Easily shift between the three forward gears to
/ A newly designed steering wheel, new brake system, and reach a top speed of 15.5 miles per hour.
easy-to-operate levers provide the operator with comfortable
operating experience.
/ This forklift is designed to provide excellent all around visibility. Upward
visibility is also great thanks to redesigned overhead guard.

Easy Maintenance
/ The floorboard’s two-piece design makes it easy to lift and remove for
access to the powertrain.
/ The radiator cover fasteners can be turned easily by hand to enable
quick inspections or servicing. The large instrument display panel is attached to
the overhead guard for clear visibility.

The oscillating steer axle allows either wheel to

step over obstacles while keeping the truck and
load level.

To achieve maximum productivity, a rough terrain

forklift operator needs to be comfortable and in
control. We’ve created a workplace that gets the
best from your operators and your machinery.
Reliability Productivity
/ The truck chassis was reinforced using CAE simulation software. The tilt cylinder and steering drive axle were also optimally designed using this The transmission system is geared to get the The new dynamic load
method. sensing hydraulic steering
/ Dual air filters and a two-stage air filter are the standard configuration to guarantee that the engine can operate reliably for a long time.
maximum performance from the Cummins system improves hydraulic
/ Deutz engine adopted the “TCI+CR+EGR+DOC” technical route so that Tier 4F emissions can be met. This is both energy-saving and environmentally diesel engine without reaching a high RPM. efficiency and reliability.
friendly. Being a turbocharged engine further enhances engine performance at low RPMs for improved power and tractive efforts. This improves fuel consumption, a reduction
/ The oil filtration return device is part of the standard configuration to extend the service life of the truck’s hydraulic elements.
in noise, and increases the engine’s life.
New, higher specification, fork mounting
means that more weight can be loaded.
This rough terrain forklift features a
manual locking differential to provide
traction during inclement weather
conditions and on rough operating
surfaces. The operator locks the
differential by pressing the switch.
This prevents power loss when one
wheel spins.

The full-floating hydraulic drive

gearbox has the function of
switching between 2WD and 4WD,
The new efficient lighting system uses LED’s and a new type of reflector to reduce Wet brakes offer the maximum amount of service
provides a higher running speed,
energy consumption. This significantly improves illumination performance while also life for your brake system without sacrificing
and has a stronger climbing ability. Front Tire Rear Tire prolonging operation time. stopping power.

Maneuverability

The 11,000lb Rough Terrain

forklift has a ground clearance
of 14.6”. This keeps the truck
moving through the roughest
of applications. Hangcha Group
also designed it to have a very
low center of gravity by
distributing the weight in the
forklift. This gives it excellent
stability when navigating
through tough terrain.
 Four Wheel Drive Rough Terrain Forklift 11,000lb Mast
1.1 Manufacturer HANGCHA GROUP CO.,LTD. Overall Height Free Lift Front Tilt Range Load Capacity Max Height Load Center 24” (600mm)
Max. Fork Overhang ISO 22915-13
Extended ISO 22915-2
HCFA Model RT50 Type Model Height Lowered in(mm) Without Backrest With Backrest FWD BWD Rough Terrain Rough Terrain
Without Backrest in(mm) With Backrest in(mm) in(mm) in(mm) in(mm) Forklift with Mast Forklift with Mast
1.2 Manufacturer's Type Designation CPCD50-XW70C-RT4 in(mm) 11000lb(5t) 11000lb(5t) 11000lb(5t) 11000lb(5t) 11000lb(5t) 11000lb(5t) (°) (°) lb(kg) lb(kg)
RTC50M300 118.1(3000) 105.7(2685) 164.7(4183) 178.5(4534) 6.3(160) 6.3(160) 28.9(735) 15 15 10360(4700) 10360(4700)
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel 6.3(160) 28.9(735) 15 15 10360(4700)
RTC50M330 129.9(3300) 111.6(2835) 176.5(4483) 190.3(4834) 6.3(160) 10360(4700)

Distinguishing

Limited Free Lift

2 Stage Mast
RTC50M350 137.8(3500) 115.5(2935) 184.4(4683) 198.2(5034) 6.3(160) 6.3(160) 28.9(735) 15 15 10360(4700) 10360(4700)
1.4 Operator Type: hand, pedestrian, standing, seated, order-picker Seated

Marks
RTC50M370 145.7(3700) 119.5(3035) 192.2(4883) 206.1(5234) 6.3(160) 6.3(160) 28.9(735) 15 15 10360(4700) 10360(4700)
1.5 Rated Capacity/Rated Load Q lb(kg) 11000( 5000) RTC50M400 157.5(4000) 125.4(3185) 204.1(5183) 217.9(5534) 6.3(160) 6.3(160) 28.9(735) 15 15 10360(4700) 10360(4700)
RTC50M450 177.2(4500) 137.2(3485) 223.8(5685) 237.6(6034) 6.3(160) 6.3(160) 28.9(735) 15 15 10472(4750) 10141(4600)
1.6 Load Centre Distance c in(mm) 24(600) RTC50M500 196.9(5000) 147(3735) 243.5(6185) 257.2(6534) 6.3(160) 6.3(160) 28.9(735) 15 15 9259(4200) 9039(4100)
RTC50N400 157.5(4000) 108.7(2760) 215.4(5470) 217.9(5534) 51.2(1300) 41.4(1051) 31.7(804) 15 15 11000(5000) 11000(5000)
1.8 Load Distance, centre of drive axle to fork x in(mm) 28.9(735)
RTC50N430 169.3(4300) 112.2(2850) 226(5740) 229.7(5834) 55.9(1420) 44.9(1141) 31.7(804) 15 15 10141(4600) 9921(4500)
RTC50N450 177.2(4500) 114.6(2910) 233.1(5920) 237.6(6034) 59.1(1500) 47.3(1201) 31.7(804) 15 15 9480(4300) 9039(4100)

3 Stage Mast
Full Free Lift
1.9 Wheelbase y in(mm) 84.6(2150)
RTC50N480 189(4800) 118.5(3010) 244.9(6220) 249.4(6334) 63(1600) 51.2(1301) 31.7(804) 15 15 9039(4100) 8598(3900)
2.1 Service Weight lb(kg) 19620(8900) RTC50N500 196.9(5000) 120.5(3060) 251.9(6399) 257.2(6534) 65.8(1671) 53.2(1351) 31.7(804) 10 15 8598(3900) 7716(3500)
RTC50N550 216.5(5500) 128.3(3260) 274.4(6970) 276.9(7034) 70.9(1800) 61.1(1551) 31.7(804) 10 15 7055(3200) 5732(2600)

Weight
2.2 Axle Loading, laden front/rear lb(kg) 27100/3520(12300/1600) RTC50N600 236.2(6000) 134.3(3410) 292.1(7420) 296.6(7534) 78.7(2000) 67(1701) 31.7(804) 10 15 6173(2800) 5071(2300)
RTC50N650 255.9(6500) 140.2(3560) 316.3(8034) 311(7899) 85.5(2171) 80(2036) 31.7(804) 10 15 5071(2300) 3968(1800)
2.3 Axle Loading, unladen front/rear lb(kg) 9370/10250(4250/4650)
With sideshifter, subtract 880lb’s(400kg). With integral sideshifter, subtract 660lb’s (300kg).
3.1 Tires: solid rubber, superelastic, pneumatic, polyurethane Pneumatic

3.2 Tire Size, front 445/65-22.5

TIres & Chassis

3.3 Tire Size, rear 12.5/80-18
11000
3.5 Wheels, number front / rear (x = driven wheels) 4x4
9921
3.6 Tread, front b10 in(mm) 65.3(1660)

3.7 Tread, rear b11 in(mm) 69.3(1760)

8819

4.1 Tilt of Mast/Fork Carriage Forward/Backward α/β(°) 15/15 7716

Standard Specification 4.2 Height, mast lowered h1 in(mm) 104.6(2685) 6614

4.3 Free Lift h2 in(mm) 10.2(260)
5512
Counterweight Grill 4.4 Lift h3 in(mm) 118.1(3000) 24 27.6 31.5 35.4 39.4 43.3 47.2
Full Suspension Seat 4.5 Height, mast extended h4 in(mm) 178.5(4534)
Pre-Cleaner 4.7 Height of Overhead Guard (Cabin) h6 in(mm) 101.4(2575)
Overhead Guard Exhaust
4.19 Overall Length l1 in(mm) 191.5(4865)
Fuel Tank Cap (with lock)
4.20 Length to Face of Forks l2 in(mm) 144.3(3665)
Fan Protection Device

Dimensions
4.21 Overall Width b1 in(mm) 82.9(2105)
Rear Workling Light
4.22 Fork Dimensions ISO 2331 s/e/l in(mm) 2.4×5.9×47.2(60×150×1200)
Strobe Light
4.23 Fork Carriage DIN 15 173 --- ISO 2328, class/type A,B B
Emergency Switch
Right and Left Reflective Mirrors 4.24 Fork-Carriage Width b3 in(mm) 76.8(1950)

PVC Roof 4.25 Distance between Fork-Arms b5 in(mm) 11.4-76.8(290-1950)

Wet Brakes 4.31 Ground Clearance, laden, below mast m1 in(mm) 15.1(385)

Reverse Grip with Horn 4.32 Ground Clearance, centre of wheelbase m2 in(mm) 14.6(370)

Operator Presence Sensing System (OPS) 4.34 Aisle Width Ast in(mm) 248(6305)

4.35 Turning Radius Wa in(mm) 163.4(4150)

Options 5.1 Travel Speed, laden/unladen mph(km/h) 15.5/15.5(25/25)

5.2 Lift Speed, laden ft/min(m/s) 88.6/102.4(0.45/0.52)

Front Windshield and Wipers
5.3 Lowering Speed, laden ft/min(m/s) 98.4/84.7(0.5/0.43)
Full Cabin

Performance
Data
5.5 Drawbar Pull, laden N 95000
Solid Pneumatic Tires
5.7 Gradeability, laden % 55
3rd/4th/5th Valve
Blue Light 5.10 Service Brake Hydraulic

Heater Parking Brake Mechanical

Air Conditioning 7.1 Engine Manufacturer/Type QSF3.8t3TC115

Operator Fan 7.2 Engine Power According to DIN ISO 1585 hp/r/min(kw/r/min) 115/2200(86/2200)
Combustion

Side Shifter
Engine

7.3 Rated Speed N·m/r/min 470/1100-1700

Side Shifter & Fork Positioner 7.4 Number of Cylinders/Displacement (-)/(cm³) 4/3760

7.10 Battery Voltage/Nominal Capacity V/Ah 24/90

Additional

10.3 Hydraulic Tank - capacity (drain & refill) gal(liter) 30.4(115)

Data

10.4 Fuel Tank Capacity gal(liter) 31.7(120)