FOURTH QUARTER EXAMINATION

TLE 5
Prepared by: Ms. Carla Angeli S. Ferrer
Score:

NAME:

II. IDENTIFICATION
Directions: Read each statement carefully. Choose your answer inside the box. Write your answer in
the space provided before each number. (10 pts)
_____________1. Using a meter, hold it firmly, stretch is straight starting at the beginning point of
measurement.
_____________2. Use the type of scissors appropriate for the material you are cutting.
_____________3. Use the right kind of hammer for the kind of nail to be hammered.
_____________4. This is basic working processes where in it position the wood on a stable working
bench.
_____________5. You need this to cut the wood and a mallet to drive the chisel into the wood.
_____________6. This is the process of removing lint and rough edges of the wood.
_____________7. This is the process of applying paint, vanish hand other coloring materials to
improved the appearance of the project.
_____________8. This comes from treated skin of various animals like cows, carabaos, goats, and
crocodiles.
_____________9. This are tools that measure the length, width, thickness, and height objects and
materials.
____________10. This are tools used either to cut a material or hold a material or object in place.

Measuring tools Leather craft Finishing Smoothening Chiseling

Sawing Nailing Cutting Measurement Cutting and

holding tools

III. TRUE OR FALSE

Directions: Write TRUE if the sentence is correct or FALSE if the sentence is correct. (10 pts)

_________1. The two areas in Industrial works are general industries and handicrafts.
_________2. The Philippines is rich in straw materials which can be used in handicrafts.
_________3. Driving tools include the meter stick, zigzag ruler, tape measure and push-
pull rule.
_________4. Tools and equipment need in handicraft can be classified in measuring tools,
driving tools, cutting and holding tools and boring and scraping tools.
_________5. Measuring tools are used to determine the length, width and the thickness of
different materials.
_________6. Things needed in a nursery are seeds, seed boxes with stand, gravel or stones,
and garden oil.
_________7. Cutting and holding tools include crosscut saw, hacksaw, backsaw, keyhole
saw, C-clamp, pliers, bench vise and monkey wrench.
_________8. Boring and stomping tools include hand drill, chisel, and smooth iron plane.
_________9. Tools should be kept in a tool box according to classification, size and use.
_________10. Clean tool only in use. Wash and wipe dry. Oil when needed.

III. SEQUENCING
Direction: Arrange the following steps in Health and Safety Practices while working and procedure
in varnishing. Write your answer on the space provided.
CORE VALUES : CLEAR 2023
Christ-centered, Leadership, Excellence, Accountability, Resilience Page|1
 Procedure in Varnishing (10 pts)

_____Apply Varnish using brush or spray. Apply evenly throughout the surface.
_____Choose the type of varnish desired.
_____Clean the parts to be varnish.
_____Do staining or coloring wood before varnishing.
_____Dry the first coating before applying second coating.

Health and Safety Practices While Working. (16 pts)

_____Use the right tool for the job. It makes work easy and good quality.
_____Wear personal protective attire while working.
_____Check you tools if they are in good condition before using them.
_____Focus on what you are doing. Give full attention to it.
_____Have all the right tools and materials within reach to save time and energy.
_____Know the steps before executing them.
_____Work in well- ventilated, well- lighted, clean and orderly surrounding.
_____Clean tools after used and store in the toolbox and cabinet.

IV. IDENTIFICATION
Directions: Classify the tools that being asked. Write MT if it is belongs to measuring tools, DT if
it is driving tools and CH if it is belong to cutting and holding tools.

_______ 1. Monkey wrench _______6. Marking gauge 11. Backsaw

_______2. Hammer _______7. Scew driver 12. Push-pull rule
_______3. C-Clamp _______8. Hammer 13. Mallet
_______4. Steel square _______9. Pliers 14. Meter stick
_______5. Meter stick _______10. Key-hole saw 15. Crossout saw

V. FILL-IN-THE- BLANK
Directions: Fill in the blanks. Choose your answer inside the box. (10 pts)

academy environment responsibility

students think Christ

MISSION 2035

The ___________ is dedicated to fostering a holistic learning ____________ that promotes the academic

excellence, ethical leadership, and social responsibility. Through inclusive education, it empowers

___________ to seek the truth, ___________ critically, lead with compassion, and uphold _________-

centered values in addressing national and global challenges.

“Learn from yesterday. Live for today. Hope for tomorrow.” -Albert Einstein
CORE VALUES : CLEAR 2023
Christ-centered, Leadership, Excellence, Accountability, Resilience Page|2
CORE VALUES : CLEAR 2023
Christ-centered, Leadership, Excellence, Accountability, Resilience Page|3
CORE VALUES : CLEAR 2023
Christ-centered, Leadership, Excellence, Accountability, Resilience Page|4