NON-RETURN VALVE

SERIES-MI11

MESON Valves India Ltd

Your Complete Flow Control Solution.
NON- RETURN VALVES

MESON Valves India Ltd

 NON-RETURN VALVE

INTRODUCTION:
Non-Return Valves are automatic in operation and designed to prevent reversal of flow in fluid
piping systems. The valves are maintained open by the flow of fluid in the forward direction and
are closed by back pressure of the fluid or by the weight of the closing mechanism or by a spring
force.

TYPE OF NON - RETURN VALVE

• SWING CHECK VALVE: A swing check valve allows forward flow and blocks the
reverse flow. It provides a strong option for uni-directional homogenous flow
applications. It returns to the valve seat when the flow stops to prevent backflow.
a) Wafer type
b) Short pattern

• LIFT CHECK VALVE:

Lift check valves are valves that belong to check valve category. They ensure that the piping
does not run empty even after a pump has been switched off. The lift check valve opens when
the fluid handled flows through the piping in the specified direction and closes when it starts to
flow in the other direction.

• DUAL PLATE CHECK VALVE: Dual plate check valves, or duplex check valves, are
crucial elements in fluid control systems. They feature two hinged plates that pivot to regulate
flow, providing efficient, reliable, and versatile operation. Their design allows for quick response
to flow changes, minimizing backflow and water hammer risks. these valves are characterized
by a low pressure drop, compact size, and lightweight construction, making them easy to install
in various configurations. They are typically made from corrosion-resistant materials,
enhancing their durability in tough environments.

MESON Valves India Ltd

 NON-RETURN VALVE

SWING CHECK VALVE: A swing check valve allows forward flow and blocks the reverse flow. It
provides a strong option for uni-directional homogenous flow applications. It returns to the valve
seat when the flow stops to prevent backflow.

KEY FEATURE
• Effective Flow Control. Swing check valves provide efficient fluid flow control,
allowing for unidirectional flow and preventing backflow.
• Easy Maintenance.
• Suitable for Various Fluids.
• Self-operating.
DESIGN SPECIFICATIONS:

• Design: ASME B16.34, DME463, API 6D

• Face to face: ASME B16.10, BS EN 558, DME463.
• Testing: EN 12266-1, API 598
• Flange drilling: ASME B16.5, EN 1092-1
• Pressure rating: ASME B16.34.

No. Part Material

1 BODY ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
2 BONNET ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
3 BODY SEAT ASTM A216 Gr.WCB + 13%Cr. OR ST6 /ASTM A351 Gr.CF8M
4 DISC ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
5 DISC SEAL ASTM A216 Gr.WCB + 13%Cr. OR ST6 /ASTM A351 Gr.CF8M
6 STEM ASTM A276 Gr.410/ASTM A276 Gr.316/ASTM A479 Gr.316
7 HINGE ARM ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
8 BONNET GASKET VITON / GRAPHITE/ ASBESTOS FREE
9 BOLT ASTM A193 Gr. B7/B7M/B8/B8M/L7/ ASTM A320 Gr. L7
10 NUT ASTM A194 Gr.2H/2HM/8/8M/7

Swing check valve

Valve size Flange Drilling Appx. Weight
L H
Inch DN ØD Hcd n x Ød (kg)
1 DN25 127 115 85 4X14 90 5.0
1 1/4 DN32 146 140 100 4X18 90 7.0
1 1/2 DN40 165 150 110 4X18 90 8.0
2 DN50 203 165 125 4X18 105 12
2 1/2 DN65 216 185 145 4X18 120 18
3 DN80 241 200 160 8X18 145 21
4 DN100 292 220 180 8X18 160 26
5 DN125 330 250 210 8X18 165 37
6 DN150 356 285 240 8X22 300 90
8 DN200 495 340 295 8X22 320 120
10 DN250 622 395 350 12X22 365 165
12 DN300 698 445 400 16X22 420 265

MESON Valves India Ltd

 NON-RETURN VALVE

SWING CHECK VALVE (WAFER TYPE): The wafer type swing check valve is ideal for pump
discharge duties. The eccentric mounted hinge pin in combination with the disc seat guarantees
a positive shut off of the returning media.it is suitable for mounting between weld neck or slip on
type companion flanges of different standards.

KEY FEATURE
• Fully coated body avoids corrosion.
• Do not need any maintenance, easy to make spare part
replacements
• Its compact design saves space
• light weight, easy to install and budget friendly

DESIGN SPECIFICATIONS:

• Design: ASME B16.34, DME463, & API 6D

• Face to face: ASME B16.10, BS EN 558, DME463.
• Testing: API 598, EN 12266-1,
• Flange drilling: EN 1092-1, ASME B16.5
• Pressure rating: ASME B16.34

No. Part Material

1 BODY ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
2 DISC ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
3 COVER ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
4 SCREW ASTM A276 Gr. 410 / ASTM A276 Gr. 316
5 EYE BOLT ASTM A193 Gr. B7/B7M/B8/B8/ ASTM A320 Gr. L7
6 “O” RING PTFE/RPTFE/EPDM/VITON
7 “O” RING 2 PTFE/RPTFE/EPDM/VITON

Swing check valve, Wafer type

Valve Size Flange Drilling

Appx. Weight (kg)
Inch DN L ØD ØD1
1 1/4 DN32 14 84 19 0.8
1 1/2 DN40 14 94 22 0.9
2 DN50 14 109 32 1.0
2 1/2 DN65 14 129 40 1.2
3 DN80 14 144 58 1.5
4 DN100 18 164 70 2.5
5 DN125 18 194 92 3.3
6 DN150 20 220 115 4.7
8 DN200 22 275 158 7.8
10 DN250 26 330 200 13
12 DN300 32 380 227 19

MESON Valves India Ltd

 NON-RETURN VALVE

SWING CHECK VALVE (SHORT PATTERN): Short Pattern swing check valve is also called as
full port and compact type valve. allows fluid to pass through without significant restriction,
ensuring minimal pressure drop and maintaining the full flow area of the pipeline.

KEY FEATURE
• Lightweight.
• Extremely compact.
• Tight shut-off.
• Low maintenance.
• Retained disc.
• Single moving part.

DESIGN SPECIFICATIONS:

• Design: ASME B16.34, DME463, & API 6D

• Face to face: ASME B16.10, BS EN 558, DME463.
• Testing: EN 12266-1, API 598
• Flange drilling: ASME B16.5, EN 1092-1
• Pressure rating: ASME B16.34

No. Part Material

1 BODY ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
2 DISC ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
3 DISC SEAL RING ASTM A216 Gr.WCB + 13%Cr. OR ST6 /ASTM A351 Gr.CF8M
4 BODY SEAL RING VITON /GRAPHITE/PTFE/RPTFE

Swing check valve, short type

Valve Size Flange Drilling Appx. Weight

Inch DN L ØD Hcd n x Ød (kg)
1 DN25 70 115 85 4X14 3.0
1 1/4 DN32 75 140 100 4X18 5.0
1 1/2 DN40 80 150 110 4X18 6.0
2 DN50 85 165 125 4X18 7.0
2 1/2 DN65 105 185 145 4X18 9.0
3 DN80 125 200 160 8X18 11
4 DN100 145 220 180 8X18 16
5 DN125 170 250 210 8X18 21
6 DN150 200 285 240 8X22 29
8 DN200 255 340 340 8X22 45
10 DN250 310 395 395 12X22 64
12 DN300 360 445 445 12X22 79

MESON Valves India Ltd

 NON-RETURN VALVE

LIFT CHECK VALVE: Lift Check Valves prevent reverse flow or backflow of liquid and ensuring
smooth, uninterrupted flow through the system. The operation of a lift check valve is entirely
automated, relying on gravity and media pressure to work. The lift check valve uses a free-moving
closure element that is placed above the seat. It prevents backflow and maintains pressure.

KEY FEATURE
• Regulating flow and pressure within a piping system.
• Improving safety through relieving pressure or vacuum in
a piping system.
• a corrosion resistant seat.

DESIGN SPECIFICATIONS:

• Design: ASME B16.34, DME463, API 6D

• Face to face: ASME B16.10, BS EN 558, DME463.
• Testing: API 598, EN 12266-1
• Flange drilling: ASME B16.5, EN 1092-1
• Pressure rating: ASME B16.34

No. Part Material

1 BODY ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
2 BONNET ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
3 SEAT RPTFE/PTFE/EPDM/NBR
4 DISC ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
5 BONNET GASKET VITON B/GRAPHITE
6 STUD BOLT ASTM A193 Gr. B7/B7M/B8/B8M/ ASTM A320 Gr. L7
7 NUT ASTM A194 Gr.2H/2HM/8/8M/7/4
8 SPRING ASTM A26 Gr. SS316/ASTM A240 Gr. SS304

Lift check valve

Valve Size Flange Drilling Appx.
L H
Inch DN ØD Hcd n x Ød Weight (kg)
1 DN25 160 115 85 4X14 65 4.5
1 1/4 DN32 180 140 100 4X18 75 5.5
1 1/2 DN40 200 150 110 4X18 80 9.0
2 DN50 230 165 125 4X18 85 11
2 1/2 DN65 290 185 145 4X18 95 15
3 DN80 310 200 160 8X18 115 24
4 DN100 350 220 180 8X18 140 32
5 DN125 400 250 210 8X18 160 48
6 DN150 480 285 240 8X22 200 65
8 DN200 550 340 295 8X22 245 98
10 DN250 600 395 350 12X22 290 120
12 DN300 730 445 400 12X22 345 190

MESON Valves India Ltd

 NON-RETURN VALVE

DUAL PLATE CHECK VALVE: Dual plate check valves, or duplex check valves, are crucial elements
in fluid control systems. They feature two hinged plates that pivot to regulate flow, providing efficient,
reliable, and versatile operation. Their design allows for quick response to flow changes, minimizing
backflow and water hammer risks.

KEY FEACTURE
• Dual plate design with quick opening and closing.
• Much stronger, lighter in weight and smaller in size.
• Can be installed horizontally and vertically.
• Efficient and positive sealing under most flow and
pressure conditions.

DESIGN SPECIFICATIONS:

• Design: ASME B16.34, DME463, & API 6D

• Face to face: ASME B16.10, BS EN 558, DME463.
• Testing: EN 12266-1, API 598
• Flange drilling: ASME B16.5, EN 1092-1

No. Part Material

1 BODY ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
2 DISC ASTM A216 Gr.WCB/ASTM A351 Gr.CF8M/CF3M/A352 Gr.LCB
3 SEAT RPTFE/PTFE
4 STEM ASTM A276 Gr.410/ASTM A276 Gr.316/ ASTM A479 Gr.316
5 SPRING ASTM A26 Gr. SS316/ASTM A240 Gr. SS304

Dual Plate Check Valve

Valve Size Flange Drilling Appx. Weight
L T
Inch DN ØD ØD1 ØD2 ØD3 (kg)
2 DN50 43 107 65 43.3 40 19 1.5
2 1/2 DN65 46 127 80 60.2 60 20 2.4
3 DN80 64 142 94 66.4 70 28 3.6
4 DN100 64 162 117 90.8 88 27 5.7
5 DN125 70 192 145 117 115 30 7.3
6 DN150 76 218 170 144.6 134 31 9
8 DN200 89 273 224 198.2 182 33 17
10 DN250 114 328 265 234 220 37 26
12 DN300 114 378 310 284 260 43 42

MESON Valves India Ltd