GE

Grid Solutions

MiCOM P40 Agile

P645

MICS
Model Implementation Conformance Statement

Publication reference: P645-MC-EN-2.3

MiCOM P645 MICS

CONTENTS

1 MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) 5

1.1 Introduction 5
1.2 Objective 5
1.3 Logical Device definitions 5
1.3.1 IEC 61850 Logical Device data model 5
1.4 Logical Node definitions 10
1.4.1 Logical Node: GGIO_ALM_96 12
1.4.2 Logical Node: GGIO_ANAL_10 14
1.4.3 Logical Node: GGIO_ANAL_4 14
1.4.4 Logical Node: GGIO_IND_10 15
1.4.5 Logical Node: GGIO_IND_18 15
1.4.6 Logical Node: GGIO_IND_24 16
1.4.7 Logical Node: GGIO_IND_32 17
1.4.8 Logical Node: GGIO_IND_32_CTRL 18
1.4.9 Logical Node: GGIO_IND_4 19
1.1.1 Logical Node: GGIO_IND_40 19
1.4.10 Logical Node: GGIO_IND_64 20
1.4.11 Logical Node: GGIO_IND_64_ORDRUN 22
1.4.12 Logical Node: GGIO_USER_ALM_32 23
1.4.13 Logical Node: LLN0_P643_P645 24
1.4.14 Logical Node: LLN0_STANDARD 25
1.4.15 Logical Node: LLN0_SYSTEM 25
1.4.16 Logical Node: LPHD_STANDARD 26
1.4.17 Logical Node: MDIF_LZD 26
1.4.18 Logical Node: MDIF_XFR_1 26
1.4.19 Logical Node: MDIF_XFR_2_3 26
1.4.20 Logical Node: MLFR_FAULT_RECORD_1 27
1.4.21 Logical Node: MLFR_FAULT_RECORD_2 27
1.4.22 Logical Node: MMTR_EFL 28
1.4.23 Logical Node: MMTR_LOL 28
1.4.24 Logical Node: MMXU_FOURIER 28
1.4.25 Logical Node: MMXU_FOURIER_WINDING 29
1.4.26 Logical Node: MMXU_HZD 29
1.4.27 Logical Node: MMXU_LOL 29
1.4.28 Logical Node: MMXU_MSI 30
1.4.29 Logical Node: MMXU_POWER 30
1.4.30 Logical Node: MMXU_RMS 30
1.4.31 Logical Node: MMXU_RMS_PHV 31
1.4.32 Logical Node: MMXU_SECOND_HARMONIC 31
1.4.33 Logical Node: MMXU_THM 31
1.4.34 Logical Node: MMXU_VHZ 31
1.4.35 Logical Node: MSTA_DEMAND 32

P645-MC-EN-2.3 1
MICS MiCOM P645

1.4.36 Logical Node: PDIF_NEU 32

1.4.37 Logical Node: PDIF_NEU_SEG 32
1.4.38 Logical Node: PDIF_NEU_SEG_NO_STR 33
1.4.39 Logical Node: PHAR_BASIC_SEG 33
1.4.40 Logical Node: PTOC_NEU 33
1.4.41 Logical Node: PTOC_NO_SEG 33
1.4.42 Logical Node: PTOC_SEG 34
1.4.43 Logical Node: PTOF_NO_SEG 34
1.4.44 Logical Node: PTOV_NO_SEG 34
1.4.45 Logical Node: PTOV_SEG 34
1.4.46 Logical Node: PTRC_NO_SEG 35
1.4.47 Logical Node: PTTR_NO_SEG 35
1.4.48 Logical Node: PTUC_NEU 35
1.4.49 Logical Node: PTUF_NO_SEG 35
1.4.50 Logical Node: PTUV_SEG 36
1.4.51 Logical Node: PVOC_SEG 36
1.4.52 Logical Node: PVPH_STANDARD 36
1.4.53 Logical Node: PVRO_SEG 36
1.4.54 Logical Node: RBRF_STANDARD 37
1.4.55 Logical Node: RDRE_BASIC 37
1.5 Common Data Class definitions 37
1.5.1 Common Data Class: ACD_NO_SEG 38
1.5.2 Common Data Class: ACD_SEG 38
1.5.3 Common Data Class: ACT_NO_SEG 39
1.5.4 Common Data Class: ACT_SEG 39
1.5.5 Common Data Class: BCR_MMTR 39
1.5.6 Common Data Class: CMV_MAG_ANG_FLOAT 39
1.5.7 Common Data Class: CMV_MAG_FLOAT 40
1.5.8 Common Data Class: DEL_SEG_ANG 40
1.5.9 Common Data Class: DEL_SEG_D_NS 40
1.5.10 Common Data Class: DPL_STANDARD 40
1.5.11 Common Data Class: INC_MOD 41
1.5.12 Common Data Class: INC_MOD_D_PRIV 41
1.5.13 Common Data Class: INC_MOD_PRIV 41
1.5.14 Common Data Class: INS_BASIC 41
1.5.15 Common Data Class: INS_BEH 42
1.5.16 Common Data Class: INS_BEH_D_PRIV 42
1.5.17 Common Data Class: INS_BEH_PRIV 42
1.5.18 Common Data Class: INS_HEALTH 42
1.5.19 Common Data Class: INS_HEALTH_PRIV 43
1.5.20 Common Data Class: LPL_LLN0 43
1.5.21 Common Data Class: LPL_LN 43
1.5.22 Common Data Class: LPL_LN_P_NS 43
1.5.23 Common Data Class: MV_FLOAT 44
1.5.24 Common Data Class: MV_FLOAT_D 44
1.5.25 Common Data Class: MV_FLOAT_D_NS 44

2 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.26 Common Data Class: MV_FLOAT_NS 45

1.5.27 Common Data Class: SEQ_MAG_D_NS 45
1.5.28 Common Data Class: SPC_CONTROL 45
1.5.29 Common Data Class: SPC_CTRL_PRIV 46
1.5.30 Common Data Class: SPS_D 46
1.5.31 Common Data Class: SPS_WD 46
1.5.32 Common Data Class: SPS_WD_NS 46
1.5.33 Common Data Class: WYE_RES_ANG_D_NS 47
1.5.34 Common Data Class: WYE_RES_MAG_NS 47
1.5.35 Common Data Class: WYE_SEG 47
1.5.36 Common Data Class: WYE_SEG_ANG 47
1.5.37 Common Data Class: WYE_SEG_D_NS 47
1.5.38 Common Data Class: WYE_SEG_NS 48
1.5.39 Common Data Class: WYE_SEG_RES_D_NS 48
1.6 Common data attribute type definitions 48
1.6.1 Component: AnalogueValue_Float 48
1.6.2 Component: Originator 48
1.6.3 Component: RangeConfig_Deadband 49
1.6.4 Component: Unit 49
1.6.5 Component: Unit_Multiplier 49
1.6.6 Component: Vector_Magnitude_Float 49
1.6.7 Component: Vector_MagnitudeAngle_Float 49
1.7 Enumerated type definitions 50
1.7.1 Enumerated type: AddCause 50
1.7.2 Enumerated type: Beh 50
1.7.3 Enumerated type: ctlModel 50
1.7.4 Enumerated type: dir 51
1.7.5 Enumerated type: Health 51
1.7.6 Enumerated type: Mod 51
1.7.7 Enumerated type: multiplier 51
1.7.8 Enumerated type: orCategory 52
1.7.9 Enumerated type: seqT 52
1.7.10 Enumerated type: SIUnit 52
1.8 MMS data-type conversions 54

P645-MC-EN-2.3 3
MICS MiCOM P645

4 P645-MC-EN-2.3
MiCOM P645 MICS

1 MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)

1.1 Introduction
This specification is the Model Implementation Conformance Statement (MICS) and presents the top-
level IEC 61850 data model that has been implemented. The definitions of all used Logical Nodes
and their associated Common Data Classes, components and associated enumerated values are also
included for completeness.
The reader is expected to be conversant with the terminology presented within the IEC 61850 part 7
series of specifications.

1.2 Objective
To provide comprehensive details of the standard data object model elements supported by the
device. The MICS is conformant to the devices associated ICD (Substation Configuration Language)
file, according to part 6 of the IEC 61850 standards. The layout of the presented tables within this
document are conformant to the part 7 series of the IEC 61850 standard specifications with the
following exceptions:
• The "Trigger Options" field is not presented
• The "M/O" field is not present as the definitions are as deployed within the model
• An additional column "X" is used to signify ALSTOM custom attributes

1.3 Logical Device definitions

The MiCOM relay implements an IEC 61850 server that can contain one or more Logical Devices.
Each Logical Device contains a data model built from instances of specific Logical Nodes and must
consist of at least an instance of the LPHD Logical Node (which is responsible for providing physical
device information) and an instance of the LLN0 Logical Node (for addressing common issues across
the Logical Device).
The IEC 61850 data model is contained within the Logical Devices detailed in the table below. All
MiCOM devices will name the supported Logical Devices consistently to ensure that data model
variables with the same purpose will have the same name within each MiCOM server.
Logical Device Comment/Usage
Measurements P645 Measurements
Protection P645 Protection
Records P645 Records
System P645 System

1.3.1 IEC 61850 Logical Device data model

The IEC 61850 Logical Device top-level data model consists of instances of Logical Nodes. The data
model name for a Logical Node instance is constructed from an optional prefix (known as the
wrapper), the Logical Node name, and an instance ID (or suffix).
The presented data model is in an alphabetically sorted order, rather than a logical order, because this
is the natural order of the data when presented by a native MMS browser. (Higher level browsers can
of course impart any ordering that they desire).
LD LN Instance LN Type Description
Measurements
CliMsiGGIO1 GGIO_ANAL_4 CLIO Measurements
LLN0 LLN0_STANDARD Measurements Logical Device
LolMMTR1 MMTR_LOL Loss of Life (Transformer) Meter Values

P645-MC-EN-2.3 5
MICS MiCOM P645

LD LN Instance LN Type Description

LolMMXU1 MMXU_LOL Loss of Life (Transformer) Measurements
LPHD1 LPHD_STANDARD Physical Device Information
PriEflMMTR1 MMTR_EFL Primary Energy Flow Metering
PriFltMLFR1 MLFR_FAULT_RECORD_1 Measurements during the Latest Fault Record
PriFltMLFR2 MLFR_FAULT_RECORD_2 Measurements during the Latest Fault Record
PriFouMMXU1 MMXU_FOURIER Primary Fourier derived Measurements
PriFouMMXU2 MMXU_FOURIER_WINDING Primary HV Winding Fourier Measurements
PriFouMMXU3 MMXU_FOURIER_WINDING Primary LV Winding Fourier Measurements
PriFouMMXU4 MMXU_FOURIER_WINDING Primary TV Winding Fourier Measurements
PriFxdMSTA1 MSTA_DEMAND Primary Fixed Demand Values
PriHa2MMXU1 MMXU_SECOND_HARMONIC HV Primary Second Harmonic Measurements
PriHa2MMXU2 MMXU_SECOND_HARMONIC LV Primary Second Harmonic Measurements
PriHa2MMXU3 MMXU_SECOND_HARMONIC TV Primary Second Harmonic Measurements
PriHzdMMXU1 MMXU_HZD HV Winding High Impedance Primary Values
PriHzdMMXU2 MMXU_HZD LV Winding High Impedance Primary Values
PriHzdMMXU3 MMXU_HZD TV Winding High Impedance Primary Values
PriHzdMMXU4 MMXU_HZD Auto Transformer High Impedance Primary Values
PriLzdMDIF1 MDIF_LZD HV Winding Low Impedance Primary Differential Values
PriLzdMDIF2 MDIF_LZD LV Winding Low Impedance Primary Differential Values
PriLzdMDIF3 MDIF_LZD TV Winding Low Impedance Primary Differential Values
PriLzdMDIF4 MDIF_LZD Auto Transformer Low Impedance Primary Differential Values
PriMsiMMXU1 MMXU_MSI Primary Measured Input Values for CT1
PriMsiMMXU2 MMXU_MSI Primary Measured Input Values for CT2
PriMsiMMXU3 MMXU_MSI Primary Measured Input Values for CT3
PriMsiMMXU4 MMXU_MSI Primary Measured Input Values for CT4
PriMsiMMXU5 MMXU_MSI Primary Measured Input Values for CT5
PriPkdMSTA1 MSTA_DEMAND Primary Peak Demand Values
PriPwrMMXU1 MMXU_POWER Primary Power Measurements
PriRmsMMXU1 MMXU_RMS_PHV Primary Phase to Ground Voltage Measurements
PriRmsMMXU2 MMXU_RMS Primary RMS Measurements for HV
PriRmsMMXU3 MMXU_RMS Primary RMS Measurements for LV
PriRmsMMXU4 MMXU_RMS Primary RMS Measurements for TV
PriRodMSTA1 MSTA_DEMAND Primary Rolling Demand Values
PriVhzMMXU1 MMXU_VHZ Primary Volts-per-Herz Measurements - Winding 1
PriVhzMMXU2 MMXU_VHZ Primary Volts-per-Herz Measurements - Winding 2
RtdGGIO1 GGIO_ANAL_10 RTD Analogue Values
SecEflMMTR1 MMTR_EFL Secondary Energy Flow Metering
SecFouMMXU1 MMXU_FOURIER Secondary Fourier derived Measurements
SecFouMMXU2 MMXU_FOURIER_WINDING Secondary HV Winding Fourier Measurements
SecFouMMXU3 MMXU_FOURIER_WINDING Secondary LV Winding Fourier Measurements
SecFouMMXU4 MMXU_FOURIER_WINDING Secondary TV Winding Fourier Measurements
SecFxdMSTA1 MSTA_DEMAND Secondary Fixed Demand Values
SecHa2MMXU1 MMXU_SECOND_HARMONIC HV Secondary Second Harmonic Measurements
SecHa2MMXU2 MMXU_SECOND_HARMONIC LV Secondary Second Harmonic Measurements

6 P645-MC-EN-2.3
MiCOM P645 MICS

LD LN Instance LN Type Description

SecHa2MMXU3 MMXU_SECOND_HARMONIC TV Secondary Second Harmonic Measurements
SecHzdMMXU1 MMXU_HZD HV Winding High Impedance Secondary Values
SecHzdMMXU2 MMXU_HZD LV Winding High Impedance Secondary Values
SecHzdMMXU3 MMXU_HZD TV Winding High Impedance Secondary Values
SecHzdMMXU4 MMXU_HZD Auto Transformer High Impedance Secondary Values
SecLzdMDIF1 MDIF_LZD HV Winding Low Impedance Secondary Differential Values
SecLzdMDIF2 MDIF_LZD LV Winding Low Impedance Secondary Differential Values
SecLzdMDIF3 MDIF_LZD TV Winding Low Impedance Secondary Differential Values
SecLzdMDIF4 MDIF_LZD Auto Transformer Low Impedance Secondary Differential Values
SecMsiMMXU1 MMXU_MSI Secondary Measured Input Values for CT1
SecMsiMMXU2 MMXU_MSI Secondary Measured Input Values for CT2
SecMsiMMXU3 MMXU_MSI Secondary Measured Input Values for CT3
SecMsiMMXU4 MMXU_MSI Secondary Measured Input Values for CT4
SecMsiMMXU5 MMXU_MSI Secondary Measured Input Values for CT5
SecPkdMSTA1 MSTA_DEMAND Secondary Peak Demand Values
SecPwrMMXU1 MMXU_POWER Secondary Power Measurements
SecRmsMMXU1 MMXU_RMS_PHV Secondary Phase to Ground Voltage Measurements
SecRmsMMXU2 MMXU_RMS Secondary RMS Measurements for HV
SecRmsMMXU3 MMXU_RMS Secondary RMS Measurements for LV
SecRmsMMXU4 MMXU_RMS Secondary RMS Measurements for TV
SecRodMSTA1 MSTA_DEMAND Secondary Rolling Demand Values
SecVhzMMXU1 MMXU_VHZ Secondary Volts-per-Herz Measurements - Winding 1
SecVhzMMXU2 MMXU_VHZ Secondary Volts-per-Herz Measurements - Winding 2
ThmMMXU1 MMXU_THM Thermal Measurements
XfrDifMDIF1 MDIF_XFR_1 Transformer Differential Values
XfrDifMDIF2 MDIF_XFR_2_3 Transformer Differential values - 2nd Harmonic
XfrDifMDIF3 MDIF_XFR_2_3 Transformer Differential values - 5th Harmonic
Protection
Cbf1RBRF1 RBRF_STANDARD CT1 CB Fail 1
Cbf2RBRF1 RBRF_STANDARD CT2 CB Fail 1
Cbf3RBRF1 RBRF_STANDARD CT3 CB Fail 1- P643/P645
Cbf4RBRF1 RBRF_STANDARD CT4 CB Fail 1- only for P645
Cbf5RBRF1 RBRF_STANDARD CT5 CB Fail 1- only for P645
CliAlmPTUC1 PTUC_NEU CLIO Input 1 Alarm
CliAlmPTUC2 PTUC_NEU CLIO Input 2 Alarm
CliAlmPTUC3 PTUC_NEU CLIO Input 3 Alarm
CliAlmPTUC4 PTUC_NEU CLIO Input 4 Alarm
CliBlkGGIO1 GGIO_IND_4 Current Loop Blocked signals
CliTrpPTUC1 PTUC_NEU Current Loop Input 1 Trip
CliTrpPTUC2 PTUC_NEU Current Loop Input 2 Trip
CliTrpPTUC3 PTUC_NEU Current Loop Input 3 Trip
CliTrpPTUC4 PTUC_NEU Current Loop Input 4 Trip
DifPDIF1 PDIF_NEU_SEG_NO_STR Differential Protection
EfmEl1PTOC1 PTOC_NO_SEG Earth Fault Element 1 - Stage 1

P645-MC-EN-2.3 7
MICS MiCOM P645

LD LN Instance LN Type Description

EfmEl1PTOC2 PTOC_NO_SEG Earth Fault Element 1 - Stage 2
EfmEl1PTOC3 PTOC_NO_SEG Earth Fault Element 1 - Stage 3
EfmEl1PTOC4 PTOC_NO_SEG Earth Fault Element 1 - Stage 4
EfmEl2PTOC1 PTOC_NO_SEG Earth Fault Element 2 - Stage 1
EfmEl2PTOC2 PTOC_NO_SEG Earth Fault Element 2 - Stage 2
EfmEl2PTOC3 PTOC_NO_SEG Earth Fault Element 2 - Stage 3
EfmEl2PTOC4 PTOC_NO_SEG Earth Fault Element 2 - Stage 4
EfmEl3PTOC1 PTOC_NO_SEG Earth Fault Element 3 - Stage 1
EfmEl3PTOC2 PTOC_NO_SEG Earth Fault Element 3 - Stage 2
EfmEl3PTOC3 PTOC_NO_SEG Earth Fault Element 3 - Stage 3
EfmEl3PTOC4 PTOC_NO_SEG Earth Fault Element 3 - Stage 4
FrqPTOF1 PTOF_NO_SEG F> 1 Overfrequency
FrqPTOF2 PTOF_NO_SEG F> 2 Overfrequency
FrqPTUF1 PTUF_NO_SEG F< 1 Underfrequency
FrqPTUF2 PTUF_NO_SEG F< 2 Underfrequency
FrqPTUF3 PTUF_NO_SEG F< 3 Underfrequency
FrqPTUF4 PTUF_NO_SEG F< 4 Underfrequency
HotPTTR1 PTTR_NO_SEG Hot Oil Thermal Overload stage 1
HotPTTR2 PTTR_NO_SEG Hot Oil Thermal Overload stage 2
HotPTTR3 PTTR_NO_SEG Hot Oil Thermal Overload stage 3
HzrAtrPTOC1 PTOC_NEU IREF>1 Auto Transformer High Impedance Restricted
HzrHvwPTOC1 PTOC_NEU IREF>1 HV Winding High Impedance Restricted
HzrLvwPTOC1 PTOC_NEU IREF>1 LV Winding High Impedance Restricted
HzrTvwPTOC1 PTOC_NEU IREF>1 TV Winding High Impedance Restricted
LLN0 LLN0_P643_P645 LLN0
LPHD1 LPHD_STANDARD Physical Device Information
LzrAtrPDIF1 PDIF_NEU IREF>1 Auto Transformer Low Impedance Restricted
LzrHvwPDIF1 PDIF_NEU IREF> 1 HV Winding Low Impedance Restricted Earth Fault
LzrLvwPDIF1 PDIF_NEU IREF> 1 LV Winding Low Impedance Restricted Earth Fault
LzrTvwPDIF1 PDIF_NEU IREF> 1 TV Winding Low Impedance Restricted Earth Fault
NgcEl1PTOC1 PTOC_NO_SEG I>1 Element 1 NPS Overcurrent
NgcEl1PTOC2 PTOC_NO_SEG I>2 Element 1 NPS Overcurrent
NgcEl1PTOC3 PTOC_NO_SEG I>3 Element 1 NPS Overcurrent
NgcEl1PTOC4 PTOC_NO_SEG I>4 Element 1 NPS Overcurrent
NgcEl2PTOC1 PTOC_NO_SEG I>1 Element 2 NPS Overcurrent
NgcEl2PTOC2 PTOC_NO_SEG I>2 Element 2 NPS Overcurrent
NgcEl2PTOC3 PTOC_NO_SEG I>3 Element 2 NPS Overcurrent
NgcEl2PTOC4 PTOC_NO_SEG I>4 Element 2 NPS Overcurrent
NgcEl3PTOC1 PTOC_NO_SEG I>1 Element 3 NPS Overcurrent
NgcEl3PTOC2 PTOC_NO_SEG I>2 Element 3 NPS Overcurrent
NgcEl3PTOC3 PTOC_NO_SEG I>3 Element 3 NPS Overcurrent
NgcEl3PTOC4 PTOC_NO_SEG I>4 Element 3 NPS Overcurrent
NgvPTOV1 PTOV_NO_SEG Negative Sequence Overvoltage
OcpEI1PTOC1 PTOC_SEG I>1 Element 1 Protection

8 P645-MC-EN-2.3
MiCOM P645 MICS

LD LN Instance LN Type Description

OcpEI1PTOC2 PTOC_SEG I>2 Element 1 Protection
OcpEI1PTOC3 PTOC_SEG I>3 Element 1 Protection
OcpEI1PTOC4 PTOC_SEG I>4 Element 1 Protection
OcpEI2PTOC1 PTOC_SEG I>1 Element 2 Protection
OcpEI2PTOC2 PTOC_SEG I>2 Element 2 Protection
OcpEI2PTOC3 PTOC_SEG I>3 Element 2 Protection
OcpEI2PTOC4 PTOC_SEG I>4 Element 2 Protection
OcpEI3PTOC1 PTOC_SEG I>1 Element 3 Protection
OcpEI3PTOC2 PTOC_SEG I>2 Element 3 Protection
OcpEI3PTOC3 PTOC_SEG I>3 Element 3 Protection
OcpEI3PTOC4 PTOC_SEG I>4 Element 3 Protection
OcpPVOC1 PVOC_SEG Voltage Controlled Overcurrent - Stage 1
OcpPVOC2 PVOC_SEG Voltage Controlled Overcurrent - Stage 2
Voltage Restrained Overcurrent - stage 1 (With Phase
OcpVROPVOC1 PVRO_SEG
segregation)
Voltage Restrained Overcurrent - stage 2 (With Phase
OcpVROPVOC2 PVRO_SEG
segregation)
PTRC1 PTRC_NO_SEG Trip Conditioning
RtdDerGGIO1 GGIO_IND_10 RTD Data Error indications
RtdOpcGGIO1 GGIO_IND_10 RTD Open Cct indications
RtdPTTR1 PTTR_NO_SEG RTD channel 1
RtdPTTR10 PTTR_NO_SEG RTD channel 10
RtdPTTR2 PTTR_NO_SEG RTD channel 2
RtdPTTR3 PTTR_NO_SEG RTD channel 3
RtdPTTR4 PTTR_NO_SEG RTD channel 4
RtdPTTR5 PTTR_NO_SEG RTD channel 5
RtdPTTR6 PTTR_NO_SEG RTD channel 6
RtdPTTR7 PTTR_NO_SEG RTD channel 7
RtdPTTR8 PTTR_NO_SEG RTD channel 8
RtdPTTR9 PTTR_NO_SEG RTD channel 9
RtdShcGGIO1 GGIO_IND_10 RTD Short Cct indications
TopPTTR1 PTTR_NO_SEG Top Oil Thermal Overload stage 1
TopPTTR2 PTTR_NO_SEG Top Oil Thermal Overload stage 2
TopPTTR3 PTTR_NO_SEG Top Oil Thermal Overload stage 3
VhzWg1PVPH1 PVPH_STANDARD Overfluxing - Winding 1
VhzWg1PVPH2 PVPH_STANDARD Overfluxing - Winding 1
VhzWg1PVPH3 PVPH_STANDARD Overfluxing - Winding 1
VhzWg1PVPH4 PVPH_STANDARD Overfluxing - Winding 1
VhzWg2PVPH1 PVPH_STANDARD Overfluxing - Winding 2
VhzWg2PVPH2 PVPH_STANDARD Overfluxing - Winding 2
VhzWg2PVPH3 PVPH_STANDARD Overfluxing - Winding 2
VhzWg2PVPH4 PVPH_STANDARD Overfluxing - Winding 2
VtpPhsPTOV1 PTOV_SEG Phase Overvoltage - stage 1
VtpPhsPTOV2 PTOV_SEG Phase Overvoltage - stage 2
VtpPhsPTUV1 PTUV_SEG Phase Undervoltage - stage 1

P645-MC-EN-2.3 9
MICS MiCOM P645

LD LN Instance LN Type Description

VtpPhsPTUV2 PTUV_SEG Phase Undervoltage - stage 2
VtpResPTOV1 PTOV_NO_SEG Residual Overvoltage - stage 1
VtpResPTOV2 PTOV_NO_SEG Residual Overvoltage - stage 2
XfrDifPDIF1 PDIF_NEU_SEG Xformer Differential
XfrDifPHAR1 PHAR_BASIC_SEG XFormer Harmonic Restraint - 2nd Harmonic
XfrDifPHAR2 PHAR_BASIC_SEG XFormer Harmonic Restraint - 5th Harmonic
Records
LLN0 LLN0_STANDARD Records Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
RDRE1 RDRE_BASIC Disturbance Recorder
System
AlmGGIO1 GGIO_ALM_96 Alarms
FnkGGIO1 GGIO_IND_10 Function Keys
GosGGIO1 GGIO_IND_64 GOOSE Input Signals
GosGGIO2 GGIO_IND_32 GOOSE Output Signals
LedGGIO1 GGIO_IND_18 Red LED Signals
LedGGIO2 GGIO_IND_18 Green LED Signals
LLN0 LLN0_SYSTEM System Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
OptGGIO1 GGIO_IND_40 Opto Inputs (40 off)
Uniqueness of control "Order Running" indications for control
OrdRunGGIO1 GGIO_IND_64_ORDRUN
operations
PloGGIO1 GGIO_IND_32_CTRL Controllable Inputs
RlyGGIO1 GGIO_IND_24 Output Contacts (24 off)
UsrAlmGGIO1 GGIO_USER_ALM_32 User Alarms

1.4 Logical Node definitions

The definition tables for each of the Logical Nodes in the top-level data model are presented in the
following sub-sections.
The following table presents a summary of the Logical Node templates used across the Logical
Devices within the overall IEC 61850 product data model:
LN Type (LN Description Name Space
GGIO_ANAL_10 (GGIO) Generic Process I/O (w.r.t. 10 Analogue Inputs) IEC 61850-7-4:2003
GGIO_ANAL_4 (GGIO) Generic Process I/O IEC 61850-7-4:2003
GGIO_IND_10 (GGIO) Generic Process I/O (w.r.t 10 Indication Elements) IEC 61850-7-4:2003
GGIO_IND_18 (GGIO) Generic Process I/O (w.r.t 18 Indication Elements) IEC 61850-7-4:2003
GGIO_IND_24 (GGIO) Generic Process I/O IEC 61850-7-4:2003
GGIO_IND_32 (GGIO) Generic Process I/O (w.r.t 32 Indication Elements) IEC 61850-7-4:2003
GGIO_IND_32_CTRL (GGIO) Generic Process I/O (w.r.t 32 Indications Ctrl I/P) IEC 61850-7-4:2003
GGIO_IND_4 (GGIO) Generic Process I/O IEC 61850-7-4:2003
GGIO_IND_40 (GGIO) Generic Process I/O IEC 61850-7-4:2003
GGIO_IND_64 (GGIO) Generic Process I/O (w.r.t 64 Indication Elements) IEC 61850-7-4:2003
GGIO_IND_64_ORDRUN (GGIO) Generic Process I/O (w.r.t 64 Uniqueness of control) IEC 61850-7-4:2003
GGIO_USER_ALM_32 (GGIO) Generic process I/O IEC 61850-7-4:2003

10 P645-MC-EN-2.3
MiCOM P645 MICS

LN Type (LN Description Name Space

GGIO_ALM_96 (GGIO) Generic Process I/O (w.r.t 96 Alarm Elements) IEC 61850-7-4:2003
LLN0_P643_P645 (LLN0) Logical Node 0 IEC 61850-7-4:2003
LLN0_STANDARD (LLN0) General Logical Node 0 IEC 61850-7-4:2003
LLN0_SYSTEM (LLN0) Logical Node 0 IEC 61850-7-4:2003
LPHD_STANDARD (LPHD) Px40 Physical Device Information IEC 61850-7-4:2003
MDIF_LZD (MDIF) Differential Measurements IEC 61850-7-4:2003
MDIF_XFR_1 (MDIF) Differential Measurements IEC 61850-7-4:2003
MDIF_XFR_2_3 (MDIF) Differential Measurements IEC 61850-7-4:2003
MLFR_FAULT_RECORD (MLFR) Measurements of Fault Record IEC 61850-7-4:2003
_1MLFR_FAULT_RECORD (MLFR) Measurements of Fault Record IEC 61850-7-4:2003
_2MMTR_EFL (MMTR) Metering IEC 61850-7-4:2003
MMTR_LOL (MMTR) Metering IEC 61850-7-4:2003
MMXU_LOL (MMXU) Loss-of-Life (Transformer) Measurements IEC 61850-7-4:2003
MMXU_FOURIER (MMXU) Fourier Standard Measurements IEC 61850-7-4:2003
MMXU_FOURIER_WINDI (MMXU) Fourier Winding Measurements IEC 61850-7-4:2003
NGMMXU_MSI (MMXU) Standard Measurements IEC 61850-7-4:2003
MMXU_POWER (MMXU) Power Measurements IEC 61850-7-4:2003
MMXU_RMS (MMXU) RMS Measurements IEC 61850-7-4:2003
MMXU_RMS_PHV (MMXU) RMS Voltage Measurements IEC 61850-7-4:2003
MMXU_SECOND_HARM (MMXU) Measurements (2nd Harmonic) IEC 61850-7-4:2003
ONICMMXU_THM (MMXU) Thermal Measurements IEC 61850-7-4:2003
MMXU_VHZ (MMXU) Volts per Herz Measurements IEC 61850-7-4:2003
MMXU_HZD (MMXU) Standard Measurements IEC 61850-7-4:2003
MSTA_DEMAND (MSTA) Metering Statistics IEC 61850-7-4:2003
PDIF_NEU (PDIF) Differential (w.r.t Neutral) IEC 61850-7-4:2003
PDIF_NEU_SEG (PDIF) Differential (w.r.t Phase Segregation) IEC 61850-7-4:2003
PDIF_NEU_SEG_NO_STR (PDIF) Differential IEC 61850-7-4:2003
PHAR_BASIC_SEG (PHAR) Harmonic Restraint (w.r.t Phase Segregation) IEC 61850-7-4:2003
PTOC_NO_SEG (PTOC) Timed Overcurrent (w.r.t No Phase Segregation) IEC 61850-7-4:2003
PTOC_SEG (PTOC) Timed Overcurrent (w.r.t Phase Segregation) IEC 61850-7-4:2003
PTOC_NEU (PTOC) Timed Overcurrent (w.r.t Neutral) IEC 61850-7-4:2003
PTOF_NO_SEG (PTOF) Overfrequency (w.r.t No Phase Segregation) IEC 61850-7-4:2003
PTOV_NO_SEG (PTOV) Overvoltage (w.r.t Phase Segregation) IEC 61850-7-4:2003
PTOV_SEG (PTOV) Overvoltage (w.r.t Phase Segregation) IEC 61850-7-4:2003
PTRC_NO_SEG (PTRC) Protection Trip conditioning (w.r.t No Phase Segregation) IEC 61850-7-4:2003
PTTR_NO_SEG (PTTR) Thermal overload (w.r.t No Phase Segregation) IEC 61850-7-4:2003
PTUC_NEU (PTUC) Models Timed Undercurrent Protection IEC 61850-7-2:2003
PTUF_NO_SEG (PTUF) Underfrequency (w.r.t No Phase Segregation) IEC 61850-7-4:2003
PTUV_SEG (PTUV) Undervoltage (w.r.t Phase Segregation) IEC 61850-7-4:2003
PVOC_SEG (PVOC) Voltage controlled time Overcurrent (w.r.t Phase Segregation) IEC 61850-7-4:2003
PVRO_SEG (PVOC) Voltage Restrained Time Overcurrent(w.r.t Phase Segregation) IEC 61850-7-4:2003
PVPH_STANDARD (PVPH) Volts per Hz Protection IEC 61850-7-4:2003
RBRF_STANDARD (RBRF) Breaker Failure IEC 61850-7-4:2003
RDRE_BASIC (RDRE) Disturbance Recorder function (w.r.t Mandatory Attributes only) IEC 61850-7-4:2003

P645-MC-EN-2.3 11
MICS MiCOM P645

1.4.1 Logical Node: GGIO_ALM_96

Description: Generic Process I/O (w.r.t 96 Alarm Elements)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Alm1 SPS_D General single alarm
Alm2 SPS_D General single alarm
Alm3 SPS_D General single alarm
Alm4 SPS_D General single alarm
Alm5 SPS_D General single alarm
Alm6 SPS_D General single alarm
Alm7 SPS_D General single alarm
Alm8 SPS_D General single alarm
Alm9 SPS_D General single alarm
Alm10 SPS_D General single alarm
Alm11 SPS_D General single alarm
Alm12 SPS_D General single alarm
Alm13 SPS_D General single alarm
Alm14 SPS_D General single alarm
Alm15 SPS_D General single alarm
Alm16 SPS_D General single alarm
Alm17 SPS_D General single alarm
Alm18 SPS_D General single alarm
Alm19 SPS_D General single alarm
Alm20 SPS_D General single alarm
Alm21 SPS_D General single alarm
Alm22 SPS_D General single alarm
Alm23 SPS_D General single alarm
Alm24 SPS_D General single alarm
Alm25 SPS_D General single alarm
Alm26 SPS_D General single alarm
Alm27 SPS_D General single alarm
Alm28 SPS_D General single alarm
Alm29 SPS_D General single alarm
Alm30 SPS_D General single alarm
Alm31 SPS_D General single alarm
Alm32 SPS_D General single alarm
Alm33 SPS_D General single alarm
Alm34 SPS_D General single alarm
Alm35 SPS_D General single alarm
Alm36 SPS_D General single alarm
Alm37 SPS_D General single alarm

12 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

Alm38 SPS_D General single alarm
Alm39 SPS_D General single alarm
Alm40 SPS_D General single alarm
Alm41 SPS_D General single alarm
Alm42 SPS_D General single alarm
Alm43 SPS_D General single alarm
Alm44 SPS_D General single alarm
Alm45 SPS_D General single alarm
Alm46 SPS_D General single alarm
Alm47 SPS_D General single alarm
Alm48 SPS_D General single alarm
Alm49 SPS_D General single alarm
Alm50 SPS_D General single alarm
Alm51 SPS_D General single alarm
Alm52 SPS_D General single alarm
Alm53 SPS_D General single alarm
Alm54 SPS_D General single alarm
Alm55 SPS_D General single alarm
Alm56 SPS_D General single alarm
Alm57 SPS_D General single alarm
Alm58 SPS_D General single alarm
Alm59 SPS_D General single alarm
Alm60 SPS_D General single alarm
Alm61 SPS_D General single alarm
Alm62 SPS_D General single alarm
Alm63 SPS_D General single alarm
Alm64 SPS_D General single alarm
Alm65 SPS_D General single alarm
Alm66 SPS_D General single alarm
Alm67 SPS_D General single alarm
Alm68 SPS_D General single alarm
Alm69 SPS_D General single alarm
Alm70 SPS_D General single alarm
Alm71 SPS_D General single alarm
Alm72 SPS_D General single alarm
Alm73 SPS_D General single alarm
Alm74 SPS_D General single alarm
Alm75 SPS_D General single alarm
Alm76 SPS_D General single alarm
Alm77 SPS_D General single alarm
Alm78 SPS_D General single alarm
Alm79 SPS_D General single alarm
Alm80 SPS_D General single alarm
Alm81 SPS_D General single alarm

P645-MC-EN-2.3 13
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Alm82 SPS_D General single alarm
Alm83 SPS_D General single alarm
Alm84 SPS_D General single alarm
Alm85 SPS_D General single alarm
Alm86 SPS_D General single alarm
Alm87 SPS_D General single alarm
Alm88 SPS_D General single alarm
Alm89 SPS_D General single alarm
Alm90 SPS_D General single alarm
Alm91 SPS_D General single alarm
Alm92 SPS_D General single alarm
Alm93 SPS_D General single alarm
Alm94 SPS_D General single alarm
Alm95 SPS_D General single alarm
Alm96 SPS_D General single alarm

1.4.2 Logical Node: GGIO_ANAL_10

Description: Generic Process I/O (w.r.t. 10 Analogue Inputs)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
AnIn1 MV_FLOAT_D Analogue input point 1
AnIn2 MV_FLOAT_D Analogue input point 2
AnIn3 MV_FLOAT_D Analogue input point 3
AnIn4 MV_FLOAT_D Analogue input point 4
AnIn5 MV_FLOAT_D Analogue input point 5
AnIn6 MV_FLOAT_D Analogue input point 6
AnIn7 MV_FLOAT_D Analogue input point 7
AnIn8 MV_FLOAT_D Analogue input point 8
AnIn9 MV_FLOAT_D Analogue input point 9
AnIn10 MV_FLOAT_D Analogue input point 10

1.4.3 Logical Node: GGIO_ANAL_4

Description: Generic Process I/O
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate

14 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

AnIn1 MV_FLOAT_D Analogue Input
AnIn2 MV_FLOAT_D Analogue Input
AnIn3 MV_FLOAT_D Analogue Input
AnIn4 MV_FLOAT_D Analogue Input

1.4.4 Logical Node: GGIO_IND_10

Description: Generic Process I/O (w.r.t 10 Indication Elements)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)

1.4.5 Logical Node: GGIO_IND_18

Description: Generic Process I/O (w.r.t 18 Indication Elements)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)

P645-MC-EN-2.3 15
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)

1.4.6 Logical Node: GGIO_IND_24

Description: Generic Process I/O
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN name Plate
Ind1 SPS_D General Indication
Ind2 SPS_D General Indication
Ind3 SPS_D General Indication
Ind4 SPS_D General Indication
Ind5 SPS_D General Indication
Ind6 SPS_D General Indication
Ind7 SPS_D General Indication
Ind8 SPS_D General Indication
Ind9 SPS_D General Indication
Ind10 SPS_D General Indication
Ind11 SPS_D General Indication
Ind12 SPS_D General Indication
Ind13 SPS_D General Indication
Ind14 SPS_D General Indication
Ind15 SPS_D General Indication
Ind16 SPS_D General Indication
Ind17 SPS_D General Indication
Ind18 SPS_D General Indication
Ind19 SPS_D General Indication
Ind20 SPS_D General Indication
Ind21 SPS_D General Indication
Ind22 SPS_D General Indication
Ind23 SPS_D General Indication
Ind24 SPS_D General Indication

16 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.7 Logical Node: GGIO_IND_32

Description: Generic Process I/O (w.r.t 32 Indication Elements)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)
Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)
Ind19 SPS_D General indication (binary input)
Ind20 SPS_D General indication (binary input)
Ind21 SPS_D General indication (binary input)
Ind22 SPS_D General indication (binary input)
Ind23 SPS_D General indication (binary input)
Ind24 SPS_D General indication (binary input)
Ind25 SPS_D General indication (binary input)
Ind26 SPS_D General indication (binary input)
Ind27 SPS_D General indication (binary input)
Ind28 SPS_D General indication (binary input)
Ind29 SPS_D General indication (binary input)
Ind30 SPS_D General indication (binary input)
Ind31 SPS_D General indication (binary input)
Ind32 SPS_D General indication (binary input)

P645-MC-EN-2.3 17
MICS MiCOM P645

1.4.8 Logical Node: GGIO_IND_32_CTRL

Description: Generic Process I/O (w.r.t 32 Indications Ctrl I/P)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
SPCSO1 SPC_CONTROL Single point controllable status output
SPCSO2 SPC_CONTROL Single point controllable status output
SPCSO3 SPC_CONTROL Single point controllable status output
SPCSO4 SPC_CONTROL Single point controllable status output
SPCSO5 SPC_CONTROL Single point controllable status output
SPCSO6 SPC_CONTROL Single point controllable status output
SPCSO7 SPC_CONTROL Single point controllable status output
SPCSO8 SPC_CONTROL Single point controllable status output
SPCSO9 SPC_CONTROL Single point controllable status output
SPCSO10 SPC_CONTROL Single point controllable status output
SPCSO11 SPC_CONTROL Single point controllable status output
SPCSO12 SPC_CONTROL Single point controllable status output
SPCSO13 SPC_CONTROL Single point controllable status output
SPCSO14 SPC_CONTROL Single point controllable status output
SPCSO15 SPC_CONTROL Single point controllable status output
SPCSO16 SPC_CONTROL Single point controllable status output
SPCSO17 SPC_CONTROL Single point controllable status output
SPCSO18 SPC_CONTROL Single point controllable status output
SPCSO19 SPC_CONTROL Single point controllable status output
SPCSO20 SPC_CONTROL Single point controllable status output
SPCSO21 SPC_CONTROL Single point controllable status output
SPCSO22 SPC_CONTROL Single point controllable status output
SPCSO23 SPC_CONTROL Single point controllable status output
SPCSO24 SPC_CONTROL Single point controllable status output
SPCSO25 SPC_CONTROL Single point controllable status output
SPCSO26 SPC_CONTROL Single point controllable status output
SPCSO27 SPC_CONTROL Single point controllable status output
SPCSO28 SPC_CONTROL Single point controllable status output
SPCSO29 SPC_CONTROL Single point controllable status output
SPCSO30 SPC_CONTROL Single point controllable status output
SPCSO31 SPC_CONTROL Single point controllable status output
SPCSO32 SPC_CONTROL Single point controllable status output

18 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.9 Logical Node: GGIO_IND_4

Description: Generic Process I/O
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)

1.1.1 Logical Node: GGIO_IND_40

Description: Generic Process I/O
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General Indication
Ind2 SPS_D General Indication
Ind3 SPS_D General Indication
Ind4 SPS_D General Indication
Ind5 SPS_D General Indication
Ind6 SPS_D General Indication
Ind7 SPS_D General Indication
Ind8 SPS_D General Indication
Ind9 SPS_D General Indication
Ind10 SPS_D General Indication
Ind11 SPS_D General Indication
Ind12 SPS_D General Indication
Ind13 SPS_D General Indication
Ind14 SPS_D General Indication
Ind15 SPS_D General Indication
Ind16 SPS_D General Indication
Ind17 SPS_D General Indication
Ind18 SPS_D General Indication
Ind19 SPS_D General Indication
Ind20 SPS_D General Indication
Ind21 SPS_D General Indication
Ind22 SPS_D General Indication
Ind23 SPS_D General Indication

P645-MC-EN-2.3 19
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Ind24 SPS_D General Indication
Ind25 SPS_D General Indication
Ind26 SPS_D General Indication
Ind27 SPS_D General Indication
Ind28 SPS_D General Indication
Ind29 SPS_D General Indication
Ind30 SPS_D General Indication
Ind31 SPS_D General Indication
Ind32 SPS_D General Indication
Ind33 SPS_D General Indication
Ind34 SPS_D General Indication
Ind35 SPS_D General Indication
Ind36 SPS_D General Indication
Ind37 SPS_D General Indication
Ind38 SPS_D General Indication
Ind39 SPS_D General Indication
Ind40 SPS_D General Indication

1.4.10 Logical Node: GGIO_IND_64

Description: Generic Process I/O (w.r.t 64 Indication Elements)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)
Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)

20 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

Ind19 SPS_D General indication (binary input)
Ind20 SPS_D General indication (binary input)
Ind21 SPS_D General indication (binary input)
Ind22 SPS_D General indication (binary input)
Ind23 SPS_D General indication (binary input)
Ind24 SPS_D General indication (binary input)
Ind25 SPS_D General indication (binary input)
Ind26 SPS_D General indication (binary input)
Ind27 SPS_D General indication (binary input)
Ind28 SPS_D General indication (binary input)
Ind29 SPS_D General indication (binary input)
Ind30 SPS_D General indication (binary input)
Ind31 SPS_D General indication (binary input)
Ind32 SPS_D General indication (binary input)
Ind33 SPS_D General indication (binary input)
Ind34 SPS_D General indication (binary input)
Ind35 SPS_D General indication (binary input)
Ind36 SPS_D General indication (binary input)
Ind37 SPS_D General indication (binary input)
Ind38 SPS_D General indication (binary input)
Ind39 SPS_D General indication (binary input)
Ind40 SPS_D General indication (binary input)
Ind41 SPS_D General indication (binary input)
Ind42 SPS_D General indication (binary input)
Ind43 SPS_D General indication (binary input)
Ind44 SPS_D General indication (binary input)
Ind45 SPS_D General indication (binary input)
Ind46 SPS_D General indication (binary input)
Ind47 SPS_D General indication (binary input)
Ind48 SPS_D General indication (binary input)
Ind49 SPS_D General indication (binary input)
Ind50 SPS_D General indication (binary input)
Ind51 SPS_D General indication (binary input)
Ind52 SPS_D General indication (binary input)
Ind53 SPS_D General indication (binary input)
Ind54 SPS_D General indication (binary input)
Ind55 SPS_D General indication (binary input)
Ind56 SPS_D General indication (binary input)
Ind57 SPS_D General indication (binary input)
Ind58 SPS_D General indication (binary input)
Ind59 SPS_D General indication (binary input)
Ind60 SPS_D General indication (binary input)
Ind61 SPS_D General indication (binary input)
Ind62 SPS_D General indication (binary input)

P645-MC-EN-2.3 21
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Ind63 SPS_D General indication (binary input)
Ind64 SPS_D General indication (binary input)

1.4.11 Logical Node: GGIO_IND_64_ORDRUN

Description: Generic Process I/O (w.r.t 64 Uniqueness of control)
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)
Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)
Ind19 SPS_D General indication (binary input)
Ind20 SPS_D General indication (binary input)
Ind21 SPS_D General indication (binary input)
Ind22 SPS_D General indication (binary input)
Ind23 SPS_D General indication (binary input)
Ind24 SPS_D General indication (binary input)
Ind25 SPS_D General indication (binary input)
Ind26 SPS_D General indication (binary input)
Ind27 SPS_D General indication (binary input)
Ind28 SPS_D General indication (binary input)
Ind29 SPS_D General indication (binary input)
Ind30 SPS_D General indication (binary input)
Ind31 SPS_D General indication (binary input)
Ind32 SPS_D General indication (binary input)
Ind33 SPS_D General indication (binary input)

22 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

Ind34 SPS_D General indication (binary input)
Ind35 SPS_D General indication (binary input)
Ind36 SPS_D General indication (binary input)
Ind37 SPS_D General indication (binary input)
Ind38 SPS_D General indication (binary input)
Ind39 SPS_D General indication (binary input)
Ind40 SPS_D General indication (binary input)
Ind41 SPS_D General indication (binary input)
Ind42 SPS_D General indication (binary input)
Ind43 SPS_D General indication (binary input)
Ind44 SPS_D General indication (binary input)
Ind45 SPS_D General indication (binary input)
Ind46 SPS_D General indication (binary input)
Ind47 SPS_D General indication (binary input)
Ind48 SPS_D General indication (binary input)
Ind49 SPS_D General indication (binary input)
Ind50 SPS_D General indication (binary input)
Ind51 SPS_D General indication (binary input)
Ind52 SPS_D General indication (binary input)
Ind53 SPS_D General indication (binary input)
Ind54 SPS_D General indication (binary input)
Ind55 SPS_D General indication (binary input)
Ind56 SPS_D General indication (binary input)
Ind57 SPS_D General indication (binary input)
Ind58 SPS_D General indication (binary input)
Ind59 SPS_D General indication (binary input)
Ind60 SPS_D General indication (binary input)
Ind61 SPS_D General indication (binary input)
Ind62 SPS_D General indication (binary input)
Ind63 SPS_D General indication (binary input)
Ind64 SPS_D General indication (binary input)

1.4.12 Logical Node: GGIO_USER_ALM_32

Description: Generic process I/O
LN Class: GGIO
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Alm1 SPS_D User Alarm 1
Alm2 SPS_D User Alarm 2
Alm3 SPS_D User Alarm 3
Alm4 SPS_D User Alarm 4

P645-MC-EN-2.3 23
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Alm5 SPS_D User Alarm 5
Alm6 SPS_D User Alarm 6
Alm7 SPS_D User Alarm 7
Alm8 SPS_D User Alarm 8
Alm9 SPS_D User Alarm 9
Alm10 SPS_D User Alarm 10
Alm11 SPS_D User Alarm 11
Alm12 SPS_D User Alarm 12
Alm13 SPS_D User Alarm 13
Alm14 SPS_D User Alarm 14
Alm15 SPS_D User Alarm 15
Alm16 SPS_D User Alarm 16
Alm17 SPS_D User Alarm 17
Alm18 SPS_D User Alarm 18
Alm19 SPS_D User Alarm 19
Alm20 SPS_D User Alarm 20
Alm21 SPS_D User Alarm 21
Alm22 SPS_D User Alarm 22
Alm23 SPS_D User Alarm 23
Alm24 SPS_D User Alarm 24
Alm25 SPS_D User Alarm 25
Alm26 SPS_D User Alarm 26
Alm27 SPS_D User Alarm 27
Alm28 SPS_D User Alarm 28
Alm29 SPS_D User Alarm 29
Alm30 SPS_D User Alarm 30
Alm31 SPS_D User Alarm 31
Alm32 SPS_D User Alarm 32

1.4.13 Logical Node: LLN0_P643_P645

Description: Logical Node 0
LN Class: LLN0
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate
VhzMod INC_MOD_D_PRIV Volts/Hz Mode
VhzBeh INS_BEH_D_PRIV Volts per Hz Behaviour
RefMod INC_MOD_D_PRIV REF Mode
RefBeh INS_BEH_D_PRIV REF Behaviour
FrqMod INC_MOD_D_PRIV Overfrequency/Underfrequency Mode
FrqBeh INS_BEH_D_PRIV Overfrequency/Underfrequency Behaviour
ThmMod INC_MOD_D_PRIV Thermal Overload Mode

24 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

ThmBeh INS_BEH_D_PRIV Thermal Overload Behaviour
CbfMod INC_MOD_D_PRIV CB Fail Mode
CbfBeh INS_BEH_D_PRIV Circuit Breaker Fail Behaviour
EfmMod INC_MOD_D_PRIV Earth Fault 1 (Measured) Mode
EfmBeh INS_BEH_D_PRIV Earth Fault 1 (Measured) Behaviour
OcpMod INC_MOD_D_PRIV Overcurrent Mode
OcpBeh INS_BEH_D_PRIV Overcurrent Behaviour
DifMod INC_MOD_D_PRIV Differential Mode
DifBeh INS_BEH_D_PRIV Differential Behaviour
NpsMod INC_MOD_D_PRIV NPS Overcurrent Mode
NpsBeh INS_BEH_D_PRIV NPS Overcurrent Behaviour
RtdMod INC_MOD_D_PRIV RTD Mode
RtdBeh INS_BEH_D_PRIV RTD Behaviour
NvdMod INC_MOD_D_PRIV NVD Overvoltage Mode
NvdBeh INS_BEH_D_PRIV NVD Overvoltage Behaviour
VtpMod INC_MOD_D_PRIV Voltage Protection Mode
VtpBeh INS_BEH_D_PRIV Voltage Protection Behaviour
CliMod INC_MOD_D_PRIV Clio Inputs Protection Mode
CliBeh INS_BEH_D_PRIV Clio Inputs Behaviour

1.4.14 Logical Node: LLN0_STANDARD

Description: General Logical Node 0
LN Class: LLN0
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate

1.4.15 Logical Node: LLN0_SYSTEM

Description: Logical Node 0
LN Class: LLN0
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate
LEDRs SPC_CONTROL LED reset T
OrdRun SPS_WD_NS Order Running(IEC 61850 phase 2.0 and 2.1) X
SyncSt SPS_WD_NS Time Synchronisation Indication (IEC 61850 phase 2.0 and 2.1) X

P645-MC-EN-2.3 25
MICS MiCOM P645

1.4.16 Logical Node: LPHD_STANDARD

Description: Px40 Physical Device Information
LN Class: LPHD
Attribute Attr. Type Explanation T X
PhyNam DPL_STANDARD Physical device name plate
PhyHealth INS_HEALTH Physical device health
Proxy SPS_D Indicates if this LN is a proxy
PwrUp SPS_D Power up detected

1.4.17 Logical Node: MDIF_LZD

Description: Differential Measurements
LN Class: MDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
IDiff MV_FLOAT_NS IREF low impedance Diff X
IBias MV_FLOAT_NS IREF low impedance Bias X

1.4.18 Logical Node: MDIF_XFR_1

Description: Differential Measurements
LN Class: MDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
IDiff WYE_SEG_NS Current Diff - 3 phase X
IBias WYE_SEG_NS Current Bias - 3 phase X

1.4.19 Logical Node: MDIF_XFR_2_3

Description: Differential Measurements
LN Class: MDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
IDiff WYE_SEG_NS Harmonic Differential X

26 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.20 Logical Node: MLFR_FAULT_RECORD_1

Description: Measurements of Fault Record
LN Class: MLFR
Attribute Attr. Type Explanation T X
Mod INC_MOD_PRIV Mode
Beh INS_BEH_PRIV Behaviour
Health INS_HEALTH_PRIV Health
NamPlt LPL_LN_P_NS Name Plate
Hz MV_FLOAT_D_NS Fault system frequency X
FltDur MV_FLOAT_D_NS Fault duration time X
CBOpTim MV_FLOAT_D_NS CB operate time X
RlyTrTim MV_FLOAT_D_NS Relay trip time X
ADifFlt WYE_SEG_D_NS Fault differential current X
ABiasFlt WYE_SEG_D_NS Fault bias current X
ARefHVDiFlt MV_FLOAT_D_NS REF HV Fault differential current X
ARefHVBiaFlt MV_FLOAT_D_NS REF HV Fault bias current X
ARefLVDifFlt MV_FLOAT_D_NS REF LV Fault differential current X
ARefLVBiaFlt MV_FLOAT_D_NS REF LV Fault bias current X
ARefTVDifFlt MV_FLOAT_D_NS REF TV Fault differential current X
ARefTVBiaFlt MV_FLOAT_D_NS REF TV Fault bias current X
AHVFlt WYE_SEG_RES_D_NS HV Fault current X
ALVFlt WYE_SEG_RES_D_NS LV Fault current X
ATVFlt WYE_SEG_RES_D_NS TV Fault current X
PhVFlt WYE_SEG_D_NS Fault voltage X

1.4.21 Logical Node: MLFR_FAULT_RECORD_2

Description: Measurements of Fault Record
LN Class: MLFR
Attribute Attr. Type Explanation T X
Mod INC_MOD_PRIV Mode
Beh INS_BEH_PRIV Behaviour
Health INS_HEALTH_PRIV Health
NamPlt LPL_LN_P_NS Name Plate
A1Flt WYE_SEG_D_NS CT1 Fault Current X
A2Flt WYE_SEG_D_NS CT2 Fault Current X
A3Flt WYE_SEG_D_NS CT3 Fault Current X
A4Flt WYE_SEG_D_NS CT4 Fault Current X
A5Flt WYE_SEG_D_NS CT5 Fault Current X
APeakFlt WYE_SEG_D_NS Fault Peak Current X
A2HVFlt MV_FLOAT_D_NS Fault HV terminal negative sequence current X
A2LVFlt MV_FLOAT_D_NS Fault LV terminal negative sequence current X
A2TVFlt MV_FLOAT_D_NS Fault TV terminal negative sequence current X
SeqVFlt SEQ_MAG_D_NS Fault sequence voltage X

P645-MC-EN-2.3 27
MICS MiCOM P645

Attribute Attr. Type Explanation T X

PPVFlt DEL_SEG_D_NS Fault Phase to Phase voltage X
PxVFlt MV_FLOAT_D_NS Fault Winding 2 flux voltage X
A2tFlt WYE_SEG_D_NS Fault A2t X

1.4.22 Logical Node: MMTR_EFL

Description: Metering
LN Class: MMTR
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
SupWh BCR_MMTR Real energy supply (Energy flow towards bus bar)
SupVArh BCR_MMTR Reactive energy supply (Energy flow towards bus bar)
DmdWh BCR_MMTR Real energy demand (Energy flow from bus bar)
DmdVArh BCR_MMTR Reactive energy demand (Energy flow from bus bar)
MMTRs SPC_CTRL_PRIV Reset thermal state X

1.4.23 Logical Node: MMTR_LOL

Description: Metering
LN Class: MMTR
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
FAALres MV_FLOAT_NS Loss of Life FAA LRes X
LOLLres MV_FLOAT_NS Loss of Life LRes X
LOLSts MV_FLOAT_NS Loss of Life Status X
LOLRate MV_FLOAT_NS Loss of Life Rate X

1.4.24 Logical Node: MMXU_FOURIER

Description: Fourier Standard Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
V0 MV_FLOAT_NS V0 Magnitude
Hz MV_FLOAT_D Frequency
V1 MV_FLOAT_NS V1 Magnitude
V2 MV_FLOAT_NS V2 Magnitude

28 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

PPV DEL_SEG_ANG Phase to Phase voltages
PhV WYE_SEG_ANG Phase to Ground voltages
Vx WYE_RES_ANG_D_NS Vx
VNd WYE_RES_ANG_D_NS VNd

1.4.25 Logical Node: MMXU_FOURIER_WINDING

Description: Fourier Winding Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
A WYE_SEG_ANG Phase currents
IN WYE_RES_ANG_D_NS IN measured
INd WYE_RES_ANG_D_NS IN derived

1.4.26 Logical Node: MMXU_HZD

Description: Standard Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
IN WYE_RES_ANG_D_NS IN measured

1.4.27 Logical Node: MMXU_LOL

Description: Loss-of-Life (Transformer) Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
FAA MV_FLOAT_NS Loss of Life FAA
LOL MV_FLOAT_NS Loss of Life Aging Factor

P645-MC-EN-2.3 29
MICS MiCOM P645

1.4.28 Logical Node: MMXU_MSI

Description: Standard Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
A WYE_SEG_ANG Phase currents
I0 MV_FLOAT_NS I0 Magnitude
I1 MV_FLOAT_NS I1 Magnitude
I2 MV_FLOAT_NS I2 Magnitude

1.4.29 Logical Node: MMXU_POWER

Description: Power Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
TotW MV_FLOAT Total active power (Total P)
TotVAr MV_FLOAT Total reactive power (Total Q)
TotVA MV_FLOAT Total apparent power (Total S)
TotPF MV_FLOAT Average power factor (Total PF)
W WYE_SEG Phase active power (P)
VAr WYE_SEG Phase reactive power (Q)
VA WYE_SEG Phase apparent power (S)
PF WYE_SEG Phase power factor

1.4.30 Logical Node: MMXU_RMS

Description: RMS Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
A WYE_SEG Phase currents

30 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.31 Logical Node: MMXU_RMS_PHV

Description: RMS Voltage Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
PhV WYE_SEG Phase to Ground voltages

1.4.32 Logical Node: MMXU_SECOND_HARMONIC

Description: Measurements (2nd Harmonic)
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
A WYE_SEG Phase 2nd Harmonic currents
IN WYE_RES_MAG_NS IN 2nd Harmonic measured
INd WYE_RES_MAG_NS IN 2nd Harmonic derived

1.4.33 Logical Node: MMXU_THM

Description: Thermal Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
HotT MV_FLOAT_NS Hot Spot Temperature
TopT MV_FLOAT_NS Top Oil Temperature
AmbT MV_FLOAT_NS Ambient Temperature
TopPreLft MV_FLOAT_NS Top Oil Pretrip Left

1.4.34 Logical Node: MMXU_VHZ

Description: Volts per Herz Measurements
LN Class: MMXU
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate

P645-MC-EN-2.3 31
MICS MiCOM P645

Attribute Attr. Type Explanation T X

VHz MV_FLOAT_NS Volts/Hz X
VHzt MV_FLOAT_NS Volts/Hz t Pretrip X
VHzThrm MV_FLOAT_NS Volts/Hz Thermal X

1.4.35 Logical Node: MSTA_DEMAND

Description: Metering Statistics
LN Class: MSTA
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
MaxW MV_FLOAT Maximum real power
MaxVAr MV_FLOAT Maximum reactive power

1.4.36 Logical Node: PDIF_NEU

Description: Differential (w.r.t Neutral)
LN Class: PDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.37 Logical Node: PDIF_NEU_SEG

Description: Differential (w.r.t Phase Segregation)
LN Class: PDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T

32 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.38 Logical Node: PDIF_NEU_SEG_NO_STR

Description: Differential
LN Class: PDIF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Op ACT_SEG Operate T

1.4.39 Logical Node: PHAR_BASIC_SEG

Description: Harmonic Restraint (w.r.t Phase Segregation)
LN Class: PHAR
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start

1.4.40 Logical Node: PTOC_NEU

Description: Timed Overcurrent (w.r.t Neutral)
LN Class: PTOC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.41 Logical Node: PTOC_NO_SEG

Description: Timed Overcurrent (w.r.t No Phase Segregation)
LN Class: PTOC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

P645-MC-EN-2.3 33
MICS MiCOM P645

1.4.42 Logical Node: PTOC_SEG

Description: Timed Overcurrent (w.r.t Phase Segregation)
LN Class: PTOC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T

1.4.43 Logical Node: PTOF_NO_SEG

Description: Overfrequency (w.r.t No Phase Segregation)
LN Class: PTOF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.44 Logical Node: PTOV_NO_SEG

Description: Overvoltage (w.r.t Phase Segregation)
LN Class: PTOV
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.45 Logical Node: PTOV_SEG

Description: Overvoltage (w.r.t Phase Segregation)
LN Class: PTOV
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T

34 P645-MC-EN-2.3
MiCOM P645 MICS

1.4.46 Logical Node: PTRC_NO_SEG

Description: Protection Trip conditioning (w.r.t No Phase Segregation)
LN Class: PTRC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Tr ACT_NO_SEG Trip
Str ACD_NO_SEG Sum of all starts of all connected Logical Nodes

1.4.47 Logical Node: PTTR_NO_SEG

Description: Thermal overload (w.r.t No Phase Segregation)
LN Class: PTTR
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Op ACT_NO_SEG Operate T
MTRRs SPC_CTRL_PRIV Reset thermal state X

1.4.48 Logical Node: PTUC_NEU

Description: Models Timed Undercurrent Protection
LN Class: PTUC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Started
Op ACT_NO_SEG Operate T
ModOvA SPS_WD_NS Overcurrent Mode Indication

1.4.49 Logical Node: PTUF_NO_SEG

Description: Underfrequency (w.r.t No Phase Segregation)
LN Class: PTUF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate

P645-MC-EN-2.3 35
MICS MiCOM P645

Attribute Attr. Type Explanation T X

Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.50 Logical Node: PTUV_SEG

Description: Undervoltage (w.r.t Phase Segregation)
LN Class: PTUV
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T

1.4.51 Logical Node: PVOC_SEG

Description: Voltage controlled time Overcurrent (w.r.t Phase Segregation)
LN Class: PVOC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T

1.4.52 Logical Node: PVPH_STANDARD

Description: Volts per Hz Protection
LN Class: PVPH
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T

1.4.53 Logical Node: PVRO_SEG

Description: Voltage Restrained Time Overcurrent(w.r.t Phase Segregation)
LN Class: PVOC
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour

36 P645-MC-EN-2.3
MiCOM P645 MICS

Attribute Attr. Type Explanation T X

Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate

1.4.54 Logical Node: RBRF_STANDARD

Description: Breaker Failure
LN Class: RBRF
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
OpEx ACT_NO_SEG Breaker failure trip ("External trip") T
OpIn ACT_NO_SEG Operate, retrip ("Internal trip") T

1.4.55 Logical Node: RDRE_BASIC

Description: Disturbance Recorder function (w.r.t Mandatory Attributes only)
LN Class: RDRE
Attribute Attr. Type Explanation T X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
RcdMade SPS_WD Recording made
FltNum INS_BASIC Fault number

1.5 Common Data Class definitions

The definition tables for each of the Common Data Classes used in the Logical Node definitions are
presented in the following sub-sections.
From an application point-of-view the data attributes of a Common Data Class are classified according
to their specific use. The characterization of data attributes, and the services that they
support/provide, will be through the use of 'Functional Constraints'. The Functional Constraints are
specified by the table below:
FC Name Semantic Source Definition
BR Buffered reports IEC 61850-7-2
CF Configuration IEC 61850-7-2
CO Control IEC 61850-7-2
DC Description IEC 61850-7-2
EX Extended Definition IEC 61850-7-2
GO GOOSE Control IEC 61850-7-2
GS GSSE Control (UCA2 GOOSE) IEC 61850-7-2
LG Logging IEC 61850-7-2
MS Multicast sampled value control IEC 61850-7-2

P645-MC-EN-2.3 37
MICS MiCOM P645

FC Name Semantic Source Definition

MX Measurands (Analogue values) IEC 61850-7-2
RP Unbuffered reports IEC 61850-7-2
SE Setting Group Editable IEC 61850-7-2
SG Setting Group IEC 61850-7-2
SP Set Point IEC 61850-7-2
ST Status Information IEC 61850-7-2
SV Substitution Values IEC 61850-7-2
US Unicast sampled value control IEC 61850-7-2
XX Data attribute service parameters IEC 61850-7-2

1.5.1 Common Data Class: ACD_NO_SEG

Description: Directional Protection Activation Information (w.r.t No Phase Segregation)
CDC Class: ACD
Attribute Type FC Enumeration Comment X
general BOOLEAN ST Trip or start has happened
ENUMERATED8
dirGeneral ST dir General direction (unknown, forward, backward or both)
(MMS Type: INT8)
q Quality ST Quality of the protection activation information
Timestamp of the last change in state of protection activation
t TimeStamp ST
information

1.5.2 Common Data Class: ACD_SEG

Description: Directional Protection Activation Information (w.r.t Phase Segregation)
CDC Class: ACD
Attribute Type FC Enumeration Comment X
general BOOLEAN ST Trip or start has happened
ENUMERATED8
dirGeneral ST dir General direction (unknown, forward, backward or both)
(MMS Type: INT8)
phsA BOOLEAN ST Trip or start event of Phase A has happened
ENUMERATED8
dirPhsA ST dir Phase A direction (unknown, forward or backward)
(MMS Type: INT8)
phsB BOOLEAN ST Trip or start event of Phase B has happened
ENUMERATED8
dirPhsB ST dir Phase B direction (unknown, forward or backward)
(MMS Type: INT8)
phsC BOOLEAN ST Trip or start event of Phase C has happened
ENUMERATED8
dirPhsC ST dir Phase C direction (unknown, forward or backward)
(MMS Type: INT8)
q Quality ST Quality of the protection activation information
Timestamp of the last change in state of protection activation
t TimeStamp ST
information

38 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.3 Common Data Class: ACT_NO_SEG

Description: Protection Activation Information (w.r.t No Phase Segregation)
CDC Class: ACT
Attribute Type FC Enumeration Comment X
general BOOLEAN ST Trip or start has happened
q Quality ST Quality of the protection activation information
t TimeStamp ST Timestamp of the last change in state of protection activation information

1.5.4 Common Data Class: ACT_SEG

Description: Protection Activation Information (w.r.t Phase Segregation)
CDC Class: ACT
Attribute Type FC Enumeration Comment X
general BOOLEAN ST Trip or start has happened
phsA BOOLEAN ST Trip or start event of Phase A has happened
phsB BOOLEAN ST Trip or start event of Phase B has happened
phsC BOOLEAN ST Trip or start event of Phase C has happened
q Quality ST Quality of the protection activation information
t TimeStamp ST Timestamp of the last change in state of protection activation information

1.5.5 Common Data Class: BCR_MMTR

Description: Binary Counter Reading
CDC Class: BCR
Attribute Type FC Enumeration Comment X
actVal INT32 ST Binary counter status represented as an integer
q Quality ST Quality of counter value
t TimeStamp ST Time of last counter change
pulsQty FLOAT32 CF Magnitude of the counted value 'per count' (value = actVal x pulsQty)

1.5.6 Common Data Class: CMV_MAG_ANG_FLOAT

Description: Complex Measured value (w.r.t Floating Point Magnitude and Angle)
CDC Class: CMV
Attribute Type FC Enumeration Comment X
Deadbanded complex measured vector. Updated to the current
cVal Vector_MagnitudeAngle_Float MX value of instCVal when the value has changed according to the
configuration parameter db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit_Multiplier CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes

P645-MC-EN-2.3 39
MICS MiCOM P645

1.5.7 Common Data Class: CMV_MAG_FLOAT

Description: Complex Measured value (w.r.t Floating Point Magnitude)
CDC Class: CMV
Attribute Type FC Enumeration Comment X
Deadbanded complex measured vector. Updated to the current value
cVal Vector_Magnitude_Float MX of instCVal when the value has changed according to the
configuration parameter db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit_Multiplier CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes

1.5.8 Common Data Class: DEL_SEG_ANG

Description: Phase to phase measurements for a 3-Phase system (w.r.t Phase Segregation +
Angle)
CDC Class: DEL
Attribute Type FC Enumeration Comment X
phsAB CMV_MAG_ANG_FLOAT -- Measurement values for Phase A to Phase B
phsBC CMV_MAG_ANG_FLOAT -- Measurement values for Phase B to Phase C
phsCA CMV_MAG_ANG_FLOAT -- Measurement values for Phase C to Phase A

1.5.9 Common Data Class: DEL_SEG_D_NS

Description: Phase to phase measurements for a 3-Phase system
CDC Class: DEL
Attribute Type FC Enumeration Comment X
phsAB CMV_MAG_FLOAT -- Measurement values for Phase A to Phase B
phsBC CMV_MAG_FLOAT -- Measurement values for Phase B to Phase C
phsCA CMV_MAG_FLOAT -- Measurement values for Phase C to Phase A
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.10 Common Data Class: DPL_STANDARD

Description: Standard Device Name Plate
CDC Class: DPL
Attribute Type FC Enumeration Comment X
vendor VISIBLE_STRING255 D Name of the vendor
ChwRev VISIBLE_STRING255 D Hardware revision
CswRev VISIBLE_STRING255 D Software revision
CserNum VISIBLE_STRING255 D Serial Number
Cmodel VISIBLE_STRING255 D Model Number
Clocation VISIBLE_STRING255 D Physical location of device

40 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.11 Common Data Class: INC_MOD

Description: Controllable Integer Status (w.r.t Mode)
CDC Class: INC
Attribute Type FC Enumeration Comment X
INT32
stVal ST Mod Status value of the data
(MMS Type: INT8)
q Quality ST Quality of the status value
t TimeStamp ST Timestamp of the last change in state of status value
ENUMERATED8
ctlModel CF ctlModel Control model (Corresponding to the behaviour of the data)
(MMS Type: INT8)

1.5.12 Common Data Class: INC_MOD_D_PRIV

Description: Controllable Integer Status (with NameSpace and description)
CDC Class: INC
Attribute Type FC Enumeration Comment X
ctlVal INT32 C Control value
Oorigin Originator ST Originator of the last change of the controllable data
ENUMERATED8
stVal ST Mod Status value of the data
(MMS Type: INT8)
q Quality ST Quality of the status value
t TimeStamp ST Timestamp of the last change in state of status value
ENUMERATED8
ctlModel CF ctlModel Control model (Corresponding to the behaviour of the data)
(MMS Type: INT8)
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.13 Common Data Class: INC_MOD_PRIV

Description: Controllable Integer Status (w.r.t Mode (Private DO))
CDC Class: INC
Attribute Type FC Enumeration Comment X
INT32
stVal ST Mod Status value of the data
(MMS Type: INT8)
q Quality ST Quality of the status value
t TimeStamp ST Timestamp of the last change in state of status value
ENUMERATED8
ctlModel CF ctlModel Control model (Corresponding to the behaviour of the data)
(MMS Type: INT8)
dataNs VISIBLE_STRING255 EX Data name space

1.5.14 Common Data Class: INS_BASIC

Description: Integer Status (w.r.t Mandatory Options only)
CDC Class: INS
Attribute Type FC Enumeration Comment X
stVal INT32 ST The element status
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state

P645-MC-EN-2.3 41
MICS MiCOM P645

1.5.15 Common Data Class: INS_BEH

Description: Integer Status (w.r.t Behaviour)
CDC Class: INS
Attribute Type FC Enumeration Comment X
INT32
stVal ST Beh The element status
(MMS Type: INT8)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state

1.5.16 Common Data Class: INS_BEH_D_PRIV

Description: Integer Status (w.r.t Behaviour, with Description (Private DO))
CDC Class: INS
Attribute Type FC Enumeration Comment X
INT32
stVal ST Beh The element status
(MMS Type: INT8)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.17 Common Data Class: INS_BEH_PRIV

Description: Integer Status (w.r.t Behaviour (Private DO))
CDC Class: INS
Attribute Type FC Enumeration Comment X
INT32
stVal ST Beh The element status
(MMS Type: INT8)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state
dataNs VISIBLE_STRING255 EX Data name space

1.5.18 Common Data Class: INS_HEALTH

Description: Integer Status (w.r.t Health)
CDC Class: INS
Attribute Type FC Enumeration Comment X
INT32
stVal ST Health The element status
(MMS Type: INT8)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state

42 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.19 Common Data Class: INS_HEALTH_PRIV

Description: Integer Status(dataNs used in extentended LN)
CDC Class: INS
Attribute Type FC Enumeration Comment X
INT32
stVal ST Health The element status
(MMS Type: INT8)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state
dataNs VISIBLE_STRING255 EX Data name space

1.5.20 Common Data Class: LPL_LLN0

Description: Logical Node 0 Name Plate
CDC Class: LPL
Attribute Type FC Enumeration Comment X
vendor VISIBLE_STRING255 D Name of the vendor
CswRev VISIBLE_STRING255 D Software revision
Cd VISIBLE_STRING255 D Description
CconfigRev VISIBLE_STRING255 D Uniquely identifies the configuration of a local device instance
CldNs VISIBLE_STRING255 EX Logical Device name space

1.5.21 Common Data Class: LPL_LN

Description: Standard Logical Node Name Plate
CDC Class: LPL
Attribute Type FC Enumeration Comment X
vendor VISIBLE_STRING255 D Name of the vendor
CswRev VISIBLE_STRING255 D Software revision
Cd VISIBLE_STRING255 D Description

1.5.22 Common Data Class: LPL_LN_P_NS

Description: Logical Node name plate(w.r.t Alstom Extended)
CDC Class: LPL
Attribute Type FC Enumeration Comment X
vendor VISIBLE_STRING255 D Name of the vendor
CswRev VISIBLE_STRING255 D Software revision
Cd VISIBLE_STRING255 D Description
ClnNs VISIBLE_STRING255 EX Logical Node name space
dataNs VISIBLE_STRING255 EX Data name space

P645-MC-EN-2.3 43
MICS MiCOM P645

1.5.23 Common Data Class: MV_FLOAT

Description: Measured value (w.r.t. Floating Point value)
CDC Class: MV
Attribute Type FC Enumeration Comment X
Deadbanded magnitude of the instantaneous value of a measured
value or harmonic value. Updated to the current value of instMag
mag AnalogueValue_Float MX
when the value has changed according to the configuration parameter
db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit_Multiplier CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes

1.5.24 Common Data Class: MV_FLOAT_D

Description: Measured value (w.r.t Floating Point Value with Description)
CDC Class: MV
Attribute Type FC Enumeration Comment X
Deadbanded magnitude of the instantaneous value of a measured
value or harmonic value. Updated to the current value of instMag
mag AnalogueValue_Float MX
when the value has changed according to the configuration parameter
db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit_Multiplier CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes
d VISIBLE_STRING255 D Description of the status element

1.5.25 Common Data Class: MV_FLOAT_D_NS

Description: Measured value
CDC Class: MV
Attribute Type FC Enumeration Comment X
Deadbanded magnitude of the instantaneous value of a measured
value or harmonic value. Updated to the current value of instMag
mag AnalogueValue_Float MX
when the value has changed according to the configuration parameter
db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

44 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.26 Common Data Class: MV_FLOAT_NS

Description: MV_FLOAT with dataNs for extra Dos
CDC Class: MV
Attribute Type FC Enumeration Comment X
Deadbanded magnitude of the instantaneous value of a measured
value or harmonic value. Updated to the current value of instMag
mag AnalogueValue_Float MX
when the value has changed according to the configuration parameter
db.
q Quality MX Quality of the measurement value
Time deadbanded magnitude last exceeded its db configuration
t TimeStamp MX
parameter
units Unit_Multiplier CF Unit of the attribute representing the data
db INT32U CF Measurement deadband
rangeC RangeConfig_Deadband CF Measurement range configuration attributes
dataNs VISIBLE_STRING255 EX Data name space

1.5.27 Common Data Class: SEQ_MAG_D_NS

Description: Sequence components of a measurement value
CDC Class: SEQ
Attribute Type FC Enumeration Comment X
c1 CMV_MAG_FLOAT -- Sequence component 1 (For semantic meaning see seqT)
c2 CMV_MAG_FLOAT -- Sequence component 2 (For semantic meaning see seqT)
c3 CMV_MAG_FLOAT -- Sequence component 3 (For semantic meaning see seqT)
ENUMERATED8 Sequence quantity measurement type (Pos-Neg-Zero or Dir-
seqT MX seqT
(MMS Type: INT8) Quad-Zero)
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.28 Common Data Class: SPC_CONTROL

Description: Controllable Single Point
CDC Class: SPC
Attribute Type FC Enumeration Comment X
ctlVal BOOLEAN C Control value (Off - FALSE, On - TRUE)
Oorigin Originator ST Originator of the last change of the controllable data
stVal BOOLEAN ST Status value of the data
q Quality ST Quality of the status value
t TimeStamp ST Timestamp of the last change in state of status value
ENUMERATED8
ctlModel CF ctlModel Control model (Corresponding to the behaviour of the data)
(MMS Type: INT8)
sboTimeout INT32U CF Select Before Operate timeout period (in milliseconds)

P645-MC-EN-2.3 45
MICS MiCOM P645

1.5.29 Common Data Class: SPC_CTRL_PRIV

Description: Controllable Single Point
CDC Class: SPC
Attribute Type FC Enumeration Comment X
ctlVal BOOLEAN C Control value (Off - FALSE, On - TRUE)
Oorigin Originator ST Originator of the last change of the controllable data
stVal BOOLEAN ST Status value of the data
q Quality ST Quality of the status value
ENUMERATED8
ctlModel CF ctlModel Control model (Corresponding to the behaviour of the data)
(MMS Type: INT8)
t TimeStamp ST Timestamp of the last change in state of status value
sboTimeout INT32U CF Select Before Operate timeout period (in milliseconds)
dataNs VISIBLE_STRING255 EX Data name space

1.5.30 Common Data Class: SPS_D

Description: Standard Single Point Status (with Description)
CDC Class: SPS
Attribute Type FC Enumeration Comment X
stVal BOOLEAN ST The element status (TRUE or FALSE)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state
d VISIBLE_STRING255 D Description of the status element

1.5.31 Common Data Class: SPS_WD

Description: Single Point Status (without Description)
CDC Class: SPS
Attribute Type FC Enumeration Comment X
stVal BOOLEAN ST The element status (TRUE or FALSE)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state

1.5.32 Common Data Class: SPS_WD_NS

Description: Single Point Status (without Description, with namespace)
CDC Class: SPS
Attribute Type FC Enumeration Comment X
stVal BOOLEAN ST The element status (TRUE or FALSE)
q Quality ST The quality of the status value
t TimeStamp ST Timestamp of the last change in state
dataNs VISIBLE_STRING255 EX Data name space

46 P645-MC-EN-2.3
MiCOM P645 MICS

1.5.33 Common Data Class: WYE_RES_ANG_D_NS

Description: Phase to ground measurements for a 3-Phase system (w.r.t Residual +
Description + Angle)
CDC Class: WYE
Attribute Type FC Enumeration Comment X
res CMV_MAG_ANG_FLOAT -- Measurement values for the residual system current
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.34 Common Data Class: WYE_RES_MAG_NS

Description: Phase to ground measurements for a 1-Phase system, magnitude only
CDC Class: WYE
Attribute Type FC Enumeration Comment X
res CMV_MAG_FLOAT -- Measurement values for the residual system current
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.5.35 Common Data Class: WYE_SEG

Description: Phase to ground measurements for a 3-Phase system (w.r.t Phase Segregation)
CDC Class: WYE
Attribute Type FC Enumeration Comment X
phsA CMV_MAG_FLOAT -- Measurement values for Phase A
phsB CMV_MAG_FLOAT -- Measurement values for Phase B
phsC CMV_MAG_FLOAT -- Measurement values for Phase C

1.5.36 Common Data Class: WYE_SEG_ANG

Description: Phase to ground measurements for a 3-Phase system
CDC Class: WYE
Attribute Type FC Enumeration Comment X
phsA CMV_MAG_ANG_FLOAT -- Measurement values for Phase A
phsB CMV_MAG_ANG_FLOAT -- Measurement values for Phase B
phsC CMV_MAG_ANG_FLOAT -- Measurement values for Phase C

1.5.37 Common Data Class: WYE_SEG_D_NS

Description: Phase to ground measurements for a 3-Phase system
CDC Class: WYE
Attribute Type FC Enumeration Comment X
phsA CMV_MAG_FLOAT -- Measurement values for Phase A
phsB CMV_MAG_FLOAT -- Measurement values for Phase B
phsC CMV_MAG_FLOAT -- Measurement values for Phase C
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

P645-MC-EN-2.3 47
MICS MiCOM P645

1.5.38 Common Data Class: WYE_SEG_NS

Description: WYE_SEG with dataNs DO
CDC Class: WYE
Attribute Type FC Enumeration Comment X
phsA CMV_MAG_FLOAT -- Measurement values for Phase A
phsB CMV_MAG_FLOAT -- Measurement values for Phase B
phsC CMV_MAG_FLOAT -- Measurement values for Phase C
dataNs VISIBLE_STRING255 EX Data name space

1.5.39 Common Data Class: WYE_SEG_RES_D_NS

Description: Phase to ground measurements for a 3-Phase system
CDC Class: WYE
Attribute Type FC Enumeration Comment X
phsA CMV_MAG_FLOAT -- Measurement values for Phase A
phsB CMV_MAG_FLOAT -- Measurement values for Phase B
phsC CMV_MAG_FLOAT -- Measurement values for Phase C
neut CMV_MAG_FLOAT -- Measurement values for neutral input
d VISIBLE_STRING255 D Description of the status element
CdataNs VISIBLE_STRING255 EX Data name space

1.6 Common data attribute type definitions

Common data attribute types, known herein as components, are defined for use in the Common Data
Classes defined in the sections above.

1.6.1 Component: AnalogueValue_Float

Comment: General analogue value (w.r.t Floating Point value)
Parent Type: AnalogueValue
Attribute Type Enumeration Comment X
f FLOAT32 Floating point value

1.6.2 Component: Originator

Comment: Originator of the last change of data attribute representing the value of a controllable data
object
Parent Type:
Attribute Type Enumeration Comment X
ENUMERATED8 Originator category (Not-supported, bay-control, station-control, remote-control,
orCat orCategory
(MMS Type: INT8) automatic-bay, automatic-station, automatic-remote, maintenance or process)
orIdent OCTET_STRING64 Originator identification (Null value indicates unknown or not reported)

48 P645-MC-EN-2.3
MiCOM P645 MICS

1.6.3 Component: RangeConfig_Deadband

Comment: Measurement range configuration
Parent Type: RangeConfig
Attribute Type Enumeration Comment X
Minimum process measurement for which values of i and f are considered
min AnalogueValue_Float
within limits
hhLim AnalogueValue_Float High High range limit
hLim AnalogueValue_Float High range limit
lLim AnalogueValue_Float Low range limit
Maximum process measurement for which values of i and f are considered
max AnalogueValue_Float
within limits
llLim AnalogueValue_Float Low Low range limit

1.6.4 Component: Unit

Comment: SI Unit definitions
Parent Type:
Attribute Type Enumeration Comment X
ENUMERATED16
multiplier multiplier Multiplier value, the default of which is 0 (i.e. multiplier = 1)
(MMS Type: INT8)
ENUMERATED16
SIUnit SIUnit SI Unit
(MMS Type: INT8)

1.6.5 Component: Unit_Multiplier

Comment: SI Unit definitions
Parent Type: Unit
Attribute Type Enumeration Comment X
ENUMERATED16
multiplier multiplier Multiplier value, the default of which is 0 (i.e. multiplier = 1)
(MMS Type: INT8)
ENUMERATED16
SIUnit SIUnit SI Unit
(MMS Type: INT8)

1.6.6 Component: Vector_Magnitude_Float

Comment: Complex vector (w.r.t Floating Point Magnitude value)
Parent Type: Vector
Attribute Type Enumeration Comment X
mag AnalogueValue_Float The magnitude of the complex value

1.6.7 Component: Vector_MagnitudeAngle_Float

Comment: Complex vector (w.r.t Floating Point Magnitude and Angle values)
Parent Type: Vector
Attribute Type Enumeration Comment X
mag AnalogueValue_Float The magnitude of the complex value
ang AnalogueValue_Float The angle of the complex value (the unit is degrees)

P645-MC-EN-2.3 49
MICS MiCOM P645

1.7 Enumerated type definitions

The following sub-sections specify the enumerations that are associated to some Common Data Class
attributes. The definition of the enumerations are according to IEC 61850-7-3 and IEC 61850-7-4
unless otherwise stated.

1.7.1 Enumerated type: AddCause

Description: IEC 61850 phase 2.0 and 2.1
Ordinal Semantic
0 Unknown
1 Not-supported
2 Blocked-by-switching-hierarchy
3 Select-failed
4 Invalid-position
5 Position-reached
6 Parameter-change-in-execution
7 Step-limit
8 Blocked-by-Mode
9 Blocked-by-process
10 Blocked-by-interlocking
11 Blocked-by-synchrocheck
12 Command-already-in-execution
13 Blocked-by-health
14 1-of-n-control
15 Abortion-by-cancel
16 Time-limit-over
17 Abortion-by-trip
18 Object-not-selected

1.7.2 Enumerated type: Beh

Description: Behaviour
Ordinal Semantic
1 on
2 blocked
3 test
4 test/blocked
5 off

1.7.3 Enumerated type: ctlModel

Description: Control Model
Ordinal Semantic
0 status-only
1 direct-with-normal-security
2 sbo-with-normal-security
3 direct-with-enhanced-security
4 sbo-with-enhanced-security

50 P645-MC-EN-2.3
MiCOM P645 MICS

1.7.4 Enumerated type: dir

Description: Direction
Ordinal Semantic
0 unknown
1 forward
2 backward
3 both

1.7.5 Enumerated type: Health

Description: Health
Ordinal Semantic
1 Ok
2 Warning
3 Alarm

1.7.6 Enumerated type: Mod

Description: Mode
Ordinal Semantic
1 on
2 blocked
3 test
4 test/blocked
5 off

1.7.7 Enumerated type: multiplier

Description: Exponents of the multiplier value in base 10.
Ordinal Semantic
-24 y
-21 z
-18 a
-15 f
-12 p
-9 n
-6 µ
-3 m
-2 c
-1 d
0
1 da
2 h
3 k
6 M
9 G
12 T

P645-MC-EN-2.3 51
MICS MiCOM P645

Ordinal Semantic
15 P
18 E
21 Z
24 Y

1.7.8 Enumerated type: orCategory

Description: IEC 61850 phase 2.0 and 2.1
Ordinal Semantic
0 not-supported
1 bay-control
2 station-control
3 remote-control
4 automatic-bay
5 automatic-station
6 automatic-remote
7 maintenance
8 process

1.7.9 Enumerated type: seqT

Description: Sequence Measurement Type
Ordinal Semantic
0 pos-neg-zero
1 dir-quad-zero

1.7.10 Enumerated type: SIUnit

Description: SI Units derived from ISO/IEC 1000
Ordinal Semantic
-16 years
-15 months
-14 weeks
-13 V/s
-12 mins
-11 hours
-10 days
-9 °F
-8 ratio
-7 miles
-6 inches
-5 feet
-4 df/dt
-3 Hz/s
-2 %
-1 pu

52 P645-MC-EN-2.3
MiCOM P645 MICS

Ordinal Semantic
1
2 m
3 kg
4 s
5 A
6 K
7 mol
8 cd
9 deg
10 rad
11 sr
21 Gy
22 q
23 °C
24 Sv
25 F
26 C
27 S
28 H
29 V
30 ohm
31 J
32 N
33 Hz
34 lx
35 Lm
36 Wb
37 T
38 W
39 Pa
41 m²
42 m³
43 m/s
44 m/s²
45 m³/s
46 m/m³
47 M
48 kg/m³
49 m²/s
50 W/m K
51 J/K
52 ppm
53 1/s
54 rad/s

P645-MC-EN-2.3 53
MICS MiCOM P645

Ordinal Semantic
61 VA
62 Watts
63 VAr
64 phi
65 cos(phi)
66 Vs
67 V²
68 As
69 A²
70 A²t
71 VAh
72 Wh
73 VArh
74 V/Hz

1.8 MMS data-type conversions

The following table shows the relationships between the Part 7 and Part 8-1 data types. The
definitions presented above use Part 7 data types, however these are subject to 'translation' when
exposed over an MMS (Part 8-1) interface:
Part 7 Type MMS Type Part 7 Description
BOOLEAN Bool Logical TRUE/FALSE value
BSTR16 Bstring16 Bit string 16
BVstring13 BVstring13 Variable bit string (upto 13 bits)
Check BVstring2 Control Object check flags
CODED_ENUM Byte Coded enumeration
CODED_ENUM2 Byte Coded enumeration (2)
EntryTime Btime6 8.1 Section 8.1.3.7
ENUMERATED16 Short 16 bit enumerated value
ENUMERATED8 Byte 8 bit enumerated value
FLOAT32 Float 32 bit floating point value
FLOAT64 Double 64 bit floating point value
INT128 Int64 128 bit signed integer value
INT16 Short 16 bit signed integer value
INT16U Ushort 16 bit unsigned integer value
INT24U Ulong 24 bit unsigned integer value
INT32 Long 32 bit signed integer value
INT32U Ulong 32 bit unsigned integer value
INT8 Byte 8 bit signed integer value
INT8U Ubyte 8 bit unsigned integer value
OCTET_STRING6 Ostring6 6 character string (8 bits per character)
OCTET_STRING64 OVstring64 64 character string (8 bits per character)
OCTET_STRING8 OVstring8 8 character string (8 bits per character)
Quality BVstring13 IEC 61850 Quality
TimeStamp Utctime IEC 61850 Time stamp

54 P645-MC-EN-2.3
MiCOM P645 MICS

Part 7 Type MMS Type Part 7 Description

UNICODE_STRING255 UTF8Vstring255 255 character string (16 bits per unicode character)
UTC_TM Utctime UTC Timestamp
VISIBLE_STRING255 Vstring255 255 character string
VISIBLE_STRING64 Vstring64 64 character string
VISIBLE_STRING65 Vstring65 65 character string
VISIBLE_STRING97 Vstring97 97 character string

P645-MC-EN-2.3 55
Imagination at work

Grid Solutions
St Leonards Building
Redhill Business Park
Stafford, ST16 1WT, UK
+44 (0) 1785 250 070
www.gegridsolutions.com/contact

© 2018 General Electric. All rights reserved. Information contained in this document is indicative only.
No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project.
This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice.
Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.

P645-MC-EN-2.3