Scribd
Upload
2 views

DSP Impaortant Questions

The document covers various topics related to filter design, including the derivation of transfer functions for Butterworth filters, realization of IIR filters, and the frequency response of FIR filters. It also discusses the Gibbs phenomenon, distinctions between FIR and IIR filters, and the design of high pass FIR filters using Hamming windows. Additionally, it addresses memory mapped addressing modes and VLIW architecture in programmable DSPs, along with on-chip peripherals and memory access schemes in DSP processors.

Uploaded by

memesmachamemes143
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2 views

DSP Impaortant Questions

The document covers various topics related to filter design, including the derivation of transfer functions for Butterworth filters, realization of IIR filters, and the frequency response of FIR filters. It also discusses the Gibbs phenomenon, distinctions between FIR and IIR filters, and the design of high pass FIR filters using Hamming windows. Additionally, it addresses memory mapped addressing modes and VLIW architecture in programmable DSPs, along with on-chip peripherals and memory access schemes in DSP processors.

Uploaded by

memesmachamemes143
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

UNIT-III

1a) Obtain the 4th order transfer function of normalized Butterworth low pass filter.

2. a) Find 𝐻(𝑧), for a 3rd order Butterworth digital filter using impulse invariant transformation
method. Assume 𝑇 = 1 sec.

𝐻 ( )=1/1 + 2𝑧−1 − 𝑧−2


3a) Obtain the cascade and parallel form realization of IIR filter with system function

a) Obtain the bilinear transformation formula for designing IIR digital filter?
UNIT-IV

1.a) Determine the frequency response of FIR filter with 𝑁 is odd and symmetric impulse
response.
b) Explain the concept of Gibbs phenomenon in FIR filters.2.a) Distinguish between FIR and
IIR filters.

2,Sketch the direct form realization of linear phase FIR filter with

ℎ (𝑛) = {1, 2, 3, 4, 3, 2, 1}

3.a) Design a high pass FIR filter using Hamming window with a cutoff frequency of 1.2 rad and
N=9
b) Obtain the ideal impulse response of a high pass FIR filter

UNIT-V

1a) Explain the memory mapped addressing modes and bit reversed addressing modes in
programmable DSP’s.
2.b) Draw the block diagram of VLIW architecture and explain.

b) Explain the special addressing modes in programmable DSPs.

3.a) Discuss about on-chip peripherals of TMS320C5X DSP processor

b) Explain in brief memory access schemes in DSP processors

You might also like