ENGLISH

SIMPLE MANUAL

Wireless
Rear Speakers
Kit

Please read this manual carefully before operating your set

and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
LG Customer Information Center

1-800-243-0000 USA, Consumer MODEL

1-888-865-3026 USA, Commercial
SPK8-S
Register your product Online!
www.lg.com
www.lg.com
Copyright © 2018-2019 LG Electronics Inc. All Rights Reserved.
Printed in China
FCC Compliance Statement
Additional Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide Specification of Wireless receiver
reasonable protection against harmful interference in a Power Refer to the main label on the
wireless receiver.
1 Rear Speakers Connection Surround Sound On/Off
residential installation. This equipment generates, uses, requirement
and can radiate radio frequency energy and, if not installed Power Refer to the main label on the When you turn on surround function, you can enjoy
and used in accordance with the instructions, may cause consumption wireless receiver. Speaker design and connection method may be magnificent surround sound for all the input sound
harmful interference to radio communications. However, different according to models. source with rear speakers.
there is no guarantee that interference will not occur in a Approx.
particular installation. If this equipment does cause harmful 60.0 mm x 220.0 mm x
Dimensions The initial setting for the surround function is
interference to radio or television reception, which can be 175.0 mm
(W x H x D) (2.4 inch x 8.7 inch x OFF, turn the surround function ON to use it.
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or 6.9 inch)
Transparent
more of the following measures: Design and specifications are subject to change SK5Y
Black stripe
without notice. Surround On: Press and hold REAR o button on the
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and the About Ferrite Core (Optional) Rear speaker remote control about 2 seconds.
(Left)
receiver. Surround Off: Press and hold REAR p button on the
twice
yy Connect the equipment to an outlet on a circuit remote control about 2 seconds.
different from that to which the receiver is connected.
SK10Y/SK9Y/SK8Y/SK6Y
yy Consult the dealer or an experienced radio/TV Wireless Rear speaker
technician for help. Receiver (Right) Surround On: Press and hold AUTO VOL button on the
This device complies with part 15 of the FCC Rules. remote control about 2 seconds and then press AUTO
Operation is subject to the following two conditions: Black stripe VOL button repeateadly to select ON - SURROUND in
Transparent the display window.
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, Surround Off: Press and hold AUTO VOL button on the
a Connect the speaker cables to rear speakers remote control about 2 seconds and then press AUTO
including interference that may cause undesired operation. correctly.
Any changes or modifications in construction of this device VOL button repeateadly to select OFF - SURROUND in
b Connect the Wireless Receiver and the rear the display window.
which are not expressly approved by the party responsible
speakers (Grey: right, Blue: left) with the speakers
for compliance could void the user’s authority to operate
cables. SL4Y/SL5Y/SL5YF/SL6Y/SL6YF/SL7Y/SL7YF/SL8Y/
the equipment.
c Turn on the Surround function to enjoy surround SL8YG/SL9Y/SL9YG/SL10Y/SL10YG
FCC RF Radiation Exposure Statement : This equipment sound. Surround On: Press and hold button on the remote
complies with FCC radiation exposure limits set forth for
control about 3 seconds and then press button
an uncontrolled environment. This transmitter must not
repeateadly to select ON - SURROUND in the display
be co-located or operating in conjunction with any other 2 Wireless Receiver Connection window.
antenna or transmitter.
Surround Off: Press and hold button on the remote
This equipment should be installed and operated with a Connect the power cord of the wireless receiver control about 3 seconds and then press button
minimum distance 20 cm (7.8 inches) between the to the AC outlet. repeateadly to select OFF - SURROUND in the display
antenna and your body. Users must follow the specific b Turn on the unit: The unit and wireless receiver window.
operating instructions for satisfying RF exposure will be automatically connected. The receiver's
compliance. yellow - green LED turns on
FCC Radio Frequency Interference Requirements :
Wireless Receiver Connection Manually
High power radars are allocated as primary users of the
If the rear speakers do not make sound, try to
5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
connect manually.
radar stations can cause interference with and/or damage
this device. This device cannot be co-located with any other a Press PAIRING button on the rear of the
transmitter. wireless receiver.
Supplier's Declaration of Conformity yy The yellow - green LED on the wireless receiver
blinks quickly.
Trade Name LG
b Turn on the main unit.
Responsible Party LG Electronics USA, Inc.
c Pairing is completed.
Address 1000 Sylvan Ave Englewood
Cliffs, NJ 07632 yy The yellow - green LED on the wireless receiver
turns on.
Telephone (201)266-2215