DATASHEET

AK5850HS

AK5850HS
Ex-approved Headset
Rugged headset for Ex and Industrial environments

Noise-cancelling microphone

High quality digital background noise reduction

HD-voice compatible

High quality audio

Optional in-ear monitors may be connected for added damping in extreme

environments

Standard 4-pole Nexus connector for easy connection/replacement

For use with Ex-approved and industrial plugboxwith PTT

Low smoke and halogen free cable

Designed for Turbine Ex explosion-proof and industrial intercoms

IP54 ICX-AlphaCom Exigo

Description

The AK5850HS is a high quality industrial Ex-approved headset for use in rugged conditions. It offers an adjustable boom microphone and a short curly
cable for flexible connectivity through a 4-pole Nexus plug. This headset is designed for use with the Vingtor Stentofon Turbine Ex and Industrial
Intercoms and are HD Voice compatible when used with these stations.

Used with the TAX-2B/TA-22B Cable and Plugbox with PTT, it offers an exceptional range of over 10 meters. The pluggable nature of the headset allows
for easy maintenance/replacement as well as allowing operators to use their personal headset as a hearing protection aid, and disconnecting once the
conversation is over.

Technical Dimensions

page 1/5

www.zenitel.com [email protected]
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is
certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with
Zenitel. Any authorized reproduction, in part or in whole, must include this legend; Zenitel – All rights reserved.
 page 2/5

www.zenitel.com [email protected]
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is
certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with
Zenitel. Any authorized reproduction, in part or in whole, must include this legend; Zenitel – All rights reserved.
 Specifications

MECHANICAL

Weight 400 g

ENVIRONMENTAL

Operational Temperature -40°C to +60°C

Ingress Protection (IP) IP-54 (when worn)

ELECTRICAL

Impedance 230 ohm

Sensitivity (mic) 4 mV / 220 ohm

ACOUSTICAL

Frequency Response 90-7000 Hz

Noise Reduction -12dB @ 1kHz

SOUND ATTENUATION

Above 1kHz: -35 to -40 dB

500-1000 Hz -27.5 to -35 dB

125-500 Hz -15 to -27.5 dB

31 dB (with in-ear monitor: 39

H84
dB)

26 dB (with in-ear monitor: 37

M84
dB)

20 dB (with in-ear monitor: 33

L84
dB)

29 dB (with in-ear monitor: 40

SNR84
dB)

NRR 21 dB

CERTIFICATIONS

EN 60079-0: 2012 + A11: 2013 &

CENELEC safety standards
EN 60079-11: 2012

IEC 60079-0: 2011, IEC 60079-

IEC safety standards
11: 2011

II 2G Ex ib IIC T4 Gb, -40°C ≤ Ta

Marking
≤ +60°C

ATEX certificate Nemko 03ATEX1351

IECEx certificate IECEx PRE 15.0063

Accessories

page 3/5

www.zenitel.com [email protected]
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is
certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with
Zenitel. Any authorized reproduction, in part or in whole, must include this legend; Zenitel – All rights reserved.
 Spare Boom Microphone for
Headset
TAX-2B TA-22B Spare Boom Microphone for all A-
Kabel type Headsets
Ex-Approved Plugbox & Cable Industrial Plugbox & Cable for
for Headset with PTT Headset with PTT

Used With

TFIX-1-V2 TFIX-2-V2 TFIX-3-V2 TFIX-4

Ex IP Intercom Station- full keypad Ex IP Intercom Station with 6 buttons Ex IP Intercom Station with 3 buttons Ex IP Telephone

TFIE-1 TFIE-2 EAPII-1 EAPII-6

IP and SIP Intercom IP and SIP Intercom Exigo Industrial Access Panel, 1 Exigo Industrial Access Panel, 6
Button Buttons

page 4/5

www.zenitel.com [email protected]
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is
certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with
Zenitel. Any authorized reproduction, in part or in whole, must include this legend; Zenitel – All rights reserved.
 TFIE-6

IP and SIP Intercom

page 5/5

www.zenitel.com [email protected]
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is
certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with
Zenitel. Any authorized reproduction, in part or in whole, must include this legend; Zenitel – All rights reserved.