Scribd
Upload
5 views

Dio revised

The document is a job report for STAAD.Pro V8i, detailing the input file, job information, joint coordinates, member incidences, element properties, and load definitions for a structural analysis project. It includes specifications for materials, member properties, and loading conditions. The report indicates that no mass or gravity reference load types are present, and it notes the formation of a mass model for seismic analysis.

Uploaded by

designers.starlight
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

Dio revised

The document is a job report for STAAD.Pro V8i, detailing the input file, job information, joint coordinates, member incidences, element properties, and load definitions for a structural analysis project. It includes specifications for materials, member properties, and loading conditions. The report indicates that no mass or gravity reference load types are present, and it notes the formation of a mass model for seismic analysis.

Uploaded by

designers.starlight
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 78

****************************************************

* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.90 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 21, 2025 *
* Time= 10:54:31 *
* *
* USER ID: PNP *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\USER\Downloads\DIO Revised2.STD
2. START JOB INFORMATION
3. ENGINEER DATE 14-NOV-24
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 2 4.55044 0 0.1; 3 9.09988 0 0.1; 5 4.55044 2 0.1; 6 9.09988 2 0.1
9. 8 4.55044 5 0.1; 9 9.09988 5 0.1; 11 4.55044 8 0.1; 12 9.09988 8 0.1
10. 14 4.55044 11 0.1; 15 9.09988 11 0.1; 17 4.55044 0 4.60249
11. 18 9.09988 0 4.60249; 20 4.55044 2 4.60249; 21 9.09988 2 4.60249
12. 23 4.55044 5 4.60249; 24 9.09988 5 4.60249; 26 4.55044 8 4.60249
13. 27 9.09988 8 4.60249; 29 4.55044 11 4.60249; 30 9.09988 11 4.60249
14. 32 4.55044 14 0.1; 33 9.09988 14 0.1; 35 4.55044 14 4.60249
15. 36 9.09988 14 4.60249; 37 0 5 0.1; 38 0 8 0.1; 39 0 11 0.1; 40 0 5 4.60249
16. 41 0 8 4.60249; 42 0 11 4.60249; 46 0 5 2.7; 47 0 8 2.7; 48 0 11 2.7
17. 49 4.55044 5 5.20249; 50 9.09988 5 5.20249; 51 4.55044 8 5.20249
18. 52 9.09988 8 5.20249; 53 4.55044 11 5.20249; 54 9.09988 11 5.20249
19. 58 0 5 5.20249; 59 0 8 5.20249; 60 0 11 5.20249; 61 9.9499 5 0.1
20. 62 9.9499 8 0.1; 63 9.9499 11 0.1; 64 9.9499 5 4.60249; 65 9.9499 8 4.60249
21. 66 9.9499 11 4.60249; 67 9.9499 5 5.20249; 68 9.9499 8 5.20249
22. 69 9.9499 11 5.20249; 70 0 0 4.60249; 71 0 2 4.60249; 72 0 14 4.60249
23. 73 0 0 0.1; 74 0 2 0.1; 75 0 14 0.1; 76 9.9499 14 0.1; 77 9.9499 14 4.60249
24. 79 -0.00355995 14 4.60249; 80 1.5 5 0.1; 81 1.5 8 0.1; 82 1.5 11 0.1
25. 83 1.5 5 4.60249; 84 1.5 8 4.60249; 85 1.5 11 4.60249; 86 1.5 5 2.7
26. 87 1.5 8 2.7; 88 1.5 11 2.7; 89 1.5 14 4.60249; 90 1.5 14 0.1; 91 0 11 3.65125
27. 92 1.5 11 3.65125
28. MEMBER INCIDENCES
29. 2 5 6; 4 8 9; 6 11 12; 8 14 15; 10 2 5; 11 3 6; 13 5 8; 14 6 9; 15 37 38
30. 16 8 11; 17 9 12; 18 38 39; 19 11 14; 20 12 15; 22 20 21; 24 23 24; 26 26 27
31. 28 29 30; 30 17 20; 31 18 21; 33 20 23; 34 21 24; 35 40 41; 36 23 26; 37 24 27
32. 38 41 42; 39 26 29; 40 27 30; 42 5 20; 43 6 21; 44 37 46; 45 8 23; 46 9 24
33. 47 38 47; 48 11 26; 49 12 27; 50 39 48; 51 14 29; 52 15 30; 53 39 75; 54 14 32
34. 55 15 33; 56 42 72; 57 29 35; 58 30 36; 60 32 33; 61 72 79; 62 35 36; 65 33 36
35. 66 37 80; 67 38 81; 68 39 82; 69 40 83; 70 41 84; 71 42 85; 75 46 40; 76 47 41
36. 77 48 91; 84 23 49; 85 24 50; 86 26 51; 87 27 52; 88 29 53; 89 30 54; 90 40 58
37. 91 41 59; 92 42 60; 97 49 50; 99 51 52; 101 53 54; 108 58 49; 109 59 51
38. 110 60 53; 111 9 61; 112 12 62; 113 15 63; 114 24 64; 115 27 65; 116 30 66
39. 117 50 67; 118 52 68; 119 54 69; 120 61 64; 121 62 65; 122 63 66; 123 64 67
40. 124 65 68; 125 66 69; 155 71 20; 157 70 71; 158 71 40; 162 74 5; 164 73 74
41. 165 74 37; 169 33 76; 170 36 77; 171 76 77; 172 76 63; 173 63 62; 174 62 61
42. 175 77 66; 176 66 65; 177 65 64; 178 74 71; 183 80 8; 184 81 11; 185 82 14
43. 186 83 23; 187 84 26; 188 85 29; 189 89 35; 190 90 32; 193 80 86; 194 81 87
44. 195 82 88; 197 86 83; 198 87 84; 199 88 92; 201 48 88; 202 47 87; 203 46 86
45. 204 90 89; 205 72 75; 206 75 90; 207 72 89; 237 91 42; 238 92 85; 239 91 92
46. ELEMENT INCIDENCES SHELL
47. 208 5 6 21 20; 209 8 9 24 23; 210 11 12 27 26; 211 14 15 30 29
48. 212 23 24 50 49; 213 26 27 52 51; 214 29 30 54 53; 215 5 20 71 74
49. 216 37 46 86 80; 217 8 23 83 80; 218 9 24 64 61; 219 38 47 87 81
50. 220 11 26 84 81; 221 12 27 65 62; 222 39 48 88 82; 223 14 29 85 82
51. 224 15 30 66 63; 225 33 36 89 90; 226 33 36 77 76; 227 40 83 86 46
52. 228 41 84 87 47; 229 42 85 88 48; 230 23 49 58 40; 231 24 50 67 64
53. 232 26 51 59 41; 233 27 52 68 65; 234 29 53 60 42; 235 30 54 69 66
54. 236 90 89 72 75
55. START GROUP DEFINITION
56. FLOOR
57. _GROUNDFLOOR 2 22 42 43
58. _2ND 4 24 44 TO 46 66 69 84 85 90 108 114 117 123 186 193 203
59. _3RD 48 49 70 76 112 115 121 184 187 194 198 202
60. _ROOFDECK 8 28 50 TO 52 68 71 88 92 110 113 116 122 188 195 201
61. END GROUP DEFINITION
62. ELEMENT PROPERTY
63. 208 TO 236 THICKNESS 0.125
64. DEFINE MATERIAL START
65. ISOTROPIC CONCRETE
66. E 2.17184E+007
67. POISSON 0.17
68. DENSITY 23.6158
69. ALPHA 5E-006
70. DAMP 0.05
71. TYPE CONCRETE
72. STRENGTH FCU 27578.9
73. END DEFINE MATERIAL
74. MEMBER PROPERTY AMERICAN
75. 2 4 6 8 22 24 26 28 42 TO 52 60 62 65 TO 71 75 TO 77 155 162 178 183 TO 190 -
76. 205 TO 207 237 PRIS YD 0.4 ZD 0.3
77. 10 11 13 TO 20 30 31 33 TO 40 53 TO 58 157 158 164 165 PRIS YD 0.5 ZD 0.5
78. MEMBER PROPERTY AMERICAN
79. 61 84 TO 92 97 99 101 108 TO 125 169 TO 171 193 TO 195 197 TO 199 201 TO 204 -
80. 238 239 PRIS YD 0.3 ZD 0.2
81. MEMBER PROPERTY AMERICAN
82. 172 TO 177 PRIS YD 0.15 ZD 0.15
83. CONSTANTS
84. MATERIAL CONCRETE ALL
85. SUPPORTS
86. 2 3 17 18 70 73 PINNED
87. MEMBER RELEASE
88. 97 99 101 108 TO 110 117 TO 125 171 193 TO 195 201 TO 204 START MP 0.75
89. 97 99 101 108 TO 110 117 TO 125 171 197 198 201 TO 204 238 END MP 0.75
90. DEFINE REFERENCE LOADS
91. LOAD R2 LOADTYPE DEAD TITLE DL
92. SELFWEIGHT Y 1
93. FLOOR LOAD
94. YRANGE 0 14 FLOAD 1.1 GY
95. MEMBER LOAD
96. 2 4 6 8 22 24 26 28 42 TO 52 66 TO 71 75 TO 77 155 162 178 183 TO 188 193 -
97. 194 TO 195 197 TO 199 237 238 UNI GY 7
98. 84 TO 92 97 99 101 108 TO 125 171 UNI GY 4
99. JOINT LOAD
100. 46 TO 48 FY 32.4
101. FLOOR LOAD
102. YRANGE 0 12 FLOAD 1 GY
103. YRANGE 0 12 FLOAD 0.5 GY
104. MEMBER LOAD
105. 239 CON GY 20
106. LOAD R1 LOADTYPE LIVE TITLE LL
107. FLOOR LOAD
108. _GROUNDFLOOR FLOAD 1.9 GY
109. _2ND FLOAD 1.9 GY
110. _3RD FLOAD 1.9 GY
111. _ROOFDECK FLOAD 1.9 GY
112. END DEFINE REFERENCE LOADS

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.


MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

113. DEFINE UBC LOAD


114. ZONE 0.4 I 1 RWX 8 RWZ 8 STYP 4 NA 1.5 NV 2
115. REFERENCE LOAD Y
*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE
WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

116. R2 -1.0
117. DEFINE WIND LOAD

*** NOTE: If any floor diaphragm is present in the model Wind Load definition
should be defined after Floor Diaphragm definition. Otherwise wind
load generation may be unsuccessful during analysis.

118. TYPE 1 WIND 1


119. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
120. ASCE-7-2010:PARAMS 300.000 KMPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 -
121. 2 12.000 M 5.000 M 10.000 M 2.000 0.010 2 -
122. 0 0 0 0 0.757 1.000 1.000 0.850 0 -
123. 0 0 0 0.862 -0.700 0.180
124. !> END GENERATED DATA BLOCK
125. INT -2.14825 -2.14825 0.614555 HEIG 0 12 4.572
126. EXP 1 JOINT 2 3 5 6 8 9 11 12 14 15 17 18 20 21 23 24 26 27 29 30 70 73
127. LOAD 1 LOADTYPE SEISMIC TITLE EQX
128. UBC LOAD X 1
129. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 73 NUMBER OF MEMBERS 128


NUMBER OF PLATES 29 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 420


TOTAL LOAD COMBINATION CASES = 0 SO FAR.

***********************************************************
* *
* X DIRECTION : Ta = 0.529 Tb = 0.817 Tuser = 0.000 *
* T = 0.529, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.2062 x 3658.49 = 754.56 KN *
* *
***********************************************************

130. CHANGE
131. LOAD 2 LOADTYPE SEISMIC TITLE EQX
132. UBC LOAD X -1.
133. PERFORM ANALYSIS

***********************************************************
* *
* X DIRECTION : Ta = 0.529 Tb = 0.817 Tuser = 0.000 *
* T = 0.529, LOAD FACTOR = -1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.2062 x 3658.49 = 754.56 KN *
* *
***********************************************************

134. CHANGE
135. LOAD 3 LOADTYPE SEISMIC TITLE EQZ
137. PERFORM ANALYSIS

***********************************************************
* *
* Z DIRECTION : Ta = 0.529 Tb = 0.895 Tuser = 0.000 *
* T = 0.529, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.2062 x 3658.49 = 754.56 KN *
* *
***********************************************************

138. CHANGE
139. LOAD 4 LOADTYPE SEISMIC TITLE EQZ
140. UBC LOAD Z -1.
141. PERFORM ANALYSIS

***********************************************************
* *
* Z DIRECTION : Ta = 0.529 Tb = 0.895 Tuser = 0.000 *
* T = 0.529, LOAD FACTOR = -1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.2062 x 3658.49 = 754.56 KN *
* *
***********************************************************

142. CHANGE
143. LOAD 5 LOADTYPE WIND TITLE WX
144. WIND LOAD X 1 TYPE 1
145. PERFORM ANALYSIS

146. CHANGE
147. LOAD 6 LOADTYPE WIND TITLE WX -
148. WIND LOAD X -1 TYPE 1
149. PERFORM ANALYSIS

150. CHANGE
151. LOAD 7 LOADTYPE WIND TITLE WZ
152. WIND LOAD Z 1 TYPE 1
153. PERFORM ANALYSIS

154. CHANGE
155. LOAD 8 LOADTYPE WIND TITLE WZ -
156. WIND LOAD Z -1 TYPE 1
157. PERFORM ANALYSIS

158. CHANGE
159. LOAD 9 LOADTYPE DEAD TITLE DL
160. REFERENCE LOAD
161. R2 -1.0
162. LOAD 10 LOADTYPE DEAD TITLE LL
163. REFERENCE LOAD
164. R1 -1.0
165. LOAD 11 GENERATED ACI TABLE1 1
166. REPEAT LOAD
167. 9 1.4 10 1.4
168. LOAD 12 GENERATED ACI TABLE1 2
169. REPEAT LOAD
170. 9 1.2 10 1.2
171. LOAD 13 GENERATED ACI TABLE1 3
172. REPEAT LOAD
173. 9 1.2 10 1.2 5 0.8
174. LOAD 14 GENERATED ACI TABLE1 4
175. REPEAT LOAD
176. 9 1.2 10 1.2 6 0.8
177. LOAD 15 GENERATED ACI TABLE1 5
178. REPEAT LOAD
179. 9 1.2 10 1.2 7 0.8
180. LOAD 16 GENERATED ACI TABLE1 6
181. REPEAT LOAD
182. 9 1.2 10 1.2 8 0.8
183. LOAD 17 GENERATED ACI TABLE1 7
184. REPEAT LOAD
185. 9 1.2 10 1.2 5 1.6
186. LOAD 18 GENERATED ACI TABLE1 8
187. REPEAT LOAD
188. 9 1.2 10 1.2 6 1.6
189. LOAD 19 GENERATED ACI TABLE1 9
190. REPEAT LOAD
191. 9 1.2 10 1.2 7 1.6
192. LOAD 20 GENERATED ACI TABLE1 10
193. REPEAT LOAD
194. 9 1.2 10 1.2 8 1.6
195. LOAD 21 GENERATED ACI TABLE1 11
196. REPEAT LOAD
197. 9 1.2 10 1.2 1 1.0
198. LOAD 22 GENERATED ACI TABLE1 12
199. REPEAT LOAD
200. 9 1.2 10 1.2 2 1.0
201. LOAD 23 GENERATED ACI TABLE1 13
202. REPEAT LOAD
203. 9 1.2 10 1.2 3 1.0
204. LOAD 24 GENERATED ACI TABLE1 14
205. REPEAT LOAD
206. 9 1.2 10 1.2 4 1.0
207. LOAD 25 GENERATED ACI TABLE1 15
208. REPEAT LOAD
209. 9 0.9 10 0.9 5 1.6
210. LOAD 26 GENERATED ACI TABLE1 16
211. REPEAT LOAD
212. 9 0.9 10 0.9 6 1.6
213. LOAD 27 GENERATED ACI TABLE1 17
214. REPEAT LOAD
215. 9 0.9 10 0.9 7 1.6
216. LOAD 28 GENERATED ACI TABLE1 18
217. REPEAT LOAD
218. 9 0.9 10 0.9 8 1.6
219. LOAD 29 GENERATED ACI TABLE1 19
220. REPEAT LOAD
221. 9 0.9 10 0.9 1 1.0
222. LOAD 30 GENERATED ACI TABLE1 20
223. REPEAT LOAD
224. 9 0.9 10 0.9 2 1.0
225. LOAD 31 GENERATED ACI TABLE1 21
226. REPEAT LOAD
227. 9 0.9 10 0.9 3 1.0
228. LOAD 32 GENERATED ACI TABLE1 22
229. REPEAT LOAD
230. 9 0.9 10 0.9 4 1.0
231. PERFORM ANALYSIS

232. START CONCRETE DESIGN


233. CODE ACI
234. DESIGN BEAM 2 4 6 8 22 24 26 28 42 TO 52 60 TO 62 65 TO 71 75 TO 77 -
235. 84 TO 92 97 99 101 108 TO 125 155 162 169 TO 171 178 183 TO 190 193 TO 195 -
236. 197 TO 199 201 TO 207 237 TO 239

ACI 318-11 BEAM NO. 2 DESIGN RESULTS


=============================================
LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 4549. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 234.26 KN-MET, LOADING 22

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 249.49 KN-MET, LOADING 21

___ 5J____________________ 4549X 300X 400_____________________ 6J____


| |
| |
| |
| |
| 4No25 H 63. 0.TO 4549 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 4 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 3 - 25MM 0. 4549. YES YES


2 337. 4 - 25MM 0. 3802. YES NO

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2020. MM2, MAX. STEEL PERMISSIBLE = 2148. MM2
MAX NEG MOMENT = 207.23 KN-MET, LOADING 21

___ 8J____________________ 4549X 300X 400_____________________ 9J____


| |
||============================================================== |
| 4No25 H 337. 0.TO 3802 |
| |
| 3No25 H 63. 0.TO 4549 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | |
| | | | | | | | | |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 6 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 3 - 20MM 0. 4549. YES YES


2 333. 2 - 32MM 0. 4549. YES YES

B E A M N O. 6 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.24 KNS Vc= 91.02 KNS Vs= 0.00 KNS
Tu= 0.23 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 18
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1938. MM

AT END SUPPORT - Vu= 39.68 KNS Vc= 88.64 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1938. MM

___ 11J____________________ 4549X 300X 400_____________________ 12J____


| |
||=========================================================================||
| 2No32 H 333.| 0.TO 4549| | | | | | | | | | | | | | | | | |
| 13*12c/c170 | | | | | | | | | | | | | | | | 13*12c/c170 | |
| 3No20 H 61.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| OO | | OO | | OO | | OO | | OO |
| 2#32 | | 2#32 | | 2#32 | | 2#32 | | 2#32 |
| | | | | | | | | |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 8 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 5 - 12MM 0. 4549. YES YES
2 339. 3 - 20MM 0. 2256. YES NO
3 339. 4 - 20MM 1244. 4549. NO YES

B E A M N O. 8 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 39.10 KNS Vc= 91.90 KNS Vs= 0.00 KNS
Tu= 0.28 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1938. MM

AT END SUPPORT - Vu= 46.42 KNS Vc= 89.60 KNS Vs= 0.00 KNS
Tu= 0.28 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1938. MM

___ 14J____________________ 4549X 300X 400_____________________ 15J____


| |
||=========================================================================||
| 3No20 H 339.| 0.TO42256|H 339.1244.TO 4549 | | | | | | | | | | |
| 13*12c/c172 | | | | | | | | | | | | | | | | 13*12c/c172 | |
| 5No12 H 57.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | ooo | | oooo | | oooo | | oooo |
| 3#20 | | 3#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 22 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 4549. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 245.73 KN-MET, LOADING 22

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 260.70 KN-MET, LOADING 21

___ 20J____________________ 4549X 300X 400_____________________ 21J____


| |
| |
| |
| 4No25 H 63. 0.TO 4549 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 24 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 4549. YES YES


2 333. 2 - 32MM 0. 3458. YES NO
3 337. 4 - 25MM 558. 4549. NO YES

B E A M N O. 24 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 100.68 KNS Vc= 88.95 KNS Vs= 45.29 KNS
Tu= 0.03 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 22
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1938. MM

AT END SUPPORT - Vu= 105.37 KNS Vc= 88.47 KNS Vs= 52.02 KNS
Tu= 0.03 KN-MET Tc= 3.3 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1938. MM

___ 23J____________________ 4549X 300X 400_____________________ 24J____


| |
||=========================================================================||
| 2No32 H 333.5 H0.TO.3458.TO|4549 | | | | | | | | | | | | | | |
| 13*12c/c170 | | | | | | | | | | | | | | | | 13*12c/c170 | |
| 4No20 H 61.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| OO | | oOOo | | oOOo | | oOOo | | oooo |
| 2#32 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|
ACI 318-11 BEAM NO. 26 DESIGN RESULTS
=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 4 - 16MM 0. 4549. YES YES


2 337. 3 - 25MM 0. 4549. YES YES

B E A M N O. 26 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 35.05 KNS Vc= 89.25 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

AT END SUPPORT - Vu= 41.09 KNS Vc= 89.25 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

___ 26J____________________ 4549X 300X 400_____________________ 27J____


| |
||=========================================================================||
| 3No25 H 337.| 0.TO 4549| | | | | | | | | | | | | | | | | |
| 13*12c/c171 | | | | | | | | | | | | | | | | 13*12c/c171 | |
| 4No16 H 59.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 28 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 4549. YES YES


2 341. 4 - 16MM 0. 2109. YES NO
3 337. 2 - 25MM 1511. 4549. NO YES

B E A M N O. 28 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 42.03 KNS Vc= 89.29 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

AT END SUPPORT - Vu= 47.69 KNS Vc= 88.11 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

___ 29J____________________ 4549X 300X 400_____________________ 30J____


| |
||=========================================================================||
| 4No16 H 341.| 0.TO 21092No25 H 337.1511.TO 4549| | | | | | | | | |
| 13*12c/c171 | | | | | | | | | | | | | | | | 13*12c/c171 | |
| 2No16 H 59.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oo | | oo | | oo |
| 4#16 | | 4#16 | | 2#25 | | 2#25 | | 2#25 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 42 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX POS MOMENT = 230.84 KN-MET, LOADING 31

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 295.42 KN-MET, LOADING 24

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 298.75 KN-MET, LOADING 23

___ 5J____________________ 4502X 300X 400_____________________ 20J____


| |
| |
| |
| |
| |
| |
| |
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 43 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX POS MOMENT = 249.91 KN-MET, LOADING 31

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 300.98 KN-MET, LOADING 24

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 305.53 KN-MET, LOADING 23

___ 6J____________________ 4502X 300X 400_____________________ 21J____


| |
| |
| |
| |
| |
| |
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 44 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 2600. YES YES


***MEMBER FAILS IN MAX REINFORCEMENT.
INCREASE MEMBER SIZE.
MAX NEG MOMENT = 261.10 KN-MET, LOADING 24

2 343. 2 - 12MM 2048. 2600. NO YES

___ 37J____________________ 2599X 300X 400_____________________ 46J____


| |
| ================||
| 2No12 H 343.2048.TO 2600 |
| |
| 4No25 H 63. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | oo |
| | | | | | | | | 2#12 |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 45 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 4502. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 240.69 KN-MET, LOADING 24

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 249.58 KN-MET, LOADING 23

___ 8J____________________ 4502X 300X 400_____________________ 23J____


| |
| |
| |
| |
| 4No25 H 63. 0.TO 4502 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|
ACI 318-11 BEAM NO. 46 DESIGN RESULTS
=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 67. 2 - 32MM 0. 4502. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 219.92 KN-MET, LOADING 24

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 229.60 KN-MET, LOADING 23

___ 9J____________________ 4502X 300X 400_____________________ 24J____


| |
| |
| |
| |
| 2No32 H 67. 0.TO 4502 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 2#32 | | 2#32 | | 2#32 | | 2#32 | | 2#32 |
| OO | | OO | | OO | | OO | | OO |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 47 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 2600. YES YES

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2016. MM2, MAX. STEEL PERMISSIBLE = 2148. MM2
MAX NEG MOMENT = 206.89 KN-MET, LOADING 24

___ 38J____________________ 2599X 300X 400_____________________ 47J____


| |
| |
| |
| |
| 4No20 H 61. 0.TO 2600 |
||=========================================================================||
| |
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 48 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 4502. YES YES


2 337. 4 - 25MM 0. 3783. YES NO
3 337. 4 - 25MM 532. 4502. NO YES

B E A M N O. 48 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 108.06 KNS Vc= 88.92 KNS Vs= 55.16 KNS
Tu= 1.00 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 24
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1915. MM

AT END SUPPORT - Vu= 111.90 KNS Vc= 88.52 KNS Vs= 60.68 KNS
Tu= 0.73 KN-MET Tc= 3.3 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1915. MM

___ 11J____________________ 4502X 300X 400_____________________ 26J____


| |
||=========================================================================||
| 4No25 H4337.|H 0.TO 3783TO 4502 | | | | | | | | | | | | | | |
| 13*12c/c170 | | | | | | | | | | | | | | | | 13*12c/c170 | |
| 4No20 H 61.| 0.TO 4502| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 49 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS


LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 4502. YES YES


2 333. 2 - 32MM 0. 3438. YES NO
3 337. 4 - 25MM 532. 4502. NO YES

B E A M N O. 49 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 93.75 KNS Vc= 88.85 KNS Vs= 36.16 KNS
Tu= 0.98 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 24
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1915. MM

AT END SUPPORT - Vu= 98.39 KNS Vc= 88.73 KNS Vs= 42.46 KNS
Tu= 0.68 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 170. MM C/C FOR 1915. MM

___ 12J____________________ 4502X 300X 400_____________________ 27J____


| |
||=========================================================================||
| 2No32 H4333.|H 0.TO 3438TO 4502 | | | | | | | | | | | | | | |
| 13*12c/c170 | | | | | | | | | | | | | | | | 13*12c/c170 | |
| 4No20 H 61.| 0.TO 4502| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| OO | | oOOo | | oOOo | | oOOo | | oooo |
| 2#32 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 50 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 2 - 20MM 0. 2600. YES YES


2 337. 3 - 25MM 0. 2600. YES YES

B E A M N O. 50 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 46.33 KNS Vc= 88.39 KNS Vs= 0.00 KNS
Tu= 11.84 KN-MET Tc= 3.3 KN-MET Ts= 15.8 KN-MET LOAD 22
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 963. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.56 SQ.CM.

AT END SUPPORT - Vu= 16.84 KNS Vc= 88.39 KNS Vs= 0.00 KNS
Tu= 11.84 KN-MET Tc= 3.3 KN-MET Ts= 15.8 KN-MET LOAD 22
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 963. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.56 SQ.CM.

___ 39J____________________ 2599X 300X 400_____________________ 48J____


| |
||=========================================================================||
| 3No25 H 337.| 0.TO 2600| | | | | | | | | | | | |
| 9*12c/c131 | | | | | | | | | | | 9*12c/c131 | |
| 2No20 H |61.| 0.TO 2600| | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 51 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 3 - 16MM 0. 4502. YES YES


2 339. 4 - 20MM 0. 2721. YES NO
3 339. 4 - 20MM 1219. 4502. NO YES

B E A M N O. 51 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 47.96 KNS Vc= 92.81 KNS Vs= 0.00 KNS
Tu= 0.24 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1915. MM

AT END SUPPORT - Vu= 52.30 KNS Vc= 91.09 KNS Vs= 0.00 KNS
Tu= 0.24 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1915. MM

___ 14J____________________ 4502X 300X 400_____________________ 29J____


| |
||=========================================================================||
| 4No20 H 339.| 0.TO42721|H 339.1219.TO 4502 | | | | | | | | | | |
| 13*12c/c171 | | | | | | | | | | | | | | | | 13*12c/c171 | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 52 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 5 - 12MM 0. 4502. YES YES


2 339. 4 - 20MM 0. 2721. YES NO
3 339. 4 - 20MM 1219. 4502. NO YES

B E A M N O. 52 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 44.90 KNS Vc= 89.80 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1915. MM

AT END SUPPORT - Vu= 49.44 KNS Vc= 89.80 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1915. MM

___ 15J____________________ 4502X 300X 400_____________________ 30J____


| |
||=========================================================================||
| 4No20 H 339.| 0.TO42721|H 339.1219.TO 4502 | | | | | | | | | | |
| 13*12c/c172 | | | | | | | | | | | | | | | | 13*12c/c172 | |
| 5No12 H 57.| 0.TO 4502| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 60 DESIGN RESULTS


=============================================
LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 4549. YES YES


2 343. 5 - 12MM 0. 4549. YES YES

B E A M N O. 60 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 9.06 KNS Vc= 102.93 KNS Vs= 0.00 KNS
Tu= 3.43 KN-MET Tc= 3.4 KN-MET Ts= 4.6 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1938. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.03 SQ.CM.

AT END SUPPORT - Vu= 33.92 KNS Vc= 85.58 KNS Vs= 0.00 KNS
Tu= 0.37 KN-MET Tc= 3.2 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

___ 32J____________________ 4549X 300X 400_____________________ 33J____


| |
||=========================================================================||
| 5No12 H 343.| 0.TO 4549| | | | | | | | | | | | | | | | | |
| 16*12c/c131 | | | | | | | | | | | | | | | | 13*12c/c171 | |
| 2No16 H 59.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 61 DESIGN RESULTS


=============================================

LEN - 4. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

B E A M N O. 61 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 61 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.
** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 61 IS BEYOND
THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 72J____________________ 3X 200X 300_____________________ 79J____


| |
| |
| |
| |
| |
| |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 62 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 4549. YES YES


2 343. 5 - 12MM 0. 4549. YES YES

B E A M N O. 62 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 9.09 KNS Vc= 88.16 KNS Vs= 0.00 KNS
Tu= 3.69 KN-MET Tc= 3.3 KN-MET Ts= 4.9 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1938. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.11 SQ.CM.

AT END SUPPORT - Vu= 32.68 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.2 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 171. MM C/C FOR 1938. MM

___ 35J____________________ 4549X 300X 400_____________________ 36J____


| |
||=========================================================================||
| 5No12 H 343.| 0.TO 4549| | | | | | | | | | | | | | | | | |
| 16*12c/c131 | | | | | | | | | | | | | | | | 13*12c/c171 | |
| 2No16 H 59.| 0.TO 4549| | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 65 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 4502. YES YES


2 343. 5 - 12MM 0. 4502. YES YES

B E A M N O. 65 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.54 KNS Vc= 91.36 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 9.58 KNS Vc= 89.10 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 33J____________________ 4502X 300X 400_____________________ 36J____


| |
||=========================================================================||
| 5No12 H 343. 0.TO 4502 |
| |
| 2No16 H 59. 0.TO 4502 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 66 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 3 - 25MM 0. 1500. YES YES

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2074. MM2, MAX. STEEL PERMISSIBLE = 2148. MM2
MAX NEG MOMENT = 211.50 KN-MET, LOADING 22

___ 37J____________________ 1500X 300X 400_____________________ 80J____


| |
| |
| |
| |
| 3No25 H 63. 0.TO 1500 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 67 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 3 - 20MM 0. 1500. YES YES


2 333. 2 - 32MM 0. 1500. YES YES

B E A M N O. 67 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 50.59 KNS Tu= 30.5 KN-MET


Vc= 88.0 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 24 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 39.46 KNS Tu= 30.5 KN-MET
Vc= 88.0 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 24 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 38J____________________ 1500X 300X 400_____________________ 81J____


| |
||=========================================================================||
| 2No32 H 333. 0.TO 1500 |
| |
| 3No20 H 61. 0.TO 1500 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| OO | | OO | | OO | | OO | | OO |
| 2#32 | | 2#32 | | 2#32 | | 2#32 | | 2#32 |
| | | | | | | | | |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|
ACI 318-11 BEAM NO. 68 DESIGN RESULTS
=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 5 - 12MM 0. 1500. YES YES


2 339. 4 - 20MM 0. 1500. YES YES

B E A M N O. 68 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 50.46 KNS Vc= 88.17 KNS Vs= 0.00 KNS
Tu= 20.64 KN-MET Tc= 3.3 KN-MET Ts= 27.5 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 6.21 SQ.CM.

AT END SUPPORT - Vu= 38.32 KNS Vc= 88.17 KNS Vs= 0.00 KNS
Tu= 20.64 KN-MET Tc= 3.3 KN-MET Ts= 27.5 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 6.21 SQ.CM.

___ 39J____________________ 1500X 300X 400_____________________ 82J____


| |
||=========================================================================||
| 4No20 H|339. |0.TO 1500 | | | | | | |
| 5*12c/c131 | | | | | | 5*12c/c131 | |
| 5No12 H| 57. |0.TO 1500 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 69 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 1500. YES YES


2 337. 4 - 25MM 0. 1500. YES YES

B E A M N O. 69 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 54.53 KNS Tu= 40.5 KN-MET
Vc= 99.9 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 42.06 KNS Tu= 40.5 KN-MET
Vc= 100.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 40J____________________ 1500X 300X 400_____________________ 83J____


| |
||=========================================================================||
| 4No25 H 337. 0.TO 1500 |
| |
| 4No20 H 61. 0.TO 1500 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 70 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 4 - 16MM 0. 1500. YES YES


2 337. 3 - 25MM 0. 1500. YES YES

B E A M N O. 70 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 57.86 KNS Tu= 32.6 KN-MET


Vc= 88.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 44.95 KNS Tu= 32.6 KN-MET
Vc= 88.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 41J____________________ 1500X 300X 400_____________________ 84J____


| |
||=========================================================================||
| 3No25 H 337. 0.TO 1500 |
| |
| 4No16 H 59. 0.TO 1500 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 71 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 5 - 12MM 0. 1500. YES YES


2 337. 2 - 25MM 0. 1500. YES YES

B E A M N O. 71 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 56.94 KNS Tu= 23.3 KN-MET


Vc= 88.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 44.66 KNS Tu= 23.3 KN-MET
Vc= 88.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 42J____________________ 1500X 300X 400_____________________ 85J____


| |
||=========================================================================||
| 2No25 H 337. 0.TO 1500 |
| |
| 5No12 H 57. 0.TO 1500 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#25 | | 2#25 | | 2#25 | | 2#25 | | 2#25 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 75 DESIGN RESULTS


=============================================

LEN - 1902. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 1902. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 278.92 KN-MET, LOADING 23
| |
| |
| |
| |
| 4No25 H 63. 0.TO 1902 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 76 DESIGN RESULTS


=============================================

LEN - 1902. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 1902. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 225.26 KN-MET, LOADING 23

___ 47J____________________ 1902X 300X 400_____________________ 41J____


| |
| |
| |
| |
| 4No20 H 61. 0.TO 1902 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 77 DESIGN RESULTS


=============================================

LEN - 951. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 5 - 12MM 0. 951. YES YES


2 343. 4 - 12MM 0. 951. YES YES
B E A M N O. 77 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.88 KNS Vc= 89.30 KNS Vs= 0.00 KNS
Tu= 0.66 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 139. MM

AT END SUPPORT - Vu= 43.13 KNS Vc= 91.96 KNS Vs= 0.00 KNS
Tu= 0.66 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 139. MM

___ 48J____________________ 951X 300X 400_____________________ 91J____


| |
||=========================================================================||
| 4No12 H 343. |0.TO 951 | | |
| 2*12c/c172 | | 2*12c/c172 | |
| 5No12 H 57. |0.TO 951 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#12 | | 4#12 | | 4#12 | | 4#12 | | 4#12 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 84 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 168. 600. NO YES


2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 84 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 30.44 KNS Tu= 6.3 KN-MET


Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 29.36 KNS Tu= 6.3 KN-MET
Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 23J____________________ 600X 200X 300_____________________ 49J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| 2No12 H 57. 168.TO 600 |
| ======================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 85 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 600. YES YES


2 239. 2 - 20MM 0. 600. YES YES

B E A M N O. 85 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 13.12 KNS Tu= 5.3 KN-MET


Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 18 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 12.04 KNS Tu= 5.3 KN-MET
Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 18 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 24J____________________ 600X 200X 300_____________________ 50J____


| |
||=========================================================================||
| 2No20 H 239. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 86 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 213. 600. NO YES
2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 86 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 27.18 KNS Tu= 4.8 KN-MET


Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 26.17 KNS Tu= 4.8 KN-MET
Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 26J____________________ 600X 200X 300_____________________ 51J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 213.TO 600 |
| =================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 87 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 600. YES YES


2 243. 3 - 12MM 0. 600. YES YES

B E A M N O. 87 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 71.56 KNS Tu= 17.6 KN-MET


Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 70.55 KNS Tu= 17.6 KN-MET
Vc= 42.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 27J____________________ 600X 200X 300_____________________ 52J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 600 |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 88 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 285. 600. NO YES


2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 88 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.01 KNS Tu= 13.4 KN-MET


Vc= 42.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 36.93 KNS Tu= 13.4 KN-MET
Vc= 42.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 29J____________________ 600X 200X 300_____________________ 53J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 285.TO 600 |
| =======================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 89 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 375. YES NO
2 57. 2 - 12MM 80. 600. NO YES
3 243. 3 - 12MM 0. 600. YES YES

B E A M N O. 89 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 57.70 KNS Tu= 10.3 KN-MET


Vc= 44.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 56.68 KNS Tu= 10.3 KN-MET
Vc= 57.0 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 30J____________________ 600X 200X 300_____________________ 54J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 600 |
| |
| 2No12 H 57.12 0.TO7.3750.TO 600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 90 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 252. YES NO


2 57. 2 - 12MM 411. 600. NO YES
3 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 90 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 14.04 KNS Tu= 7.2 KN-MET


Vc= 41.1 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 13.05 KNS Tu= 7.2 KN-MET
Vc= 41.6 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 40J____________________ 600X 200X 300_____________________ 58J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 252 2No12 H 57. 411.TO 600 |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| oo | | oo | | | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 91 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 323. 600. NO YES


2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 91 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 13.49 KNS Tu= 5.6 KN-MET


Vc= 41.0 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 12.57 KNS Tu= 5.6 KN-MET
Vc= 41.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 17 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 41J____________________ 600X 200X 300_____________________ 59J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 323.TO 600 |
| ===================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | | | 2#12 | | 2#12 |
| | | | | | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 92 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 485. 600. NO YES
2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 92 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 11.24 KNS Tu= 14.4 KN-MET


Vc= 42.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 10.25 KNS Tu= 14.4 KN-MET
Vc= 42.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 42J____________________ 600X 200X 300_____________________ 60J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 485.TO 600 |
| ==============||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | | | | | 2#12 |
| | | | | | | | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 97 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4457. YES NO


2 243. 2 - 12MM 0. 721. YES NO
3 243. 2 - 12MM 4018. 4549. NO YES

B E A M N O. 97 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 12.67 KNS Vc= 48.40 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 12.50 KNS Vc= 51.21 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 49J____________________ 4549X 200X 300_____________________ 50J____


| |
||=========== ========||
| 2No12 H 243. 0.TO 721 2No12 H 243.4018.TO 4549 |
| |
| 2No12 H 57. 0.TO 4457 |
||========================================================================= |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 99 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4458. YES NO


2 243. 2 - 12MM 0. 4549. YES YES

B E A M N O. 99 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 17.76 KNS Vc= 42.46 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2038. MM

AT END SUPPORT - Vu= 17.48 KNS Vc= 42.46 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2038. MM

___ 51J____________________ 4549X 200X 300_____________________ 52J____


| |
||=========================================================================||
| 2No12 H 243.| 0.TO 4549| | | | | | | | | | | | | | | | | |
| 18*12c/c122 | | | | | | | | | | | | | | | | 18*12c/c122 | |
| 2No12 H 57.| 0.TO 4458| | | | | | | | | | | | | | | | | |
||========================================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 101 DESIGN RESULTS


=============================================

LEN - 4549. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS


LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4549. YES YES


2 243. 2 - 12MM 0. 721. YES NO
3 243. 2 - 12MM 4018. 4549. NO YES

B E A M N O. 101 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 12.70 KNS Vc= 48.31 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 12.47 KNS Vc= 52.75 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 53J____________________ 4549X 200X 300_____________________ 54J____


| |
||=========== ========||
| 2No12 H 243. 0.TO 721 2No12 H 243.4018.TO 4549 |
| |
| 2No12 H 57. 0.TO 4549 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 108 DESIGN RESULTS


=============================================

LEN - 4550. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4492. YES NO


2 243. 2 - 12MM 0. 341. YES NO
3 243. 2 - 12MM 3640. 4550. NO YES

B E A M N O. 108 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 19.48 KNS Vc= 42.42 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

AT END SUPPORT - Vu= 18.94 KNS Vc= 42.42 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

___ 58J____________________ 4550X 200X 300_____________________ 49J____


| |
||==== ===============||
| 2No12 H 243. 0.TO 341 2No12 H 243.3640.TO 4550 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4492 | | | | | |
||==========================================================================|
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 109 DESIGN RESULTS


=============================================

LEN - 4550. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4550. YES YES


2 243. 2 - 12MM 0. 341. YES NO
3 243. 2 - 12MM 4019. 4550. NO YES

B E A M N O. 109 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 17.88 KNS Vc= 42.51 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

AT END SUPPORT - Vu= 17.37 KNS Vc= 42.51 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

___ 59J____________________ 4550X 200X 300_____________________ 51J____


| |
||==== ========||
| 2No12 H 243. 0.TO 341 2No12 H 243.4019.TO 4550 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4550 | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 110 DESIGN RESULTS


=============================================

LEN - 4550. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4492. YES NO


2 243. 2 - 12MM 0. 341. YES NO
3 243. 2 - 12MM 4019. 4550. NO YES

B E A M N O. 110 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 19.48 KNS Vc= 49.65 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

AT END SUPPORT - Vu= 16.23 KNS Vc= 42.48 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2039. MM

___ 60J____________________ 4550X 200X 300_____________________ 53J____


| |
||==== ========||
| 2No12 H 243. 0.TO 341 2No12 H 243.4019.TO 4550 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4492 | | | |
||==========================================================================|
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 111 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 850. YES YES
2 239. 2 - 20MM 0. 850. YES YES

B E A M N O. 111 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 26.88 KNS Tu= 6.6 KN-MET


Vc= 42.1 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 15 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 24.03 KNS Tu= 6.6 KN-MET
Vc= 52.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 15 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 9J____________________ 850X 200X 300_____________________ 61J____


| |
||=========================================================================||
| 2No20 H 239. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 112 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 428. 850. NO YES


2 243. 3 - 12MM 0. 850. YES YES

B E A M N O. 112 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 17.69 KNS Tu= 7.3 KN-MET


Vc= 41.7 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 19 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 14.56 KNS Tu= 7.3 KN-MET
Vc= 48.9 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 19 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 12J____________________ 850X 200X 300_____________________ 62J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 428.TO 850 |
| =====================================||
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| | | | | | | 2#12 | | 2#12 |
| | | | | | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 113 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 243. 3 - 12MM 0. 850. YES YES

B E A M N O. 113 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 14.31 KNS Tu= 9.8 KN-MET


Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 11.18 KNS Tu= 9.8 KN-MET
Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 15J____________________ 850X 200X 300_____________________ 63J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 114 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 237. 2 - 25MM 0. 850. YES YES

B E A M N O. 114 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 19.10 KNS Tu= 4.9 KN-MET


Vc= 42.1 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 16 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 15.70 KNS Tu= 4.9 KN-MET
Vc= 44.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 16 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 24J____________________ 850X 200X 300_____________________ 64J____


| |
||=========================================================================||
| 2No25 H 237. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#25 | | 2#25 | | 2#25 | | 2#25 | | 2#25 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 115 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 663. YES NO


2 57. 2 - 12MM 357. 850. NO YES
3 241. 2 - 16MM 0. 850. YES YES

B E A M N O. 115 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 33.76 KNS Tu= 5.5 KN-MET


Vc= 42.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 19 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 30.31 KNS Tu= 5.5 KN-MET
Vc= 74.5 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 19 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 27J____________________ 850X 200X 300_____________________ 65J____


| |
||=========================================================================||
| 2No16 H 241. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 663 2No12 H 57. 357.TO 850 |
||=========================================================================||
| |
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 116 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 327. YES NO


2 57. 2 - 12MM 348. 850. NO YES
3 243. 3 - 12MM 0. 850. YES YES

B E A M N O. 116 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 37.34 KNS Tu= 7.9 KN-MET


Vc= 41.9 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 33.89 KNS Tu= 7.9 KN-MET
Vc= 74.6 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 30J____________________ 850X 200X 300_____________________ 66J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 327 2No12 H 57. 348.TO 850 |
||============================ ============================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 117 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 243. 2 - 12MM 0. 850. YES YES

B E A M N O. 117 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 16.50 KNS Vc= 42.49 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 189. MM

AT END SUPPORT - Vu= 0.29 KNS Vc= 42.54 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 50J____________________ 850X 200X 300_____________________ 67J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 850 |
| 3*12c/c122| | |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 118 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 243. 2 - 12MM 0. 850. YES YES

B E A M N O. 118 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.10 KNS Vc= 41.38 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.21 KNS Vc= 40.55 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 52J____________________ 850X 200X 300_____________________ 68J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 119 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 243. 2 - 12MM 0. 850. YES YES

B E A M N O. 119 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.90 KNS Vc= 42.52 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.41 KNS Vc= 42.52 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 54J____________________ 850X 200X 300_____________________ 69J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 120 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 4502. YES YES
2 243. 2 - 12MM 0. 717. YES NO
3 243. 2 - 12MM 3973. 4502. NO YES

B E A M N O. 120 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 18.50 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

AT END SUPPORT - Vu= 18.05 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

___ 61J____________________ 4502X 200X 300_____________________ 64J____


| |
||=========== ========||
| 2No12 H 243. 0.TO 717 2No12 H 243.3973.TO 4502 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4502 | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 121 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4464. YES NO


2 243. 2 - 12MM 0. 341. YES NO
3 243. 2 - 12MM 3973. 4502. NO YES

B E A M N O. 121 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 20.67 KNS Vc= 50.24 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

AT END SUPPORT - Vu= 17.37 KNS Vc= 42.51 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 13
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

___ 62J____________________ 4502X 200X 300_____________________ 65J____


| |
||==== ========||
| 2No12 H 243. 0.TO 341 2No12 H 243.3973.TO 4502 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4464 | | | |
||==========================================================================|
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | | | | | | | oo |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 122 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4466. YES NO


2 243. 2 - 12MM 0. 341. YES NO
3 243. 2 - 12MM 3973. 4502. NO YES

B E A M N O. 122 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 20.66 KNS Vc= 42.51 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

AT END SUPPORT - Vu= 20.27 KNS Vc= 42.51 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 11
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 2015. MM

___ 63J____________________ 4502X 200X 300_____________________ 66J____


| |
||==== ========||
| 2No12 H 243. 0.TO 341 2No12 H 243.3973.TO 4502 |
| 18*12c/c122 18*12c/c122 | |
| 2No12 H 57. 0.TO 4466 | | | |
||==========================================================================|
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| 2#12 | | | | | | | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 123 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 600. YES YES


2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 123 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.26 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.03 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 64J____________________ 600X 200X 300_____________________ 67J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 124 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 600. YES YES


2 243. 2 - 12MM 0. 600. YES YES
B E A M N O. 124 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.01 KNS Vc= 42.54 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.77 KNS Vc= 42.54 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 65J____________________ 600X 200X 300_____________________ 68J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 125 DESIGN RESULTS


=============================================

LEN - 600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 600. YES YES


2 243. 2 - 12MM 0. 600. YES YES

B E A M N O. 125 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.48 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.29 KNS Vc= 42.53 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 66J____________________ 600X 200X 300_____________________ 69J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 600 |
| |
| 2No12 H 57. 0.TO 600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 155 DESIGN RESULTS


=============================================

LEN - 4550. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2024. MM2, MAX. STEEL PERMISSIBLE = 2148. MM2
MAX POS MOMENT = 207.56 KN-MET, LOADING 29

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 249.80 KN-MET, LOADING 22

___ 71J____________________ 4550X 300X 400_____________________ 20J____


| |
| |
| |
| |
| |
| |
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 162 DESIGN RESULTS


=============================================

LEN - 4550. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 4 - 25MM 0. 4550. YES YES

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 237.80 KN-MET, LOADING 22

___ 74J____________________ 4550X 300X 400_____________________ 5J____


| |
| |
| |
| 4No25 H 63. 0.TO 4550 |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 169 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 241. 2 - 16MM 0. 850. YES YES

B E A M N O. 169 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 6.88 KNS Tu= 5.7 KN-MET


Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 6.07 KNS Tu= 5.7 KN-MET
Vc= 42.4 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 33J____________________ 850X 200X 300_____________________ 76J____


| |
||=========================================================================||
| 2No16 H 241. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 170 DESIGN RESULTS


=============================================

LEN - 850. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 850. YES YES


2 243. 3 - 12MM 0. 850. YES YES

B E A M N O. 170 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 18.92 KNS Tu= 5.1 KN-MET


Vc= 41.6 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 18.11 KNS Tu= 5.1 KN-MET
Vc= 45.0 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 23 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 36J____________________ 850X 200X 300_____________________ 77J____


| |
||=========================================================================||
| 3No12 H 243. 0.TO 850 |
| |
| 2No12 H 57. 0.TO 850 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 171 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4398. YES NO


2 243. 2 - 12MM 0. 4502. YES YES

B E A M N O. 171 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 11.94 KNS Vc= 49.17 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 11.70 KNS Vc= 57.06 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 76J____________________ 4502X 200X 300_____________________ 77J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 4502 |
| |
||========================================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 178 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX POS MOMENT = 249.06 KN-MET, LOADING 31

***MEMBER FAILS IN MAX REINFORCEMENT.


INCREASE MEMBER SIZE.
MAX NEG MOMENT = 296.00 KN-MET, LOADING 23

___ 74J____________________ 4502X 300X 400_____________________ 71J____


| |
| |
| |
| |
| |
| |
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 183 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 4 - 20MM 0. 3050. YES YES


2 341. 2 - 16MM 0. 1100. YES NO
3 337. 4 - 25MM 0. 3050. YES YES
B E A M N O. 183 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 12.65 KNS Vc= 86.96 KNS Vs= 0.00 KNS
Tu= 17.23 KN-MET Tc= 3.4 KN-MET Ts= 23.0 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.18 SQ.CM.

AT END SUPPORT - Vu= 47.55 KNS Vc= 93.18 KNS Vs= 0.00 KNS
Tu= 17.23 KN-MET Tc= 3.4 KN-MET Ts= 23.0 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.18 SQ.CM.

___ 80J____________________ 3050X 300X 400_____________________ 8J____


| |
||=========================================================================||
| 2No16 H 341.| 0.TO 1100| | | | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 4No20 H |61.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 184 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 4 - 16MM 0. 3050. YES YES


2 343. 3 - 12MM 0. 698. YES NO
3 333. 2 - 32MM 0. 3050. YES YES

B E A M N O. 184 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 10.14 KNS Vc= 88.73 KNS Vs= 0.00 KNS
Tu= 13.06 KN-MET Tc= 3.3 KN-MET Ts= 17.4 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.92 SQ.CM.

AT END SUPPORT - Vu= 50.05 KNS Vc= 88.73 KNS Vs= 0.00 KNS
Tu= 13.06 KN-MET Tc= 3.3 KN-MET Ts= 17.4 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.92 SQ.CM.

___ 81J____________________ 3050X 300X 400_____________________ 11J____


| |
||=========================================================================||
| 3No12 H 343.| 0.TO 3698| | | | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 4No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | OO | | OO | | OO | | OO |
| 2#32 | | 2#32 | | 2#32 | | 2#32 | | 2#32 |
| | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 185 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3050. YES YES


2 343. 2 - 12MM 0. 698. YES NO
3 339. 4 - 20MM 0. 3050. YES YES

B E A M N O. 185 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.40 KNS Vc= 85.68 KNS Vs= 0.00 KNS
Tu= 8.60 KN-MET Tc= 3.4 KN-MET Ts= 11.5 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.58 SQ.CM.

AT END SUPPORT - Vu= 43.31 KNS Vc= 87.96 KNS Vs= 0.00 KNS
Tu= 8.60 KN-MET Tc= 3.4 KN-MET Ts= 11.5 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.58 SQ.CM.

___ 82J____________________ 3050X 300X 400_____________________ 14J____


| |
||=========================================================================||
| 2No12 H 343.| 0.TO 3698| | | | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 2No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 186 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 2 - 25MM 0. 3050. YES YES


2 341. 2 - 16MM 0. 1100. YES NO
3 337. 4 - 25MM 0. 3050. YES YES

B E A M N O. 186 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 10.75 KNS Vc= 85.58 KNS Vs= 0.00 KNS
Tu= 18.59 KN-MET Tc= 3.4 KN-MET Ts= 24.8 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.59 SQ.CM.

AT END SUPPORT - Vu= 49.50 KNS Vc= 91.50 KNS Vs= 0.00 KNS
Tu= 18.59 KN-MET Tc= 3.4 KN-MET Ts= 24.8 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.59 SQ.CM.

___ 83J____________________ 3050X 300X 400_____________________ 23J____


| |
||=========================================================================||
| 2No16 H 341.| 0.TO 1100| | | | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 2No25 H |63.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 2#25 | | 2#25 | | 2#25 | | 2#25 | | 2#25 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 187 DESIGN RESULTS


=============================================
LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 3 - 16MM 0. 3050. YES YES


2 343. 2 - 12MM 0. 698. YES NO
3 337. 3 - 25MM 0. 3050. YES YES

B E A M N O. 187 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 9.22 KNS Vc= 89.02 KNS Vs= 0.00 KNS
Tu= 14.50 KN-MET Tc= 3.3 KN-MET Ts= 19.3 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.36 SQ.CM.

AT END SUPPORT - Vu= 51.35 KNS Vc= 89.02 KNS Vs= 0.00 KNS
Tu= 14.50 KN-MET Tc= 3.3 KN-MET Ts= 19.3 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.36 SQ.CM.

___ 84J____________________ 3050X 300X 400_____________________ 26J____


| |
||=========================================================================||
| 2No12 H 343.| 0.TO 3698| | | | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 3No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 188 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3050. YES YES


2 343. 2 - 12MM 0. 444. YES NO
3 339. 3 - 20MM 404. 3050. NO YES

B E A M N O. 188 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 7.82 KNS Vc= 85.59 KNS Vs= 0.00 KNS
Tu= 10.67 KN-MET Tc= 3.4 KN-MET Ts= 14.2 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.21 SQ.CM.

AT END SUPPORT - Vu= 46.57 KNS Vc= 88.15 KNS Vs= 0.00 KNS
Tu= 10.67 KN-MET Tc= 3.4 KN-MET Ts= 14.2 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.21 SQ.CM.

___ 85J____________________ 3050X 300X 400_____________________ 29J____


| |
||=========================================================================||
| 2No12 H 343.20 0.TO9.4444.TO|3050 | | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 2No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 189 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3050. YES YES


2 343. 2 - 12MM 0. 1207. YES NO
3 341. 3 - 16MM 552. 3050. NO YES

B E A M N O. 189 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 5.75 KNS Vc= 85.99 KNS Vs= 0.00 KNS
Tu= 10.46 KN-MET Tc= 3.5 KN-MET Ts= 14.0 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.15 SQ.CM.

AT END SUPPORT - Vu= 18.45 KNS Vc= 88.12 KNS Vs= 0.00 KNS
Tu= 10.46 KN-MET Tc= 3.5 KN-MET Ts= 14.0 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.15 SQ.CM.
___ 89J____________________ 3050X 300X 400_____________________ 35J____
| |
||=========================================================================||
| 2No12 H 343.3No0.TO 1207|552.TO 3050| | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 2No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 190 DESIGN RESULTS


=============================================

LEN - 3050. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3050. YES YES


2 343. 2 - 12MM 0. 1207. YES NO
3 341. 3 - 16MM 552. 3050. NO YES

B E A M N O. 190 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 6.10 KNS Vc= 86.02 KNS Vs= 0.00 KNS
Tu= 11.05 KN-MET Tc= 3.5 KN-MET Ts= 14.7 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.32 SQ.CM.

AT END SUPPORT - Vu= 18.80 KNS Vc= 87.97 KNS Vs= 0.00 KNS
Tu= 11.05 KN-MET Tc= 3.5 KN-MET Ts= 14.7 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 1189. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.32 SQ.CM.

___ 90J____________________ 3050X 300X 400_____________________ 32J____


| |
||=========================================================================||
| 2No12 H 343.3No0.TO 1207|552.TO 3050| | | | | | | | | | |
| 11*12c/c131 | | | | | | | | | | | | 11*12c/c131 | |
| 2No16 H |59.| 0.TO 3050| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 193 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 2600. YES YES


2 243. 2 - 12MM 0. 991. YES NO
3 243. 2 - 12MM 1934. 2600. NO YES

B E A M N O. 193 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.18 KNS Vc= 47.59 KNS Vs= 0.00 KNS
Tu= 2.13 KN-MET Tc= 1.2 KN-MET Ts= 2.8 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.10 SQ.CM.

AT END SUPPORT - Vu= 7.06 KNS Vc= 40.84 KNS Vs= 0.00 KNS
Tu= 2.13 KN-MET Tc= 1.2 KN-MET Ts= 2.8 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.10 SQ.CM.

___ 80J____________________ 2599X 200X 300_____________________ 86J____


| |
||=========================== ===================||
| 2No12 H 243.| 0.TO 991| 2No12|H 243.1934.TO 2600 |
| 15*12c/c 81 | | | | | | | 15*12c/c 81 | |
| 3No12 H 57.| 0.TO 2600| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 194 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 2600. YES YES
2 243. 2 - 12MM 0. 775. YES NO
3 243. 2 - 12MM 2150. 2600. NO YES

B E A M N O. 194 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.32 KNS Vc= 41.85 KNS Vs= 0.00 KNS
Tu= 1.98 KN-MET Tc= 1.2 KN-MET Ts= 2.6 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.03 SQ.CM.

AT END SUPPORT - Vu= 9.39 KNS Vc= 41.85 KNS Vs= 0.00 KNS
Tu= 1.98 KN-MET Tc= 1.2 KN-MET Ts= 2.6 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.03 SQ.CM.

___ 81J____________________ 2599X 200X 300_____________________ 87J____


| |
||===================== =============||
| 2No12 H 243.| 0.TO 775 2No12 H 243.2150.TO 2600 |
| 15*12c/c 81 | | | 15*12c/c 81 | |
| 3No12 H 57.| 0.TO 2600 | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | | | | | oo |
| 2#12 | | 2#12 | | | | | | 2#12 |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 195 DESIGN RESULTS


=============================================

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 2600. YES YES


2 243. 2 - 12MM 0. 775. YES NO

B E A M N O. 195 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 26.19 KNS Vc= 41.61 KNS Vs= 0.00 KNS
Tu= 1.44 KN-MET Tc= 1.2 KN-MET Ts= 1.9 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.74 SQ.CM.

AT END SUPPORT - Vu= 10.05 KNS Vc= 41.61 KNS Vs= 0.00 KNS
Tu= 1.44 KN-MET Tc= 1.2 KN-MET Ts= 1.9 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1063. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.74 SQ.CM.

___ 82J____________________ 2599X 200X 300_____________________ 88J____


| |
||===================== |
| 2No12 H 243.| 0.TO 775 |
| 15*12c/c 81 | | | 15*12c/c 81 |
| 3No12 H 57.| 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | | | | | |
| 2#12 | | 2#12 | | | | | | |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 197 DESIGN RESULTS


=============================================

LEN - 1902. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 1902. YES YES


2 243. 2 - 12MM 0. 1902. YES YES

B E A M N O. 197 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.89 KNS Vc= 41.84 KNS Vs= 0.00 KNS
Tu= 2.79 KN-MET Tc= 1.2 KN-MET Ts= 3.7 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 715. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.45 SQ.CM.

AT END SUPPORT - Vu= 30.00 KNS Vc= 41.84 KNS Vs= 0.00 KNS
Tu= 2.79 KN-MET Tc= 1.2 KN-MET Ts= 3.7 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 715. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.45 SQ.CM.

___ 86J____________________ 1902X 200X 300_____________________ 83J____


| |
||=========================================================================||
| 2No12 H 243.| 0.TO 1902| | | | | | | | | | | | | |
| 10*12c/c 81 | | | | | | | | | | | | 10*12c/c 81 | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 198 DESIGN RESULTS


=============================================

LEN - 1902. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 1902. YES YES


2 243. 2 - 12MM 689. 1902. NO YES

B E A M N O. 198 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 5.48 KNS Vc= 42.15 KNS Vs= 0.00 KNS
Tu= 2.61 KN-MET Tc= 1.2 KN-MET Ts= 3.5 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 715. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.35 SQ.CM.

AT END SUPPORT - Vu= 31.48 KNS Vc= 42.15 KNS Vs= 0.00 KNS
Tu= 2.61 KN-MET Tc= 1.2 KN-MET Ts= 3.5 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 715. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.35 SQ.CM.

___ 87J____________________ 1902X 200X 300_____________________ 84J____


| |
| ================================================||
| 2No12 H 243. 689.TO 1902 | | | | | | |
| 10*12c/c 81 | | | | | | | | 10*12c/c 81 | |
| 3No12 H 57. 0.TO 1902 | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| | | | | oo | | oo | | oo |
| | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 199 DESIGN RESULTS


=============================================

LEN - 951. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 951. YES YES


2 243. 2 - 12MM 570. 951. NO YES

B E A M N O. 199 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.09 KNS Tu= 5.1 KN-MET


Vc= 41.6 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 10.63 KNS Tu= 5.1 KN-MET
Vc= 41.6 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 21 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 88J____________________ 951X 200X 300_____________________ 92J____


| |
| ==============================||
| 2No12 H 243. 570.TO 951 |
| |
| 3No12 H 57. 0.TO 951 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| | | | | | | oo | | oo |
| | | | | | | 2#12 | | 2#12 |
| | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 201 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 435. 1127. NO NO


2 243. 2 - 12MM 0. 1500. YES YES

B E A M N O. 201 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.12 KNS Vc= 42.44 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.74 KNS Vc= 42.44 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
___ 48J____________________ 1500X 200X 300_____________________ 88J____
| |
||=========================================================================||
| 2No12 H 243. 0.TO 1500 |
| |
| 2No12 H 57. 435.TO 1127 |
| ==================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | 2#12 | | 2#12 | | |
| | | | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 202 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 243. 2 - 12MM 0. 1500. YES YES

B E A M N O. 202 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.53 KNS Vc= 40.42 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.48 KNS Vc= 40.42 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 47J____________________ 1500X 200X 300_____________________ 87J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 1500 |
| |
| |
| |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 203 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS


LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 561. 1001. NO NO


2 243. 2 - 12MM 0. 1500. YES YES

B E A M N O. 203 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.52 KNS Vc= 40.42 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.48 KNS Vc= 40.42 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 46J____________________ 1500X 200X 300_____________________ 86J____


| |
||=========================================================================||
| 2No12 H 243. 0.TO 1500 |
| |
| 2No12 H 57. 561.TO 1001 |
| ======================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| | | | | 2#12 | | | | |
| | | | | oo | | | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 204 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4356. YES NO


2 243. 2 - 12MM 0. 4502. YES YES

B E A M N O. 204 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 7.20 KNS Vc= 44.96 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 7.03 KNS Vc= 47.17 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 90J____________________ 4502X 200X 300_____________________ 89J____


| |
| 2No12 H 243. 0.TO 4502 |
| |
| 2No12 H 57. 0.TO 4356 |
||======================================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 205 DESIGN RESULTS


=============================================

LEN - 4502. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 4 - 12MM 0. 4502. YES YES


2 343. 5 - 12MM 0. 4502. YES YES

B E A M N O. 205 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 33.52 KNS Vc= 87.05 KNS Vs= 0.00 KNS
Tu= 0.62 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1915. MM

AT END SUPPORT - Vu= 6.56 KNS Vc= 91.74 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 3.4 KN-MET Ts= 0.0 KN-MET LOAD 9
STIRRUPS ARE NOT REQUIRED.

___ 72J____________________ 4502X 300X 400_____________________ 75J____


| |
||=========================================================================||
| 5No12 H 343.| 0.TO 4502| | | | | |
| 13*12c/c172 | | | | | | | | | |
| 4No12 H 57.| 0.TO 4502| | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 4#12 | | 4#12 | | 4#12 | | 4#12 | | 4#12 |
| oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 206 DESIGN RESULTS


=============================================
LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 1500. YES YES


2 343. 5 - 12MM 0. 1500. YES YES

B E A M N O. 206 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 28.46 KNS Vc= 92.91 KNS Vs= 0.00 KNS
Tu= 12.58 KN-MET Tc= 3.5 KN-MET Ts= 16.8 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.78 SQ.CM.

AT END SUPPORT - Vu= 25.06 KNS Vc= 89.76 KNS Vs= 0.00 KNS
Tu= 12.58 KN-MET Tc= 3.5 KN-MET Ts= 16.8 KN-MET LOAD 23
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.78 SQ.CM.

___ 75J____________________ 1500X 300X 400_____________________ 90J____


| |
||=========================================================================||
| 5No12 H|343. |0.TO 1500 | | | | | | |
| 5*12c/c131 | | | | | | 5*12c/c131 | |
| 2No16 H| 59. |0.TO 1500 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 207 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 1500. YES YES


2 343. 5 - 12MM 0. 1500. YES YES

B E A M N O. 207 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.11 KNS Vc= 91.94 KNS Vs= 0.00 KNS
Tu= 12.32 KN-MET Tc= 3.5 KN-MET Ts= 16.4 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.70 SQ.CM.

AT END SUPPORT - Vu= 25.71 KNS Vc= 90.54 KNS Vs= 0.00 KNS
Tu= 12.32 KN-MET Tc= 3.5 KN-MET Ts= 16.4 KN-MET LOAD 24
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.70 SQ.CM.

___ 72J____________________ 1500X 300X 400_____________________ 89J____


| |
||=========================================================================||
| 5No12 H|343. |0.TO 1500 | | | | | | |
| 5*12c/c131 | | | | | | 5*12c/c131 | |
| 2No16 H| 59. |0.TO 1500 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
___________ ___________ ___________ ___________ ___________
| | | | | | | | | |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 237 DESIGN RESULTS


=============================================

LEN - 951. MM FY - 414. FC - 28. MPA, SIZE - 300. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 5 - 12MM 0. 951. YES YES


2 337. 4 - 25MM 0. 951. YES YES

B E A M N O. 237 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 75.57 KNS Tu= 24.8 KN-MET


Vc= 89.1 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 22 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 79.22 KNS Tu= 24.8 KN-MET
Vc= 89.1 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 22 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 91J____________________ 951X 300X 400_____________________ 42J____


| |
||=========================================================================||
| 4No25 H 337. 0.TO 951 |
| |
| 5No12 H 57. 0.TO 951 |
||=========================================================================||
| |
|___________________________________________________________________________|
| | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | |
| 5#12 | | 5#12 | | 5#12 | | 5#12 | | 5#12 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | |
|___________| |___________| |___________| |___________| |___________|

ACI 318-11 BEAM NO. 238 DESIGN RESULTS


=============================================

LEN - 951. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 951. YES YES


2 243. 2 - 12MM 0. 951. YES YES

B E A M N O. 238 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.80 KNS Vc= 41.61 KNS Vs= 0.00 KNS
Tu= 2.41 KN-MET Tc= 1.2 KN-MET Ts= 3.2 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 239. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.25 SQ.CM.

AT END SUPPORT - Vu= 35.87 KNS Vc= 41.61 KNS Vs= 6.22 KNS
Tu= 2.41 KN-MET Tc= 1.2 KN-MET Ts= 3.2 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 239. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.25 SQ.CM.

___ 92J____________________ 951X 200X 300_____________________ 85J____


| |
||=========================================================================||
| 2No12 H|243. |0.TO 951 | | | | |
| 4*12c/c 81 | | | | 4*12c/c 81 | |
| 2No12 H| 57. |0.TO 951 | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 239 DESIGN RESULTS


=============================================

LEN - 1500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 52. 1500. NO YES


2 243. 3 - 12MM 0. 1500. YES YES

B E A M N O. 239 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 16.14 KNS Vc= 41.52 KNS Vs= 0.00 KNS
Tu= 3.40 KN-MET Tc= 1.1 KN-MET Ts= 4.5 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 514. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.76 SQ.CM.

AT END SUPPORT - Vu= 12.32 KNS Vc= 41.52 KNS Vs= 0.00 KNS
Tu= 3.40 KN-MET Tc= 1.1 KN-MET Ts= 4.5 KN-MET LOAD 21
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 514. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.76 SQ.CM.

___ 91J____________________ 1500X 200X 300_____________________ 92J____


| |
||=========================================================================||
| 3No12|H 243. 0.TO 1500 | | | | | | | | | | |
| 8*12c/c 81 | | | | | | | | | 8*12c/c 81| |
| |2No12 H 57. 52.TO|1500| | | | | | | | | | |
| =========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________
| | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo |
| | | | | | | | | |
|_________| |_________| |_________| |_________| |_________|

********************END OF BEAM DESIGN**************************

237. DESIGN COLUMN 10 11 13 TO 20 30 31 33 TO 40 53 TO 58 157 158 164 165 172 TO 177

ACI 318-11 COLUMN NO. 10 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4757.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 16 MM 1.930 31 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 256.00 MM
ACI 318-11 COLUMN NO. 11 DESIGN RESULTS
===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3830.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 25 MM 1.571 23 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 13 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3812.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 25 MM 1.571 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 14 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4145.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 16 MM 1.930 31 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 15 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2657.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 12 MM 1.086 31 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 16 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3200.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------

4 - 32 MM 1.287 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 17 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3130.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

28 - 12 MM 1.267 31 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 18 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 19 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2640.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 12 MM 1.086 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 20 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------
8 - 20 MM 1.005 9 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 30 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4460.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 16 MM 1.930 30 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 256.00 MM

ACI 318-11 COLUMN NO. 31 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4075.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 16 MM 1.930 32 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 33 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 5107.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

28 - 16 MM 2.252 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 256.00 MM

ACI 318-11 COLUMN NO. 34 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3812.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 25 MM 1.571 32 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM
ACI 318-11 COLUMN NO. 35 DESIGN RESULTS
===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 36 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4232.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 16 MM 1.930 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 256.00 MM

ACI 318-11 COLUMN NO. 37 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2885.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

28 - 12 MM 1.267 32 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 38 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 39 DESIGN RESULTS


===============================================
FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED
AREA OF STEEL REQUIRED = 3270.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

32 - 12 MM 1.448 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 40 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 53 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 54 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 55 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 56 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 57 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 58 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 2500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 20 MM 1.005 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 320.00 MM

ACI 318-11 COLUMN NO. 157 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3900.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------
8 - 25 MM 1.571 32 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 158 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2692.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

24 - 12 MM 1.086 29 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 164 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3672.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 1.508 23 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 165 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 500.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2902.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

28 - 12 MM 1.267 31 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

ACI 318-11 COLUMN NO. 172 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 225.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 12 MM 2.011 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM
ACI 318-11 COLUMN NO. 173 DESIGN RESULTS
===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED


AREA OF STEEL REQUIRED = 360.4 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 12 MM 2.011 23 STA 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 174 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED


AREA OF STEEL REQUIRED = 752.6 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 16 MM 3.574 23 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 175 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 225.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 12 MM 2.011 9 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 176 DESIGN RESULTS


===============================================

FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED


AREA OF STEEL REQUIRED = 355.7 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 12 MM 2.011 23 STA 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 177 DESIGN RESULTS


===============================================
FY - 413.7 FC - 27.6 MPA, SQRE SIZE - 150.0 X 150.0 MMS, TIED
AREA OF STEEL REQUIRED = 684.9 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 16 MM 3.574 23 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

********************END OF COLUMN DESIGN RESULTS********************

238. CONCRETE TAKE


239. END CONCRETE DESIGN
************** CONCRETE TAKE OFF **************
(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.

TOTAL VOLUME OF CONCRETE = 45.0 CU.METER

BAR SIZE WEIGHT


NUMBER (in lbs)
-------- --------
12 4399
16 1920
20 2706
25 2993
32 736
------------
*** TOTAL= 12755

240. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAY 21,2025 TIME= 10:54:41 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2016 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

You might also like