0% found this document useful (0 votes)
17 views30 pages

004 Instrument Cluster

The document provides detailed information about the instrument cluster of a vehicle, including various gauges, meters, and warning lights. It outlines the functions of each component, such as the speedometer, tachometer, fuel gauge, and various warning indicators, along with safety warnings regarding their use. Additionally, it covers settings related to the cluster display and infotainment system adjustments.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views30 pages

004 Instrument Cluster

The document provides detailed information about the instrument cluster of a vehicle, including various gauges, meters, and warning lights. It outlines the functions of each component, such as the speedometer, tachometer, fuel gauge, and various warning indicators, along with safety warnings regarding their use. Additionally, it covers settings related to the cluster display and infotainment system adjustments.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 30

4.

Instrument Cluster

Instrument Cluster...........................................................................................................4-2
Instrument cluster control...........................................................................................4-3
Gauges and meters......................................................................................................4-3
Transmission shift indicator ........................................................................................4-8
Warning and indicator lights.......................................................................................4-9
Cluster display messages.......................................................................................... 4-22
Cluster Display ...............................................................................................................4-26
Cluster display control...............................................................................................4-26
View modes................................................................................................................4-26
Vehicle Settings (infotainment System) ......................................................................4-29
Setting your vehicle ...................................................................................................4-30
4
Instrument Cluster

Instrument Cluster
Type A

1C_ClusterOverview
Type B

1C_ClusterOverview_2
The actual cluster in the vehicle may differ from the illustration. For more information,
refer to the "Gauges and meters" section in this chapter.
(1) Tachometer
(2) Speedometer
(3) Engine coolant temperature gauge
(4) Fuel gauge
(5) Warning and indicator lights
(6) Cluster display

4-2
4
Instrument cluster control WARNING
Never adjust the instrument cluster while
Instrument panel illumination driving. This could result in loss of control
and lead to an accident that may cause
Control switch
death, serious injury, or vehicle damage.

Gauges and meters

Speedometer
Type A

2C_IlluminationControlSwitch
When the vehicle's parking lights or
headlights are on, press the illumination
control switch to adjust the brightness of
the instrument panel illumination.
When pressing the illumination control
switch, the interior switch illumination
intensity is also adjusted. 2C_Speedmeter
Type B
WARNING
Never adjust the instrument panel
illumination while driving to prevent
death, serious injury, or vehicle damage.

• The brightness of the instrument panel


illumination is displayed.
• When the brightness setting reaches
either the minimum or maximum level,
a chime sounds.
2C_Speedmeter_2

Infotainment system The speedometer indicates the speed of


the vehicle and is calibrated in kilometers
You can adjust the brightness of the
per hour (km/h) and/or miles per hour
instrument panel illumination from the
(MPH).
Settings menu in the infotainment
system. Select:
• Setup > Cluster > Illumination

4-3
Instrument Cluster

Tachometer Engine coolant temperature gauge


Type A Type A

2C_Tachometer 2C_EngineCoolantTempGauge
Type B Type B

2C_Tachometer_2 2C_EngineCoolantTempGauge_2
The tachometer indicates the The engine coolant temperature gauge
approximate number of engine indicates the temperature of the engine
revolutions per minute (RPM). coolant when the Engine Start/Stop
Use the tachometer to monitor the engine button is in the ON position.
RPM.
NOTICE
NOTICE If the gauge pointer moves beyond the
Do not operate the engine within the normal range area toward the H (Hot)
tachometer's RED ZONE to prevent position, it indicates overheating that
severe engine damage. may damage the engine.
Do not continue driving with an
overheated engine. If your vehicle
overheats, refer to the "If The Engine
Overheats" section in chapter 8.

4-4
4
WARNING Information
Never remove the engine coolant • The fuel tank capacity is given in
reservoir cap when the engine is hot. The chapter 2.
engine coolant is under pressure and may • The fuel gauge is supplemented by a
cause burn or injury. Wait until the engine low fuel warning light, that illuminates
is cool before adding coolant to the when the fuel tank is nearly empty.
reservoir.
• On inclines or curves, the fuel gauge
may fluctuate or the low fuel warning
light may come on earlier than usual
Fuel gauge
due to the movement of fuel in the tank.
Type A
• More than 6 liters (1.5 gallon) of fuel
should be added to the vehicle for the
fuel gauge to increase.

WARNING
• Running out of fuel can expose vehicle
occupants to danger.
• Always refuel the vehicle as soon as
possible after the warning light comes
2C_FuelGauge on or when the gauge indicator comes
Type B close to the E (Empty) level.

NOTICE
• Avoid driving with an extremely low
fuel level. Running out of fuel may
cause the engine to misfire and cause
damage to the catalytic converter (if
equipped).
• If the gearshift is not in P (Park) or N
2C_FuelGauge_2
(Neutral) when refueling, fueling may
not be recognized, and the fuel amount
The fuel gauge indicates the approximate
and the distance to empty may appear
amount of fuel remaining in the fuel tank.
abnormally.
• The amount of fuel remaining may be
recognized abnormally if fueled with
the vehicle tilted or the battery cable
disconnected.

4-5
Instrument Cluster

Outside temperature gauge


Type A
Information
The infotainment system may change
after software updates. For more
information, refer to the user's manual
provided in the infotainment system and
the quick reference guide.

Odometer
Type A

2C_OutsideTemp
Type B

2C_Odometer
Type B

2C_OutsideTemp_2
The outside ambient temperature
appears in the lower portion of the cluster
display. The temperature reads in
Fahrenheit or Celsius depending on the
units selected from the Settings menu in
the instrument cluster or infotainment
system.
The temperature indicated on the
instrument cluster may not change as 2C_Odometer_2

quickly as the outside temperature. The odometer indicates the total distance
Select: that the vehicle has been driven and is
• Setup > General > Units > used to determine when periodic
Temperature Unit > °C/°F maintenance is required.
Both the temperature unit on the cluster
display and climate control information
screen is changed.

4-6
4
Distance to empty • The distance to empty may differ from
Type A the actual driving distance because it is
only an estimate of the available driving
distance.
• The distance to empty may differ
significantly based on driving
conditions, driving habits, and
condition of the vehicle.
• If the vehicle is not on level ground or
the battery power has been
interrupted, the distance to empty
function may not operate correctly until
the vehicle has been driven enough for
2C_DistanceToEmpty
the system to recalculate.
Type B
• The distance to empty indicator may
not change accurately if less than 6
liters (1.5 gallons) of fuel are added to
the vehicle.

2C_DistanceToEmpty_2
The distance to empty is the estimated
distance the vehicle can be driven with
the remaining fuel.
If the estimated distance is below 1 km (1
mi.), the trip computer displays '---' as the
distance to empty. If this occurs, refuel
the vehicle immediately.

4-7
Instrument Cluster

Transmission shift indicator Dual clutch transmission shift


indicator
Type A
Automatic transmission shift
indicator
Type A

2C_DCTPosition
Type B

2C_ATPosition
Type B

2C_DCTPosition_2
This indicator informs the current gear
engaged.
2C_ATPosition_2
This indicator informs the current gear
engaged.

4-8
4
Dual clutch transmission shift Warning and indicator lights
indicator in manual shift mode
if equipped Information
Type A Make sure that all warning lights are OFF
after starting the engine. If any light is still
ON, this indicates a situation that needs
attention.

Seat belt warning light

2C_DCTPositionManual
Type B

WL_SeatBeltWarningLamp
This warning light informs the driver that
the seat belt is not fastened.
For more information, refer to the "Seat
Belts" section in chapter 3.

Airbag warning light

2C_DCTPositionManual_2
In the manual shift mode, this indicator
informs which gear is recommended
while driving, to save fuel.
• Shifting up: 2, 3, 4, 5, 6, 7, WL_AirbagWarningLamp
8
• Shifting down: 1, 2, 3, 4, 5, 6, This warning light illuminates:
7 • When the Engine Start/Stop button is in
For example, the ON position. It illuminates for 3-6
seconds and then goes off.
or :
• When there is a malfunction with the
Indicates that shifting up to the 4th gear is
Safety Restraint System (SRS).
recommended (currently the gear is in
the 3rd gear). If the Airbag warning light remains
illuminated while driving, have your
When the system is not working properly,
vehicle inspected by an authorized
the indicator is not displayed.
HYUNDAI dealer.

4-9
Instrument Cluster

Parking brake warning light Dual-diagonal braking system


Your vehicle is equipped with the
dual-diagonal braking system. This
means you still have braking on two
wheels even if one of the dual systems
should fails.
With only one of the dual systems
working, more than normal pedal travel
WL_BreakWarningLamp and greater pedal force are required to
stop the vehicle.
This warning light illuminates:
Also, the vehicle does not stop in a short
• When the Engine Start/Stop button is in
distance if only a portion of the braking
the ON position. It illuminates for about
system is working.
3 seconds and then goes off once the
parking brake is released. If you experience a malfunction with the
braking system while driving, attempt to
• Whenever the parking brake is applied.
slow your vehicle by coasting or by using
• Whenever the brake fluid level in the engine braking.
reservoir is low.
- If the warning light illuminates with WARNING
the parking brake released, it If the parking brake warning light
indicates the brake fluid level in the illuminates with the parking brake
reservoir is low. released, it indicates that the brake fluid
level is low. Have your vehicle inspected
If the brake fluid level in the reservoir is by an authorized HYUNDAI dealer.
low:
1. Drive carefully to the nearest safe
location and stop your vehicle.
2. With the engine stopped, check the
brake fluid level immediately and add
fluid as required (For more information,
refer to the "Brake Fluid" section in
chapter 9). After adding brake fluid,
check all brake components for fluid
leaks. If a brake fluid leak is found, or if
the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have your vehicle
inspected by an authorized HYUNDAI
dealer.

4-10
4
Anti-lock Brake System (ABS) Electronic Brake Force Distribution
warning light (EBD) System warning light

WL_ABSWarningLamp WL_EBDWarningLamp

This warning light illuminates: These two warning lights illuminate at the
• When the Engine Start/Stop button is in same time while driving:
the ON position. It illuminates for about When the ABS and brake system does not
3 seconds and then goes off. work normally.
• Whenever there is a malfunction with If both the ABS warning light and the
the ABS. Parking Brake warning light remain
The hydraulic braking system still illuminated while driving, have your
operates even if there is a malfunction vehicle inspected by an authorized
with the ABS. If the ABS warning light HYUNDAI dealer.
remains illuminated while driving, have
your vehicle inspected by an authorized WARNING
HYUNDAI dealer. When both ABS and Parking Brake
warning lights are on, the braking system
does not work normally and you may
experience an unexpected and
dangerous situation during sudden
braking.
Avoid high speed driving and abrupt
braking.
Have your vehicle inspected by an
authorized HYUNDAI dealer as soon as
possible.

Information
When the ABS warning light is on or both
ABS and Parking Brake warning lights are
on, the speedometer, odometer, or
tripmeter may not work. Also, the MDPS
warning light may illuminate and the
steering effort may increase or decrease.

4-11
Instrument Cluster

Motor Driven Power Steering Charging system warning light


(MDPS) warning light

WL_ChargingSystemWarningLamp
WL_PowerStreeringWarningLamp
This warning light illuminates:
This warning light illuminates: When there is a malfunction with either
• When the Engine Start/Stop button is in the alternator or electrical charging
the ON position. It illuminates for about system.
3 seconds and then goes off.
• Whenever there is a malfunction with If there is a malfunction with either the
the Motor Driven Power Steering. alternator or electrical charging system:
If the MDPS warning light remains 1. Drive carefully to the nearest safe
illuminated while driving, have your location and stop your vehicle.
vehicle inspected by an authorized 2. Turn the engine off and check the
HYUNDAI dealer. alternator drive belt for looseness or
breakage.
If the belt is adjusted properly, there
may be a problem in the electrical
charging system.
If the Charging system warning light
remains illuminated while driving, have
your vehicle inspected by an authorized
HYUNDAI dealer.

4-12
4
Engine oil pressure warning light
Information
When engine oil pressure decreases due
to insufficient engine oil, etc., the Engine
Oil Pressure warning light illuminates. In
addition, the enhanced engine protection
system that limits engine power is
activated. If the engine oil pressure is
WL_EngineOilPressureWarningLamp restored, the Engine Oil Pressure warning
light and the enhanced engine protection
This warning light illuminates: system turn off. However, for gasoline 2.5
When the engine oil pressure is low. GDI & 2.5 T-GDI engine, when the engine
oil pressure is restored, the warning light
If the engine oil pressure is low: and the enhanced engine protection
system turn off after the engine is
1. Drive carefully to the nearest safe
restarted.
location and stop your vehicle.
2. Turn the engine off and check the
engine oil level (For more information, Low fuel level warning light
refer to the "Engine Oil" in chapter 9). If
the level is low, add oil as required.
If the warning light remains on after
adding oil or if oil is not available, have
your vehicle inspected by an authorized
HYUNDAI dealer as soon as possible.

NOTICE WL_LowFuelLevelWarningLamp

• Continued driving with the warning


This warning light illuminates:
light on may cause engine failure.
When the fuel tank is nearly empty.
• If the engine is not stopped
immediately after the Engine Oil Refuel the vehicle as soon as possible.
Pressure warning light is illuminated,
severe damage could result. NOTICE
Driving with the Low Fuel Level warning
light on or with the fuel level below E
(Empty) may cause the engine to misfire
and damage the catalytic converter (if
equipped).

4-13
Instrument Cluster

Malfunction Indicator Lamp (MIL) Master warning light

WL_EngineWarningLamp WL_MasterWarningLamp

This indicator light illuminates: This warning light illuminates:


• When the Engine Start/Stop button is in When there is a malfunction in operation
the ON position. It illuminates for about in any of the following systems:
3 seconds and then goes off. • Forward Collision-Avoidance Assist
• Whenever there is a malfunction with malfunction
either the emission control system or • Forward Collision-Avoidance Assist
the engine or the vehicle powertrain. radar blocked
If the MIL warning light remains • Blind-Spot Collision-Avoidance Assist
illuminated while driving, have your malfunction (if equipped)
vehicle inspected by an authorized
HYUNDAI dealer. • Blind-Spot Collision-Avoidance Assist
radar blocked (if equipped)
• If the enhanced engine protection
system activates due to the lack of • Exterior light malfunction
engine oil, the engine power is limited. • Rear Cross-Traffic Collision-Avoidance
Assist malfunction (if equipped)
NOTICE • Rear Cross-Traffic Collision-Avoidance
• Driving with the Malfunction Indicator Assist radar blocked (if equipped)
Lamp (MIL) on may cause damage to • LED headlight malfunction
the emission control system that may • High Beam Assist malfunction
affect drivability and/or fuel economy.
• Smart Cruise Control malfunction
• If the Malfunction Indicator Lamp (MIL)
illuminates, catalytic converter (if • Smart Cruise Control radar blocked
equipped) damage is possible that may • Lane Following Assist malfunction
result in loss of engine power. • Door/Trunk malfunction
• Low washer fluid
• All Wheel Drive (AWD) malfunction
NOTICE
• Tire Pressure Monitoring System
• If the Malfunction Indicator Lamp (MIL) (TPMS) malfunction
illuminates, potential catalytic If the issue is resolved, the Master
converter damage is possible which Warning Light turns off.
could result in loss of engine power.
If this occurs, have your vehicle
inspected by an authorized HYUNDAI
dealer as soon as possible.

4-14
4
Electronic Parking Brake (EPB) Low tire pressure warning light
warning light

WL_TPMSWarningLamp
WL_EPBWarningLamp
This warning light illuminates:
This warning light illuminates: • When the Engine Start/Stop button is in
• When the Engine Start/Stop button is in the ON position. It illuminates for about
the ON position. It illuminates for about 3 seconds and then goes off.
3 seconds and then goes off. • When one or more tires are significantly
• Whenever there is a malfunction with under-inflated. (The location of the
EPB. under-inflated tire appears on the
If the EPB warning light remains cluster display.)
illuminated while driving, have your For more information, refer to the "Tire
vehicle inspected by an authorized Pressure Monitoring System (TPMS)"
HYUNDAI dealer. section in chapter 8.

Information This warning light remains ON after


blinking for about 60 seconds, or
The Electronic Parking Brake (EPB)
repeatedly blinks ON and OFF at 3 second
warning light may illuminate when the
intervals:
Electronic Stability Control (ESC)
indicator light comes on to indicate that When there is a malfunction with the
ESC is not working properly. This does not TPMS.
indicate malfunction of EPB. If this occurs, have your vehicle inspected
by an authorized HYUNDAI dealer as soon
as possible.
For more information, refer to the "Tire
Pressure Monitoring System (TPMS)"
section in chapter 8.

WARNING
• The TPMS cannot alert you to severe
and sudden tire damage caused by
external factors.
• If you notice any vehicle instability,
immediately take your foot off the
accelerator pedal, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.

4-15
Instrument Cluster

Driver Attention Warning light Lane Following Assist indicator light

WL_ConsiderTakingABreak WL_LFA

This indicator light illuminates: This indicator light illuminates:


• When the Engine Start/Stop button is in • When the Engine Start/Stop button is in
the ON position. It illuminates for about the ON position. It illuminates for about
3 seconds and then goes off. 3 seconds and then goes off.
• Yellow: When Driver Attention Warning • Green: When Lane Following Assist is
is disabled or a malfunction is detected. operating.
If the yellow indicator light remains on • gray: When Lane Following Assist
after the front view camera has been operating conditions are not satisfied.
uncovered or unblocked, have your
vehicle inspected by an authorized This indicator light blinks:
HYUNDAI dealer. • White: When the steering wheel assist
is canceled.
This indicator light blinks:
For more information, refer to the "Lane
• Yellow: Driver Attention Warning Following Assist (LFA)" section in chapter
recommends to take a break. 7.
For more information, refer to the "Driver
Attention Warning (DAW)" section in
chapter 7.

4-16
4
Lane Safety indicator light Forward Safety warning light

WL_LaneSafetyWarningLamp WL_FrontSafetyWarningLamp

This indicator light illuminates: This warning light illuminates:


• When the Engine Start/Stop button is in • When the Engine Start/Stop button is in
the ON position. It illuminates for about the ON position. It illuminates for about
3 seconds and then goes off. 3 seconds and then goes off.
• Gray: When Lane Keeping Assist • Yellow: When Forward Safety of
operating conditions are not satisfied. Forward Collision-Avoidance Assist is
• Green: When Lane Keeping Assist deselected, disabled, or a malfunction
operating conditions are satisfied. is detected.
• Yellow: When Lane Safety is disabled or If the yellow warning light remains on
a malfunction is detected. after the sensor has been uncovered or
unblocked when the Forward Safety is
If the yellow warning light remains on set, have your vehicle inspected by an
after the sensor has been uncovered or authorized HYUNDAI dealer.
unblocked when Lane Safety is set,
have your vehicle inspected by an This warning light blinks:
authorized HYUNDAI dealer.
• Red: When Forward Safety function is
This indicator light blinks: operating.
• Green: When Lane Keeping Assist is For more information, refer to the
operating. "Forward Collision-Avoidance Assist
(FCA) (Sensor Fusion)" section in chapter
For more information, refer to the "Lane 7.
Keeping Assist (LKA)" section in chapter 7.

4-17
Instrument Cluster

LED headlight warning light Electronic Stability Control (ESC)


indicator light

WL_LEDHeadlampWarningLamp
WL_ESCOperatingLamp
This warning light illuminates:
• When the Engine Start/Stop button is in This indicator light illuminates:
the ON position. It illuminates for about • When the Engine Start/Stop button is in
3 seconds and then goes off. the ON position. It illuminates for about
• Whenever there is a malfunction with a 3 seconds and then goes off.
LED headlight. • Whenever there is a malfunction with
If the LED Headlight warning light ESC system.
remains illuminated while driving, have If this occurs, have your vehicle
your vehicle inspected by an authorized inspected by an authorized HYUNDAI
HYUNDAI dealer. dealer as soon as possible.

This warning light blinks: This indicator light blinks:


Whenever there is a malfunction with a While ESC is operating.
LED headlight related part. For more information, refer to the
If this occurs, have your vehicle inspected "Electronic Stability Control (ESC)"
by an authorized HYUNDAI dealer as soon section in chapter 6.
as possible.

NOTICE
Driving with the LED Headlight warning
light on or blinking may reduce LED
headlight life.

4-18
4
Electronic Stability Control (ESC) This indicator light illuminates for a few
OFF indicator light seconds and goes off:
If the smart key is in the vehicle and the
Engine Start/Stop button is ON, but the
vehicle cannot detect the smart key.
If this occurs, have your vehicle inspected
by an authorized HYUNDAI dealer.

This indicator light blinks:


WL_ESCWarningLamp
Whenever there is a malfunction with the
This indicator light illuminates: immobilizer system.
• When the Engine Start/Stop button is in If this occurs, have your vehicle inspected
the ON position. It illuminates for about by an authorized HYUNDAI dealer.
3 seconds and then goes off.
• When you deactivate ESC system by Turn signal indicator light
pressing the ESC OFF button.
For more information, refer to the
"Electronic Stability Control (ESC)"
section in chapter 6.

Immobilizer indicator light


WL_TurnSignalLamp

This indicator light blinks:


When you operate the turn signal lever.
If any of the following occur, there may be
a malfunction with the turn signal system.
WL_ImmobilizerLamp • The turn signal indicator light
illuminates but does not blink.
This indicator light illuminates for up to 30 • The turn signal indicator light blinks
seconds: rapidly.
When the vehicle detects the smart key in • The turn signal indicator light does not
the vehicle with the Engine Start/Stop illuminate at all.
button in the ACC or ON position.
If any of these occur, have your vehicle
• At this time, you can start the engine. inspected by an authorized HYUNDAI
• The indicator light goes off after dealer.
starting the engine.

This indicator light blinks for a few


seconds:
When the smart key is not in the vehicle,
you cannot start the engine.

4-19
Instrument Cluster

High beam indicator light High Beam Assist indicator light

WL_HighBeamLamp WL_HBALamp

This indicator light illuminates: This indicator light illuminates:


• When the headlights are on and the When the high beam is on with the light
turn signal lever is moved to the high switch in the AUTO position.
beam position. • White: When High Beam Assist is ready
• When the turn signal lever is pulled into to operate.
the Flash-to-Pass position. • Green: When High Beam Assist is
operating.
Light ON indicator light If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
switches the high beam to low beam
automatically.
For more information, refer to the "High
Beam Assist (HBA)" section in chapter 5.

WL_LightOnLamp

This indicator light illuminates:


When the parking lights or headlights are
on.

4-20
4
AUTO HOLD indicator light Intelligent Speed Limit Assist
indicator light
if equipped

WL_AutoHoldWarningLamp

This indicator light illuminates: WL_ISLA


• White: When you activate Auto Hold by
pressing the AUTO HOLD switch. This indicator light illuminates:
• Green: When you stop the vehicle • When the Engine Start/Stop button is in
completely by depressing the brake the ON position. It illuminates for about
pedal with Auto Hold activated. 3 seconds and then goes off.
• Yellow: Whenever a malfunction with • Yellow: When Intelligent Speed Limit
the Auto Hold is detected. Assist is disabled, the front view camera
If the AUTO HOLD indicator light is blocked, or a malfunction is detected.
remains yellow while driving, have your If the yellow indicator light remains on
vehicle inspected by an authorized after the front view camera has been
HYUNDAI dealer. uncovered or unblocked, have your
For more information, refer to the vehicle inspected by an authorized
"Electronic Parking Brake (EPB)" section HYUNDAI dealer.
in chapter 6. For more information, refer to the
"Intelligent Speed Limit Assist (ISLA)"
section in chapter 7.
Speed Limiter indicator light
if equipped

WL_SpeedLimiterIndicatorLight

This indicator light illuminates:


When the speed limiter is enabled.
For more information, refer to the
"Manual Speed Limit Assist (MSLA)" in
chapter 7.

4-21
Instrument Cluster

Cluster display messages Press brake pedal to start engine


This message appears if the Engine
Start/Stop button is pressed repeatedly
Vehicle is On
without depressing the brake pedal.
This message appears if you open the
driver's door when the gear is in P (Park) Start the vehicle by depressing the brake
and the Engine Start/Stop button in the pedal and then pressing the Engine
ON or START position. Start/Stop button.
Turn the engine off before leaving the
vehicle. Key not in vehicle
This message appears if the smart key is
not in the vehicle when you have left the
Shift to P
vehicle with the Engine Start/Stop button
This message appears if the Engine in the ON or Start position.
Start/Stop button is pressed to the OFF
position without the gear in the P (Park) Always turn off the engine before leaving
position. your vehicle.
If this occurs, the Engine Start/Stop
button goes to the ACC position. Press START button again
If you cannot start the vehicle after the
Engine Start/Stop button is pressed,
Vehicle is in N. Press START button
attempt to start the engine by pressing
and shift to P
the Engine Start/Stop button again.
This message appears if you try to turn off
the vehicle with the gear in N (Neutral). If the warning message appears each
time you press the Engine Start/Stop
To turn off the vehicle: button, have your vehicle inspected by an
1. Press the Engine Start/Stop button. The authorized HYUNDAI dealer.
Engine Start/Stop button goes to the
ON position.
Press START button with key
2. Shift the gear to P (Park).
This message appears if the smart key is
3. Press the Engine Start/Stop button not detected when you press the Engine
again, then the vehicle turns off. Start/Stop button after accessing with
the smart key. Pressing the Engine
Low key battery Start/Stop button with the Smart key uses
a different antenna
When the Engine Start/Stop button is
pressed to the OFF position, a message
may appear, indicating the internal
battery of the smart key is low. Replace
the smart key battery.

4-22
4
Check BRAKE SWITCH fuse Door, Hood, trunk open indicator
This message appears if the brake switch
fuse is disconnected. Replace the fuse
before starting the engine.
If that is not possible, start the engine by
pressing the Engine Start/Stop button for
10 seconds in the ACC position.

Shift to P or N to start engine


This message appears if you try to start
the engine in any other position except P 2C_DoorOpenWarning
(Park) or N (Neutral). This warning appears if any door or hood
or trunk is left open. The warning
Information indicates which door is open on the
You can start the engine with the gear in cluster display.
N (Neutral). But, for your safety, always
start the engine with the vehicle in P CAUTION
(Park) with your foot depressing the brake Before driving the vehicle, confirm the
pedal. door, hood, and trunk are fully closed.

Battery discharging due to external Sunroof open indicator


electrical devices
if equipped
if equipped
This message appears if the vehicle
battery voltage is low or if a current draw
is detected that could drain the vehicle
battery.
Do not connect any external electronic
devices to the battery system or battery
discharge may occur.
If this message appears on the cluster and
there are no other external electronic
devices connected to the vehicle, have 2C_SonroofOpenWarning
your vehicle inspected by an authorized This warning appears if you turn off the
HYUNDAI dealer. engine when the sunroof is open.
It is recommended that you close the
sunroof securely before leaving your
vehicle. The sunroof may be left open or
tilted, but the vehicle will be more secure
when it is closed.

4-23
Instrument Cluster

Low tire pressure Wiper


Front

2C_TireLowPressureWarning
2C_FrontWiperMode
This warning message appears if the tire
pressure is low. The corresponding tire on This indicator displays which wiper speed
the vehicle is illuminated. is selected using the wiper control.
For more information, refer to the "Tire You can activate or deactivate
Pressure Monitoring System (TPMS)" Wiper/Lights display function from the
section in chapter 8. Settings menu in the infotainment
system. Select:
• Setup > Cluster > Content Selection >
Lights Wiper/Lights display

Information
The infotainment system may change
after software updates. For more
information, refer to the user's manual
provided in the infotainment system and
the quick reference guide.

Low washer fluid


2C_LightMode
This message appears if the washer fluid
This indicator displays which exterior light level in the reservoir is nearly empty.
is selected using the lighting control.
Have the washer fluid reservoir refilled.
You can activate or deactivate
Wiper/Lights display function from the
Settings menu in the infotainment Low fuel
system. Select: This message appears if the fuel tank is
• Setup > Cluster > Content Selection > almost out of fuel.
Wiper/Lights display When this message appears, the low fuel
level warning light on the cluster comes
on.
Refuel as soon as possible.

4-24
4
Engine overheated
This message appears when the engine
coolant temperature is above about 120
°C (248 °F). The engine is overheated and
may be damaged.
If your vehicle is overheated, refer to the
"If The Engine Overheats" section in
chapter 8.

Check turn signal


This message appears if the turn signal
lights are not operating properly.
Replace the burned out bulb with a new
one with the same wattage rating.

Check headlight LED


This message appears if there is a
problem with the LED headlight. Have
your vehicle inspected by an authorized
HYUNDAI dealer.

Check AWD/4WD
if equipped
This message appears if there is a
problem with the AWD. Have your vehicle
inspected by an authorized HYUNDAI
dealer as soon as possible.
For more information, refer to the "All
Wheel Drive (AWD)" section in chapter 6.

4-25
Instrument Cluster

Cluster Display

Cluster display control

2C_ClusterMenuSwitch

Switch Function

MODE button for changing modes

, MOVE switch for changing items

OK SELECT/RESET button for setting or resetting the selected item

Information
If equipped with an infotainment system, only the Settings menu in the infotainment
system is supported and not the instrument cluster.

View modes
View modes Explanation

This mode displays Driver Assistance system such as Lane Keeping


Driving Assist
Assist, Smart Cruise Control, and Lane Following Assist etc.

Turn by Turn This mode displays the navigation guidance.

This mode displays driving information such as the trip distance,


Utility
fuel economy and etc.

The information provided may differ depending on which functions are applicable to
your vehicle.

4-26
4
Driving Assist mode Utility view
Current Trip

2C_DrivingAssistMode

LKA/SCC/LFA/HDA 2C_DrivingInfo

Displays the state of Lane Keeping Assist, The trip computer mode displays
Smart Cruise Control, Lane Following information related to vehicle driving
Assist and Highway Driving Assist. For parameters including fuel economy,
more information, refer to each system tripmeter information, and vehicle speed.
information in Chapter 7.
Since Refueling
Turn by Turn (TBT) mode

2C_InfoAfterRefuel
After the vehicle has been refueled, the
2C_TurnByTurnMode
trip distance, total driving time and
Turn-by-turn navigation and distance/ average fuel economy appear.
time to destination appear when Turn by
To reset manually, press the OK button on
Turn mode is selected.
the steering wheel for more than 1 second
when "Since Refueling" appears.

4-27
Instrument Cluster

Since Reset Driving force distribution (AWD)


if equipped

2C_AccumulatedInfo
Accumulated trip distance, total driving 2C_4WDInfo
time, and average fuel economy appear. Information related to AWD driving force
The information is accumulated starting appears.
from the last reset. For more information, refer to the "All
To reset manually, press the OK button on Wheel Drive (AWD)" section in the
the steering wheel for more than 1 second chapter 6.
when "Since Reset" appears.

Tire pressure Additional information display


Driver Assistance

2C_TireLowPressureWarning
The tire pressure of each tire appears.
2C_ADASInfo
For more information, refer to the "Tire The current operation condition of
Pressure Monitoring System (TPMS)" Manual Speed Limit Assist, Smart Cruise
section in chapter 8. Control, Lane Following Assist, etc.
appears.

4-28
4
Master warning mode Vehicle Settings
Master warning light illuminates if one or
more of the following occurs: (infotainment System)
• Forward Collision-Avoidance Assist Vehicle Settings in the infotainment
malfunction system provides user options for a the
• Forward Collision-Avoidance Assist settings including door lock/unlock
radar blocked features, convenience features, driver
assistance settings, etc.
• Blind-Spot Collision-Avoidance Assist
malfunction (if equipped) Vehicle Settings menu
• Blind-Spot Collision-Avoidance Assist • Driver Assistance
radar blocked (if equipped) • Drive Mode
• Rear Cross-Traffic Collision-Avoidance • Climate
Assist malfunction (if equipped)
• Seat
• Rear Cross-Traffic Collision-Avoidance
Assist radar blocked (if equipped) • Lights
• Exterior light malfunction • Door
• LED headlight malfunction • Digital Keys
• High Beam Assist malfunction • Convenience
• Smart Cruise Control malfunction The information provided may differ
depending on which functions are
• Smart Cruise Control radar blocked available to your vehicle.
• Lane Following Assist malfunction
• Door/Trunk malfunction WARNING
• Low washer fluid Do not adjust the Vehicle Settings while
• Tire Pressure Monitoring System driving. You may be distracted from the
(TPMS) malfunction driving task and could collide.

4-29
Instrument Cluster

Setting your vehicle

2C_AVNOverview
1. Press the SETUP button on the main
keyboard.
2. Select Vehicle to change the settings
for features.

Information
The infotainment system may change
after software updates. For more
information, refer to the user's manual
provided in the infotainment system and
the quick reference guide.

4-30

You might also like